MCR-ALS APLICADO NO MONITORAMENTO QUANTITATIVO DO PROCESSO DE ELETRODEGRADAÇÃO DA ATRAZINA USANDO ESPECTROS UV: RESULTADOS COMPARATIVOS COM HPLC-DAD COMO UM MÉTODO DE REFERÊNCIA

Electrodegradation of atrazine in water was performed using homemade (PA and PB) and purchased (PC) boron-doped diamond anodes. The degradation was monitored off-line by analyzing total organic carbon and high performance liquid chromatography with diode array detector (HPLC-DAD) and at-line by UV spectroscopy. The spectra were recorded every 2 min. The rank deficiency problem was resolved by assembling an augmented column-wise matrix. HPLC was employed to separate the original and byproducts degradation components. Aiming the same goal, multivariate curve resolution - alternating least squares (MCR-ALS) was applied to resolve the UV spectroscopic data. Comparison between HPLC and MCR-ALS separations is presented. By using MCR-ALS the spectra of atrazine and two byproducts were successfully resolved and the resulted concentration profiles properly represented the system studied. The ALS explained variance (R2) for PA, PB and PC was equal to 99.99% for all of them and the lack of fit for PA, PB and PC were 0.39, 0.34 and 0.54 respectively. The correlation (R) between the recovered and pure spectra were calculate for each electrodegradation, validating the MCR-ALS results. The average R was equal to 0.997. The spectral and concentration profiles described with this new approach are in agreement with HPLC-DAD results. The proposed method is an alternative to classical analyses for monitoring of the degradation process, mainly due to the simplicity, fast results and economy.

Efeito da irradiação UV-C no controle da podridão parda (Monilinia fructicola) e da podridão mole (Rhizopus stolonifer) em pós-colheita de pêssegos

Este trabalho teve por objetivo avaliar o efeito da irradiação UV-C no controle in vitro de Monilinia fructicola e Rhizopus stolonifer e no controle das doenças causadas por estes fungos em pêssegos inoculados com ferimento. No experimento in vitro, avaliou-se o crescimento micelial dos fungos em meio BDA após a exposição nas doses de UV-C de 0, 0,26, 0,52, 1,04, 3,13, 5,22, 10,44, 15,66, e 31,32 kJ.m-2 num equipamento com quatro lâmpadas com taxa de fluência de 1,74 mW.cm-2. Nos experimentos in vivo, os frutos foram tratados com irradiação UV-C de forma protetora e curativa. No tratamento protetor, os frutos foram expostos a 1,04 kJ.m-2 por 1 min. e foram inoculados imediatamente após e 16, 24 e 40 h após. No tratamento curativo, os frutos foram inoculados, incubados e irradiados com doses de UV-C de 0, 1,04, 5,22, 10,44, 15,66 e 31,32 kJ.m². Avaliou-se a incidência das doenças e a severidade da podridão parda. No experimento in vitro, apenas as doses aplicadas durante 1 e 10 min. de exposição reduziram o crescimento micelial de M. fructicola enquanto que a aplicação da luz UV-C entre 10-15 minutos reduziu o crescimento micelial de R. stolonifer e a dose aplicada durante 30 minutos inibiu completamente o crescimento micelial deste fungo. Não houve efeito protetor da luz UV-C no controle das doenças. Não houve controle curativo da podridão parda. A irradiação UV-C foi eficiente no controle curativo da podridão mole e o tempo de exposição de 10 min. foi o que apresentou melhor resultado.

Análise do teor de cocaína em amostras apreendidas pela polícia utilizando-se a técnica de cromatografia liquida de alta eficiência com detector UV-Vis

A técnica de CLAE com detecção UV-Vis foi empregada na análise do teor de cocaína em amostras apreendidas de cocaína e crack. Uma fase móvel de acetonitrila/água (95:5v/v) possibilitou um sinal de pico para a cocaína em 3,5 minutos. O sinal espectrofotométrico otimizado foi obtido em um comprimento de onda de 224 nm. A curva analítica de 1,0 a 40,0 ppm para cocaína foi obtida, exibindo um coeficiente de correlação linear de 0,9989, com limites de detecção e quantificação de 0,75 e 3,78 ppm, respectivamente. Esta metodologia foi aplicada na dosagem de amostras confiscadas de cocaína e crack no Laboratório de Polícia Científica de Ribeirão Preto-SP.

Determination of sugars and organic acids in pulp samples by capillary electrophoresis with UV detection

This MSc work was done in the project of BIOMECON financed by Tekes. The prime target of the research was, to develop methods for separation and determination of carbohydrates (sugars), sugar acids and alcohols, and some other organic acids in hydrolyzed pulp samples by capillary electrophoresis (CE) using UV detection. Aspen, spruce, and birch pulps are commonly used for production of papers in Finland. Feedstock components in pulp predominantly consist of carbohydrates, organic acids, lignin, extractives, and proteins. Here in this study, pulps have been hydrolyzed in analytical chemistry laboratories of UPM Company and Lappeenranta University in order to convert them into sugars, acids, alcohols, and organic acids. Foremost objective of this study was to quantify and identify the main and by-products in the pulp samples. For the method development and optimization, increased precision in capillary electrophoresis was accomplished by calculating calibration data of 16 analytes such as D-(-)-fructose, D(+)-xylose, D(+)-mannose, D(+)-cellobiose, D-(+)-glucose, D-(+)-raffinose, D(-)-mannitol, sorbitol, rhamnose, sucrose, xylitol, galactose, maltose, arabinose, ribose, and, α-lactose monohydratesugars and 16 organic acids such as D-glucuronic, oxalic, acetic, propionic, formic, glycolic, malonic, maleic, citric, L-glutamic, tartaric, succinic, adipic, ascorbic, galacturonic, and glyoxylic acid. In carbohydrate and polyalcohol analyses, the experiments with CE coupled to direct UV detection and positive separation polarity was performed in 36 mM disodium hydrogen phosphate electrolyte solution. For acid analyses, CE coupled indirect UV detection, using negative polarity, and electrolyte solution made of 2,3 pyridinedicarboxylic acid, Ca2+ salt, Mg2+ salts, and myristyltrimethylammonium hydroxide in water was used. Under optimized conditions, limits of detection, relative standard deviations and correlation coefficients of each compound were measured. The optimized conditions were used for the identification and quantification of carbohydrates and acids produced by hydrolyses of pulp. The concentrations of the analytes varied between 1 mg – 0.138 g in liter hydrolysate.

Hidrotermia e radiação UV-C no controle de patógenos de manga e melão

As doenças de pós-colheita são, em geral, de difícil controle e são responsáveis por perdas significativas de manga (Mangifera indica L.) e melão (Cucumis melo L.) no Brasil. Os principais patógenos pós-colheita do melão são Alternaria alternata, Fusarium pallidoroseum e Myrothecium roridum, enquanto que na manga são Colletotrichum gloeosporioides e Lasiodiplodia theobromae. O objetivo deste trabalho foi avaliar a sensibilidade dos propágulos destes patógenos aos tratamentos de hidrotermia e de radiação UV-C. Suspensões de conídios e discos de micélio de cada patógeno foram submetidos aos tratamentos de hidrotermia a 50, 55 e 58 ºC por 15 e 30 s e de radiação UV-C nas doses de 0,330 kJ m-2, 0,660 kJ m-2 e 1,320 kJ m-2. Após os tratamentos e incubação por 72 e 48 h, foram avaliados o número de unidades formadoras de colônias (UFCs) e o crescimento micelial dos patógenos, respectivamente. Os tratamentos apresentaram eficiência distinta entre os propágulos e os patógenos. O controle de UFCs e do crescimento micelial de C. gloeosporioides e L. theobromae foi superior a 88 % com água aquecida a 55 ºC ou 58 ºC, independente do tempo de tratamento. Para os mesmos patógenos, a maior dose de radiação, 1,320 kJ m-2, controlou acima de 96 % das UFCs. Entretanto, o controle do crescimento micelial destes patógenos com radiação UV-C foi inferior quando comparado ao uso de água aquecida a 55 ºC ou 58 ºC. O controle de UFCs de A. alternata, M. roridum e F. pallidoroseum foi superior com os tratamentos de água aquecida a 55 ºC por 30 s, 58 ºC por 15 s e 30 s e com as doses de radiação de 0,660 kJ m-2 e 1,320 kJ m-2. O controle do crescimento micelial de A. alternata e de M. roridum foi inferior com as doses de radiação e com a temperatura de 50 ºC quando comparados aos demais tratamentos. Na redução do crescimento micelial de F. pallidoroseum, os tratamentos a 58 ºC ou as doses de 0,660 kJ m-2 e 1,320 kJ m-2 foram mais eficiêntes, com controle superior a 88 %. Água aquecida a 58 ºC por 15 s controlou UFCs e o crescimento micelial dos patógenos testados.

Uv. Lilla slafvinnan ("Ali Baba") : alkusoitto

Soitinnus: orkesteri.

Packaging inks for folding cartons used in food packaging

This thesis examined packaging inks suitable for folding cartons used in food packaging. The recent cases of compounds migrating from packaging inks into packed food, have forced the packaging ink manufacturers to develop inks that do not include substances at a level, that may pose a risk to the health of a consumer or to the quality of packed food. Food packaging is a sensitive area and subject to extensive legislation. This research presents the current situation on regulatory documents that can be used to demonstrate the safety of packaging inks used in food packaging. In the research, data was also collected on the available packaging inks for food packaging in packaging ink market. Test printing was performed with five printing inks and three varnishes on Ensocoat board, produced by Stora Enso. Tests results regarding print quality, runnability, sensory properties and migration were analysed. The packaging inks with the finest performance in the tests were ultra violet curing printing ink and varnish. The results showed that ultra violet curing printing technology in food contact applications is an important research area, with further research possibly being able to redeem the UV technologies' bad reputation within the packaging supply chain.

Rasvasuodatus UV-valon avulla

Tämä kandidaatintyö käsittelee rasva-aerosolien vähentämistä liesituulettimissa ultraviolettivalon (UV) ja titaanioksidin avulla (TiO2). Työssä käsitellään rasva-aerosolien aiheuttamia haittoja julkisissa keittiöissä ja liesituulettimen merkitystä rasva-aerosolipitoisuuksiin. Työn tavoitteena on selvittää, miten rasva-aerosolit käyttäytyvät kun niitä suodatetaan UV-valon ja TiO2-katalyytin avulla. Työssä myös pohditaan onko UV/TiO2-menetelmä tehokas liesituulettimen rasvan vähentäjä.

UV-LED -lamppujen soveltuminen laivojen painolastivesien käsittelyyn

Painolastivesien mukana kulkeutuvien lajien leviäminen on yksi vakavimmista globaaleista ympäristöuhkista. Kansainvälinen merenkulkujärjestö IMO määritteli vuonna 2004 kansainvälisen painolastivesiyleissopimuksen, jonka tarkoituksena on ehkäistä laivojen painolastivesien mukana kulkeutuvien lajien leviämistä. Sopimus velvoittaa aluksia käsittelemään niiden painolastivedet ja se sisältää myös käsittelyjärjestelmiltä edellytetyt vaatimukset. Vaikka sopimus ei ole vielä astunut voimaan, painolastivesien käsittelyyn löytyy markkinoilta jo useita kymmeniä IMO:n hyväksymiä käsittelyjärjestelmiä, jotka hyödyntävät erilaisia mekaanisia, fysikaalisia ja kemiallisia menetelmiä. Yksi yleisimmin käytetyistä menetelmistä on UV-säteilytys. UV-säteily tuotetaan elohopealampuilla, jotka kuitenkin kuluttavat paljon energiaa ja sisältävät myrkyllistä elohopeaa. Tämän työn tarkoituksena oli selvittää, voisiko elohopealamput korvata lähitulevaisuudessa UV-LED -lampuilla. UV-LED –lamppujen etuja ovat muun muassa energiatehokkuus, kestävä rakenne ja myrkyttömyys. Työn tärkeimpänä tavoitteena oli tutkia laboratoriomittausten avulla, millainen UV-annosmäärä 10-50 µm kokoisten kasviplanktonien inaktivoimiseen tarvitaan. Mittausjärjestelyt vastasivat suurelta osin IMO:n vaatimuksia. Laboratoriomittauksissa käytettiin 265 nm:n aallonpituudella toimivia UV-LED -lamppuja. Näytteiden analysoinnissa käytettiin sekä PAM-fluorometriä että virtaussytometriä. Saatujen tulosten perusteella tutkimuksessa käytettyjen lajien Asterionellopsis glacialis ja Thalassiosira sp. täydelliseen inaktivoitumiseen tarvittiin noin 600 mJ/cm2 suuruinen UV-annos. Tulos vastasi ennakko-odotuksia ja se oli vertailukelpoinen muiden aiheesta tehtyjen tutkimusten kanssa. Koska nykyisten UV-LED –lamppujen teho on hyvin alhainen, ne eivät vielä sovellu painolastivesien käsittelyyn. UV-LED –lamppujen kehitystyö on kuitenkin käynnissä ja on arvioitu, että niitä voitaisiin käyttää suurten virtaamien käsittelyssä 5-10 vuoden kuluttua.

Veden desinfiointi UV-LED-valolla

Veden riittämätön puhdistus aiheuttaa riskin veden käyttäjille. Miljoonia kuolemia vuosittain aiheuttavien vesiteitse leviävien sairauksien ehkäisemiseksi vaaditaan tehokkaita juomaveden desinfiointimenetelmiä. Kuivuuden ja väestönkasvun myötä veden tarve on lisääntynyt ja vedenkulutus tulee yhä kasvamaan. Tästä syystä mahdollisuus kierrättää vettä hyödyntäen sitä esimerkiksi kasteluun on saanut yhä enemmän huomiota. Kierrätettävä vesi on kuitenkin käsiteltävä huolellisesti sen sisältämän mikrobiologisen kontaminaatioriskin vuoksi. Ultraviolettisäteily luokitellaan fysikaaliseksi desinfiointimenetelmäksi. Sen tehokkuus perustuu mikro-organismien absorboimaan UV-säteilyyn, jonka aiheuttamien DNA:ssa tai RNA:ssa tapahtuvien muutoksien seurauksena mikro-organismi inaktivoituu ja estyy lisääntymästä. UV-desinfioinnissa on tyypillisesti käytetty elohopeahöyrylamppuja. Vaihtoehtoinen UV-säteilyn lähde ovat LEDit eli valoa emittoivat diodit. Matalapaine-elohopeahöyrylamppujen emittoima säteily on aallonpituudella 254 nm ja keskipaine-elohopeahöyrylamppujen emittoima säteily on laajakaistaista säteilyä. Energiatehokkuuden lisäksi LEDien etuna on, että niillä voidaan tuottaa kapeakaista säteilyä aallonpituudella, joka parhaiten absorboituu DNA:han. Tämän diplomityön tarkoituksena oli tutkia, onko UVC-alueen aallonpituuksien yhdistelmillä synergistisiä etuja LEDien desinfiointitehokkuuteen, kun desinfioidaan virtaavaa vettä useilla säteilyannoksilla ja indikaattorimikrobina käytetään kolibakteeria. Tavoitteena oli myös tutkia tällä hetkellä saatavissa olevien LEDien desinfiointitehokkuutta energiatehokkuuden näkökulmasta. Yksittäisistä aallonpituuksista desinfiointitehokkuudeltaan parhaimmaksi osoittautui 260 nm, aallonpituuksien yhdistelmistä tehokkain oli 265 nm:n ja 260 nm:n yhdistelmä. Muilla aallonpituuksien yhdistelmillä ei saavutettu odotettua parempaa desinfiointitehokkuutta. Optiselta teholtaan parhaimmat LEDit, 265 nm, 270 nm ja 275 nm olivat kokeiden perusteella myös energiatehokkuuden kannalta tarkasteltuina parhaimmat sekä yksittäin että yhdistelminä. UVC-aallonpituuksia emittoivien LEDien optisen tehokkuuden paraneminen on edellytys LEDien hyödyntämiselle desinfioinnissa.

The Combined treatment of UV Light and Titanium Dioxide (TiO2) in Grease Filtration Technique

The aim of this thesis was to identify the best grease removal technique with the application of low power of UV light to TiO2 coated grease filters. The treatment with various power series of ozone generating and ozone free lamps to normal grease filters and TiO2 coated grease filters were examined and the obtained results are compared to each other in this paper. The effect of ozone reaction was observed and compared with the effect of TiO2. The experiments were solely based on the photo oxidation and photo catalytic oxidation reactions. TiO2 is a green catalyst used in the photocatalytic reaction. Sunflower oil was used for grease production and tetracholoroethylene as a solvent. Grease samples were collected from the ventilation duct connected to the cooking hood system. Sample extraction was done in ultrasonic bath with the principle of sonication. The sample analysis was done by FTIR machine. The result determining the concentration of grease was the quantification of saturated C-H bonds in the chosen peak group of the spectrum. A very low power of UVC light functions perfectly with the Titanium dioxide. The experimental results have shown the combined treatment of titanium dioxide and UV light is an effective method in grease removal process. The photocatalytic reaction with titanium dioxide is better than photo oxidation reaction with ozone treatment. Photocatalytic reaction is environmentally friendly, energy efficient and economical.

Regulation of the expression of NADP-malic enzyme by UV-B, red and far-red light in maize seedlings

The induction of nicotinamide adenine dinucleotide phosphate-malic enzyme (NADP-ME) in etiolated maize (Zea mays) seedlings by UV-B and UV-A radiation, and different levels of photosynthetically active radiation (PAR, 400-700 nm) was investigated by measuring changes in activity, protein quantity and RNA levels as a function of intensity and duration of exposure to the different radiations. Under low levels of PAR, exposure to UV-B radiation but not UV-A radiation for 6 to 24 h caused a marked increase in the enzyme levels similar to that observed under high PAR in the absence of UV-B. UV-B treatment of green leaves following a 12-h dark period also caused an increase in NADP-ME expression. Exposure to UV-B radiation for only 5 min resulted in a rapid increase of the enzyme, followed by a more gradual rise with longer exposure up to 6 h. Low levels of red light for 5 min or 6 h were also effective in inducing NADP-ME activity equivalent to that obtained with UV-B radiation. A 5-min exposure to far-red light following UV-B or red light treatment reversed the induction of NADP-ME, and this effect could be eliminated by further treatment with UV-B or red light. These results indicate that physiological levels of UV-B radiation can have a positive effect on the induction of this photosynthetic enzyme. The reducing power and pyruvate generated by the activity of NADP-ME may be used for respiration, in cellular repair processes and as substrates for fatty acid synthesis required for membrane repair.

An HPLC-UV method for the measurement of permeability of marker drugs in the Caco-2 cell assay

The Caco-2 cell line has been used as a model to predict the in vitro permeability of the human intestinal barrier. The predictive potential of the assay relies on an appropriate in-house validation of the method. The objective of the present study was to develop a single HPLC-UV method for the identification and quantitation of marker drugs and to determine the suitability of the Caco-2 cell permeability assay. A simple chromatographic method was developed for the simultaneous determination of both passively (propranolol, carbamazepine, acyclovir, and hydrochlorothiazide) and actively transported drugs (vinblastine and verapamil). Separation was achieved on a C18 column with step-gradient elution (acetonitrile and aqueous solution of ammonium acetate, pH 3.0) at a flow rate of 1.0 mL/min and UV detection at 275 nm during the total run time of 35 min. The method was validated and found to be specific, linear, precise, and accurate. This chromatographic system can be readily used on a routine basis and its utilization can be extended to other permeability models. The results obtained in the Caco-2 bi-directional transport experiments confirmed the validity of the assay, given that high and low permeability profiles were identified, and P-glycoprotein functionality was established.

STABILITY OF OILS HEATED BY MICROWAVE: UV - SPECTROPHOTOMETRIC EVALUATION

The effects of microwave heating on the oxidative stability of refined canola, corn and soybean oils were determined by absorptivity in the UV spectrum and by chemical analysis (peroxide and acid values). Samples were heated in a microwave oven (800 W, 2,450 MHz) for 0 to 36 min. Microwave heating produced oxidative degradation in the three oils. Absorptivity at 232 and 270 nm increased gradually with an increase in microwave exposure time (0-36 min) for canola, corn and soybean oils. Values of absorptivity at 232 nm increased from 4.812, 3.568 and 4.183 to 10.579, 12.874 and 15.950 after 36 min of heating canola, corn and soybean oil, respectively. The absorptivity at 232nm, due to the formation of conjugated dienes, was a good index for measuring the degradation of microwaved samples. UV scanning (220 - 320 nm) detected alterations in the spectrum of microwaved samples. Acid value also increased within 36 min of heating for all oils. Peroxide value showed a significant difference (P<0.05) in the initial stage of heating (0-6 min) for all oils. After this period it could not be correlated with absorptivity at 232 nm, due to the instability of hydroperoxides at high temperatures.