Mise à jour et étude de sources de variation des niveaux d’exposition au chlordane, au BPC, au toxaphène et au mercure chez les Inuits de l’Arctique canadien

La nourriture traditionnelle compose une part essentielle de la culture Inuit. Néanmoins, la contamination de cette nourriture par les organochlorés et les métaux lourds fait l’objet d’une attention toute particulière, car elle excède dans certains cas les recommandations canadiennes. Le but de ce travail est, d’une part de mettre à jour les estimés d’exposition au chlordane, au BPC, au toxaphène et au mercure, et d’autre part d’en explorer certaines sources de variation. Pour ce faire, de nouvelles données sur la concentration de ces contaminants parmi les plus importants aliments traditionnels ont été combinées aux relevés alimentaires assemblés dans l’Arctique canadien en 1998 et 1999, la quantité et le type de nourriture traditionnelle consommés étant supposés ne pas avoir changé. D’après l’ensemble des nouveaux estimés obtenus, les changements dans la banque de données sur les contaminants affectent plus les extrémités des distributions que les mesures de tendance centrale. Les estimés d’apports en organochlorés peuvent être considérés comme toujours actuels étant donné que les cinq types d’aliments pour lesquels il y a des nouvelles données disponibles représentent la majorité de l’exposition totale. En ce qui concerne le mercure, toutefois, des données additionnelles sont nécessaires à propos du caribou, du narval, du muktuk du béluga et de la truite de lac pour générer des niveaux d’exposition plus exacts. Les sources de variations de ces estimés d’exposition ont été explorées en évaluant les coefficients de variation propres aux apports alimentaires et ceux propres aux concentrations de contaminants dans les aliments traditionnels. Il s’avère que la variation attribuable aux méthodes de collecte de données alimentaires est plus élevée que celle attribuable à la mesure des contaminants dans les banques de données. De nouvelles méthodes pour mesurer les niveaux de consommation d’aliments traditionnels devraient être développées.

Contenu total en éléments traces de sols forestiers du Québec méridional

Les sols forestiers constituent un réservoir considérable d’éléments nutritifs disponibles pour soutenir la productivité forestière. Ces sols contiennent aussi une quantité, encore inconnue à ce jour, d’éléments traces biodisponibles provenant de sources anthropiques ou naturelles. Or, plusieurs de ces éléments recèlent un potentiel toxique pour les organismes vivants. Ainsi, la quantification de la concentration et du contenu total en éléments traces des sols forestiers s’avère nécessaire afin d’évaluer les impacts des perturbations sur la qualité des sols. Les objectifs de ce projet de recherche sont: 1) de mesurer le contenu total en éléments traces en phase solide (Ag, As, Ba, Cd, Ce, Co, Cr, Cu, Mn, Ni, Pb, Rb, Se, Sr, Tl, V, Y, Zn) des divers horizons de sols d’écosystèmes forestiers du Québec méridional; 2) d’établir des liens significatifs entre la fraction soluble dans l’eau des éléments traces et les propriétés des horizons de sols et; 3) d’évaluer le rôle de la proximité d’un centre urbain sur les contenus en éléments traces. Pour répondre à ces objectifs, quatre profils de sols situés dans la région de St-Hippolyte et deux situés dans la région de Montréal furent échantillonnés jusqu'à l'atteinte du matériel parental. Les résultats de ce projet de recherche ont révélé que le contenu total en éléments traces présents dans les profils de sols se retrouve en grande partie dans les fragments grossiers du sol. Il a été démontré que la teneur en carbone organique, les complexes organométalliques et les oxydes de fer et d’aluminium dictent la distribution en profil de la majorité des éléments traces étudiés. Finalement, il fut prouvé que la région de Montréal présente des niveaux de contamination en éléments traces (Ag, As, Ba, Cu, Mn, Pb, Rb, Se, Sr, Tl et Zn) supérieurs à ceux rencontrés dans les Laurentides.

Synthesis of polyelectrolyte brushes on silica-based substrates through surface-initiated polymerization : brush characterization and responsiveness to variation in pH and ionic strength

Les brosses de polyélectrolytes font l’objet d’une attention particulière pour de nombreuses applications car elles présentent la capacité de changer de conformation et, par conséquent, de propriétés de surface en réponse aux conditions environnementales appliquées. Le contrôle des principaux paramètres de ces brosses telles que l'épaisseur, la composition et l'architecture macromoléculaire, est essentiel pour obtenir des polymères greffés bien définis. Ceci est possible avec la Polymérisation Radicalaire par Transfert d’Atomes - Initiée à partir de la Surface (PRTA-IS), qui permet la synthèse de brosses polymériques de manière contrôlée à partir d’une couche d'amorceurs immobilisés de manière covalente sur une surface. Le premier exemple d’une synthèse directe de brosses de poly(acide acrylique) (PAA) par polymérisation radicalaire dans l’eau a été démontré. Par greffage d’un marqueur fluorescent aux brosses de PAA et via l’utilisation de la microscopie de fluorescence par réflexion totale interne, le dégreffage du PAA en temps réel a pu être investigué. Des conditions environnementales de pH ≥ 9,5 en présence de sel, se sont avérées critiques pour la stabilité de la liaison substrat-amorceur, conduisant au dégreffage du polymère. Afin de protéger de l’hydrolyse cette liaison substrat-amorceur sensible et prévenir le dégreffage non souhaité du polymère, un espaceur hydrophobique de polystyrène (PS) a été inséré entre l'amorceur et le bloc de PAA stimuli-répondant. Les brosses de PS-PAA obtenues étaient stables pour des conditions extrêmes de pH et de force ionique. La réponse de ces brosses de copolymère bloc a été étudiée in situ par ellipsométrie, et le changement réversible de conformation collapsée à étirée, induit par les variations de pH a été démontré. De plus, des différences de conformation provenant des interactions du bloc de PAA avec des ions métalliques de valence variable ont été obtenues. Le copolymère bloc étudié semble donc prometteur pour la conception de matériaux répondant rapidement a divers stimuli. Par la suite, il a été démontré qu’un acide phosphonique pouvait être employé en tant qu’ amorceur PRTA-IS comme alternative aux organosilanes. Cet amorceur phosphonate a été greffé pour la première fois avec succès sur des substrats de silice et une PRTA-IS en milieux aqueux a permis la synthèse de brosses de PAA et de poly(sulfopropyl méthacrylate). La résistance accrue à l’hydrolyse de la liaison Sisubstrat-O- Pamorceur a été confirmée pour une large gamme de pH 7,5 à 10,5 et a permis l’étude des propriétés de friction des brosses de PAA sous différentes conditions expérimentales par mesure de forces de surface. Malgré la stabilité des brosses de PAA à haute charge appliquée, les études des propriétés de friction ne révèlent pas de changement significatif du coefficient de friction en fonction du pH et de la force ionique.

Cross-sectoral variation in the volatility of plant-level idiosyncratic shocks

We estimate the volatility of plant–level idiosyncratic shocks in the U.S. manufacturing sector. Our measure of volatility is the variation in Revenue Total Factor Productivity which is not explained by either industry– or economy–wide factors, or by establishments’ characteristics. Consistent with previous studies, we find that idiosyncratic shocks are much larger than aggregate random disturbances, accounting for about 80% of the overall uncertainty faced by plants. The extent of cross–sectoral variation in the volatility of shocks is remarkable. Plants in the most volatile sector are subject to about six times as much idiosyncratic uncertainty as plants in the least volatile. We provide evidence suggesting that idiosyncratic risk is higher in industries where the extent of creative destruction is likely to be greater.

Contributions of local, lateral and contextual habitat variables to explaining variation in fisheries productivity metrics in the littoral zone of a reservoir

Puisque l’altération des habitats d’eau douce augmente, il devient critique d’identifier les composantes de l’habitat qui influencent les métriques de la productivité des pêcheries. Nous avons comparé la contribution relative de trois types de variables d’habitat à l’explication de la variance de métriques d’abondance, de biomasse et de richesse à l’aide de modèles d’habitat de poissons, et avons identifié les variables d’habitat les plus efficaces à expliquer ces variations. Au cours des étés 2012 et 2013, les communautés de poissons de 43 sites littoraux ont été échantillonnées dans le Lac du Bonnet, un réservoir dans le Sud-est du Manitoba (Canada). Sept scénarios d’échantillonnage, différant par l’engin de pêche, l’année et le moment de la journée, ont été utilisés pour estimer l’abondance, la biomasse et la richesse à chaque site, toutes espèces confondues. Trois types de variables d’habitat ont été évalués: des variables locales (à l’intérieur du site), des variables latérales (caractérisation de la berge) et des variables contextuelles (position relative à des attributs du paysage). Les variables d’habitat locales et contextuelles expliquaient en moyenne un total de 44 % (R2 ajusté) de la variation des métriques de la productivité des pêcheries, alors que les variables d’habitat latérales expliquaient seulement 2 % de la variation. Les variables les plus souvent significatives sont la couverture de macrophytes, la distance aux tributaires d’une largeur ≥ 50 m et la distance aux marais d’une superficie ≥ 100 000 m2, ce qui suggère que ces variables sont les plus efficaces à expliquer la variation des métriques de la productivité des pêcheries dans la zone littorale des réservoirs.

Intraseasonal oscillation of total precipitable water over North Indian Ocean and its application in the diagnostic study of coastal rainfall

TRMM Microwave Imager (TMI) is reported to be a useful sensor to measure the atmospheric and oceanic parameters even in cloudy conditions. Vertically integrated specific humidity, Total Precipitable Water (TPW) retrieved from the water vapour absorption channel (22GHz.) along with 10m wind speed and rain rate derived from TMI is used to investigate the moisture variation over North Indian Ocean. Intraseasonal Oscillations (ISO) of TPW during the summer monsoon seasons 1998, 1999, and 2000 over North Indian Ocean is explored using wavelet analysis. The dominant waves in TPW during the monsoon periods and the differences in ISO over Arabian Sea and Bay of Bengal are investigated. The northward propagation of TPW anomaly and its coherence with the coastal rainfall is also studied. For the diagnostic study of heavy rainfall spells over the west coast, the intrusion of TPW over the North Arabian Sea is seen to be a useful tool.

Spatial and Temporal Variation of Microbial Community Structure In Surficial Sediments of Cochin Estuary

This thesis entitled spatial and temporal variarion of microbial community structure in surficial sediments of cochin estuary.In the estuarine and coastal systems, organic matter (OM) is derived not only from autochthonous primary production, but also from allochthonous (terrestrial) organic matter (OM) delivered by river discharge and runoff. A significant portion of the OM sinks through the water column and is ultimately stored in carbon pool in the sediments.Analysis of spatial and temporal variation in benthic microbial community of a tropical estuary was conducted for the first time using non selective measures that affirms that PLFA approach is a sensitive and reliable method in determining microbial community structures of surficial sediments of estuary.The close relationship between the concentrations of the microbial fatty acids and total biomass indicates that bacteria could account for the largest proportion of the biomass in the sediments.This is first study that has documented the changes in microbial community composition linkage to biotic and abiotic variables in benthic estuarine ecosystem. This contemporaneous community will be the backdrop for understanding the response of autochthonous community to increasing anthropogenic stress.

Depth wise variation of microbial load in the soils of midland region of Kerala: a function of important soil physicochemical characteristics and nutrients

Soil microorganisms play a main part in organic matter decomposition and are consequently necessary to soil ecosystem processes maintaining primary productivity of plants. In light of current concerns about the impact of cultivation and climate change on biodiversity and ecosystem performance, it is vital to expand a complete understanding of the microbial community ecology in our soils. In the present study we measured the depth wise profile of microbial load in relation with important soil physicochemical characteristics (soil temperature, soil pH, moisture content, organic carbon and available NPK) of the soil samples collected from Mahatma Gandhi University Campus, Kottayam (midland region of Kerala). Soil cores (30 cm deep) were taken and the cores were separated into three 10-cm depths to examine depth wise distribution. In the present study, bacterial load ranged from 141×105 to 271×105 CFU/g (10cm depth), from 80×105 to 131×105 CFU/g (20cm depth) and from 260×104 to 47×105 CFU/g (30cm depth). Fungal load varies from 124×103 to 27×104 CFU/g, from 61×103 to110×103 CFU/g and from 16×103 to 49×103 CFU/g at 10, 20 and 30 cm respectively. Actinomycetes count ranged from 129×103 to 60×104 CFU/g (10cm), from 70×103 to 31×104 CFU/g (20cm) and from 14×103 to 66×103 CFU/g (30cm). The study revealed that there was a significant difference in the depthwise distribution of microbial load and soil physico-chemical properties. Bacterial, fungal and actinomycetes load showed a decreasing trend with increasing depth at all the sites. Except pH all other physicochemical properties showed decreasing trend with increasing depth. The vertical profile of total microbial load was well matched with the depthwise profiles of soil nutrients and organic carbon that is microbial load was highest at the soil surface where organics and nutrients were highest

Heavy metal tolerance patterns of total heterotrophic bacteria isolated from the soils of Mahatma Gandhi University campus, Kottayam, Kerala

Industrialization of our society has led to an increased production and discharge of both xenobiotic and natural chemical substances. Many of these chemicals will end up in the soil. Pollution of soils with heavy metals is becoming one of the most severe ecological and human health hazards. Elevated levels of heavy metals decrease soil microbial activity and bacteria need to develop different mechanisms to confer resistances to these heavy metals. Bacteria develop heavy-metal resistance mostly for their survivals, especially a significant portion of the resistant phenomena was found in the environmental strains. Therefore, in the present work, we check the multiple metal tolerance patterns of bacterial strains isolated from the soils of MG University campus, Kottayam. A total of 46 bacterial strains were isolated from different locations of the campus and tested for their resistant to 5 common metals in use (lead, zinc, copper, cadmium and nickel) by agar dilution method. The results of the present work revealed that there was a spatial variation of bacterial metal resistance in the soils of MG University campus, this may be due to the difference in metal contamination in different sampling location. All of the isolates showed resistance to one or more heavy metals selected. Tolerance to lead was relatively high followed by zinc, nickel, copper and cadmium. About 33% of the isolates showed very high tolerance (>4000μg/ml) to lead. Tolerance to cadmium (65%) was rather low (<100 μg/ml). Resistance to zinc was in between 100μg/ml - 1000μg/ml and the majority of them shows resistance in between 200μg/ml - 500μg/ml. Nickel resistance was in between 100μg/ml - 1000μg/ml and a good number of them shows resistance in between 300μg/ml - 400μg/ml. Resistance to copper was in between <100μg/ml - 500μg/ml and most of them showed resistance in between 300μg/ml - 400μg/ml. From the results of this study, it was concluded that heavy metal-resistant bacteria are widely distributed in the soils of MG university campus and the tolerance of heavy metals varied among bacteria and between locations

SPATIOTEMPORAL VARIATION AND ANTIBACTERIAL ACTIVITY OF ACTINOMYCETES ISOLATED FROM HIGH ALTITUDE GRASSLAND SOILS OF TROPICAL MONTANE FOREST – KERALA, INDIA

TThe invention of novel antibiotics and other bioactive microbial metabolites continues to be an important aim in new drug discovery programmes. Actinomycetes have the potential to synthesize lots of diverse biologically vigorous secondary metabolites and in the last decades actinomycetes became the most productive source for antibiotics. Therefore in the present study we analyze the antibacterial activity of the actinomycetes isolated from grassland soil samples of Tropical Montane forest. A total of 33 actinomycete strains isolated were characterized and screened for antibacterial activities using well diffusion method against six specific pathogenic organisms. Identification of the isolates revealed that the majority of them were belonging to Streptomycetes followed by Nocardia, Micromonospora, Pseudonocardia, Streptosporangium, Nocardiopsis and Saccharomonospora. Among the 33 isolates, Gr1 strain showed antagonistic activity against all checked pathogens. Nine strains showed antibacaterial activity against Listeria, Vibrio cholera, Bacillus cereus, Staphylococcus aureus and Salmonella typhi and only 2 strains (Gr1and Gr25) showed antagonism to E. coli. The overall percentage of activity of actinomycetes isolates against each pathogenic bacterium was also calculated. While 63.63% of the actinomycetes were antagoinistic against Listeria, Vibrio cholerae, and Bacillus cereus, 60.6% of them were antagonistic to Staphylococcus aureus. Very few isolates (6.06%) showed antibacterial activity against E. coli. In general most of the actinomycetes isolates were antagonistic to grampositive bacteria such as Listeria, Bacillus and Staphylococcus than Gram-negative bacteria Vibrio cholerae, E. coli and Salmonella

Evaluation of Somaclonal Variation in Callus Cultures of Jatropha curcas Maintained on Different Hormonal Combinations Using RAPD Markers

Random genetic changes generated during in vitro culture are not desirable for plant micropropagation and genetic transformation. RAPD markers were used to detect the variation in leaf disc callus cultures of Jatropha curcas, maintained in Murashige and Skoog (MS) medium with different auxin and cytokinin combinations. In total 41 scorable bands were produced with 11 primers. Out of 41 bands, 37 were polymorphic (91.12%). The average number of polymorphic bands was 3.36 per primer. The highest similarity (0.82) with mother plant was seen in callus maintained on MS with hormonal combination Indole butyric acid - 0.4mg/l+ N6-benzyladenine purine - 4.0 mg/l. The callus grown on MS with hormonal combinations IBA- 0.4mg/l+ BAP- 2.0mg/l, IBA- 0.4mg/l+ BAP- 2.5mg/l and IBA- 0.6 mg/l+ BAP- 2.0 mg/l also showed similarity with the mother plant. Callus maintained on MS with hormonal combination IBA- 0.2mg/l+ BAP- 2.0 mg/l was found to show least similarity (0.53) with mother plant

Effect of within-litter birth weight variation on piglet survival and pre-weaning weight gain in a commercial herd

There are several factors that affect piglet survival and this has a bearing on sow productivity. Ten variables that influence pre-weaning vitality were analysed using records from the Pig Industry Board, Zimbabwe. These included individual piglet birth weight, piglet origin (nursed in original litter or fostered), sex, relative birth weight expressed as standard deviation units, sow parity, total number of piglets born, year and month of farrowing, within-litter variability and the presence of stillborn or mummified littermates. The main factors that influenced piglet mortality were fostering, parity and within-litter variability especially the weight of the individual piglet relative to the average of the litter (P<0.05). Presence of a mummified or stillborn littermate, which could be a proxy for unfavourable uterine environment or trauma during the birth process, did not influence pre-weaning mortality. Variability within a litter and the deviation of the weight of an individual piglet from the litter mean, influenced survival to weaning. It is, therefore, advisable for breeders to include uniformity within the litter as a selection criterion. The recording of various variables by farmers seems to be a useful management practice to identify piglets at risk so as to establish palliative measures. Further, farmers should know which litters and which piglets within a litter are at risk and require more attention.

The variation of solar wind correlation lengths over three solar cycles

We present the results of a study of solar wind velocity and magnetic field correlation lengths over the last 35 years. The correlation length of the magnetic field magnitude λ | B| increases on average by a factor of two at solar maxima compared to solar minima. The correlation lengths of the components of the magnetic field λ_{B_{XYZ}} and of the velocity λ_{V_{YZ}} do not show this change and have similar values, indicating a continual turbulent correlation length of around 1.4×106 km. We conclude that a linear relation between λ | B|, VB 2, and Kp suggests that the former is related to the total magnetic energy in the solar wind and an estimate of the average size of geoeffective structures, which is, in turn, proportional to VB 2. By looking at the distribution of daily correlation lengths we show that the solar minimum values of λ | B| correspond to the turbulent outer scale. A tail of larger λ | B| values is present at solar maximum causing the increase in mean value.

Intra-specific variation affects the structure of the natural enemy assemblage attacking pea aphid colonies

1. Intra-specific variation in plant defence traits has been shown to profoundly affect herbivore community structure. Here we describe two experiments designed to test whether similar effects occur at higher trophic levels, by studying pea aphid–natural enemy interactions in a disused pasture in southern England. 2. In the first experiment, the numbers and identity of natural enemies attacking different monoclonal pea aphid colonies were recorded in a series of assays throughout the period of pea aphid activity. 3. In the summer assay, there was a significant effect of clone on the numbers of aphidophagous hoverfly larvae and the total number of non-hoverfly natural enemies recruited. Clone also appeared to influence the attack rate suffered by the primary predator in the system, the hoverfly Episyrphus balteatus, by Diplazon laetatorius, an ichneumonid parasitoid. Colonies were generally driven to extinction by hoverfly attack, resulting in the recording of low numbers of parasitoids and entomopathogens, suggesting intense intra-guild predation. 4. To further examine the influence of clonal variation on the recruitment of natural enemies, a second experiment was performed to monitor the temporal dynamics of community development. Colonies were destructively sampled every other day and the numbers of natural enemies attacking aphid colonies were recorded. These data demonstrated that clonal variation influenced the timing, abundance, and identity of natural enemies attacking aphid colonies. 5. Taken together, these data suggest that clonal variation may have a significant influence on the patterns of interactions between aphids and their natural enemies, and that such effects are likely to affect our understanding of the ecology and biological control of these insect herbivores.

Exudate flavones and flavanones in Origanum species and their interspecific variation

Surface flavonoids in nine species of Origanum, representing taxa from all three of the currently recognised subgeneric groups, were examined both by HPLC coupled to diode-array detection and APCI-MS. Many of the flavonoids present were characterised by O-substituent at C-6 (OH, OMe) and/or C-8 (OMe). In total, 25 flavones and flavanones are described in this study, of which 13 are new to the genus and 5,4'-dihydroxy-6,7,3'-trimethoxyflavanone is reported for the first time. Taxa in subgeneric Group A accumulated flavonoids with methoxyl groups at both C-6 and C-4'; however, taxa in subgeneric Group B did not accumulate 4'-methoxylated compounds, and taxa in Group C did not accumulate 6-methoxylated compounds. (C) 2008 Elsevier Ltd. All rights reserved.