The copolymerization of N-vinyl-2-pyrrolidone with 2-hydroxyethyl methacrylate

The bulk free radical copolymerization of 2-hydroxyethyl methacrylate (HEMA) with N-vinyl-2-pyrrolidone (VP) was carried out to low conversions at 50 degreesC, using benzoyl peroxide (BPO) as initiator. The compositions of the copolymers; were determined using C-13 NMR spectroscopy. The conversion of monomers to polymers was studied using FT-NIR spectroscopy in order to predict the extent of conversion of monomer to polymer. From model fits to the composition data, a statistical F-test revealed that die penultimate model describes die copolymerization better than die terminal model. Reactivity ratios were calculated by using a non-linear least squares analysis (NLLS) and r(H) = 8.18 and r(V) = 0.097 were found to be the best fit values of the reactivity ratios for the terminal model and r(HH) = 12.0, r(VH) = 2.20, r(VV) = 0.12 and r(HV) = 0.03 for the penultimate model. Predictions were made for changes in compositions as a function of conversion based upon the terminal and penultimate models.

Water sorption into poly[(2-hydroxyethyl methacrylate)-co-(1-vinyl-2-pyrrolidone]at 310 K

Poly(2-hydroxyethyl methacrylate) and copolymers of 2-hydroxyethyl methacrylate (HEMA) and 1-vinyl-2-pyrrolidone (VP) in the form of cylindrical samples (approximate to8mm x 20mm) have been prepared and the sorption of water into these cylinders has been studied by the mass-uptake methods and by magnetic-resonance imaging. The equilibrium water contents for the cylinders were found to vary systematically with the copolymer composition. Diffusion of water into the cylinders was found to follow Fickian behaviour for cylinders with high HEMA contents, with the diffusion coefficients obtained from mass-uptake studies dependent on the copolymer composition, varying from 1.7 x 10(-11) m(2) s(-1) for poly(HEMA) to 2.0 x 10(-11) m(2) s(-1) for poly(HEMA-co-VP) with a composition of 1:1. However, NMR-imaging studies showed that, while the profiles of the water diffusion fronts for cylinders with high HEMA contents were Fickian, that for the 1:1 copolymer was not and indicated that the mechanism was Case III. The polymers which were rich in VP were characterized by a water-sorption process which follows Case-III behaviour. (C) 2003 Society of Chemical Industry.

Radical formation on gamma-radiolysis of poly [(methacrylic acid)-co-acrylonitri

The radicals formed on gamma-radiolysis of a series of copolymers of methacrylic acid and acrylonitrile have been investigated by ESR spectroscopy. This series of copolymers spanned the full composition range and the study was carried out at 77 K and ambient temperature. The radicals formed in the copolymers at 77 and 303 K were found to be similar to those found in the two homopolymers, but in the intermediate composition range the presence of acrylonitrile propagation radicals was also detected. These radicals were not observed to be formed in significant quantities on the radiolysis of polyacrylonitrile. They are believed to result from a scission of the main chain at methacrylic acid/acrylonitrile diad sequences following loss of the methacrylic acid carboxyl group. At 77 K, the copolymers with high methacrylic acid contents were found to be more sensitive to radical formation than the methacrylic acid homopolymer, but this enhanced sensitivity was not evident at ambient temperature, where the G-values for radical formation for the copolymers were slightly less than the values for the homopolymers. (C) 2003 Society of Chemical Industry.

High energy radiation grafting of fluoropolymers

Fluoropolymers are known as chemically inert materials with good high temperature resistance, so they are often the materials of choice for harsh chemical environments. These properties arise because the carbon-fluorine bond is the strongest of all bonds between other elements and carbon, and, because of their large size, fluorine atoms can protect the carbon backbone of polymers such as poly(tetrafluoroethylene), PTFE, from chemical attack. However, while the carbon-fluorine bond is much stronger than the carbon hydrogen bond, the G values for radical formation on high energy radiolysis of fluoropolymers are roughly comparable to those of their protonated counterparts. Thus, efficient high energy radiation grafting of fluoropolymers is practical, and this process can be used to modify either the surface or bulk properties of a fluoropolymer. Indeed, radiation grafted fluoropolymers are currently being used as separation membranes for fuel cells, hydrophilic filtration membranes and matrix substrate materials for use in combinatorial chemistry. Herein we present a review of recent studies of the high energy radiation grafting of fluoropolymers and of the analytical methods available to characterize the grafts. (C) 2003 Elsevier Ltd. All rights reserved.

Investigation of the vapor-phase grafting of styrene onto PFA

Poly(tetrafluoroethylene-co-perfluoropropyI vinyl ether), PFA, was grafted with styrene from the vapor phase using a simultaneous radiation grafting method. The graft yields were measured as a function of the dose and dose rate and were found to be initially linearly dependent on the dose and independent of the dose rate up to dose rates of similar to3 kGy/h. However, at a dose rate of 6.2 kGy/h, the slope of the yield-grafting time plot decreased. Raman depth profiles of the grafts showed that the polystyrene concentrations were greatest near the surface of the grafted samples and decreased with depth. The maximum penetration depth of the graft depended on the radiation dose for a fixed dose rate. Fmoc-Rink loading tests showed that the grafts displayed superior loading compared to grafts prepared from bulk styrene or from styrene solutions other than methanol.

Cross-linking of PFA by electron beam irradiation

The effect of electron beam radiation on a perfluoroalkoxy (PFA) resin was examined using solid-state high-speed magic angle spinning F-19 NMR spectroscopy and FT-IR spectroscopy. Samples were prepared for analysis by subjecting them to electron beam radiation in the dose range 0.5-2.0 MGy at 633 K, which is above the crystalline melting temperature. The new structures were identified and include new saturated chain ends, short and long branches, unsaturated groups, and cross-links. The radiation chemical yield (G value) of new long branch points was greater than the G value of new chain ends, suggesting that cross-linking is the net radiolytic process. This conclusion was supported by an observed decrease in the crystallinity and an increase in the optical clarity of the polymer.

Synthesis, structure, and optical properties of an alternating calix[4]arene-based meta-linked phenylene ethynylene copolymer

Novel alternating copolymers comprising biscalix[4]arene-p-phenylene ethynylene and m-phenylene ethynylene units (CALIX-m-PPE) were synthesized using the Sonogashira-Hagihara cross-coupling polymerization. Good isolated yields (60-80%) were achieved for the polymers that show M-n ranging from 1.4 x 10(4) to 5.1 x 10(4) gmol(-1) (gel permeation chromatography analysis), depending on specific polymerization conditions. The structural analysis of CALIX-m-PPE was performed by H-1, C-13, C-13-H-1 heteronuclear single quantum correlation (HSQC), C-13-H-1 heteronuclear multiple bond correlation (HMBC), correlation spectroscopy (COSY), and nuclear overhauser effect spectroscopy (NOESY) in addition to Fourier transform-Infrared spectroscopy and microanalysis allowing its full characterization. Depending on the reaction setup, variable amounts (16-45%) of diyne units were found in polymers although their photophysical properties are essentially the same. It is demonstrated that CALIX-m-PPE does not form ground-or excited-state interchain interactions owing to the highly crowded environment of the main-chain imparted by both calix[4]arene side units which behave as insulators inhibiting main-chain pi-pi staking. It was also found that the luminescent properties of CALIX-m-PPE are markedly different from those of an all-p-linked phenylene ethynylene copolymer (CALIX-p-PPE) previously reported. The unexpected appearance of a low-energy emission band at 426 nm, in addition to the locally excited-state emission (365 nm), together with a quite low fluorescence quantum yield (Phi = 0.02) and a double-exponential decay dynamics led to the formulation of an intramolecular exciplex as the new emissive species.

Demixing instability in coil-rod blends undergoing polycondensation reactions

The authors extend their earlier work on the stability of a reacting binary polymer blend with respect to demixing [D. J. Read, Macromolecules 31, 899 (1998); P. I. C. Teixeira , Macromolecules 33, 387 (2000)] to the case where one of the polymers is rod-like and may order nematically. As before, the authors combine the random phase approximation for the free energy with a Markov chain model for the chemistry to obtain the spinodal as a function of the relevant degrees of reaction. These are then calculated by assuming a simple second-order chemical kinetics. Results are presented, for linear systems, which illustrate the effects of varying the proportion of coils and rods, their relative sizes, and the strength of the nematic interaction between the rods. (c) 2007 American Institute of Physics.

Terapêuticas antigénio-especificas no tratamento das doenças desmielinizantes: estudos sobre a vacinação com ADN e a descoberta de um novo alvo antigénico

RESUMO A Esclerose Múltipla (EM) é uma doença desmielinizante crónica do Sistema Nervoso Central (SNC), provocada, em grande parte, por um ataque imuno-mediado contra diversos elementos da bainha de mielina. Dentro dos alvos antigénicos desta resposta autoimune, vários componentes proteicos e lipídicos da mielina têm vindo a ser identificados ao longo dos anos, entre os quais se destacam a proteína básica de mielina(MBP), glicoproteína ligodendrocitária da mielina (MOG), proteína proteolipídica (PLP) e glicoproteína associada à mielina (MAG). Com o desenvolvimento do modelo animal de Encefalomielite Autoimune Experimental (EAE), diversas terapias antigénio-específicas foram desenhadas, baseadas na modificação benéfica da resposta autoimune contra a mielina, tais como a administração de mielina ou seus componentes, os copolímeros terapêuticos, os ligandos peptídeos alterados e, recentemente, a vacinação com ácido desoxirribonucleico (ADN) codificador de proteínas de mielina, integrado em plasmídeos e purificado para administração parentérica. Neste trabalho, apresentamos os resultados de um extenso conjunto de experiências, subordinadas a dois temas fundamentais: 1) avaliação do potencial terapêutico, e dos mecanismos de acção, da vacinação tolerizadora com ADN codificador de proteínas de mielina (MBP, MOG, PLP, MAG) na EAE, e da associação desta vacinação com a administração de ADN de citocinas Th2, ou de oligonucleótidos imunomoduladores; 2) identificação e caracterização da resposta imune contra um novo componente da mielina com potencial antigénico, a proteína inibidora do recrescimento axonal, Nogo-A. No que respeita à vacinação com ADN, os nossos resultados comprovam a eficácia desta terapêutica antigénio-específica na prevenção e tratamento da EAE. Os seus mecanismos de acção incluem, entre outros, a supressão anérgica da proliferação antigénioespecífica dos linfócitos T anti-mielina (no modo de prevenção da doença), o enviesamento Th2 da resposta imune (quando co-administrada com a vacina de ADN codificadora da citocina IL-4, funcionando como terapia génica local), e a redução da diversificação de epítopos da resposta humoral anti-mielina, avaliada através de myelin spotted arrays. A associação das vacinas de ADN com oligonucleótidos imunomoduladores GpG, desenvolvidos para contrariar as sequências CpG imunoestimuladoras presentes no vector de vacinação, levou à melhoria da sua eficácia terapêutica, devida, provavelmente, ao efeito estimulador preferencial dos oligonucleótidos GpG sobre linfócitos Th2 e sobre células reguladoras NK-T. Com base nestes resultados a vacinação com ADN foi desenvolvida para o tratamento da EM em humanos, com ensaios clínicos a decorrerem neste momento. Em relação à proteína Nogo-A, estudos de estrutura primária e de previsão de antigenicidade identificaram a região Nogo-66 como alvo antigénico potencial para a EAE. Nas estirpes de ratinho SJL/J e C57BL/6, fomos capazes de induzir sinais clínicos e histológicos de EAE após imunização com os epítopos encefalitogénicos Nogo1-22, Nogo23- 44 e Nogo45-66, utilizando protocolos de quebra de tolerância imune. Ao mesmo tempo, identificámos e caracterizámos uma resposta linfocitária T específica contra os antigénios contidos na região Nogo-66, e uma resposta linfocitária B com diversificação intra e intermolecular a vários determinantes presentes noutras proteínas da mielina. A transferência adoptiva de linhas celulares Th2 anti-Nogo45-66, levou à melhoria clínica e histológica da EAE em animais recipientes induzidos com outros antigénios de mielina, após migração destas células para o SNC. Estes dados comprovam a importância da Nogo-66 como antigénio na EAE, e a eficácia de terapias antigénio-específicas nela baseadas. No seu conjunto, os nossos resultados confirmam o potencial terapêutico das vacinas de ADN codificadoras de proteínas de mielina, bem como a importância dos encefalitogénios contidos na proteína Nogo-A para a fisiopatologia da EAE e da EM, com eventual relevância para o desenvolvimento de novas terapias antigénio-específicas. O aperfeiçoamento futuro destas terapias poderá levar, eventualmente, a uma capacidade de manipulação da resposta imune que permita o tratamento eficaz das doenças inflamatórias desmielinizantes, como a Esclerose Múltipla. ABSTRACT Multiple Sclerosis (MS) is a chronic demyelinating disease of the Central Nervous System (CNS), caused, mainly, by an immune-mediated attack against several elements of the myelin sheath. Among the antigenic targets for this autoimmune response, several proteic and lipidic myelin components have been identified throughout the years, of which myelin basic protein (MBP), myelin oligodendrocyte glycoprotein (MOG), proteolipidic protein (PLP), and myelin associated glycoprotein (MAG) are the best characterized. With the development of the animal model for MS, Experimental Autoimmune Encephalomyelitis (EAE), several antigen-specific therapies have been designed, based on beneficial modifications of the autoimmune response against myelin. These have included myelin and myelin component administration, therapeutic copolymers, altered peptide ligands and, more recently, vaccination with myelin-protein encoding deoxyribonucleic acid (DNA), integrated into plasmids and purified for parenteral administration. In this work we present the results of an extensive series of experiments, subordinate to two fundamental areas: 1) evaluating the therapeutic potential, and mechanisms of action, of tolerizing myelin protein (MBP, MOG, PLP, MAG) DNA vaccination in EAE, alone and in association with Th2 cytokine DNA administration, or immunomodulatory oligonucleotides; 2) identifying and characterizing the immuneresponse against a new myelin component with antigenic potential, the axonal regrowth inhibitor Nogo-A. Regarding DNA vaccination, our results prove the efficacy of this antigen-specific therapy for the prevention and treatment of EAE. Its mechanisms of action include, among others, anergic suppression of antigen-specific T-cell proliferation against myelin (in prevention mode), Th2 biasing of the immune response (when co-administered with the IL- 4 codifying DNA vaccine, acting as local gene therapy), and reduction of epitope spreading of the anti-myelin antibody response, assessed by myelin spotted arrays. The combination of myelin DNA vaccination with the administration of GpG immunomodulatory oligonucleotides, designed to counteract immunostimulatory CpG motifs present in the vaccination vector, led to an improvement in therapeutic efficacy, probably due to the preferential stimulatory effect of GpG oligonucleotides on Th2 lymphocytes and on regulatory NK-T cells. Based on these results, tolerizing DNA vaccination is being developed for human use, with ongoing clinical trials. As concerns the Nogo-A protein, based on studies of primary structure and prediction of antigenicity, we identified the Nogo-66 region (responsible for the most of the inhibitory capacity of this protein) as a potential antigenic target for EAE. In the SJL/Jand C57BL/6 mouse strains, we were able to induce clinical and histological signs of EAE,after immunization with the encefalitogenic epitopes Nogo1-22, Nogo23-44 and Nogo45-66,using a tolerance breakdown protocol. Concomitantly, we identified and characterized a specific T cell response against these antigens, together with a B cell response which showed extensive intra and intermolecular epitope spread to several determinants present in other myelin proteins. Adoptive transfer of nti-Nogo45-66 Th2 cell lines resulted in clinical and histological improvement of EAE in recipient animals induced with other myelin antigens, after intraparenchymal CNS migration of anti-Nogo cells. These data confirm the relevance of Nogo-66 as an antigen in EAE, as well as the efficacy of antigenspecific therapies based on the response against this protein.In conclusion, our results substantiate the therapeutic potential of myelin-encoding DNA vaccination, as well as the importance of encefalitogenic epitopes present in the Nogo-A protein for the pathophysiology of EAE and MS, with potential relevance for the creation of new antigen specific-therapies. The future development of these therapies may eventually lead to a degree of manipulation of the immune response that allows the effective treatment of autoimmune, inflammatory, demyelinating diseases, such as Multiple Sclerosis.

Development of 2-oxazoline-based hydrogels and porous polyester microparticles in scCO2

Thesis submitted to Faculdade de Ciências e Tecnologia from Universidade Nova de Lisboa in partial fulfillment of the requirements for the obtention of the degree of Master of Science in Biotechnology

Effect of the degree of porosity on the performance of poly(vinylidene fluoride-trifluoroethylene)/poly(ethylene oxide) blend membranes for lithium-ion battery separators

Porous polymer membranes based on poly(vinylidene fluoride-trifluoroethylene)/poly(ethylene oxide) copolymers, P(VDF-TrFE)/PEO, are prepared through the, from partial to total, elimination of PEO, leading to interconnected micropores in the polymer blends. Electrolyte uptake, thermal and mechanical properties depend on the amount of PEO present in the polymer blend. Further, the degree of crystallinity of PEO and the elastic modulus (E´) of the polymer blend decrease with increasing PEO removal. Electrical properties of the polymer blend membranes are influenced by the porosity and are dominated by diffusion. The temperature dependence of ionic conductivity follows the Arrhenius behavior. It is the highest for the membranes with a volume fraction of pores of 44% (i.e, 90% PEO removal), reaching a value of 0.54 mS.cm-1 at room temperature. Battery performance was determined by assembling Li/C-LiFePO4 swagelok cells. The polymer blends with 90% PEO removal exhibit rate (124 mAhg-1 at C/5 and 47 mAhg-1 at 2C) and cycling capabilities suitable for lithium ion battery applications.

Mechanical vs. electrical hysteresis of carbon nanotube/styrene-butadiene-styrene composites and their influence in the electromechanical response

The interesting properties of thermoplastics elastomers can be combined with carbon nanotubes (CNT) for the development of large strain piezoresistive composites for sensor applications. Piezoresistive properties of the composites depend on CNT content, with the gauge factor increasing for concentrations around the percolation threshold, mechanical and electrical hysteresis. The SBS copolymer composition (butadiene/styrene ratio) influences the mechanical and electrical hysteresis of composites and, therefore, the piezoresistive response. This work reports on the electrical and mechanical response of CNT/SBS composites with 4%wt nanofiller content, due to the larger electromechanical response. C401 and C540 SBS copolymers with 80% and 60% butadiene content, respectively have been selected. The copolymer with larger amount of soft phase (C401) shows a rubber-like mechanical behavior, with mechanical hysteresis increasing linearly with strain until 100% strain. The copolymer with the larger amount of hard phase (C540) just shows rubber-like behavior for low strains. The piezoresistive sensibility is similar for both composites for low strains, with a GF≈ 5 for 5% strain. The electrical hysteresis shows opposite behavior than the mechanical hysteresis, increasing with strain for both composites, but with higher increase for softer copolymer, C401. The GF increases with increasing strain, but this increase is larger for composites with lower amounts of soft phase due to the distinct initial modulus and deformation of the soft and hard phases of the copolymer. The soft phase shows larger strain under a given stress than the harder phase and the conductive pathway rearrangements in the composites are different for both phases, the harder copolymer (C540) showing higher piezoresistive sensibility, GF≈ 18, for 20% strain.

Tomato response to a high light transmission greenhouse film

Increasing greenhouse light transmission has a positive effect not only in Northern latitudes but in Mediterranean countries as well. A greenhouse, H2, with a tetrafluoroethylene copolymer 60 microns film, (Asahi Glass company, Aflex) characterised by its high light transmission and durability was compared to another greenhouse with a co-extruded film considered as a control, H1. Tomato crop response to the increase in light during winter and summer with high temperature and light was evaluated. Light transmission in H2 remained very high in spite of the observed dust accumulation and the low angle of incidence of the winter solar radiation. Transmissivity was clearly higher for H2 (81 to 83 % throughout the season) than in the control (around 63 %). The rest of the climatic parameters were similar in both greenhouses, either in the winter or in the summer evaluations. In spite of the high solar radiation in H2, the summer temperature could be maintained at the desired levels by using evaporative cooling. Accumulated tomato yield and quality was better in the H2 greenhouse (15 % more for the winter crop and 27% more for the summer crop). Fruit size was bigger in the winter crop. As an overall conclusion, the use of high light transmissive films in Mediterranean areas is very convenient for many vegetable crops. This is valid not only in winter but in summer, provided the greenhouse has good ventilation or evaporative cooling to overcome the increase in sensible heat caused by this increase in light..

Desenvolupament d'hidrogels superficials que contenen motius d'adhesió cel·lular

Projecte de recerca elaborat a partir d’una estada al Departament d’Enginyeria Química del Massachusetts Institute of Technology entre abril i octubre del 2006. S’ha dissenyat i sintetitzat uns nous films polimèrics, amb aplicacions en l’àmbit de l’enginyeria de teixits, utilitzant la tècnica anomenada iCVD (initiated Chemical Vapor Deposition), prèviament desenvolupada pel grup receptor. Es tracta d’uns hidrogels superficials de gruix controlable, que incorporen un monòmer fluorat, el qual s’havia estudiat extensament en el grup d’origen. Aquest monòmer es caracteritza per reaccionar molt fàcilment amb pèptids, de manera que aquests queden units covalentment a la superfície. Diferents estratègies pel desenvolupament d’aquests copolímers han estat avaluades, tant des del punt de vista purament sintètic com de la pròpia aplicació. Les condicions de polimerització han estat optimitzades i els hidrogels s’han caracteritzat químicament per tècniques espectroscòpiques (FTIR, XPS), i físicament per angle de contacte i el·lipsometria. D’aquesta manera, s’ha estudiat la capacitat dels hidrogels d’absorbir aigua i alhora augmentar el seu gruix, depenent de la quantitat d’agent reticulant introduït i de la incorporació del nou monòmer. A continuació, s’han optimitzat les condicions de reacció d’aquestes superfícies amb pèptids que incorporen una molècula fluorescent, la qual permet detectar fàcilment per microscòpia de fluorescència si la reacció ha tingut lloc. Una vegada la plataforma ha estat posada a punt, s’han iniciat assajos cel·lulars tant amb fibroblasts embriònics de ratolí com amb cèl·lules humanes umbilicals. Els resultats preliminars suggereixen una morfologia diferent de les cèl·lules segons si es cultiven sobre films modificats amb pèptids que promouen l’adhesió cel·lular o sobre les seves seqüències permutades no actives. Però, el més interessant és que també s’han observat certes diferències depenent si els films contenen el component hidrogel o no, fet que suggeriria un paper actiu d’aquests noves superfícies en el comportament cel·lular.

Pathways for the synthesis of polyesters in plants; cutin, suberin, and polyhydroxyalkanoates

Plants naturally produce the lipid-derived polyester cutin, which is found in the plant cuticle that is deposited at the outermost extracellular matrix of the epidermis covering nearly all aboveground tissues. Being at the interface between the cell and the external environment, cutin and the cuticle play important roles in the protection of plants from several stresses. A number of enzymes involved in the synthesis of cutin monomers have recently been identified, including several P450s and one acyl-CoA synthetase, thus representing the first steps toward the understanding of polyester formation and, potentially, polyester engineering to improve the tolerance of plants to stresses, such as drought, and for industrial applications. However, numerous processes underlying cutin synthesis, such as a controlled polymerization, still remain elusive. Suberin is a second polyester found in the extracellular matrix, most often synthesized in root tissues and during secondary growth. Similar to cutin, the function of suberin is to seal off the respective tissue to inhibit water loss and contribute to resistance to pathogen attack. Being the main constituent of cork, suberin is a plant polyester that has already been industrially exploited. Genetic engineering may be worth exploring in order to change the polyester properties for either different applications or to increase cork production in other species. Polyhydroxyalkanoates (PHAs) are attractive polyesters of 3-hydroxyacids because of their properties as bioplastics and elastomers. Although PHAs are naturally found in a wide variety of bacteria, biotechnology has aimed at producing these polymers in plants as a source of cheap and renewable biodegradable plastics. Synthesis of PHA containing various monomers has been demonstrated in the cytosol, plastids, and peroxisomes of plants. Several biochemical pathways have been modified in order to achieve this, including the isoprenoid pathway, the fatty acid biosynthetic pathway, and the fatty acid β-oxidation pathway. PHA synthesis has been demonstrated in a number of plants, including monocots and dicots, and up to 40% PHA per gram dry weight has been demonstrated in Arabidopsis thaliana. Despite some successes, production of PHA in crop plants remains a challenging project. PHA synthesis at high level in vegetative tissues, such as leaves, is associated with chlorosis and reduced growth. The challenge for the future is to succeed in synthesis of PHA copolymers with a narrow range of monomer compositions, at levels that do not compromise plant productivity. This goal will undoubtedly require a deeper understanding of plant biochemical pathways and how carbon fluxes through these pathways can be manipulated, areas where plant "omics" can bring very valuable contributions.