Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.

Gestão compartilhada de P&D em petróleo:a interação entre a Petrobrás e a Universidade Federal do Rio Grande do Norte

This work addresses the relationship between University-Firm aims to understand the model of shared management of R&D in petroleum of Petrobras with UFRN. This is a case study which sought to investigate whether the model of cooperation established by the two institutions brings innovation to generate technical-scientific knowledge and contribute to the coordination with other actors in the promotion of technological innovation. In addition to desk research the necessary data for analysis were obtained by sending questionnaires to the coordinators of projects in R&D at the company and university. Also, interviews were conducted with subjects who participated in the study since its inception to the present day. This case study were analysed through the Resource-Based View and Interorganizational Networks theory. The sample data also stands that: searches were aligned to the strategic planning and that 29% of R&D projects have been successful on the scope of the proposed objectives (of which 11% were incorporated into business processes); which was produced technical and scientific knowledge caracterized by hundreds of national and international publications; thesis, dissertations, eleven patents, and radical and incremental innovations; the partnership has also brought benefits to the academic processes induced by the improved infrastructure UFRN and changing the "attitude" of the university (currently with national prominence in research and staff training for the oil sector). As for the model, the technical point of view, although it has some problems, it follows that it is appropriate. From the viewpoint of the management model is criticized for containing an excess of bureaucracy. From the standpoint of strategic allocation of resources from the legal framework needs to be reassessed, because it is focused only on the college level and it is understood that should also reach the high school given the new reality of the oil sector in Brazil. For this it is desirable to add the local government to this partnership. The set of information leads to the conclusion that the model is identified and named as a innovation of organizational arrangement here known as Shared Management of R&D in petroleum of Petrobras with UFRN. It is said that the shared management model it is possible to exist, which is a simple and effective way to manage partnerships between firms and Science and Technology Institutions. It was created by contingencies arising from regulatory stand points and resource dependence. The partnership is the result of a process of Convergence, Construction and Evaluation supported by the tripod Simplicity, Systematization and Continuity, important factors for its consolidation. In practice an organizational arrangement was built to manage innovative university-industry partnership that is defined by a dyadic relationship on two levels (institutional and technical, therefore governance is hybrid), by measuring the quarterly meetings of systematic and standardized financial contribution proportional to the advancement of research. These details have led to the establishment of a point of interaction between the scientific and technological-business dimension, demystifying they are two worlds apart

Inovações tecnológicas na caprinocultura

O largo crescimento do setor de agronegócios no Brasil tem estimulado mudanças nos sistemas produtivos, tanto na intensificação, como na profissionalização da produção. Dessa forma, os produtores têm buscado estratégias para melhor atender aos desafios da atividade pecuária atual, dentre as quais se destacam as inovações tecnológicas que devem resultar em comprovado benefício à atividade, seja pelo aumento em produtividade, seja pela melhoria na qualidade dos produtos, seja pela conscientização do respeito ao meio ambiente. Assim como em outros segmentos do agronegócio brasileiro, na caprinocultura existe uma demanda crescente pela aplicação de inovações tecnológicas, uma vez que o sistema produtivo precisa ser mais competitivo para se manter no mercado. Dentre as inovações tecnológicas aplicadas na caprinocultura, foram abordadas as mais relevantes nas áreas de reprodução (desde métodos para indução de cio até a prática da transgenia), melhoramento genético (biogenética), sanidade (inovações no diagnóstico e prevenção de doenças de maior impacto na criação), nutrição (inovações nos sistemas de alimentação) e tratamento de dejetos (diminuição de contaminantes no ambiente). A utilização conjunta das inovações tecnológicas nos diferentes segmentos associados à cadeia produtiva caprina pode fazer com que ocorram melhorias nos rebanhos assim como nos produtos gerados.

A gestão do conhecimento e a inovação tecnológica como fatores de sobrevivência e de competitividade na sociedade do conhecimento: uma análise exploratória das MPEs do Rio Grande do Norte

The study examines the process of Knowledge Management and Technological Innovation in Small and Micro Enterprises (SME) in Rio Grande do Norte, Brazil, and proposes actions that can contribute to regional development and competitiveness of SME. Presents as technological innovation can help to make the SME entrepreneurial activities with innovative and competitive. Defines the phases and activities of the construction of knowledge in small organizations. Examines the process of Innovation, Research and Development (R & D) in SME. Identifies the use of knowledge management and technological innovation in management practices and social interaction to influence the competitiveness of SME. Covers the communities of practice as a diffuser of knowledge and learning. To obtain the data were used questionnaires with closed questions with multiple choice, direct observations and interviews with companies. The questionnaires and interviews covered the topics of Innovation, Knowledge Management and Competitive Intelligence on SME. The sample consisted of a total of 13 Small and Micro Enterprises Award winning MPE Brazil Competitiveness, sponsored by SEBRAE in the State of Rio Grande do Norte. The assessment questionnaires dealing with the Knowledge Management (KM Diagnostics - Model Bukowitz and Williams, 2002) and the process of Technological Innovation (Adaptation of ANPEI - National Association for Research, Development and Engineering of Innovative Companies). With the analysis, we concluded that the SME perceive knowledge management, but not formalized management practices so as to facilitate the dissemination of information. Soon, these companies need additional supports to direct them to the innovative activities that generate added value and competitiveness in the market

Avaliação dos processos de seleção utilizados nos programas de fomento a inovação nas micro e pequenas empresas da fundação de amparo à pesquisa do Rio Grande do Norte

Technological innovation promotes the generation of economic value by creating a new product, process or organizational management model, being classified as dynamic and multidimensional. Government intervention has the role of acting through government grant programs to foster the integration of innovative processes in small companies, due to the high costs and risks of development, strengthening the country`s economy in this phase. The distribution of this grant is determined by criteria, based especially in subjective judgments, which are based on the beliefs and perceptions about the technological opportunities and market actors involved in the process, being very difficult to measure the probability of success of the project under evaluation. This study aims to identify the most relevant selection criteria that must be inserted in grants programs at Rio Grande do Norte executed by Fundação de Pesquisa do Rio Grande do Norte (FAPERN). Initially, there was a systematization of 18 countries, covering 41 programs in foreign countries and 29 in Brazil. Based on the data collected, we conducted one survey containing four programs of FAPERN (INOVA I, INOVA II , INOVA III and INOVA IV), covering 44 companies and analyzing their responses according to the Likert scale , obtaining the degree of importance given by the respondent to each of the criteria in the questionnaire . As a result, drew up a proposal for new criteria to be used in the next FAPERN´s grants, containing 13 new criteria. It is expected, therefore, to contribute to a better spending of public funds invested in companies subsidized in Brazil

Avaliação da interação universidade - empresas - governo no desenvolvimento de projetos inovadores no RN por micro e pequenas empresas

Knowledge and innovation were seen as major forces, both for survival, as the acquisition of competitive advantages in the Brazilian economy, as well as adding value to the product as a market differentiator. The Triple Helix model is directed toward the knowledge-based economy. Over the past six years, the Federal Government through the Financier of Studies and Projects ( FINEP ) invested in technological innovation projects, economic subsidies, about U.S. $ 1 billion supporting more than 800 projects with these resources. According to the MCTI , the Northeast, over the years 2000 to 2010 increased spending on Science and Technology (considering the activities of research and development more scientific and related activities) of the State Government in relation to its total revenue In 2000, 0.51% of total revenues were invested in Science & Technology, while in 2010 this figure increased to 1.31%. Among the nine Northeast states, Paraíba is highlighted. In 2000, 0.33% of its total revenues were directed to innovation, reaching 2.04% in 2010, the largest increase in the region while the RN invested 0.24% in 2000 and in 2010 reached the level of 1.42 %. According to IBGE, in the period 2000-2011, the micro and small enterprises surpassed the barrier of 6 million establishments. In 2000, there were 4.2 million establishments while in 2011 were 6.3 million active establishments. Therefore, throughout the period, there was a creation of approximately 2.1 million new establishments. Between 2000 and 2011, micro and small businesses have created 7.0 million formal jobs, 8.6 million jobs in 2000 to 15.6 million in 2011. This scenario shows the importance of this study in relation to the investment of governments in RD & I in micro and small enterprises. This study aims to analyze the interaction Universities - Business - Government in the development of innovation in micro and small companies in Rio Grande do Norte participants of the edicts of Inova FAPERN. We chose to adopt as a research method case study concerning the procedure of the research, exploratory, descriptive, and on documents with engineers and researchers of innovation projects approved by PAPPE Subsidy (Inova -RN I, II and III). Data collection was done through the report made by FAPERN entitled: " Evaluation of companies financed and supported by the Grant Program for Technological Innovation for Micro and Small Enterprises RN - INOVA -RN " (2010) and a questionnaire with 40 closed questions and 1 opened to 30 affirmative composed based on a 5-point Likert scale. The analysis of data was qualitative and quantitative. The study provided to identify the importance and barriers arising from the relation between Government Enterprise (micro and small) and University as essential to the economic development of the region. It was also identified that, in the innovation projects, 70% of the goods or services originating from research were to market these, 50% resulted in a patent for the company and 80% publications of scientific articles

Uma análise de aspectos relacionados ao desenvolvimento e adoção de Enterprise Resources Planning livre de código aberto

Sistemas Integrados de Gestão ou Enterprise Resources Planning - ERP possibilitam o processamento das informações necessárias em uma empresa usando um único banco de dados. Muito tem se escrito sobre este tipo de software, abordando questões como o alto custo da aquisição de licenças, e a dependência de consultoria para a sua adaptação e implantação nas empresas. Atualmente vem crescendo o desenvolvimento e uso de ERP Livre de Código Aberto (FOS-ERP). Porém verifica-se que este tipo de sistema ainda não é suficientemente explorado, mesmo no meio acadêmico. Este artigo relata alguns trabalhos publicados sobre o assunto e levanta questões que devem ser tratadas por pesquisadores e demais interessados para adequar e viabilizar o uso desses sistemas conforme a realidade nacional. Assim, após uma introdução ao tema, são apresentadas algumas diferenças entre o FOS-ERP e seus equivalentes proprietários (Proprietary ERP ou P-ERP) em termos de modelos de negócios, seleção, customização e evolução. em seguida são elencados alguns desafios e oportunidades que o FOS-ERP pode oferecer a usuários, fornecedores, pesquisadores e colaboradores individuais. Concluindo, este artigo busca ampliar a discussão sobre FOS-ERP, destacando fatores tais como seu potencial de inovação tecnológica e estratégias de negócios.

A motivação e o significado do trabalho de bancários: estudo comparativo entre dois momentos do processo de reestruturação produtiva

This master s dissertation deals with motivation and the meaning of work amongst bank employees. This is done considering a cognitive perception. Work is understood here under a social and subjective comprehension, once it deals with significance attribution. Motivation is the process that rules choice of the different possibilities of individual behavior, all of which according to the Expectation Theory. This study aims to analyze the implications of the productive restructure, since it is related to technological innovation, organizational changes and management, in motivation and work significance. Thus, the objective of the research is to verify motivational differences and the meaning of work amongst bank employees. This is done in two distinct moments of the productive restructure of bank employees in Natal-RN. The research is divided in two parts. In the first one, changes that occurred in banks between 1999 until 2005 were identified by the means of interviews with 7 bank managers. The analyzed perspective was training intensifying, quality emphasis of customer attendance, the use of automation/technology, staff stabilization, change in staff profile, work intensification, etc. In the second study the Inventory of Motivation and Work Meaning was applied. Thus, questions related to work focus, social demographic data, in 187 bank employees were dealt with. The collected data was compared to data from previous work. It was observed that productive restructure has a reflection in the meaning of work increasing self-expression, economical reward, and responsibility in work conditions. All of the item mention beforehand maintain the level of inhumanness and consummation and respond as being the characteristics of the real work environment. On the other hand, bank employees value less justice, self-expression and more the survival perspective, implying instrumental values to work. As for motivation, it is increased among bank employees. These employees have greater expectations that their work produce results since they believe in their interference in work results

Biodiversidade: fonte potencial para a descoberta de fármacos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A política empresarial: a responsabilidade social como mecanismo de segurança

Neste ensaio, tomamos como problema as ações da política empresarial no Brasil, em específico a política de responsabilidade social das empresas, por entender que existe nessa iniciativa um status de inovação tecnológica que precisa ser interrogado, pois se inscreve no interior de uma racionalidade que objetiva o governo das populações e tem como instrumento técnico, para realizar esse fim, uma sociedade controlada por mecanismos de segurança. Para tanto, partimos da análise de três procedimentos efetivados por alguns projetos sociais desenvolvidos por empresas brasileiras - a pesquisa científica, o protagonismo juvenil e a metodologia participativa. A referência de análise são textos de diversas naturezas, veiculados por esses projetos e disponíveis ao acesso público.

Inovação tecnológica na indústria automobilística: características e evolução recente

O objetivo principal deste artigo é analisar as características básicas da evolução recente do processo de inovação tecnológica na indústria automobilística. A hipótese de trabalho é que estariam ocorrendo mudanças na intensidade do processo de inovação técnica nessa indústria. O ponto de partida é a observação de que, nos últimos anos, tem havido na indústria automotiva - provavelmente em decorrência da intensificação da concorrência setorial e de uma maior oportunidade tecnológica - tanto uma ampliação dos gastos em P&D quanto uma crescente incorporação da microeletrônica (nos produtos e nos processos produtivos). Finalmente, são feitas também algumas considerações procurando relacionar os resultados obtidos neste artigo com a discussão do processo de de-maturity (rejuvenescimento) industrial, proposto por Abernathy e outros autores.

Empresas multinacionais e desempenho comercial do Brasil: uma revisão da literatura

Fazemos uma releitura dos estudos empíricos sobre empresas multinacionais (EMNs) e comércio exterior no Brasil a partir dos modelos teóricos e empíricos de comércio internacional com firmas multinacionais. Percebe-se que aqueles estudos não examinam como características econômicas do país (Brasil) condicionaram a emergência e tipo das EMNs e, assim, seus respectivos impactos sobre comércio exterior. Conseguem isolar, nas análises de impacto comercial, evidências dos serviços tecnológicos das estrangeiras, relativamente às domésticas do mesmo setor, mas não examinam se essas firmas se concentraram ou não em atividades com vantagens comparativas no país, o que seria crucial para determinar seu impacto comercial comparativo.

Latin America and the Caribbean in the World Economy 2005-2006

Includes bibliography

Sustainable development: changing production patterns, social equity and the environment

Includes bibliography

América Latina y el Caribe: la propiedad intelectual después de los tratados de libre comercio

Incluye Bibliografía