Estrutura do dossel e acúmulo de forragem dos capins piatã e marandu sob pastejo com ovinos

The objective of this scientific work was to evaluate the tillering and mass production of Brachiaria brizantha Piatã and Marandu grasses with two statures of post-grazing. The experimental lineation was in factorial arrangement (2 pastures x 2 residue stature) with subplots (grazing cycle). The experimental period was from March to October of 2012. The target stature on pre-grazing was 50 cm and on post-grazing 15 and 25 for each cultivar. The following variables were analyzed: tiller population density, forage mass, morphological components, accumulation and accumulation rate. Three grazing cycles were obtained. Marandu grass presented larger forage mass on pre-grazing and lower stem production than piatã grass. No difference was observed between the two cultivars regarding the leaf blade production. There was no difference on forage mass, leaf blade, stem, and dead material production between the two statures of post-grazing. The pastures managed at 25 cm presented accumulation rate compared to those with 15 cm. Concerning the accumulation rate on the two cultivars, piatã and marandu grasses, Marandu grass presented higher amount than the piatã grass, and also presented higher values on the rate of basal tiller appearing on 15 cm stature post-pasture feature. Piatã grass managed at 25 cm developed smaller tiller amount on the second generation and greater tiller amount on the third generation than marandu grass. The greater tiller population density was observed on 25cm post-grazing pastures. There was no statistical difference of density between the two cultivars and between the cycles. Accordingly, it is concluded that piatã and marandu cultivars can be managed with 15cm and 25 cm post-grazing statures

Copper Hexacyanoferrate Formation on the Modified Silica Surface with DAB-Am-16 Dendrimer

The third generation (G-3) polypropylenimine hexadecaamine dendrimer (DAB-Am-16) was grafted onto the silica gel surface. The modified silica interacts easily with Cu(2+) and then with potassium ferrocyanide to form copper hexacyanoferrate. The modified silica was characterized by the following techniques: Nuclear Magnetic Resonance (NMR), FTIR spectroscopy, Energy Dispersive X-ray (EDX) and Cyclic Voltammetry. The modified silica containing copper hexacyanoferrate (CuHCFSD) was tested for a voltammetric determination of nitrite using a modified graphite paste electrode.

Investigation about the copper adsorption on the chloropropylsilica gel surface modified with a nanostructured dendrimer DAB-Am-16: an analytical application for determination of copper in different samples

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of Different Light-Curing Modes on Degree of Conversion, Staining Susceptibility and Stain's Retention Using Different Beverages in a Nanofilled Composite Resin

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Degree of conversion of nanofilled and microhybrid composite resins photo-activated by different generations of LEDs

Objective: This study aimed at evaluating the degree of conversion (DC) of four composite resins, being one nanofilled and 3 microhybrid resins, photo-activated with second- and third-generation light-emitting diodes (LEDs). Material and methods: Filtek (TM) Z350 nanofilled composite resins and Amelogen (R) Plus, Vit-l-escence (TM) and Opallis microhybrid resins were photo-activated with two second-generation LEDs (Radii-cal and Elipar Free Light (TM) 2) and one third-generation LED (Ultra-Lume LED 5) by continuous light mode, and a quartz halogen-tungsten bulb (QHT, control). After 24 h of storage, the samples were pulverized into fine powder and 5 mg of each material were mixed with 100 mg of potassium bromide (KBr). After homogenization, they were pressed, which resulted in a pellet that was evaluated using an infrared spectromer (Nexus 470, Thermo Nicolet) equipped with TGS detector using diffuse reflectance (32 scans, resolution of 4 cm(-1)) coupled to a computer. The percentage of unreacted carbon-carbon double bonds (% C=C) was determined from the ratio of absorbance intensities of aliphatic C=C (peak at 1637 cm-1) against internal standard before and after curing of the specimen: aromatic C-C (peak at 1610 cm-1). Results: The ANOVA showed a significant effect on the interaction between the light-curing units (LCUs) and the composite resins (p<0.001). The Tukey's test showed that the nanofilled resin (Filtek (TM) Z350) and Opallis when photo-activated by the halogen lamp (QTH) had the lowest DC compared with the other microhybrid composite resins. The DC of the nanofilled resin (Filtek (TM) Z350) was also lower using LEDs. The highest degrees of conversion were obtained using the third-generation LED and one of second-generation LEDs (Elipar Free Light (TM) 2). Conclusions: The nanofilled resin showed the lowest DC, and the Vit-l-escence (TM) microhybrid composite resin showed the highest DC. Among the LCUs, it was not possible to establish an order, even though the second-generation LED Radii-cal provided the lowest DC.

Using b-tagging to enhance the supersymmetry reach of the CERN Large Hadron Collider

Assuming that supersymmetry is realized with parameters in the hyperbolic branch/focus point region of the minimal supergravity model, we show that by searching for multijet+E-T(miss) events with tagged b jets the reach of experiments at the LHC may be extended by as much as 20% from current projections. The reason for this is that gluino decays to third generation quarks are enhanced because the lightest neutralino has substantial Higgsino components. Although we were motivated to perform this analysis because the hyperbolic branch/focus point region is compatible with the recent determination of the relic density of cold dark matter, our considerations may well have a wider applicability since decays of gluinos to third generation quarks are favored in a wide variety of models.

Four-fermion contact interactions at one-loop and the new atomic parity violation results.

We investigate the possibility that four-fermion contact interactions give rise to the observed deviation from the Standard Model prediction for the weak charge of cesium, through one-loop contributions. We show that the presence of loops involving the third generation quarks can explain such deviation.

Heavy-flavor tagging and the supersymmetry reach of the CERN Large Hadron Collider

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Search for W' -> tb resonances with left- and right-handed couplings to fermions D0 Collaboration

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Search for W ' boson resonances decaying to a top quark and a bottom quark

We search for the production of a heavy W ' gauge boson that decays to third generation quarks in 0: 9 fb(-1) of p (p) over bar collisions at root s = 1: 96 TeV, collected with the D0 detector at the Fermilab Tevatron collider. We find no significant excess in the final-state invariant mass distribution and set upper limits on the production cross section times branching fraction. For a left-handed W ' boson with SM couplings, we set a lower mass limit of 731 GeV. For right-handed W ' bosons, we set lower mass limits of 739 GeV if the W ' boson decays to both leptons and quarks and 768 GeV if the W ' boson decays only to quarks. We also set limits on the coupling of the W ' boson to fermions as a function of its mass.

Anomaly-free constraints in neutrino seesaw models

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Extending SUSY reach at the CERN large hadron collider using b-tagging

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Atividade antimicrobiana in vitro da cefpiroma em comparação com outros beta-lactâmicos de amplo espectro contra 804 amostras clínicas de nove hospitais brasileiros

OBJETIVO: Avaliar a atividade in vitro da cefalosporina de quarta geração, cefpiroma em comparação com ceftazidima, ceftriaxona, cefotaxima e imipenem em um estudo multicêntrico envolvendo nove hospitais de seis cidades em quatro estados. MATERIAL E MÉTODOS: Foram estudadas 804 amostras clínicas isoladas em pacientes internados em unidades de terapia intensiva ou unidades de oncohematologia. As amostras foram coletadas no período de junho a novembro de 1995, isto é, antes da cefpiroma estar disponível comercialmente no Brasil, e testadas através do método de microdiluição em placas conforme descrito pelo National Committee for Clinical Laboratory Standards (NCCLS). Todas as amostras resistentes à cefpiroma foram retestadas utilizando-se o E-test. RESULTADOS: Contra as amostras de enterobactérias (n= 344), a cefpiroma apresentou atividade de 2 a 32 vezes superior àquela apresentada pelas cefalosporinas de terceira geração (CTGs) e semelhante àquela apresentada pelo imipenem. As porcentagens de enterobactérias sensíveis foram: 88% para a cefpiroma, 69% para as CTGs e 96% para o imipenem. O espectro de ação da cefpiroma foi maior ou igual ao do imipenem contra as espécies Citrobacter freundii, E. aerogenes, Morganella morganii e Serratia marcescens. Contra Acinetobacter sp. (n=77), a cefpiroma foi ligeiramente mais ativa que a ceftazidima, porém as porcentagens de resistência foram muito altas para esses compostos (84% e 88% respectivamente). As atividades da cefpiroma, ceftazidima e imipenem foram semelhantes contra Pseudomonas aeruginosa (n=128), com MIC50/porcentagem de sensibilidade de 8/59%, 8/62% e 4/62% respectivamente. Contra bactérias aeróbias gram-positivas, a cefpiroma foi de 4 a 16 vezes mais ativa que as CTGs. Contra S. epidermidis e outras espécies de estafilococos coagulase-negativos a cefpiroma foi ligeiramente superior ao imipenem, porém, contra as outras espécies de bactérias gram-positivas avaliadas, o imipenem apresentou atividade um pouco superior. CONCLUSÃO: Os resultados desse estudo sugerem que, no Brasil, a cefpiroma apresenta espectro de ação superior ao das CTGs contra bactérias gram-negativas (Enterobacteriaceae e não-fermentadares) e gram-positivas e semelhante ao do imipenem contra algumas espécies de enterobactérias e contra P. aeruginosa.

Sea waves generated by extratropical cyclones in the South Atlantic Ocean: Hindcast and validation against altimeter data

This work presents analyses of the atmospheric conditions and the hindcast of the surface wave field when six extratropical cyclones formed and displaced over the South Atlantic Ocean (10degreesN, 60degreesS; 75degreesW, 15degreesE) between April and September 1999. These events caused high sea waves associated with hazardous conditions along the south and southeast coast of Brazil. The meteorological composite fields for these cyclones show a strong near-surface wind velocity (up to 14 m s(-1)) during its mature phase. The sea-state wave hindcast was obtained using a third-generation wave model forced by the 10-m above ground level wind field from the National Centers for Environmental Prediction-National Center for Atmospheric Research reanalysis dataset. Closer to the south and southeast Brazilian coast, the hindcast results showed significant wave heights of up to 5 m in some of the events. The wave hindcast results for the significant wave height were compared against satellite altimeter data at 6 h intervals. The statistical index showed a systematic underestimation of the significant wave height by 0.5 m. The correlation between wave hindcast and altimeter measurements was greater than 90%, showing a good phase reproduction by the wave model.

LC-DAD Determination of Fleroxacin in Bulk and Pharmaceutical Dosage Forms

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)