MULTIVARIATE CLASSIFICATION BASED ON METAL CONTENTS IN HUMAN SENILE CATARACT LENSES

Multivariate classification methods were used to evaluate data on the concentrations of eight metals in human senile lenses measured by atomic absorption spectrometry. Principal components analysis and hierarchical clustering separated senile cataract lenses, nuclei from cataract lenses, and normal lenses into three classes on the basis of the eight elements. Stepwise discriminant analysis was applied to give discriminant functions with five selected variables. Results provided by the linear learning machine method were also satisfactory; the k-nearest neighbour method was less useful.

Investigation on inhibition behavior of S-triazole-triazole derivatives in acidic solution

Four main methods, such as weight loss test, EIS, adsorption isotherm and quantum chemical calculation were employed to study the inhibition efficiency and mechanism of three derivatives on mild steel in acid solution, whose inhibition efficiency were proved to follow the order of DMTT > NMTT > PMTT, The adsorption model of DMTT was established at different temperature according to the fitted results. The quantum chemical results indicated that the adsorption sites of the derivatives were strongly centralized on benzene ring, triazole ring, etc. QSAR was set up to explain the relationship of molecular structure and the inhibition effect of the derivatives. (C) 2008 Elsevier Ltd. All rights reserved.

The role of plug design in determining wall thickness distribution in thermoforming

An experimental investigation has been carried out into the effects of changes in plug design on the wall thickness distribution of thermoformed products. Plugs were machined with a series of geometrical variations and their effects on the process were measured. The overall results show that the plug has a crucial role in controlling the wall thickness distribution in thermoforming. Larger plugs tend to distribute more material to the base of the product, but the introduction of a small sidewall taper, base radius, or a reduction in plug diameter tend to lead to more balanced distributions. However, larger changes in any of the variables tend to destroy these benefits. It has also been demonstrated that the frictional and thermal properties of the plug are important in determining the deformation response of the sheet material. There is a clear evidence of slip in the sheet during plug contact and, although the cooling effect of the plug appears to be minimal, cooling in the highly deformed regions away from the plug appears to be a significant factor.

The Role of Process Parameters in Determining Wall Thickness Distribution in Plug-Assisted Thermoforming

This article describes the results of a comprehensive investigation to determine the link between process parameters and observed wall thickness output for the plug-assisted thermoforming process. The overall objective of the work was to systematically investigate the process parameters that may be adjusted during production to control the wall thickness distribution of parts manufactured by plug-assisted thermoforming. The parameters investigated were the sheet temperature, plug temperature, plug speed, plug displacement, plug shape, and air pressure. As well as quantifying the effects of each parameter on the wall thickness distribution, a further aim of the work was to improve the understanding of the physical mechanisms of deformation of the sheet during the different stages of the process. The process parameters shown to have the greatest effect on experimentally determined wall thickness distribution were the plug displacement, sheet temperature, plug temperature, and plug shape. It is proposed that during the plug-assisted thermoforming of polystyrene the temperature dependent friction between the plug and sheet surface was the most important factor in determining product wall thickness distribution, whereas heat transfer was shown to play a less important role. POLYM. ENG. SCI., 2010. © 2010 Society of Plastics Engineers

Meta analysis of the effects of lithium usage on serum creatinine levels

There is conflicting evidence concerning lithium’s effect on renal function. The aim is to clarify whether lithium affects kidney function and at what stage of treatment any effect may occur. Systematic review identified 23 studies split into three groups on which meta-analysis was performed to identify the following: A) lithium’s effect on renal function in cross-sectional case-control studies, B) studies of renal function before and after commencement on lithium, C) studies of longer term effect in those already established on lithium therapy. Group A showed a statistically significant increase of 5.7 µmol/L in creatinine in the study population compared with controls. Group B showed a non-statistically significant rise in creatinine (2.9 µmol/L) after a mean follow-up of 86 months. Group C showed a statistically significant increase in creatinine of 7.0 µmol/L over a mean duration of 64 months. An increase in creatinine of an average of 1.6 µmol/L/year on lithium was also identified in this group. Any lithium-associated increase in serum creatinine is quantitatively small and of questionable clinical significance. However, routine renal function monitoring of patients on lithium is essential.

Shifting Ground:Beyond National Architecture

The Irish Pavilion at the Venice Architecture Biennale 2012 charts a position for Irish architecture in a global culture where the modes of production of architecture are radically altered. Ireland is one of the most globalised countries in the world, yet it has developed a national culture of architecture derived from local place as a material construct. We now have to evolve our understanding in the light of the globalised nature of economic processes and architectural production which is largely dependent on internationally networked flows of products, data, and knowledge. We have just begun to represent this situation to ourselves and others. How should a global architecture be grounded culturally and philosophically? How does it position itself outside of shared national reference points?
heneghan peng architects were selected as participants because they are working across three continents on a range of competition-winning projects. Several of these are in sensitive and/or symbolic sites that include three UNESCO World Heritage sites, including the Grand Egyptian Museum in Cairo, the Giants Causeway Visitor Centre in Northern Ireland, and the new Rhine Bridge near Lorelei.
Our dialogue led us to discussing the universal languages of projective geometry and number are been shared by architects and related professionals. In the work of heneghan peng, the specific embodiment of these geometries is carefully calibrated by the choice of materials and the detailed design of their physical performance on site. The stone facade of the Giant’s Causeway Visitor Centre takes precise measure of the properties of the volcanic basalt seams from which it is hewn. The extraction of the stone is the subject of the pavilion wall drawings which record the cutting of stones to create the façade of the causeway centre.
We also identified water as an element which is shared across the different sites. Venice is a perfect place to take measure of this element which suggests links to another site – the Nile Valley which was enriched by the annual flooding of the River Nile. An ancient Egyptian rod for measuring the water level of the Nile inspired the design of the Nilometre - a responsive oscillating bench that invites visitors to balance their respective weights. This action embodies the ways of thinking that are evolving to operate in the globalised world, where the autonomous architectural object is dissolving into an expanded field of conceptual rules and systems. The bench constitutes a shifting ground located in the unstable field of Venice. It is about measurement and calibration of the weight of the body in relation to other bodies; in relation to the site of the installation; and in relation to water. The exhibit is located in the Artiglierie section of the Arsenale. Its level is calibrated against the mark of the acqua alta in the adjacent brickwork of the building which embodies a liminal moment in the fluctuating level of the lagoon.
The weights of bodies, the level of water, changes over time, are constant aspects of design across cultures and collectively they constitute a common ground for architecture - a ground shared with other design professionals. The movement of the bench required complex engineering design and active collaboration between the architects, engineers and fabricators. It is a kind of prototype – a physical object produced from digital data that explores the mathematics at play – the see-saw motion invites the observer to become a participant, to give it a test drive. It shows how a simple principle can generate complex effects that are difficult to predict and invites visitors to experiment and play with them.

The effect of choice on motivation for young children on the autism spectrum during discrete trial teaching

Self-determination and decision-making are acknowledged internationally as key rights of persons with disabilities and should play an important role in the development of educational plans and procedures. Not only is the chance for individuals with developmental disabilities to select their own tasks, leisure activities or reinforcers a valuable way of enhancing rights-based education and personal dignity, but choice-making opportunities may also function as a useful clinical or educational tool if they actually improve the efficacy of programmes aimed at the acquisition of socially relevant behaviours and life skills or the reduction of challenging behaviours.

The study reported here assessed whether or not choice affected effectiveness of an educational procedure for three children on the autism spectrum. Following a preference assessment, a number of discrete teaching trials were conducted with each child and, contingent upon targeted responses, either the child or the therapist selected one of three preferred reinforcer items. Reinforcer choice did not affect intervention effectiveness for two of the children; however, performance and motivation improved for the third child. Results re-affirmed the importance of thorough preference assessments prior to intervention and showed that additional stimulus choice contingent on the target response may improve motivation and outcomes for some children.

Hygrothermal performance of wood-hemp insulation in timber frame wall panels with and without a vapour barrier

An in situ experiment on a full-scale timber frame test building was carried out to study the hygrothermal performance of wood-hemp composite insulation in timber frame wall panels with and without a vapour barrier. The heat transfer properties and the likelihood of mould growth and condensation in the panels were compared. Step changes in the internal relative humidity were performed to explore the effects of high, normal and low internal moisture loads on the wall panels. No significant difference in the average equivalent thermal transmittance (U-values) between the panels with and without a vapour barrier was observed. The average equivalent U-values of the panels were close to the U-values calculated from the manufacturers’ declared thermal conductivity values of the insulation. The likelihood of condensation was higher at the interface of the wood-hemp insulation and the oriented strand board (OSB) in the panel without a vapour barrier. In terms of the parametric assessment of the mould germination potential, the relative humidity, the temperature and the exposure conditions in the insulation-OSB interfaces of the panel without a vapour barrier were found to be more favourable to the germination of mould spores. Nonetheless, when the insulations were dismantled, no mould was visually detected.

The comparative in situ hygrothermal performance of Hemp and Stone Wool insulations in vapour open timber frame wall panels

An in situ experiment in a full scale timber frame test building was carried out to compare the hygrothermal performance of Hemp and Stone Wool insulations of identical thermal conductivity. Hemp and Stone Wool insulations were installed in timber frame wall panels without vapour barrier. The comparison was made in terms of heat transfer properties, likelihood of mould growth and condensation. Step changes in internal relative humidity were performed to explore the effect of high and normal internal moisture load on the wall panels. No significant difference between the average equivalent thermal transmittance (U-values) of the panels incorporating Hemp and Stone Wool insulations was observed. The average equivalent U-values of the panels were closer to the calculated U-values of the panels based on the manufacturers’ declared thermal conductivity of Hemp and Stone Wool insulations. It was observed that the placement of heat flux sensor along the depth of the insulation had significant influence on the measured equivalent U-value of the panels during high internal moisture load. The frequency and likelihood of condensation was higher in the interface of Stone Wool and Oriented Strand Board (OSB). In terms of the parametric assessment of mould germination potential, relative humidity, temperature and exposure conditions in the insulation-OSB interfaces were found to be favourable to germination of mould spore. However, when the insulations were dismantled, no mould was visually detected.

Three essays in risky behaviors

A PhD Dissertation, presented as part of the requirements for the Degree of Doctor of Philosophy from the NOVA - School of Business and Economics

Biological colonization on majolica glazed tiles: biodeterioration, bioreceptivity and mitigation strategies

The impact of microbial activity on the deterioration of cultural heritage is a well-recognized global problem. Glazed wall tiles constitute an important part of the worldwide cultural heritage. When exposed outdoors, biological colonization and consequently biodeterioration may occur. Few studies have dealt with this issue, as shown in the literature review on biodiversity, biodeterioration and bioreceptivity of architectural ceramic materials. Due to the lack of knowledge on the biodeteriogens affecting these assets, the characterization of microbial communities growing on Portuguese majolica glazed tiles, from Pena National Palace (Sintra, Portugal) and another from Casa da Pesca (Oeiras, Portugal) was carried out by culture and molecular biology techniques. Microbial communities were composed of microalgae, cyanobacteria, bacteria and fungi, including a new fungal species (Devriesia imbrexigena) described for the first time. Laboratory-based colonization experiments were performed to assess the biodeterioration patterns and bioreceptivity of glazed wall tiles produced in laboratory. Microorganisms previously identified on glazed tiles were inoculated on pristine and artificially aged tile models and incubated under laboratory conditions for 12 months. Phototrophic microorganisms were able to grow into glaze fissures and the tested fungus was able to form oxalates over the glaze. The bioreceptivity of artificially aged tiles was higher for phototrophic microorganisms than pristine tile models. A preliminary approach on mitigation strategies based on in situ application of commercial biocides and titanium dioxide (TiO2) nanoparticles on glazed tiles demonstrated that commercial biocides did not provide long term protection. In contrast, TiO2 treatment caused biofilm detachment. In addition, the use of TiO2 thin films on glazed wall tiles as a protective coating to prevent biological colonization was analysed under laboratorial conditions. Finally, conservation notes on tiles exposed to biological colonization were presented.

Effects of reflection and social isolation on crayfish behaviour /

Visual stimuli and socialization influence exploratory behaviour in crayfish. The predominant components of spontaneous exploratory behaviour were determined by observing the activity of solitary adult crayfish (Procambarus clarkii) in a glass aquarium containing fresh water and no objects. Five distinct behaviours were observed: rearing up (climbing on the wall), turning around, cornering (facing the comer), backward walking, and crossing (crossing the midline of the aquarium). The frequency of rearing up, cornering and turning around decreased when reflection from the glass wall was blocked with black cardboard, black paint or non-reflective transparent plastic. In a tank containing mirrors on one side and non-reflective plastic on the other, crayfish cornered, reared up, and turned around more in front of the mirrors. Socialization was necessary for crayfish to respond to the reflection. Crayfish that were housed in pairs for two weeks exhibited more rearing up, turning around and cornering in front of the mirrors than in the non-reflective side. Crayfish isolated for two weeks did not show these differences. Socialized crayfish also exhibited more rearing up, turning around and cornering than did isolated crayfish. Thus, crayfish respond to visual stimuli provided by a glass tank, but the responds depends on socialization.

Essays on bootstrap in econometrics

Ma thèse est composée de trois essais sur l'inférence par le bootstrap à la fois dans les modèles de données de panel et les modèles à grands nombres de variables instrumentales #VI# dont un grand nombre peut être faible. La théorie asymptotique n'étant pas toujours une bonne approximation de la distribution d'échantillonnage des estimateurs et statistiques de tests, je considère le bootstrap comme une alternative. Ces essais tentent d'étudier la validité asymptotique des procédures bootstrap existantes et quand invalides, proposent de nouvelles méthodes bootstrap valides. Le premier chapitre #co-écrit avec Sílvia Gonçalves# étudie la validité du bootstrap pour l'inférence dans un modèle de panel de données linéaire, dynamique et stationnaire à effets fixes. Nous considérons trois méthodes bootstrap: le recursive-design bootstrap, le fixed-design bootstrap et le pairs bootstrap. Ces méthodes sont des généralisations naturelles au contexte des panels des méthodes bootstrap considérées par Gonçalves et Kilian #2004# dans les modèles autorégressifs en séries temporelles. Nous montrons que l'estimateur MCO obtenu par le recursive-design bootstrap contient un terme intégré qui imite le biais de l'estimateur original. Ceci est en contraste avec le fixed-design bootstrap et le pairs bootstrap dont les distributions sont incorrectement centrées à zéro. Cependant, le recursive-design bootstrap et le pairs bootstrap sont asymptotiquement valides quand ils sont appliqués à l'estimateur corrigé du biais, contrairement au fixed-design bootstrap. Dans les simulations, le recursive-design bootstrap est la méthode qui produit les meilleurs résultats. Le deuxième chapitre étend les résultats du pairs bootstrap aux modèles de panel non linéaires dynamiques avec des effets fixes. Ces modèles sont souvent estimés par l'estimateur du maximum de vraisemblance #EMV# qui souffre également d'un biais. Récemment, Dhaene et Johmans #2014# ont proposé la méthode d'estimation split-jackknife. Bien que ces estimateurs ont des approximations asymptotiques normales centrées sur le vrai paramètre, de sérieuses distorsions demeurent à échantillons finis. Dhaene et Johmans #2014# ont proposé le pairs bootstrap comme alternative dans ce contexte sans aucune justification théorique. Pour combler cette lacune, je montre que cette méthode est asymptotiquement valide lorsqu'elle est utilisée pour estimer la distribution de l'estimateur split-jackknife bien qu'incapable d'estimer la distribution de l'EMV. Des simulations Monte Carlo montrent que les intervalles de confiance bootstrap basés sur l'estimateur split-jackknife aident grandement à réduire les distorsions liées à l'approximation normale en échantillons finis. En outre, j'applique cette méthode bootstrap à un modèle de participation des femmes au marché du travail pour construire des intervalles de confiance valides. Dans le dernier chapitre #co-écrit avec Wenjie Wang#, nous étudions la validité asymptotique des procédures bootstrap pour les modèles à grands nombres de variables instrumentales #VI# dont un grand nombre peu être faible. Nous montrons analytiquement qu'un bootstrap standard basé sur les résidus et le bootstrap restreint et efficace #RE# de Davidson et MacKinnon #2008, 2010, 2014# ne peuvent pas estimer la distribution limite de l'estimateur du maximum de vraisemblance à information limitée #EMVIL#. La raison principale est qu'ils ne parviennent pas à bien imiter le paramètre qui caractérise l'intensité de l'identification dans l'échantillon. Par conséquent, nous proposons une méthode bootstrap modifiée qui estime de facon convergente cette distribution limite. Nos simulations montrent que la méthode bootstrap modifiée réduit considérablement les distorsions des tests asymptotiques de type Wald #$t$# dans les échantillons finis, en particulier lorsque le degré d'endogénéité est élevé.

Essays on education and family planning

Le capital humain d’un pays est un facteur important de sa croissance et de son développement à long terme. Selon l’Unicef, ce capital humain est constitué en donnant à chaque enfant un bon départ dans la vie : non seule- ment la possibilité de survivre, mais aussi les conditions nécessaires pour se développer et réaliser tout son potentiel. Malheureusement, cet état de fait est loin d’être une réalité en Afrique Subsaharienne. En effet, selon toujours l’Unicef et sur la base d’enquêtes ménages dans 21 pays d’Afrique de l’Ouest et du Centre, c’est près de 32 millions d’enfants qui ont l’âge officiel d’être scolarisés, mais qui ne le sont pas. A ces chiffres, il faut ajouter 17 millions d’enfants scolarisés qui risquent fortement l’exclusion. De son Côté, l’OMS pointe du doigt la mauvaise santé des enfants dans cette région. Ainsi, les décès d’enfants sont de plus en plus concentrés en Afrique subsaharienne où les enfants ont plus de 15 fois plus de risques de mourir avant l’âge de cinq ans que les enfants des régions développées. Les difficultés économiques apparaissent comme la première explication des obstacles à l’amélioration du bien être des enfants aussi bien du côté de l’offre que de la demande. Cette thèse relie trois essais sur d’une part le lien entre conflit armés, l’éducation et la mortalité des enfants et d’autre part sur le lien entre fertilité et éducation des enfants en milieu urbain. Le premier chapitre identifie l’impact de la crise politico-militaire de la Côte d’Ivoire sur le bien être des enfants, en particulier sur l’éducation et la mor- talité infanto-juvénile en exploitant la variation temporelle et géographique de la crise. Il ressort de cette analyse que les individus qui vivaient dans les régions de conflit et qui ont atteint durant la crise, l’âge officiel d’entrer à l’école ont 10% moins de chance d’être inscrits à l’école. Les élèves qui habitaient dans des régions de conflit pendant la crise ont subit une diminu- tion du nombre d’années scolaire d’au moins une année. Les élèves les plus v vi âgés et qui sont susceptibles d’être au secondaire ont connu une décroissance du nombre d’année scolaire d’au moins deux années. Il ressort également que la crise ivoirienne a accru la mortalité infanto-juvénile d’au moins 3%. Mes résultats suggèrent également que la détérioration des conditions de vie et la limitation de l’utilisation des services de santé au cours du conflit con- tribuent à expliquer ces effets négatifs. Des tests de robustesse incluant un test de placebo suggèrent que les résultats ne sont pas dus à des différences préexistantes entre les régions affectées par le conflit et celles non affectées. Le deuxième chapitre étudie les disparités intra-urbaines en matière d’arbitrage entre le nombre d’enfant et la scolarisation des enfants en se focalisant sur le cas de Ouagadougou (Capitale du Burkina Faso). Dans cette ville, au moins 33% des deux millions d’habitants vivent dans des zones informelles (appelées localement des zones non-loties). Cette sous-population manque d’infrastructures socioéconomiques de base et a un niveau d’éducation très bas. Dans ce chapitre, prenant en compte la possible endogénéité du nombre d’enfants et en utilisant une approche "two-step control function" avec des modèles Probit, nous investiguons les différences de comportement des mé- nages en matière de scolarisation entre zones formelles et zones informelles. Nous nous focalisons en particulier sur l’arbitrage entre la "quantité" et la "qualité" des enfants. Compte tenu de l’hétérogénéité des deux types de zones, nous utilisons les probabilités prédites pour les comparer. Nos princi- pales conclusions sont les suivantes. Tout d’abord, nous trouvons un impact négatif de la taille de la famille sur le niveau de scolarisation dans les deux types de zone. Cependant, nous constatons que l’impact est plus aigu dans les zones informelles. Deuxièmement, si nous supposons que le caractère en- dogène du nombre d’enfants est essentiellement due à la causalité inverse, les résultats suggèrent que dans les zones formelles les parents tiennent compte de la scolarisation des enfants dans la décision de leur nombre d’enfants, mais ce ne est pas le cas dans les zones informelles. Enfin, nous constatons que, pour des familles avec les mêmes caractéristiques observables, la probabilité d’atteindre le niveau post-primaire est plus élevée dans les zones formelles que dans les zones informelles. En terme d’implications politique, selon ces résultats, les efforts pour améliorer la scolarisation des enfants ne doivent pas être dirigées uniquement vers les zones rurales. En plus de réduire les frais de scolarité dans certaines zones urbaines, en particulier les zones informelles, un accent particulier devrait être mis sur la sensibilisation sur les avantages de l’éducation pour le bien-être des enfants et leur famille. Enfin, du point vii de vue méthodologique, nos résultats montrent l’importance de tenir compte de l’hétérogénéité non observée entre les sous-populations dans l’explication des phénomènes socio-économiques. Compte tenu du lien négatif entre la taille de la famille et la scolarisation des enfants d’une part et les différences intra-urbaines de comportement des ménages en matière de scolarisation, le trosième chapitre étudie le rôle des types de méthodes contraceptives dans l’espacement des naissances en mi- lieu urbain. Ainsi, en distinguant les méthodes modernes et traditionnelles et en utilisant l’histoire génétique des femmes, ce chapitre fait ressortir des différences de comportement en matière de contraception entre les femmes des zones formelles et informelles à Ouagadougou (capitale du Burkina Faso). Les résultats montrent que les deux types de méthodes contraceptives aug- mentent l’écart des naissances et diminuent la probabilité qu’une naissance se produise moins de 24 mois après la précédente. Prendre en compte les caractéristiques non observées mais invariants avec le temps ne modifie pas significativement l’amplitude du coefficient de l’utilisation de la contracep- tion moderne dans les deux types de zone. Toutefois, dans la zone informelle, la prise en compte les effets fixes des femmes augmentent significativement l’effet des méthodes traditionnelles. Les normes sociales, la perception de la planification familiale et le rôle du partenaire de la femme pourraient expli- quer ces différences de comportement entre les zones formelles et informelles. Par conséquent, pour améliorer l’utilisation de la contraception et de leur efficacité, il est essentiel de hiérarchiser les actions en fonction du type de sous-population, même dans les zones urbaines.

Sequential interactions of Silver-silica nanocomposite (Ag-SiO2NC) with cell wall, metabolism and genetic stability of Psedomonas aeruginosa, a multiple antibiotic resistant bacterium

The study was carried out to understand the effect of silver-silica nanocomposite (Ag-SiO2NC) on the cell wall integrity, metabolism and genetic stability of Pseudomonas aeruginosa, a multiple drugresistant bacterium. Bacterial sensitivity towards antibiotics and Ag-SiO2NC was studied using standard disc diffusion and death rate assay, respectively. The effect of Ag-SiO2NC on cell wall integrity was monitored using SDS assay and fatty acid profile analysis while the effect on metabolism and genetic stability was assayed microscopically, using CTC viability staining and comet assay, respectively. P. aeruginosa was found to be resistant to β-lactamase, glycopeptidase, sulfonamide, quinolones, nitrofurantoin and macrolides classes of antibiotics. Complete mortality of the bacterium was achieved with 80 μgml-1 concentration of Ag-SiO2NC. The cell wall integrity reduced with increasing time and reached a plateau of 70 % in 110 min. Changes were also noticed in the proportion of fatty acids after the treatment. Inside the cytoplasm, a complete inhibition of electron transport system was achieved with 100 μgml-1 Ag-SiO2NC, followed by DNA breakage. The study thus demonstrates that Ag-SiO2NC invades the cytoplasm of the multiple drug-resistant P. aeruginosa by impinging upon the cell wall integrity and kills the cells by interfering with electron transport chain and the genetic stability