Propagação do pinhão manso por estaquia, enxertia e sementes

Pós-graduação em Agronomia - FEIS

Effects of the Temperature and Maturation Stages on the Germination of Roystonea regia Seeds

Roystonea regia (Kunth) O.F. Cook is largely used as ornamental. The propagation is done almost exclusively by seeds; however, there is a great variation in the germination process influenced by many factors. The objective of this work was to study the effects of the temperature and maturation stages on the germination of R. regia seeds. The experimental design was entirely randomized in a factorial arrangement 6x3 (six temperatures: constant at 20, 25, 30 and 35 degrees C and alternated at 20-30 and 25-35 degrees C, with a photoperiod of 12 hours; and three fruit maturation stages: brown, yellow and black), with four replications of 25 disseminules (seed with stucked endocarp) each. The disseminules had their mesocarp and exocarp were removed and shade dried. Their moisture content was determined, and then they were placed in plastic boxes (gerbox type) containing vermiculite. The disseminules, with the germinative intumescence, were daily noted until germination was steady. The germination rate and the germination speed index were calculated, and the data were submitted to the variance analysis. The means were compared by the Tukey test. It was concluded that the highest germination rate (99.7%) and germination speed were obtained by seeds from mature (black) fruits at the temperature of 35 degrees C.

Germination of Roystonea borinquena OF Cook (Arecaceae) Seeds

This work aimed to study the effect of the temperature on the seed germination and to describe the morphology and germination process of disseminules (seeds with stucked endocarp) of R. borinquena species. The fruits were harvested and had their pulp (exocarp and mesocarp) removed and the disseminules were shade dried. The experimental design was entirely randomized and six treatments were performed (temperature conditions: constant at 25, 30 and 35 degrees C; alternated at 25-35 and 20-30 degrees C; and room temperature) with four replications with 25 disseminules per plot, placed in plastic boxes (gerbox) containing vermiculite. The germination rate and germination speed index were calculated, and the data were submitted to the variance analysis, and the means compared by the Tukey test. For the morphological studies, the external and internal sides of the disseminules, the embryo and the representative germination stages were sketched. The samples were fixed in FAA (formalin - acetic acid - ethyl alcohol). It was concluded that the highest germination rate and faster germination were at the constant temperature of 35 degrees C and alternated of 25-35 degrees C. The seeds are albuminous, with a hard endosperm that takes almost the entire interior of the disseminules; the embryo is lateral, peripheral and poorly differentiated; the germination is adjacent.

Substrates and controlled-release fertilizations on the quality of eucalyptus cuttings

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of Fe uptake and translocation in transgenic and non-transgenic soybean plants using enriched stable Fe-57 as a tracer

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Utilização de biossurfactante e surfactante químico para dessorção de óleo presente em vermiculita hidrofobizada: estudo comparativo

A number of methods and products have been developed in order to eliminate or reduce the negative effects that hydrocarbons cause to the environment, including hydrophobic expanded vermiculite, used in oil residue filtering systems at gas stations. However, upon adsorbing organic compounds, the vermiculite is no longer used and is sent to landfills. The aim of the present study was to wash granular and powdered vermiculite containing oil lubricant in its pores with distilled water and solutions of 0.1% SDS surfactant and rhamnolipids, with the aim of removing the lubricant and the possibility of reusing the mineral. The greatest amount of lubricant removal was obtained through washing with 0.1% SDS and both granulometric forms. This may be associated to the industrial purification received by the surfactant. However, the biosurfactant is ecologically more viable due to its low toxicity and ease of degradability. In the readsorption tests, greatest adsorption was obtained with the granular vermiculite washed in SDS solution. In order to enable the reuse of the mineral, further tests are needed to enhance desorption/adsorption efficiency.

Avaliação da influência do substrato utilizado na qualidade e quantidade das parcelas de água escoada, percolada e armazenada em três estruturas experimentais de telhado verde extensino

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização biométrica e germinação de mabolo (Diospyros blancoi Willd)

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Aspectos biológicos, morfometria e técnica de criação de Abaris basistriata Chaudoir, 1873 e Selenophorus seriatoporus Putzeys, 1878 (Coleoptera: carabidae)

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Tratamentos pré-germinativos e substratos na emergência de sementes e qualidade de mudas de pinhão manso (Jatropha curcas L.)

The physic nut can be propagated asexually or sexually. Using cuttings have been earlier yield and more fidelity characteristics of the parent plant. However, there is less initial vegetative growth. The seeds from the plants have increased genetic variability, are more vigorous and begin production later. To get quality changes, the substrate is an important factor. With that the objective was to taste pre-germinated treatments and different substrate on seeds emergence and quality physic nut seedlings. The experimental design was completely randomized, in factorial scheme 6 x 3 (pre-germinated treatments x substrate), 18 treatments and 4 repetition, 8 seeds to each repetition. It was evaluated six pre-germination treatments: T1: witness (without treatments); T2: water immersion for 12 hours; T3: water immersion for 24 hours; T4: mechanical scarification; T5: mechanical scarification + water immersion for 12 hours; T6: mechanical scarification + water immersion for 24 hours, using as substrate: commercial, expanded vermiculite and sand washed. The mechanical scarification was realized opposite the micropyle using sandpaper n. 60. After the pre-germination treatments, the seeds were emergence in plastic cups (200mL) with substrates. We evaluated the characteristics: percentage, beginning and emergence speed index, mean length of plant, diameter of plant stem, SPAD index, fresh and dry shoot and root. The results showed that in seeds of Jatropha do not need pre-germinative treatments; and the use of commercial substrate showed seedling development.

Techniques to improve the maintenance of a laboratory colony of Nyssomyia neivai (Diptera: Psychodidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Lâminas de fertirrigação e substratos na produção e qualidade de gérbera de vaso

Fertigation management of gerbera crop has been many times performed inadequately, and it has been worsened when mixtures of substrates with different physical and chemical characteristics are used. Aiming at evaluating the production and quality of potted gerbera in two substrates and different levels of fertigation, the experiment was conducted in the greenhouse of the DRN/Soil Science, FCA/UNESP, Botucatu (SP). A 5 x 2 factorial randomized block design (5 levels of fertigation and 2 substrates) was adopted with 4 replications. Levels of fertigation corresponded to maintenance of 100% available water (AW) in the substrate; 100 to 80% of AW; 100 to 60% of AW; 100 to 40% of AW and 100 to 20% of AW. The substrates were as follows: 1- mixed coconut fiber (50% pellet coconut fiber and 50% coir fiber), 2- 40% red soil, 40% decomposed pine bark, 10% composition 1 (40% decomposed pine bark, 30% vermiculite and 30% carbonized rice husk) and 10% composition 2 (75% decomposed pine bark and 25% needles of pine). Plants at the marketing stage were evaluated according to the number of leaves; diameter of leaf surface; leaf area; fresh and dry phytomass of leaves, inflorescence and total plant; inflorescence number and diameter, stem diameter, plant height, leaf area rate and electrical conductivity of the substrate solution. Plants of better quality were obtained when they were maintained in levels of 100% available water and the mixed coconut fiber was used as substrate.

Growth of seedlings Schizolobium amazonicum (Huber ex Ducke) on substrate fertilized with nitrogen, phosphorus and potassium

The nutritional management of seedlings in the nursery is one of the most important practices that influence seedling quality. The aim of this work was to evaluate the effect of nitrogen, phosphorus and potassium on the development of Schizolobium amazonicum seedlings grown in 250 cm(3) containers with a commercial substrate in the North of Mato Grosso State, Brazil. The experimental design was completely randomized design with five treatments and five replications, each replication being represented by 24 seedlings. The treatments were: control (only commercial substrate); nitrogen fertilization (150 g m(-3) N using ammonium sulfate + 1.0 kg of ammonium sulfate dissolved in 100 L of water and applied in coverage); phosphorus fertilization (300 g P2O5 m(-3) using simple superphosphate); potassium fertilization (100 g m(-3) K2O using potassium chloride + 0.3 kg of potassium chloride dissolved in 100 L of water and applied in coverage) and; complete (a mixture of the three nutrients, 150, 300 and 100 g m(-3) N, P2O5 and K2O, respectively + 1.0 kg of ammonium sulfate + 0.3 kg of potassium chloride). The commercial substrate was composted milled pine bark plus vermiculite. Evaluations of the seedlings were performed at 90 days after sowing. The complete treatment (NPK) gave the highest values for biometric and best plant indices, which express the quality. When analyzing nutrients in isolation; potassium had the lowest effect. Based on these results it can be recommended to fertilize Schizolobium amazonicum seedlings in nurseries with 150, 300 and 100 g m(-3) of N, P2O5 and K2O, respectively, plus 1.0 kg of sulfate ammonium and 0.3 kg of potassium chloride applied in coverage.

Cement-base bearing pads mortar for connections in the precast concrete: study of surface roughness

Bearing pads are used in precast concrete connections to avoid concentrated stresses in the contact area between the precast elements. In the present research, the bearing pads are Portland cement mortar with styrene-butadiene latex (SB), lightweight aggregate (expanded vermiculite-term) and short fibers (polypropylene, glass and PVA), in order to obtain a material with low modulus of elasticity and high tenacity, compared with normal Portland cement mortar. The objective of this paper is to analyze the influence of surface roughness on the pads and test other types of polypropylene fibers. Tests were carried out to characterize the composite and test on bearing pads. Characterization tests show compressive strength of 41MPa and modulus of elasticity of 12.8GPa. The bearing pads tests present 30% reduction of stiffness in relation to a reference mortar. The bearing pads with roughness on both sides present a reduction up to 30% in stiffness and an increase in accumulated deformation of more than 120%, regarding bearing pads with both sides smooth.

Geochemistry of the oceanic crust from ocean drilling samples

This book presents new data on chemical and mineral compositions and on density of altered and fresh igneous rocks from key DSDP and ODP holes drilled on the following main tectonomagmatic structures of the ocean floor: 1. Mid-ocean ridges and abyssal plains and basins (DSDP Legs 37, 61, 63, 64, 65, 69, 70, 83, and 91 and ODP Legs 106, 111, 123, 129, 137, 139, 140, 148, and 169); 2. Seamounts and guyots (DSDP Legs 19, 55, and 62 and ODP Legs 143 and 144); 3. Intraplate rises (DSDP Legs 26, 33, 51, 52, 53, 72, and 74 and ODP Legs 104, 115, 120, 121, and 183); and 4. Marginal seas (DSDP Legs 19, 59, and 60 and ODP Legs 124, 125, 126, 127, 128, and 135). Study results of altered gabbro from the Southwest Indian Ridge (ODP Leg 118) and serpentinized ultramafic rocks from the Galicia margin (ODP Leg 103) are also presented. Samples were collected by the authors from the DSDP/ODP repositories, as well as during some Glomar Challenger and JOIDES Resolution legs. The book also includes descriptions of thin sections, geochemical diagrams, data on secondary mineral assemblages, and recalculated results of chemical analyses with corrections for rock density. Atomic content of each element can be quantified in grams per standard volume (g/1000 cm**3). The suite of results can be used to estimate mass balance, but parts of the data need additional work, which depends on locating fresh analogs of altered rocks studied here. Results of quantitative estimation of element mobility in recovered sections of the upper oceanic crust as a whole are shown for certain cases: Hole 504B (Costa Rica Rift) and Holes 856H, 857C, and 857D (Middle Valley, Juan de Fuca Ridge).