The changing milliarcsecond radio morphology of the gamma-ray binary LS 5039

LS 5039 is one of the few TeV emitting X-ray binaries detected so far. The powering source of its multiwavelength emission can be accretion in a microquasar scenario or wind interaction in a young nonaccreting pulsar scenario. Aims.To present new high-resolution radio images and compare them with the expected behavior in the different scenarios. Methods.We analyze Very Long Baseline Array (VLBA) radio observations that provide morphological and astrometric information at milliarcsecond scales. Results.We detect a changing morphology between two images obtained five days apart. In both runs there is a core component with a constant flux density, and an elongated emission with a position angle (PA) that changes by 12 $\pm$ $3\degr$ between both runs. The source is nearly symmetric in the first run and asymmetric in the second one. The astrometric results are not conclusive. Conclusions.A simple and shockless microquasar scenario cannot easily explain the observed changes in morphology. An interpretation within the young nonaccreting pulsar scenario requires the inclination of the binary system to be very close to the upper limit imposed by the absence of X-ray eclipses.

The first SEPServer event catalogue 68-MeV solar proton events observed at 1 AU in 1996-2010

SEPServer is a three-year collaborative project funded by the seventh framework programme (FP7-SPACE) of the European Union. The objective of the project is to provide access to state-of-the-art observations and analysis tools for the scientific community on solar energetic particle (SEP) events and related electromagnetic (EM) emissions. The project will eventually lead to better understanding of the particle acceleration and transport processes at the Sun and in the inner heliosphere. These processes lead to SEP events that form one of the key elements of space weather. In this paper we present the first results from the systematic analysis work performed on the following datasets: SOHO/ERNE, SOHO/EPHIN, ACE/EPAM, Wind/WAVES and GOES X-rays. A catalogue of SEP events at 1 AU, with complete coverage over solar cycle 23, based on high-energy (~68-MeV) protons from SOHO/ERNE and electron recordings of the events by SOHO/EPHIN and ACE/EPAM are presented. A total of 115 energetic particle events have been identified and analysed using velocity dispersion analysis (VDA) for protons and time-shifting analysis (TSA) for electrons and protons in order to infer the SEP release times at the Sun. EM observations during the times of the SEP event onset have been gathered and compared to the release time estimates of particles. Data from those events that occurred during the European day-time, i.e., those that also have observations from ground-based observatories included in SEPServer, are listed and a preliminary analysis of their associations is presented. We find that VDA results for protons can be a useful tool for the analysis of proton release times, but if the derived proton path length is out of a range of 1 AU < s[3 AU, the result of the analysis may be compromised, as indicated by the anti-correlation of the derived path length and release time delay from the asso ciated X-ray flare. The average path length derived from VDA is about 1.9 times the nominal length of the spiral magnetic field line. This implies that the path length of first-arriving MeV to deka-MeV protons is affected by interplanetary scattering. TSA of near-relativistic electrons results in a release time that shows significant scatter with respect to the EM emissions but with a trend of being delayed more with increasing distance between the flare and the nominal footpoint of the Earth-connected field line.

3D-suunnittelujärjestelmän ja tuotetiedonhallintajärjestelmän integrointi

3D-suunnittelujärjestelmät ovat tärkeitä työkaluja tuotetiedon luomista ja muokkaamista varten, joten niiden tehokas toiminta yhdessä tuotetiedonhallintajärjestelmien kanssa on erittäin tärkeää. 3D-suunnittelujärjestelmien kehityksen seurauksena 3D-malleihin voidaan sisällyttää entistä enemmän tuotetietoa, jolloin tehokas tiedon tallentaminen ja sen hallinta kasvattaa merkitystään. 3D-malleihin sisältyvää tietoa, kuten esimerkiksi kappaleen painoa tai geometriaa, halutaan myös tarkastella ilman tiettyä 3D-järjestelmää. Tuotetiedon hallinta on ollut jo pitkään tärkeä osa tuotteen suunnitteluprosessia. Tuotetiedon hallintaan sisältyy tiedon luomista, keräämistä ja muokkaamista koko tuotteen eliniän ajan. Näitä tietoja voivat olla esimerkiksi piirustukset, 3D-mallit, mittauspöytäkirjat, kokouspöytäkirjat, mallistoluettelot, lujuuslaskelmat, huoltoraportit jne. Tuotetiedonhallintajärjestelmä pitää huolta kaikesta tästä tiedosta ja sen kautta tuotteisiin liittyvää tietoa voidaan myös muokata ja jakaa tehokkaasti. Tässä diplomityössä tutkittiin näiden kahden järjestelmän integraation toteutusta erilaisilla menetelmillä. Työn tarkoituksena oli valita Valtra Oy:n tarkoituksiin parhaiten sopiva menetelmä tuotetiedon siirtämiseksi järjestelmien välillä tehokkaasti. Työn tuloksena annetaan suositus käytettävistä menetelmistä ja työkaluista.

Venäjälle suuntautuva tavaraliikenne ja sen ympäristöhaittojen minimointi

Tavaranvaihto Suomen itärajalla on aina ollut hyvin vilkasta. Neuvostoliiton romahtamisen jälkeen kauppaan tuli hetkellisesti erittäin syvä notkahdus, joka kääntyi voimakkaaksi nousuksi lähestyttäessä 1990-luvun puoliväliä. Pelkän vientikaupan oheen tuli välityskauppaa, sekä transitoliikennettä, jolla on ollut huomattavaa paikallista vaikutusta Kaakkois-Suomen työllisyyteen, sekä kuljetusalalle maanlaajuisestikin. Venäjän devalvaatio elokuussa 1998 romahdutti, sekä kaupan, että transitoliikenteen, mutta on sittemmin kääntynyt uuteen nousuun. Koko Venäjän tulevaisuus ja sitä kautta maamme itärajan liikennemäärät ovat varsin vaikeasti ennustettavissa, mutta todennäköisintä on Venäjän talouskasvun jatkuminen, jonka hyödyntämisessä ja tukemisessa myös Suomen tulisi olla. Liikennemäärien kasvu on aiheuttanut paikallisia ympäristöongelmia myös Suomen puolella rajaa. Ongelmat ovat kasaantuneet rajanylityspaikoille Nuijamaalle ja Vaalimaalle valtavien rekkajonojen myötä. Paikallisten asukkaiden elämän helpottamiseksi olisi valtiovallan pyrittävä kehittämään rajanylityspaikkoja, joista erityisesti Nuijamaa on käynyt jo kauan sitten liian pieneksi. Tekninen kehitys pienentää yksittäisen auton aiheuttamaa kuormitusta luonnolle, mutta liikennemäärien kasvu aiheuttaa kasaantuvia paikallisia ongelmia. Olemme toistaiseksi Suomessa EU:n itärajalla. Viron ja muiden Baltian maiden liittymiseen saakka, ja maantieteellisessä erityisasemassa koko unionin alueella. Samalla Suomen olisi muistettava, että meidän itärajalla on toistaiseksi maailman suurin elintasokuilu ja eurooppalainen vastakkain asettelu: EU vastaan Venäjä, länsi vastaan itä.

Sitoutumiskykyisemmän TMP-massan valmistus

Tämän työn tavoitteena oli selvittää TMP-massan lujuusominaisuuksien parantamismahdollisuuksia jauhatuksen keinoin. Tarkastelun kohteena olivat rejektijauhatuksen eriyttäminen päälinjasta, päälinjan ajotapojen vaikutukset massan laatuun sekä energiansäästöterien testaus. Erillisen rejektijauhatuksen pilot kokeiden myötä oli havaittavissa, että erillisjauhettu rejekti itsessään oli todella pitkäkuituista ja hyvät lujuusominaisuudet omaavaa massaa. Koeajo kuitenkin osoitti, että 9 % annostelu määrä päälinjan akseptimassaan ei riitä nostamaan valmiin massaseoksen lujuusominaisuuksia. Eriytetty rejektijauhatus voi kuitenkin parantaa prosessin hallittavuutta ja mahdollistaa tuotantotason noston. Päälinjan ajotavanmuutoskokeiden tulosten myötä voitiin havaita, että 300 t/d tuotantotaso tuotti kuidunpituuksiltaan, lujuuksiltaan ja tikkupitoisuuksiltaan parempaa massaa kuin 270 t/d tuotantotaso. Samaan aikaan tapahtunut bulkin lasku oli siedettävällä tasolla huomioitaessa vetolujuudessa tapahtuva parannus. Ajotavanmuutoskokeet osoittivat myös sen, että pienellä ensimmäisen ja toisen jauhatusvaiheen kuormitussuhteiden muutoksella on saavutettavissa parannusta sekä veto- että repäisylujuudessa, bulkissa tapahtuvien muutosten pysyessä siedettävällä tasolla. Tähän tulokseen päästiin löysäämällä ensimmäisen vaiheen jauhinten teräväliä kymmenyksellä ja vastaavasti tiukkaamalla toisen vaiheen jauhinten teräväliä niin, että jauhatuksen kokonaisenergianominaiskulutus pysyi vakiotasolla. Energiansäästöterien testauksessa havaittiin, että terien avulla on mahdollista säästää jauhatukseen kuluvassa energiassa noin 0,15 – 0,2 MWh/t. Saavutettavissa oleva energiansäästö ei kuitenkaan ole riittävä kompensoimaan massan laadun heikkenemistä, sillä energiansäästöterien myötä massan bulkki, kuidunpituus sekä veto- ja repäisylujuus laskivat verrattaessa niiden tasoon käytettäessä normaaliteriä.

Emergent geomorphic-vegetation interactions on a subalpine alluvial fan

Following perturbation, an ecosystem (flora, fauna, soil) should evolve as a function of time at a rate conditioned by external variables (relief, climate, geology). More recently, biogeomorphologists have focused upon the notion of co-development of geomorphic processes with ecosystems over very short through to very long (evolutionary) timescales. Alpine environments have been a particular focus of this co-development. However, work in this field has tended to adopt a simplified view of the relationship between perturbation and succession, including: how the landform and ecosystem itself conditions the impact of a perturbation to create a complex spatial response impact; and how perturbations are not simply ecosystem destroyers but can be a significant source of ecosystem resources. What this means is that at the within landform scale, there may well be a complex and dynamic topographic and sedimentological template that co-develops with soil, flora and fauna. Here, we present and test a conceptual model of this template for a subalpine alluvial fan. We combine detailed floristic inventory with soil inventory, determination of edaphic variables and analysis of historical aerial imagery. Spatial variation in the probability of perturbation of sites on the fan surface was associated with down fan variability in the across-fan distribution of fan ages, fan surface channel characteristics and fan surface sedimentology. Floristic survey confirmed that these edaphic factors distinguished site floristic richness and plant communities up until the point that the soil-vegetation system was sufficiently developed to sustain plant communities regardless of edaphic conditions. Thus, the primary explanatory variable was the estimated age of each site, which could be tied back into perturbation history and its spatial expression due to the geometry of the fan: distinct plant communities were emergent both across fan and down fan, a distribution maintained by the way in which the fan dissipates potentially perturbing events.

Double brooding and offspring desertion in the barn owl (Tyto alba)

Many bird species produce two annual broods during a single breeding season. However, not all individuals reproduce twice in the same year suggesting that double brooding is condition-dependent. In contrast to most raptors and owls, the barn owl Tyto alba produces two annual clutches in most worldwide distributed populations. Nevertheless, the determinants of double brooding are still poorly studied. We performed such a study in a Swiss barn owl population monitored between 1990 and 2014. The annual frequency of double brooding varied from 0 to 14% for males and 0 to 59% for females. The likelihood of double brooding was higher when individuals initiated their first clutch early rather than late in the season and when males had few rather than many offspring at the first nest. Despite the reproductive benefits of double brooding (single- and double-brooded individuals produced 3.97 +/- 0.11 and 7.07 +/- 0.24 fledglings, respectively), double brooding appears to be traded off against offspring quality because at the first nest double-brooded males produced poorer quality offspring than single-brooded males. This might explain why females desert their first mate to produce a second brood with another male without jeopardizing reproductive success at the first nest. Furthermore, the reproductive cycle being very long in the barn owl (120 d from start of laying to offspring independence), selection may have favoured behaviours that accelerate the initiation of a second annual brood. Accordingly, half of the double-brooded females abandoned their young offspring to look for a new partner in order to initiate the second breeding attempt, 9.48 d earlier than when producing the second brood with the same partner. We conclude that male and female barn owls adopt different reproductive strategies. Females have more opportunities to reproduce twice in a single season than males because mothers are not strictly required during the entire rearing period in contrast to fathers. A high proportion of male floaters may also encourage females to desert their first brood to re-nest with a new male who is free of parental care duties.

One-sided jet at milliarcsecond scales in LS I +61˚ 303

We present Very Long Baseline Interferometry (VLBI) observations of the high mass X-ray binary LS I +61˚303, carried out with the European VLBI Network (EVN). Over the 11 hour observing run, performed ~10 days after a radio outburst, the radio source showed a constant flux density, which allowed sensitive imaging of the emission distribution. The structure in the map shows a clear extension to the southeast. Comparing our data with previous VLBI observations we interpret the extension as a collimated radio jet as found in several other X-ray binaries. Assuming that the structure is the result of an expansion that started at the onset of the outburst, we derive an apparent expansion velocity of 0:003 c, which, in the context of Doppler boosting, corresponds to an intrinsic velocity of at least 0:4 c for an ejection close to the line of sight. From the apparent velocity in all available epochs we are able to establish variations in the ejection angle which imply a precessing accretion disk. Finally we point out that LS I +61˚303, like SS 433 and Cygnus X-1, shows evidence for an emission region almostorthogonal to the relativistic jet

Optimised Utilization of Bioenergy in Poland

The aim of the study was to ford out the availability of biomasses, which are available for energy production, in Poland. Biomasses which were examined were forest residues and surplus straw. Availability was examined by 16 Polish voivodeships, which are provinces in Poland. After fording out the amounts of biomasses for energy production was examined the need of biomass in the biggest CHP plants in Poland. It was expected that all the plants uses 15 % of biomass as the fuel. In the first parts of the report are explained the legislation which effects to biomass use in energy production in EU level and in Polish level. Also the combustion methods best for biomasses are explained by examples. After this, is studied the general situation of renewable energy use in Poland and the facts about the country. In the last parts it's explained the calculations and is shown the example cases. When it was found out the needs and supply of biomass it was examined by examples how it could be transported to the plants from the producers. Also was examined costs effected, if there were logistical terminals between the producer and the end user. The estimation was done by setting prices for the biomass, and fording out average costs for producing and transporting biomass. There are a lot of surplus biomasses in Poland which could be used for energy production, and this is a one way to reach the goals that EU has set of renewable energies. But because biomasses doesn't have such a good calorific value, it isn't worth able to transport it very long distances. In the research was set the prices for producer 9€/MWh and for end user 15€/MWh, the maximum transportation distance for forest residues was 52 km and for straw 56 km. These are example estimations and it has to be remembered that there are a lot of factors that makes inaccurate. The model is really sensitive and by changing one parameter the results change a lot.

Random walk radiosity with generalized absorption probabilities

The author studies random walk estimators for radiosity with generalized absorption probabilities. That is, a path will either die or survive on a patch according to an arbitrary probability. The estimators studied so far, the infinite path length estimator and finite path length one, can be considered as particular cases. Practical applications of the random walks with generalized probabilities are given. A necessary and sufficient condition for the existence of the variance is given, together with heuristics to be used in practical cases. The optimal probabilities are also found for the case when one is interested in the whole scene, and are equal to the reflectivities

Performance evaluation of MPEG-4 Video encoder on Adres

Actualment un típic embedded system (ex. telèfon mòbil) requereix alta qualitat per portar a terme tasques com codificar/descodificar a temps real; han de consumir poc energia per funcionar hores o dies utilitzant bateries lleugeres; han de ser el suficientment flexibles per integrar múltiples aplicacions i estàndards en un sol aparell; han de ser dissenyats i verificats en un període de temps curt tot i l’augment de la complexitat. Els dissenyadors lluiten contra aquestes adversitats, que demanen noves innovacions en arquitectures i metodologies de disseny. Coarse-grained reconfigurable architectures (CGRAs) estan emergent com a candidats potencials per superar totes aquestes dificultats. Diferents tipus d’arquitectures han estat presentades en els últims anys. L’alta granularitat redueix molt el retard, l’àrea, el consum i el temps de configuració comparant amb les FPGAs. D’altra banda, en comparació amb els tradicionals processadors coarse-grained programables, els alts recursos computacionals els permet d’assolir un alt nivell de paral•lelisme i eficiència. No obstant, els CGRAs existents no estant sent aplicats principalment per les grans dificultats en la programació per arquitectures complexes. ADRES és una nova CGRA dissenyada per I’Interuniversity Micro-Electronics Center (IMEC). Combina un processador very-long instruction word (VLIW) i un coarse-grained array per tenir dues opcions diferents en un mateix dispositiu físic. Entre els seus avantatges destaquen l’alta qualitat, poca redundància en les comunicacions i la facilitat de programació. Finalment ADRES és un patró enlloc d’una arquitectura concreta. Amb l’ajuda del compilador DRESC (Dynamically Reconfigurable Embedded System Compile), és possible trobar millors arquitectures o arquitectures específiques segons l’aplicació. Aquest treball presenta la implementació d’un codificador MPEG-4 per l’ADRES. Mostra l’evolució del codi per obtenir una bona implementació per una arquitectura donada. També es presenten les característiques principals d’ADRES i el seu compilador (DRESC). Els objectius són de reduir al màxim el nombre de cicles (temps) per implementar el codificador de MPEG-4 i veure les diferents dificultats de treballar en l’entorn ADRES. Els resultats mostren que els cícles es redueixen en un 67% comparant el codi inicial i final en el mode VLIW i un 84% comparant el codi inicial en VLIW i el final en mode CGA.

Líquido iônico [bmim.PF6] como solvente: um meio conveniente para estudos por fotólise por pulso de laser

The spectroscopic behavior of thioxanthone and benzil (diphenylethanedione or dibenzoyl) in the ionic liquid [bmim.PF6] has been investigated employing the laser flash photolysis technique. Triplet-triplet absorption spectra for these carbonyl compounds in [bmim.PF6] are similar to those observed in organic solvents. The triplet lifetime for thioxanthone in desogygenated samples is very long (71 μs), whereas in oxygen-saturated solution is 500 ns, which indicates the low oxygen solubility in this solvent. For benzil, lifetimes of 10 μs in [bmim.PF6] and 3.8 μs in acetonitrile were obtained. The decay for triplet thioxanthone and benzil follows a clear first order kinetics in [bmim.PF6], from which one can conclude that triplet-triplet annihilation is not an important decay process in this solvent.

Estratégias de pré-concentração em eletroforese capilar: parte 2. Manipulação da velocidade da fase dispersa/secundária

This work describes CE preconcentration strategies based on the effect of manipulation of the disperse/secondary velocity. Introduced by Terabe et al. in 1984, micellar electrokinetic chromatography is a powerful separation approach that increases the usage of electrokinetic phenomena for the separation of nonionic compounds. The main disadvantage of MEKC is the low concentration sensitivity associated with the limited optical path length for on-capillary photometric detection and the limited volume of sample solution that can be injected. This paper compiles on-line concentration strategies for neutral analytes by sample stacking and sweeping in micellar electrokinetic chromatography.

Luottamuksen ilmeneminen alueellisissa yhteistyöverkostoissa

Appearance of trust in regional, co-operative networks In our times, the value of social networks has been widely acknowledged. One can say that it is important for private persons to get networked, whilst it is even a must for companies and organizations in business life. This doctor's thesis examines three co-operative regional networks. Networks are located in Western Uusimaa (Länsi-Uusimaa) region in southernmost Finland, and they had both public organizations and private companies as participants (later called ‘players’). Initially, all of them were co-financed from public funds, and two of them are still operational while writing this. The main target of these networks has been to act as learning networks. The learning network stands for an ensemble of research and development units and workplaces constituting a common forum for learning. The main focus in this study has been on qualitative and structural characteristics of the networks, and how they are relating with intrinsic trust. In addition to the development of trust, it has been studied, at what level organizational learning within the networks takes place, and lastly, what kind of factors facilitate the development of social capital. The theoretical framework for the study is built on analysing trust and social capital. It is a 'mission impossible' to find single definitions for such major concepts. In this study, from the research questions' point of view it has been more relevant to concentrate on the aspects of networking and the relationships between the participating organizations. The total view in this study is very network-centric, and therefore those theories which have similar point of view have been prioritized. Such is the theory about structural holes by Ronald S. Burt (1992). It has been widely applied; especially his views on constraints affecting players in networks. The purpose of this study has not been to create new theories or to analyse and compare thoroughly the existing theoretical trends. Instead, the existing theories have provided the study with conceptual tools, which have been utilized for supporting the empirical results. The aim has been to create an explanatory case study consisting relevant discussion on the relationship between the network characteristics and the appearance of trust. The conceptual categorization for confidence vs. trust created by Niklas Luhmann (1979) is another important theoretical building block. In most cases, co-operation in networks is initiated by people already trusting in each other and willing to work together. However, personal trust is not sufficient in the long run to sustain the co-operation within the network: more abstract systemic trust described by Luhmann must also emerge. In the networks with different structures and at different development phases, these forms of trust appear at different levels. In this study, Luhmann’s systemic trust as a term has been replaced by the concept of 'trust in network as a system'. Structural characteristics of a network (density, centrality, structural holes etc.) have been selected to explain the creation of social capital and trust. The ability to adapt new information is essential for the development of social capital. Qualitative analysis for development phase has been used, and the Learning Network Maturity Test by Leenamaija Otala (2000) and her work have been applied. Thus, the qualitative characteristics and the structural characteristics of the networks are utilized together, when the creation of social capital and appearance of trust are assessed. Social Network Analysis, questionnaires and interviews have been the research methods. Quantitative and qualitative data have been combined. There is a similarity in viewpoints to research data with Extensive Case Study method, in which different cases are searched by exploring various cases and comparing certain common features between them and generic models. Development of trust, social capital and organizational learning has been explained in the study by comparing the networks in hand. Being a case study, it doesn't have targets to provide with general results and findings like conventional surveys. However, in this work phenomena and mechanisms related to them are interpreted from the empirical data. Key finding of this study is that the networks with high structural equality and clear target setting enable building trust to the network as a system. When systemic trust is present, e.g. changes in personnel involved in the co-operation won't hinder the network from remaining operational. On the other hand, if the players are not well motivated to co-operate, if the network is extremely centralized structurally, or if the network has players holding very much more beneficial position compared to the others, systemic trust won't develop: trust tends to remain at the personal level, and is directed to some players only. Such networks won't generate results and benefits to its players, and most probably they won’t live very long. In other words, learning networks cannot solely be based on willingness to learn, but also on willingness to co-operate.

Multifrequency VLBI Observations of Selected Active Galactic Nuclei

In this dissertation, active galactic nuclei (AGN) are discussed, as they are seen with the high-resolution radio-astronomical technique called Very Long Baseline Interferometry (VLBI). This observational technique provides very high angular resolution (_ 10−300 = 1 milliarcsecond). VLBI observations, performed at different radio frequencies (multi-frequency VLBI), allow to penetrate deep into the core of an AGN to reveal an otherwise obscured inner part of the jet and the vicinity of the AGN’s central engine. Multi-frequency VLBI data are used to scrutinize the structure and evolution of the jet, as well as the distribution of the polarized emission. These data can help to derive the properties of the plasma and the magnetic field, and to provide constraints to the jet composition and the parameters of emission mechanisms. Also VLBI data can be used for testing the possible physical processes in the jet by comparing observational results with results of numerical simulations. The work presented in this thesis contributes to different aspects of AGN physics studies, as well as to the methodology of VLBI data reduction. In particular, Paper I reports evidence of optical and radio emission of AGN coming from the same region in the inner jet. This result was obtained via simultaneous observations of linear polarization in the optical and in radio using VLBI technique of a sample of AGN. Papers II and III describe, in detail, the jet kinematics of the blazar 0716+714, based on multi-frequency data, and reveal a peculiar kinematic pattern: plasma in the inner jet appears to move substantially faster that that in the large-scale jet. This peculiarity is explained by the jet bending, in Paper III. Also, Paper III presents a test of the new imaging technique for VLBI data, the Generalized Maximum Entropy Method (GMEM), with the observed (not simulated) data and compares its results with the conventional imaging. Papers IV and V report the results of observations of the circularly polarized (CP) emission in AGN at small spatial scales. In particular, Paper IV presents values of the core CP for 41 AGN at 15, 22 and 43 GHz, obtained with the help of the standard Gain transfer (GT) method, which was previously developed by D. Homan and J.Wardle for the calibration of multi-source VLBI observations. This method was developed for long multi-source observations, when many AGN are observed in a single VLBI run. In contrast, in Paper V, an attempt is made to apply the GT method to single-source VLBI observations. In such observations, the object list would include only a few sources: a target source and two or three calibrators, and it lasts much shorter than the multi-source experiment. For the CP calibration of a single-source observation, it is necessary to have a source with zero or known CP as one of the calibrators. If the archival observations included such a source to the list of calibrators, the GT could also be used for the archival data, increasing a list of known AGN with the CP at small spatial scale. Paper V contains also calculation of contributions of different sourced of errors to the uncertainty of the final result, and presents the first results for the blazar 0716+714.