Database of the GLAMAP project

A uniform chronology for foraminifera-based sea surface temperature records has been established in more than 120 sediment cores obtained from the equatorial and eastern Atlantic up to the Arctic Ocean. The chronostratigraphy of the last 30,000 years is mainly based on published d18O records and 14C ages from accelerator mass spectrometry, converted into calendar-year ages. The high-precision age control provides the database necessary for the uniform reconstruction of the climate interval of the Last Glacial Maximum within the GLAMAP-2000 project.

Long-finned pilot whale population diversity and structure in Atlantic waters assessed through biogeochemical and genetic markers

Acknowledgements. Cetacean samples were collected under the auspices of stranding monitoring programs run by the Sociedade Portuguesa de Vida Selvagem, the Coordinadora para o Estudio dos Mamíferos Mariños (supported by the regional government Xunta de Galicia), the UK Cetacean Strandings Investigation Programme and the Scottish Agriculture College Veterinary Science Division (jointly funded by Defra and the Devolved Governments of Scotland and Wales), the Marine Mammals Research Group of the Institute of Marine Research (Norway), the Museum of Natural History of the Faroe Islands and the International Fund for Animal Welfare Marine Mammal Rescue and Research Program (USA). The authors thank all the members of these institutions and organizations for their assistance with data and sample collection. S.S.M., P.M.F. and M.F. were supported by PhD grants from the Fundação para a Ciência e Tecnologia (POPH/FSE ref SFRH/BD/ 38735/ 2007, SFRH/BD/36766/2007 and SFRH/BD/30240/ 2006, respectively). A.L. was supported by a postdoctoral grant from the Fundação para a Ciência e Tecnologia (ref SFRH/BPD/82407/2011). The work related to strandings and tissue collection in Portugal was partially supported by the SafeSea project EEAGrants PT 0039 (supported by Iceland, Liechtenstein and Norway through the EEA Financial Mechanism), the MarPro project Life09 NAT/PT/000038 (funded by the European Union program LIFE+) and the project CetSenti FCT RECI/AAG-GLO/0470/2012 (FCOMP- 01-0124-FEDER-027472) (funded by the program COMPETE and the Fundação para a Ciência e Tecnologia). G.J.P. thanks the University of Aveiro and Caixa Geral de Depósitos (Portugal) for financial support. The authors acknowledge the assistance of the chemical analysts at Marine Scotland Science with the fatty acid analysis.

The trophic structure of Spongosorites coralliophaga-coral rubble communities at two northeast Atlantic cold water coral reefs

Funding for the JC073 cruise was provided by the Natural Environment Research Council (NERC) UK Ocean Acidification (UKOA) research programme’s Benthic Consortium project (NE/H017305/1 to J Murray Roberts). Funding for analytical costs and field work was provided by the Marine Alliance for Science and Technology Scotland (MASTS) (Biodiversity Grant to Ursula FM Witte, 140 SF10003-10). Georgios Kazanidis was funded by a MASTS PhD scholarship.

Long-finned pilot whale population diversity and structure in Atlantic waters assessed through biogeochemical and genetic markers

Acknowledgements. Cetacean samples were collected under the auspices of stranding monitoring programs run by the Sociedade Portuguesa de Vida Selvagem, the Coordinadora para o Estudio dos Mamíferos Mariños (supported by the regional government Xunta de Galicia), the UK Cetacean Strandings Investigation Programme and the Scottish Agriculture College Veterinary Science Division (jointly funded by Defra and the Devolved Governments of Scotland and Wales), the Marine Mammals Research Group of the Institute of Marine Research (Norway), the Museum of Natural History of the Faroe Islands and the International Fund for Animal Welfare Marine Mammal Rescue and Research Program (USA). The authors thank all the members of these institutions and organizations for their assistance with data and sample collection. S.S.M., P.M.F. and M.F. were supported by PhD grants from the Fundação para a Ciência e Tecnologia (POPH/FSE ref SFRH/BD/ 38735/ 2007, SFRH/BD/36766/2007 and SFRH/BD/30240/ 2006, respectively). A.L. was supported by a postdoctoral grant from the Fundação para a Ciência e Tecnologia (ref SFRH/BPD/82407/2011). The work related to strandings and tissue collection in Portugal was partially supported by the SafeSea project EEAGrants PT 0039 (supported by Iceland, Liechtenstein and Norway through the EEA Financial Mechanism), the MarPro project Life09 NAT/PT/000038 (funded by the European Union program LIFE+) and the project CetSenti FCT RECI/AAG-GLO/0470/2012 (FCOMP- 01-0124-FEDER-027472) (funded by the program COMPETE and the Fundação para a Ciência e Tecnologia). G.J.P. thanks the University of Aveiro and Caixa Geral de Depósitos (Portugal) for financial support. The authors acknowledge the assistance of the chemical analysts at Marine Scotland Science with the fatty acid analysis.

Martin Heidegger's Mathematical Dialectic: Uncovering the Structure of Modernity

Martin Heidegger is generally regarded as one of the most significant—if also the most controversial—philosophers of the 20th century. Most scholarly engagement with Heidegger’s thought on Modernity approaches his work with a special focus on either his critique of technology, or on his more general critique of subjectivity. This dissertation project attempts to elucidate Martin Heidegger’s diagnosis of modernity, and, by extension, his thought as a whole, from the neglected standpoint of his understanding of mathematics, which he explicitly identifies as the essence of modernity.

Accordingly, our project attempts to work through the development of Modernity, as Heidegger understands it, on the basis of what we call a “mathematical dialectic.“ The basis of our analysis is that Heidegger’s understanding of Modernity, both on its own terms and in the context of his theory of history [Seinsgeschichte], is best understood in terms of the interaction between two essential, “mathematical” characteristics, namely, self-grounding and homogeneity. This project first investigates the mathematical qualities of these components of Modernity individually, and then attempts to trace the historical and philosophical development of Modernity on the basis of the interaction between these two components—an interaction that is, we argue, itself regulated by the structure of the mathematical, according to Heidegger’s understanding of the term.

The project undertaken here intends not only to serve as an interpretive, scholarly function of elucidating Heidegger’s understanding of Modernity, but also to advance the larger aim of defending the prescience, structural coherence, and relevance of Heidegger’s diagnosis of Modernity as such.

Inventory of SINOPS project data sets

During the SINOPS project, an optimal state of the art simulation of the marine silicon cycle is attempted employing a biogeochemical ocean general circulation model (BOGCM) through three particular time steps relevant for global (paleo-) climate. In order to tune the model optimally, results of the simulations are compared to a comprehensive data set of 'real' observations. SINOPS' scientific data management ensures that data structure becomes homogeneous throughout the project. Practical work routine comprises systematic progress from data acquisition, through preparation, processing, quality check and archiving, up to the presentation of data to the scientific community. Meta-information and analytical data are mapped by an n-dimensional catalogue in order to itemize the analytical value and to serve as an unambiguous identifier. In practice, data management is carried out by means of the online-accessible information system PANGAEA, which offers a tool set comprising a data warehouse, Graphical Information System (GIS), 2-D plot, cross-section plot, etc. and whose multidimensional data model promotes scientific data mining. Besides scientific and technical aspects, this alliance between scientific project team and data management crew serves to integrate the participants and allows them to gain mutual respect and appreciation.

Nonlinear soil-structure interaction for buried pressure pipes under differential ground motion

Pipelines extend thousands of kilometers across wide geographic areas as a network to provide essential services for modern life. It is inevitable that pipelines must pass through unfavorable ground conditions, which are susceptible to natural disasters. This thesis investigates the behaviour of buried pressure pipelines experiencing ground distortions induced by normal faulting. A recent large database of physical modelling observations on buried pipes of different stiffness relative to the surrounding soil subjected to normal faults provided a unique opportunity to calibrate numerical tools. Three-dimensional finite element models were developed to enable the complex soil-structure interaction phenomena to be further understood, especially on the subjects of gap formation beneath the pipe and the trench effect associated with the interaction between backfill and native soils. Benchmarked numerical tools were then used to perform parametric analysis regarding project geometry, backfill material, relative pipe-soil stiffness and pipe diameter. Seismic loading produces a soil displacement profile that can be expressed by isoil, the distance between the peak curvature and the point of contraflexure. A simplified design framework based on this length scale (i.e., the Kappa method) was developed, which features estimates of longitudinal bending moments of buried pipes using a characteristic length, ipipe, the distance from peak to zero curvature. Recent studies indicated that empirical soil springs that were calibrated against rigid pipes are not suitable for analyzing flexible pipes, since they lead to excessive conservatism (for design). A large-scale split-box normal fault simulator was therefore assembled to produce experimental data for flexible PVC pipe responses to a normal fault. Digital image correlation (DIC) was employed to analyze the soil displacement field, and both optical fibres and conventional strain gauges were used to measure pipe strains. A refinement to the Kappa method was introduced to enable the calculation of axial strains as a function of pipe elongation induced by flexure and an approximation of the longitudinal ground deformations. A closed-form Winkler solution of flexural response was also derived to account for the distributed normal fault pattern. Finally, these two analytical solutions were evaluated against the pipe responses observed in the large-scale laboratory tests.

UK consensus project on quality in palliative day services: developing a quality indicator set using the RAND/UCLA appropriateness method

Introduction
Evaluating quality of palliative day services is essential for assessing care across diverse settings, and for monitoring quality improvement approaches.

Aim
To develop a set of quality indicators for assessment of all aspects (structure, process and outcome) of care in palliative day services.

Methods
Using a modified version of the RAND/UCLA appropriateness method (Fitch et al., 2001), a multidisciplinary panel of 16 experts independently completed a survey rating the appropriateness of 182 potential quality indicators previously identified during a systematic evidence review. Panel members then attended a one day, face-to-face meeting where indicators were discussed and subsequently re-rated. Panel members were also asked to rate the feasibility and necessity of measuring each indicator.

Results
71 indicators classified as inappropriate during the survey were removed based on median appropriateness ratings and level of agreement. Following the panel discussions, a further 60 were removed based on appropriateness and feasibility ratings, level of agreement and assessment of necessity. Themes identified during the panel discussion and findings of the evidence review were used to translate the remaining 51 indicators into a final set of 27.

Conclusion
The final indicator set included information on rationale and supporting evidence, methods of assessment, risk adjustment, and recommended performance levels. Further implementation work will test the suitability of this ‘toolkit’ for measurement and benchmarking. The final indicator set provides the basis for standardised assessment of quality across services, including care delivered in community and primary care settings.

Reference

• Fitch K, Bernstein SJ, Aguilar MD, et al. The RAND/UCLA Appropriateness Method User’s Manual. Santa Monica, CA: RAND Corporation; 2001. http://www.rand.org/pubs/monograph_reports/MR1269

Are you ready for a tender project? – Analysis of organisational project management maturity in the Austrian-Hungarian border region

Are you ready for a tender project? – Analysis of organisational project management maturity in the Austrian- Hungarian border region. Since the 1990s the European Union has paid more and more attention to subsidising cross-border development. It is understandable that different funding from proposal sources is particularly important for the border area, especially to those of utmost importance that support co-operation and rural development. Therefore, they could become a driving force for development. The authors’ research analyses the organisational project management maturity of the projects implemented in the frame of the Austria-Hungary Cross-border Cooperation Programme 2007-2013 (AT-HU). Analysing this kind of organisation is an important issue, since the new call for proposals are open in 2016 and the results of this study may provide a self-evaluation opportunity to organisations that need to know if they are ready or mature enough for a new tender project. The aim of this study was twofold. First of all, those indicators that could be used to analyse the project management maturity of implementing organisations in the AT-HU programme were identified. Based on the empirical research these are the project experience accumulated by the organisation, the internal processes operating at the institution and the professional background. Secondly, factors that can affect this project management maturity were explored and we determined five influencing area: the organisational structure, culture, project managers motivation and the typical and important competences.

Using AHP and the IPMA Competence Baseline in the project managers selection process

This paper proposes the joint use of the AHP (Analytic Hierarchy Process) and the ICB (IPMA Competence Baseline), as a tool for the decision-making process of selecting the most suitable managers for projects. A hierarchical structure, comprising the IPMA’s ICB 3.0 contextual, behavioural and technical competence elements, is constructed for the selection of project managers. It also describes the AHP implementation, illustrating the whole process with an example using all the 46 ICB competence elements as model criteria. This tool can be of high interest to decision-makers because it allows comparing the candidates for managing a project using a systematic and rigorous process with a rich set of proven criteria.

Iowa DOT Project Management Peer Exchange, 2016

This project supported the planning and conduct of a two-day Iowa Department of Transportation–hosted peer exchange for state agencies that have implemented some or all of the suggested strategies outlined in the Second Strategic Highway Research Program–sponsored project R10, Project Management Strategies for Complex Projects. Presentations were made by participating states, and several opportunities were provided for directed discussion. General themes emerging from the presentations and discussions were identified as follows: To implement improvements in project management processes, agency leadership needs to decide that a new approach to project management is worth pursuing and then dedicate resources to developing a project management plan. The change to formalized project management and five-dimensional project management (5DPM) requires a culture shift in agencies from segmented “silo” processes to collaborative, cooperative processes that make communication and collaboration high priorities. Agencies need trained project managers who are empowered to execute the project management plan, as well as properly trained functional staff. Project management can be centralized or decentralized with equal effect. After an agency’s project management plan and structure are developed, software tools and other resources should be implemented to support the plan and structure. All projects will benefit from enhanced project management, but the project management plan should specify appropriate approaches for several project levels as defined by factors in addition to dollar value. Project management should be included in an agency’s project development manual.

European life project: a global strategy for the responsible use of a coastal lagoon: a case study from Portugal

Rin de Aveiro is a coastal lagoon located at the Central Region of Portugal subjected to the influence of the tides, resulting in a set of characteristic biotopes favouring anthropic and natural processes. Once managed and controlled correctly, each of these biotopes will allow simultaneously the biodiversity and integration in the making of the wetland landscape. In 1998, one of the final conclusions of the "MARIA" Demonstration Programme for the Integrated Management of Ria de Aveiro was that the poor current state of the environment area resulted from a set of interrelated factors. The Programme selected four (4) pilot-projects towards the integrated management of the lagoon biotopes as possible scenarios for an intervention. This selection was based in criteria related to environmental priorities and the maintenance of traditional economic activities in the region. The idea of choosing projects that would involve the whole geographic space of the Ria, without forgetting the other important themes interrelated with the Management Structure, emerged as a relevant aspect for their definition. Thus, and as a first test of this Management Structure functionality, the following task forces were put forward: Recovery and valorisation of the piers; Recovery of the former salt pans; Management of the agricultural fields of Baixo-Vouga; Implementation of measures for the classification of the Protected Landscape Area of the River Caster Mouth. This payer will report the main results of these pilot-projects attained during their first year period, especially the intervention strategies defined by the Partnership created for this aim.

Modélisation du comportement des bétons fibrés à ultra-hautes performances par la micromécanique : Effet de l'orientation des fibres à l'échelle de la structure

Cette thèse s’inscrit dans le contexte d’une optimisation industrielle et économique des éléments de structure en BFUP permettant d’en garantir la ductilité au niveau structural, tout en ajustant la quantité de fibres et en optimisant le mode de fabrication. Le modèle développé décrit explicitement la participation du renfort fibré en traction au niveau local, en enchaînant une phase de comportement écrouissante suivie d’une phase adoucissante. La loi de comportement est fonction de la densité, de l’orientation des fibres vis-à-vis des directions principales de traction, de leur élancement et d’autres paramètres matériaux usuels liés aux fibres, à la matrice cimentaire et à leur interaction. L’orientation des fibres est prise en compte à partir d’une loi de probabilité normale à une ou deux variables permettant de reproduire n’importe quelle orientation obtenue à partir d’un calcul représentatif de la mise en oeuvre du BFUP frais ou renseignée par analyse expérimentale sur prototype. Enfin, le modèle reproduit la fissuration des BFUP sur le principe des modèles de fissures diffuses et tournantes. La loi de comportement est intégrée au sein d’un logiciel de calcul de structure par éléments finis, permettant de l’utiliser comme un outil prédictif de la fiabilité et de la ductilité globale d’éléments en BFUP. Deux campagnes expérimentales ont été effectuées, une à l’Université Laval de Québec et l’autre à l’Ifsttar, Marne-la-Vallée. La première permet de valider la capacité du modèle reproduire le comportement global sous des sollicitations typiques de traction et de flexion dans des éléments structurels simples pour lesquels l’orientation préférentielle des fibres a été renseignée par tomographie. La seconde campagne expérimentale démontre les capacités du modèle dans une démarche d’optimisation, pour la fabrication de plaques nervurées relativement complexes et présentant un intérêt industriel potentiel pour lesquels différentes modalités de fabrication et des BFUP plus ou moins fibrés ont été envisagés. Le contrôle de la répartition et de l’orientation des fibres a été réalisé à partir d’essais mécaniques sur prélèvements. Les prévisions du modèle ont été confrontées au comportement structurel global et à la ductilité mis en évidence expérimentalement. Le modèle a ainsi pu être qualifié vis-à-vis des méthodes analytiques usuelles de l’ingénierie, en prenant en compte la variabilité statistique. Des pistes d’amélioration et de complément de développement ont été identifiées.

Journal publishing with Acrobat: the CAJUN project

The publication of material in electronic form should ideally preserve, in a unified document representation, all of the richness of the printed document while maintaining enough of its underlying structure to enable searching and other forms of semantic processing. Until recently it has been hard to find a document representation which combined these attributes and which also stood some chance of becoming a de facto multi-platform standard. This paper sets out experience gained within the Electronic Publishing Research Group at the University of Nottingham in using Adobe Acrobat software and its underlying PDF (Portable Document Format) notation. The CAJUN project1 (CD-ROM Acrobat Journals Using Networks) began in 1993 and has used Acrobat software to produce electronic versions of journal papers for network and CD-ROM dissemination. The paper describes the project's progress so far and also gives a brief assessment of PDF's suitability as a universal document interchange standard.