Two-phase flow regimes in microchannels

Capillary hydrodynamics has three considerable distinctions from macrosystems: first, there is an increase in the ratio of the surface area of the phases to the volume that they occupy; second, a flow is characterized by small Reynolds numbers at which viscous forces predominate over inertial forces; and third, the microroughness and wettability of the wall of the channel exert a considerable influence on the flow pattern. In view of these differences, the correlations used for tubes with a larger diameter cannot be used to calculate the boundaries of the transitions between different flow regimes in microchannels. In the present review, an analysis of published data on a gas-liquid two-phase flow in capillaries of various shapes is given, which makes it possible to systematize the collected body of information. The specific features of the geometry of a mixer and an inlet section, the hydraulic diameter of a capillary, and the surface tension of a liquid exert the strongest influence on the position of the boundaries of two-phase flow regimes. Under conditions of the constant geometry of the mixer, the best agreement in the position of the boundaries of the transitions between different hydrodynamic regimes in capillaries is observed during the construction of maps of the regimes with the use of the Weber numbers for a gas and a liquid as coordinate axes.

Cold-formed steel sections with web openings subjected to web crippling under two-flange loading conditions - Part II: Parametric study and proposed design equations

A parametric study of cold-formed steel sections with web openings subjected to web crippling was undertaken using finite element analysis, to investigate the effects of web holes and cross-section sizes on the web crippling strengths of channel sections subjected to web crippling under both interior-two-flange (ITF) and end-two-flange (ETF) loading conditions. In both loading conditions, the hole was centred beneath the bearing plate. It was demonstrated that the main factors influencing the web crippling strength are the ratio of the hole depth to the flat depth of the web, and the ratio of the length of bearing plates to the flat depth of the web. In this paper, design recommendations in the form of web crippling strength reduction factors are proposed, that are conservative to both the experimental and finite element results.

Slievabawnogue Housing:Two Dwellings in A Disused Quarry

This project involves the construction of a dwelling in the outskirts of Dublin City. Situated in a disused quarry, the house act as an inhabited bridge, spanning between natural and man made outcrops, service structures and a shared entrance staircase. The houses language derives from the structure necessary to achieve these spans.
The section internally is modeled to present a variety of scales of spaces. More intimate living spaces and bedrooms occur in a lower, north-facing wing. Taller living spaces address the south.

Incorporating rainwater harvesting, wood-gasifying boilers, on site wind powered electrical generation, solar thermal panels and very high levels of insulation the houses are close to energy neutral. The fact that the house is constructed in massive timber construction means that 250 tonnes of carbon are sequestered in its construction. The design includes a 25yar replanting strategy to replace the existing coniferous-forested surrounds with native species in a coppiced planting strategy to allow ongoing fuel for the house, and cash crops to be sold on.

Located in an area of outstanding natural beauty the planning and design of the house involved research into patterns of rural development, the relationship between man made interventions and the natural landscape and the technology of the vernacular. This latter research forms part of the themes being explored under the Kevin Kieran Arts Council / OPW Bursary

Aims / Objectives Questions

1 To design and construct a low energy place to dwell.
2 To investigate the relationship between man-made interventions and new construction in an area of outstanding natural beauty.
3 To derive a language of construction that is contemporary in nature but refers to precedents embedded in the vernacular.
4 To develop a low-carbon form of construction that allows the construction of the house to act to sequester carbon
5 To make a contemporary addition in sympathy with the qualities of the existing site

Effect of offset web holes on web crippling strength of cold-formed steel channel sections under end-two-flange loading condition

A combination of experiments and non-linear finite element analyses are used to investigate the effect of offset web holes on the web crippling strength of cold-formed steel channel sections under the end-two-flange (ETF) loading condition; the cases of both flanges fastened and unfastened to the support are considered. The web holes are located at the mid-depth of the sections, with a horizontal clear distance of the web holes to the near edge of the bearing plate. Finite element analysis results are compared against the laboratory test results; good agreement was obtained in terms of both strength and failure modes. A parametric study was then undertaken to investigate both the effect of the position of holes in the web and the cross-section sizes on the web crippling strength of the channel sections. It was demonstrated that the main factors influencing the web crippling strength are the ratio of the hole depth to the depth of the web, and the ratio of the distance from the edge of the bearing to the flat depth of the web. Design recommendations in the form of web crippling strength reduction factors are proposed in this study.

Hollywood and world cinema influences: tracing intertextuality in the works of two contemporary filmmakers from Francophone Africa; Mahamat Saleh Haroun and Abderrahmane Sissako

Don’t tell me the moon is shining; show me the glint of light on broken glass Anton Chekhov Representations of Africa in cinema are almost as old as cinema itself and date back to Hollywood’s silent era. Most early examples feature the continent as a mere exotic backdrop and include The Sheik (Melford 1921), soon followed, in 1926, by George Fitzmaurice’s Son of the Sheik starring Rudolph Valentino. The next decade brought Van Dyke’s Tarzan movies, Robert Stevenson’s King Solomon’s Mines (1937), and, on the European side, Duvivier’s Pépé le Moko (1936). For representations of Francophone Africa by Africans themselves, the viewing public more or less had to wait, however, until decolonisation in the 1960s (with, for example, Sembene Ousmane’s Borom Sarret and La Noire de…, both released in 1966 and, in 1968, Mandabi). Since then Francophone African cinema has come a long way and has diversified into various strands. Between Borom Sarret and Mahamat-Saleh Haroun’s 2006 Daratt, Saison sèche - or the same director’s Un homme qui crie, almost half a century has elapsed. Over this period, films inevitably have addressed a spectrum of visual, ideological and political tropes. They range from unadorned depictions of the newly independent states and their societies to highly aestheticised productions, not to mention surreal and poetic visions as displayed for instance in Djibril Diop Mambéty’s Touki Bouki (1973). Most of the early films send an overt socio-political message which is a clear and explicit denunciation of a corrupt state of affairs (Souleymane Cissé’s Baara, 1977). They aim to trigger strong emotional and political responses from the viewer, in unambiguous support for the film-maker’s stand. Sembene himself declared: “I consider cinema a means of political action” (Murphy 2000: 221). Similarly, the Mauritanian director Med Hondo wishes to “take up this technical medium and to make it a mouthpiece on behalf of [his] fellow Africans and Arabs” (Jeffries 2002: 11). All this echoes the claims of the Fédération Panafricaine des Cinéastes (FEPACI, founded in 1969), an organisation “dedicated to the liberation of Africa”. In sharp contrast to the incipient momentum given Francophonie by Bourguiba, the Nigerien Hamani Diori and the Senegalese Senghor, who invoked a worldwide communauté organique francophone, FEPACI called for “the creation of an aesthetics of disalienation… [using] didactic... forms to denounce the alienation of countries that were politically independent but culturally and economically dependent on the West” (Diawara 1996: 40). Sembene’s Xala (1974) became the blueprint for this, to this day the best-known vein of Francophone African cinema. Thus considered, this pedigree seems a million miles from mainstream global cinema with its overriding mission to entertain. A question therefore arises: to what extent can a cinema that sprang from such beginnings be seen to interface in any meaningful way with a global film industry that, overwhelmingly and for a century, has indeed entertained the world – with Hollywood at its centre?

Mind in Dispute: The Section on Mind in Harivarman’s *Tattvasiddhi

Thesis (Ph.D.)--University of Washington, 2015

Confocal and two-photon microscopy : image enhancement /

Confocal and two-photon microcopy have become essential tools in biological research and today many investigations are not possible without their help. The valuable advantage that these two techniques offer is the ability of optical sectioning. Optical sectioning makes it possible to obtain 3D visuahzation of the structiu-es, and hence, valuable information of the structural relationships, the geometrical, and the morphological aspects of the specimen. The achievable lateral and axial resolutions by confocal and two-photon microscopy, similar to other optical imaging systems, are both defined by the diffraction theorem. Any aberration and imperfection present during the imaging results in broadening of the calculated theoretical resolution, blurring, geometrical distortions in the acquired images that interfere with the analysis of the structures, and lower the collected fluorescence from the specimen. The aberrations may have different causes and they can be classified by their sources such as specimen-induced aberrations, optics-induced aberrations, illumination aberrations, and misalignment aberrations. This thesis presents an investigation and study of image enhancement. The goal of this thesis was approached in two different directions. Initially, we investigated the sources of the imperfections. We propose methods to eliminate or minimize aberrations introduced during the image acquisition by optimizing the acquisition conditions. The impact on the resolution as a result of using a coverslip the thickness of which is mismatched with the one that the objective lens is designed for was shown and a novel technique was introduced in order to define the proper value on the correction collar of the lens. The amoimt of spherical aberration with regard to t he numerical aperture of the objective lens was investigated and it was shown that, based on the purpose of our imaging tasks, different numerical apertures must be used. The deformed beam cross section of the single-photon excitation source was corrected and the enhancement of the resolution and image quaUty was shown. Furthermore, the dependency of the scattered light on the excitation wavelength was shown empirically. In the second part, we continued the study of the image enhancement process by deconvolution techniques. Although deconvolution algorithms are used widely to improve the quality of the images, how well a deconvolution algorithm responds highly depends on the point spread function (PSF) of the imaging system applied to the algorithm and the level of its accuracy. We investigated approaches that can be done in order to obtain more precise PSF. Novel methods to improve the pattern of the PSF and reduce the noise are proposed. Furthermore, multiple soiu'ces to extract the PSFs of the imaging system are introduced and the empirical deconvolution results by using each of these PSFs are compared together. The results confirm that a greater improvement attained by applying the in situ PSF during the deconvolution process.

The measurement of the optical absorption cross section of photosystem 1 and photosystem 2 from whole live cells of porphyridium cruentum, in light state 1 and light state 2

The optical cross section of PS I in whole cells of Porphyridium cruentum (UTEX 161), held in either state 1 or state 2, was determined by measuring the change in absorbance at 820nm, an indication of P700+; the X-section of PS2 was determined by measuring the variable fluorescence, (Fv-Fo)/Fo, from PS2. Both cross-sections were 7 determined by fitting Poisson distribution equations to the light saturation curves obtained with single turnover laser flashes which varied in intensity from zero to a level where maximum yield occurred. Flash wavelengths of 574nm, 626nm, and 668nm were used, energy absorbed by PBS, by PBS and chla, and by chla respectively. There were two populations of both PSi and PS2. A fraction of PSi is associated with PBS, and a fraction of PS2 is free from PBS. On the transition S1->S2, only with PBS-absorbed energy (574nm) did the average X-section of PSi increase (27%), and that of PS2 decrease (40%). The fraction of PSi associated with PBS decreased, from 0.65 to 0.35, and the Xsection of this associated PS 1 increased, from 135±65 A2 to 400±300A2. The cross section of PS2 associated with PBS decreased from 150±50 A2 to 85±45 A2, but the fraction of PS2 associated with PBS, approximately 0.75, did not change significantly. The increase in PSi cross section could not be completely accounted for by postulating that several PSi are associated with a single PBS and that in the transition to state2, fewer PSi share the same number of PBS, resulting in a larger X-section. It is postulated that small changes occur in the attachment of PS2 to PBS causing energy to be diverted to the attached PSi. These experiments support neither the mobile-PBS model of state transitions nor that of spillover. From cross section changes there was no evidence of energy transfer from PS2 to PSi with 668nm light. The decrease in PS2 fluorescence which occurred at this wavelength cannot be explained by energy transfer; another explanation must be sought. No explanation was found for an observed decrease in PSi yield at high flash intensities.

Turbines Plans - General Arrangement of Shaft & Cross Section of Turbine, 1903

Two photographs of turbine drawings from the year 1903. The first drawing is titled "10000HP Turbines. Canadian Niagara Power Company. General Arrangement of Shaft." It was last revised 18 May, 1903. The second drawing is titled "10000HP Turbines Canadian Niagara Power Company. Cross Section of Turbine" This drawing revised 6 May, 1903 and 26 June, 1903.

HG 195.45-195.55 Thin Section

Dark brown sediment with clasts ranging from small to large. The grains are sub-angular. Two main domains can be seen. Both are coarse grained, but one contains larger grains and potentially more clay material. Lineations are present throughout the sample in multiple directions. Minor rotation around a few larger clasts can be seen, as well as comet structures.

HG 240.0-240.10 Thin Section

Dark brown sediment with sub-angular to rounded clasts. Contained areas of darker clay material. Contains rotation structures, mainly around rounded clasts. One side of the sample had significantly larger clasts than the other. Two different domains can be seen in this sample; a fine grained domain and a coarse grained domain.

HG 290.45-290.55 Thin Section

Two main domains can be seen in this sample. One is coarse grained with clasts ranging from small to medium in size. The other is very fine grained, and a very dark brown, potentially influenced by organic material. Grain crushing and lineations can be seen in the coarser domain.

HG 295.70-295.80 Thin Section

This sample contains two different domains; a coarse grained domain with well dispersed clasts, and a fine grained domain that potentially contains organics. The coarser grained domain contains comet structures, lineations and minor rotation without a central grain.

Population Ethics, Social Choice Theory, and Two problems in the Measurement of Economic Poverty

Full Text / Article complet

Two novel bis-azomethines derived from quinoxaline-2-carbaldehyde

The Schiff base compounds N,N0-bis[(E)-quinoxalin-2-ylmethylidene] propane-1,3-diamine, C21H18N6, (I), and N,N0-bis[(E)- quinoxalin-2-ylmethylidene]butane-1,4-diamine, C22H20N6, (II), crystallize in the monoclinic crystal system. These molecules have crystallographically imposed symmetry. Compound (I) is located on a crystallographic twofold axis and (II) is located on an inversion centre. The molecular conformations of these crystal structures are stabilized by aromatic pye stacking interactions.