Development of an enzyme immobilization platform based on microencapsulation for paper-based biosensors

Un papier bioactif est obtenu par la modification d’un papier en y immobilisant une ou plusieurs biomolécules. La recherche et le développement de papiers bioactifs est en plein essor car le papier est un substrat peu dispendieux qui est déjà d’usage très répandu à travers le monde. Bien que les papiers bioactifs n’aient pas connus de succès commercial depuis la mise en marche de bandelettes mesurant le taux de glucose dans les années cinquante, de nombreux groupes de recherche travaillent à immobiliser des biomolécules sur le papier pour obtenir un papier bioactif qui est abordable et possède une bonne durée de vie. Contrairement à la glucose oxidase, l’enzyme utilisée sur ces bandelettes, la majorité des biomolécules sont très fragiles et perdent leur activité très rapidement lorsqu’immobilisées sur des papiers. Le développement de nouveaux papiers bioactifs pouvant détecter des substances d’intérêt ou même désactiver des pathogènes dépend donc de découverte de nouvelles techniques d’immobilisation des biomolécules permettant de maintenir leur activité tout en étant applicable dans la chaîne de production actuelle des papiers fins. Le but de cette thèse est de développer une technique d’immobilisation efficace et versatile, permettant de protéger l’activité de biomolécules incorporées sur des papiers. La microencapsulation a été choisie comme technique d’immobilisation car elle permet d’enfermer de grandes quantités de biomolécules à l’intérieur d’une sphère poreuse permettant leur protection. Pour cette étude, le polymère poly(éthylènediimine) a été choisi afin de générer la paroi des microcapsules. Les enzymes laccase et glucose oxidase, dont les propriétés sont bien établies, seront utilisées comme biomolécules test. Dans un premier temps, deux procédures d’encapsulation ont été développées puis étudiées. La méthode par émulsion produit des microcapsules de plus petits diamètres que la méthode par encapsulation utilisant un encapsulateur, bien que cette dernière offre une meilleure efficacité d’encapsulation. Par la suite, l’effet de la procédure d’encapsulation sur l’activité enzymatique et la stabilité thermique des enzymes a été étudié à cause de l’importance du maintien de l’activité sur le développement d’une plateforme d’immobilisation. L’effet de la nature du polymère utilisé pour la fabrication des capsules sur la conformation de l’enzyme a été étudié pour la première fois. Finalement, l’applicabilité des microcapsules de poly(éthylèneimine) dans la confection de papiers bioactifs a été démontré par le biais de trois prototypes. Un papier réagissant au glucose a été obtenu en immobilisant des microcapsules contenant l’enzyme glucose oxidase. Un papier sensible à l’enzyme neuraminidase pour la détection de la vaginose bactérienne avec une plus grande stabilité durant l’entreposage a été fait en encapsulant les réactifs colorimétriques dans des capsules de poly(éthylèneimine). L’utilisation de microcapsules pour l’immobilisation d’anticorps a également été étudiée. Les avancées au niveau de la plateforme d’immobilisation de biomolécules par microencapsulation qui ont été réalisées lors de cette thèse permettront de mieux comprendre l’effet des réactifs impliqués dans la procédure de microencapsulation sur la stabilité, l’activité et la conformation des biomolécules. Les résultats obtenus démontrent que la plateforme d’immobilisation développée peut être appliquée pour la confection de nouveaux papiers bioactifs.

A Strip-Loaded Feed-Horn Antenna

Design and development of a new feed -horn antenna with low sidelobe levels is reported . The E-walls of this antenna are fabricated with low -loss dielectric substrate , periodicallyloaded with thin conducting strips . The antenna is found to be simulating the radiation characteristics of metallic Corrugated horns . This can be an ideal substitute for metallic Corrugated horns with added advantages like light -weight and low production cost

A Strip-Loaded Feed-Horn antenna

Design and development of a new feed -horn antenna with low sidelobe levels is reported . The E-walls of this antenna are fabricated with low -loss dielectric substrate , periodically loaded with thin conducting strips . The antenna is found to be simulating the radiation characteristics of metallic corrugated horns . This can be an ideal substitute for metallic corrugated horns with added advantages like light -weight and low production cost.

A Strip-Loaded Feed-Horn antenna

Design and development of a new feed -horn antenna with low sidelobe levels is reported . The E-walls of this antenna are fabricated with low -loss dielectric substrate , periodically loaded with thin conducting strips . The antenna is found to be simulating the radiation characteristics of metallic corrugated horns . This can be an ideal substitute for metallic corrugated horns with added advantages like light -weight and low production cost.

Studies on adhesives for bonding rubber to rubber and rubber to textiles

The primary objective of this investigation has been to develop more efficient and low cost adhesives for bonding various elastomer combinations particularly NR to NR, NR/PB to NR/PB, CR to CR,NR to CR and NR to NBR.A significant achievement of the investigation was the development of solventless and environment friendly solid adhesives for NR to NR and NR/PB to NR/PB particularly for precured retreading. Conventionally used adhesives in this area are mostly NR based adhesive strips in the presence of a dough. The study has shown that an ultra accelerator could be added to the dough just before applying it on the tire which can significantly bring down the retreading time resulting in prolonged tire service and lower energy consumption. Further latex reclaim has been used for the preparation of the solid strip which can reduce the cost considerably.Another significant finding was that by making proper selection of the RF resin, the efficiency and shelflife of the RFL adhesive used for nylon and rayon tire cord dipping can be improved. In the conventionally used RFL adhesive, the resin once prepared has to be added to the latex within 30 minutes and the RFL has to be used after 4 hours maturation time maximum shelf life of the RFL dip solution being 72 hours. In this study a formaldehyde deficient resin was used and hence more flexibility was available for mixing with latex and maturing. It also has a much longer shelf life. In the method suggested in this study, formaldehyde donors were added only in the rubber compound to make up the formaldehyde deficiency in the RFL. The results of this investigation show that the pull through load by employing this method and the conventional method are comparable. This study has also shown that the amount of RF resin with RFL adhesive can be partially replaced by other modifying agents for cost reduction.Cashew nut shell liquid (CNSL) resin can be employed for improving the bonding of dipped nylon and rayon cord with NR.Since CNSL resin cannot be added in the dip solution since it is not soluble in water, it was added in the rubber compound. The amount of wood rosin in the rubber compound can be reduced by using CNSL resin.Another interesting result of the investigation was the use of CR based adhesive modified with chlorinated natural rubber for CR to CR bonding. Addition of chlorinated natural rubber was found to improve sea water resistance of CR based adhesive. In the bonding of a polar rubber like nitrile rubber or polychloroprene rubber to a non polar rubber like natural rubber, an adhesive based on polychloroprene rubber was found to be effective.

Development and Analysis of a Compact Dual-Band Coplanar Antenna

The coplanar wave guide is an attractive device in microwave integrated circuits due to its uniplanar nature, ease of fabrication and low production cost. Several attempts are already done to explore the radiating modes in coplanar wave guide transmission lines. Usually coplanar wave guides are excited by an SMA connector with its centre conductor connected to the exact middle of the centre strip and the outer ground conductor to the two ground strips. The mode excited on it is purely a bound mode. The E-field distribution in the two slots are out of phase and there for cancels at the far field. This thesis addresses an attempt to excite an in phase E-field distribution in the two slots of the co planar wave guide by employing a feed asymmetry, in order to get radiation from the two large slot discontinuities of the coplanar waveguide. The omni directional distribution of the radiating energy can be achieved by widening the centre strip.The first part of the thesis deals with the investigations on the resonance phenomena of conventional coplanar waveguides at higher frequency bands. Then an offset fed open circuited coplanar waveguide supporting resonance/radiation phenomena is analyzed. Finally, a novel compact co planar antenna geometry with dual band characteristics, suitable for mobile terminal applications is designed and characterized using the inferences from the above study.

Compact uniplanar antenna for WLAN applications

A compact dual-band uniplanar antenna for operation in the 2.4/5.2/5.8 GHz WLAN/HIPERLAN2 communication bands is presented. The dual-band antenna is obtained by modifying one of the lateral strips of a slot line, thereby producing two different current paths. The antenna occupies a very small area of 14.5times16.6 mm2 including the ground plane on a substrate having dielectric constant 4.4 and thickness 1.6 mm at 2.2 GHz. The antenna resonates with two bands from 2.2 to 2.52 GHz and from 5 to 10 GHz with good matching, good radiation characteristics and moderate gain

Strip-loaded hollow dielectric H-plane sectoral horn antennas for square radiation pattern

The radiation characteristics of a new type of hollow dielectric H-plane sectoral horn antenna are presented. Metallic strips of optimum length are loaded on the H-walls of the sectoral horns. The effects of strip loading for producing square patterns in the H plane are discussed.

A new corner reflector antenna with periodic strip subreflectors

This paper presents the design of a new type of corner reflector (CR) antenna and the experimental investigation of its radiation characteristics. The design involves the addition of planar parallel periodic strips to the two sides of a CR antenna. The position, angular orientation, and number of strips have a notable effect on the H-plane radiation characteristics of the antenna. Certain configurations of the new antenna are capable of producing very sharp axial beams with gain on the order of 5 dB over the square corner reflector antenna. A configuration that can provide symmetric twin beams with enhanced gain and reduced half-power beam width (HPBW) is also presented.

The problem of the graphic artist

'The problem of the graphic artist' is a small example of applying elementary mathematics (divisibility of natural numbers) to a real problem which we ourselves have actually experienced. It deals with the possibilities for partitioning a sheet of paper into strips. In this contribution we report on a teaching unit in grade 6 as well as on informal tests with students in school and university. Finally we analyse this example methodologically, summarise our observations with pupils and students, and draw some didactical conclusions.

Einfluss der Flächenwahl, Anbaudichte und Landschaftsstruktur auf den Befallsstatus und die Ausbreitung der Möhrenfliege Psila rosae F. (Diptera: Psilidae) im ökologischen Möhrenanbau

Durch die vermehrte Nachfrage von Biomöhren im Lebensmitteleinzelhandel ist die Anbaufläche ökologisch erzeugter Möhren in den letzten zehn Jahren deutlich angestiegen. Der Anbau konzentriert sich auf bestimmte Regionen und erfolgte damit zunehmend auf großen Schlägen in enger räumlicher und zeitlicher Abfolge. Mit der steigenden Wirtspflanzenpräsenz steigt auch der Befallsdruck durch die Möhrenfliege. Während der Schädling im konventionellen Anbau mit Insektiziden kontrolliert wird, stehen dem Ökologischen Landbau bisher keine direkten Regulative zur Verfügung. Ziel der Untersuchungen war es, unter den Praxisbedingungen des ökologischen Möhrenanbaus einzelbetriebliche und überregionale Muster beteiligter Risikofaktoren im Befallsgeschehen zu identifizieren und so Möglichkeiten einer verbesserten Prävention und Regulation aufzuzeigen. Über einen Zeitraum von drei Jahren wurden auf fünf Betrieben in Niedersachsen und Hessen umfangreiche Felddaten erhoben und diese unter Verwendung von GIS – Software und dem Simulationsmodell SWAT analysiert. Untersuchte Einflussgrößen umfassten (1) die Distanz zu vorjährigen Möhrenfeldern, (2) die zeitliche Möhrenanbauperiode, (3) Vegetationselemente und (4) der experimentelle Einsatz von Fangpflanzen zur Unterdrückung der Fliegenentwicklung. Unter der Berücksichtigung deutlicher einzelbetrieblicher Unterschiede sind die wichtigsten Ergebnisse der Studie wie folgt zu benennen: (1) Auf Betrieben mit Befall im zurückliegenden Anbaujahr zeigte sich die Distanz zu vorjährigen Möhrenfeldern als der wichtigste Risikofaktor. Das Ausbreitungsverhalten der 1. Generation Möhrenfliege erwies sich zudem als situationsgebunden anpassungsfähig. Fliegensumme und Befall waren jeweils in dem zu Vorjahresflächen nächstgelegen Feld am größten, während jeweils dahinter liegende Möhrenschläge entsprechend weniger Fliegenzahlen und Befall auswiesen. Aus den Ergebnissen wird als vorrangige Verbreitungskapazität der 1. Generation Möhrenfliegen innerhalb von 1000 m abgeleitet. (2) Betriebe mit kontinuierlicher Möhren - Anbaubauperiode (ca. April – Oktober), die langfristig die Entwicklung sowohl der 1. als auch der 2. Generation Fliegen unterstützten, verzeichneten stärkere Fliegenprobleme. Hinsichtlich einer verbesserten Prävention wird empfohlen mit einer strikten räumlichen Trennung früher und später Sätze ein Aufschaukeln zwischen den Generationen zu vermeiden. (3) Der Einfluss der Vegetation ließ sich weniger eindeutig interpretieren. Einzelbetriebliche Hinweise, dass Kleingehölze (Hecken und Bäume) im Radius zwischen aktueller und vorjähriger Möhrenfläche die Befallswahrscheinlichkeit erhöhen, konnten mit einem berechneten Gesamtmaß für die regionale holzige Vegetation nicht bestätigt werden. Der großräumigen holzigen Vegetation wird im Vergleich zur Feldrandvegetation daher beim Befallsgeschehen eine geringe Bedeutung zugeschrieben. (4) Drei Meter (vier Dämme) breiter Möhren – Fangstreifen auf den vorjährigen Möhrenfeldern eignen sich bereits ab dem Keimblattstadium, um erhebliches Befallspotential zu binden. Eine mechanische Entfernung der Fangpflanzen (Grubbern) mitsamt dem Befallspotential erzielte in 2008 eine 100 %-ige Unterdrückung der Möhrenfliegenentwicklung, in 2009 jedoch nur zu maximal 41 %. Als mögliche Synthese der Ergebnisse zur Ausbreitung der Möhrenfliegen im Frühjahr und zur zeitlichen Koinzidenz mit der Möhrenentwicklung wird als Empfehlung diskutiert, mit Hilfe einer angepassten Flächenwahl die Fliegenausbreitung räumlich an frühen Sätzen zu binden, um entsprechend befallsarme Regionen für entfernt liegende späte (empfindlichere) Möhrensätze zu schaffen.

Mousse de Quarck

Vinyeta d'un còmic ambientat en un laboratori de recerca

Sin City: cuando el cine se rinde a los pies del cómic

Proposta didàctica que se situa entre els llenguatges del còmic i del cinema per a promoure la reflexió sobre la cerca de noves formes de narrar. El fil conductor és Sin City i es proposen, també, 10 activitats per als alumnes

Forest Policy Scenario Analysis: Sensitivity of Songbird Community to Changes in Forest Cover Amount and Configuration

Changes in mature forest cover amount, composition, and configuration can be of significant consequence to wildlife populations. The response of wildlife to forest patterns is of concern to forest managers because it lies at the heart of such competing approaches to forest planning as aggregated vs. dispersed harvest block layouts. In this study, we developed a species assessment framework to evaluate the outcomes of forest management scenarios on biodiversity conservation objectives. Scenarios were assessed in the context of a broad range of forest structures and patterns that would be expected to occur under natural disturbance and succession processes. Spatial habitat models were used to predict the effects of varying degrees of mature forest cover amount, composition, and configuration on habitat occupancy for a set of 13 focal songbird species. We used a spatially explicit harvest scheduling program to model forest management options and simulate future forest conditions resulting from alternative forest management scenarios, and used a process-based fire-simulation model to simulate future forest conditions resulting from natural wildfire disturbance. Spatial pattern signatures were derived for both habitat occupancy and forest conditions, and these were placed in the context of the simulated range of natural variation. Strategic policy analyses were set in the context of current Ontario forest management policies. This included use of sequential time-restricted harvest blocks (created for Woodland caribou (Rangifer tarandus) conservation) and delayed harvest areas (created for American marten (Martes americana atrata) conservation). This approach increased the realism of the analysis, but reduced the generality of interpretations. We found that forest management options that create linear strips of old forest deviate the most from simulated natural patterns, and had the greatest negative effects on habitat occupancy, whereas policy options that specify deferment and timing of harvest for large blocks helped ensure the stable presence of an intact mature forest matrix over time. The management scenario that focused on maintaining compositional targets best supported biodiversity objectives by providing the composition patterns required by the 13 focal species, but this scenario may be improved by adding some broad-scale spatial objectives to better maintain large blocks of interior forest habitat through time.

Life-cycle simulations of shallow frontal waves and the impact of deformation strain

The life-cycle of shallow frontal waves and the impact of deformation strain on their development is investigated using the idealised version of the Met Office non-hydrostatic Unified Model which includes the same physics and dynamics as the operational forecast model. Frontal wave development occurs in two stages; first, a deformation strain is applied to a front and a positive potential vorticity (PV) strip forms, generated by latent heat release in the frontal updraft; second, as the deformation strain is reduced the PV strip breaks up into individual anomalies. The circulations associated with the PV anomalies cause shallow frontal waves to form. The structure of the simulated frontal waves is consistent with the conceptual model of a frontal cyclone. Deeper frontal waves are simulated if the stability of the atmosphere is reduced. Deformation strain rates of different strengths are applied to the PV strip to determine whether a deformation strain threshold exists above which frontal wave development is suppressed. An objective method of frontal wave activity is defined and frontal wave development was found to be suppressed by deformation strain rates $\ge 0.4\times10^{-5}\mbox{s}^{-1}$. This value compares well with observed deformation strain rate thresholds and the analytical solution for the minimum deformation strain rate needed to suppress barotropic frontal wave development. The deformation strain rate threshold is dependent on the strength of the PV strip with strong PV strips able to overcome stronger deformation strain rates (leading to frontal wave development) than weaker PV strips.