On Nonlinear Dynamics and Control of A Particular Portal Frame Foundation Model, Excited by a Non-Ideal Motor

The nonlinear dynamic response and a nonlinear control method of a particular portal frame foundation for an unbalanced rotating machine with limited power (non-ideal motor) are examined. Numerical simulations are performed for a set of control parameters (depending on the voltage of the motor) related to the static and dynamic characteristics of the motor. The interaction of the structure with the excitation source may lead to the occurrence of interesting phenomena during the forward passage through the several resonance states of the systems. A mathematical model having two degrees of freedom simplifies the non-ideal system. The study of controlling steady-state vibrations of the non-ideal system is based on the saturation phenomenon due to internal resonance.

Dynamic analysis of a new piezoelectric flextensional actuator using the J1-J4 optical interferometric method

Piezoelectric actuators are widely used in positioning systems which demand high resolution such as scanning microscopy, fast mirror scanners, vibration cancellation, cell manipulation, etc. In this work a piezoelectric flextensional actuator (PFA), designed with the topology optimization method, is experimentally characterized by the measurement of its nanometric displacements using a Michelson interferometer. Because this detection process is non-linear, adequate techniques must be applied to obtain a linear relationship between an output electrical signal and the induced optical phase shift. Ideally, the bias phase shift in the interferometer should remain constant, but in practice it suffers from fading. The J1-J4 spectral analysis method provides a linear and direct measurement of dynamic phase shift in a no-feedback and no-phase bias optical homodyne interferometer. PFA application such as micromanipulation in biotechnology demands fast and precise movements. So, in order to operate with arbitrary control signals the PFA must have frequency bandwidth of several kHz. However as the natural frequencies of the PFA are low, unwanted dynamics of the structure are often a problem, especially for scanning motion, but also if trajectories have to be followed with high velocities, because of the tracking error phenomenon. So the PFA must be designed in such a manner that the first mechanical resonance occurs far beyond this band. Thus it is important to know all the PFA resonance frequencies. In this work the linearity and frequency response of the PFA are evaluated up to 50 kHz using optical interferometry and the J1-J4 method.

State Dependent Riccati Equation (SDRE) control method applied in cancellation of a parametric resonance in a magnetically levitated body

Here, a simplified dynamical model of a magnetically levitated body is considered. The origin of an inertial Cartesian reference frame is set at the pivot point of the pendulum on the levitated body in its static equilibrium state (ie, the gap between the magnet on the base and the magnet on the body, in this state). The governing equations of motion has been derived and the characteristic feature of the strategy is the exploitation of the nonlinear effect of the inertial force associated, with the motion of a pendulum-type vibration absorber driven, by an appropriate control torque [4]. In the present paper, we analyzed the nonlinear dynamics of problem, discussed the energy transfer between the main system and the pendulum in time, and developed State Dependent Riccati Equation (SDRE) control design to reducing the unstable oscillatory movement of the magnetically levitated body to a stable fixed point. The simulations results showed the effectiveness of the (SDRE) control design. Copyright © 2011 by ASME.

3D stability orbits close to 433 Eros using an effective polyhedral model method

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Interpolating scattering amplitudes between the instant form and the front form of relativistic dynamics

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Scattering Amplitudes Interpolating Between Instant Form and Front Form of Relativistic Dynamics

Among the three forms of relativistic Hamiltonian dynamics proposed by Dirac in 1949, the front form has the largest number of kinematic generators. This distinction provides useful consequences in the analysis of physical observables in hadron physics. Using the method of interpolation between the instant form and the front form, we introduce the interpolating scattering amplitude that links the corresponding time-ordered amplitudes between the two forms of dynamics and provide the physical meaning of the kinematic transformations as they allow the invariance of each individual time-ordered amplitude for an arbitrary interpolation angle. We discuss the rationale for using front form dynamics, nowadays known as light-front dynamics (LFD), and present a few explicit examples of hadron phenomenology that LFD uniquely can offer from first-principles quantum chromodynamics. In particular, model-independent constraints are provided for the analyses of deuteron form factors and the N Delta transition form factors at large momentum transfer squared Q(2). The swap of helicity amplitudes between the collinear and non-collinear kinematics is also discussed in deeply virtual Compton scattering.

A new probabilistic canopy dynamics model (SLCD) that is suitable for evergreen and deciduous forest ecosystems

There are strong uncertainties regarding LAI dynamics in forest ecosystems in response to climate change. While empirical growth & yield models (G&YMs) provide good estimations of tree growth at the stand level on a yearly to decennial scale, process-based models (PBMs) use LAI dynamics as a key variable for enabling the accurate prediction of tree growth over short time scales. Bridging the gap between PBMs and G&YMs could improve the prediction of forest growth and, therefore, carbon, water and nutrient fluxes by combining modeling approaches at the stand level.Our study aimed to estimate monthly changes of leaf area in response to climate variations from sparse measurements of foliage area and biomass. A leaf population probabilistic model (SLCD) was designed to simulate foliage renewal. The leaf population was distributed in monthly cohorts, and the total population size was limited depending on forest age and productivity. Foliage dynamics were driven by a foliation function and the probabilities ruling leaf aging or fall. Their formulation depends on the forest environment.The model was applied to three tree species growing under contrasting climates and soil types. In tropical Brazilian evergreen broadleaf eucalypt plantations, the phenology was described using 8 parameters. A multi-objective evolutionary algorithm method (MOEA) was used to fit the model parameters on litterfall and LAI data over an entire stand rotation. Field measurements from a second eucalypt stand were used to validate the model. Seasonal LAI changes were accurately rendered for both sites (R-2 = 0.898 adjustment, R-2 = 0.698 validation). Litterfall production was correctly simulated (R-2 = 0.562, R-2 = 0.4018 validation) and may be improved by using additional validation data in future work. In two French temperate deciduous forests (beech and oak), we adapted phenological sub-modules of the CASTANEA model to simulate canopy dynamics, and SLCD was validated using LAI measurements. The phenological patterns were simulated with good accuracy in the two cases studied. However, IA/max was not accurately simulated in the beech forest, and further improvement is required.Our probabilistic approach is expected to contribute to improving predictions of LAI dynamics. The model formalism is general and suitable to broadleaf forests for a large range of ecological conditions. (C) 2014 Elsevier B.V. All rights reserved.

Combined active and semi-supervised learning using particle walking temporal dynamicscombined active and semi-supervised learning using particle walking temporal dynamics

Both Semi-Supervised Leaning and Active Learning are techniques used when unlabeled data is abundant, but the process of labeling them is expensive and/or time consuming. In this paper, those two machine learning techniques are combined into a single nature-inspired method. It features particles walking on a network built from the data set, using a unique random-greedy rule to select neighbors to visit. The particles, which have both competitive and cooperative behavior, are created on the network as the result of label queries. They may be created as the algorithm executes and only nodes affected by the new particles have to be updated. Therefore, it saves execution time compared to traditional active learning frameworks, in which the learning algorithm has to be executed several times. The data items to be queried are select based on information extracted from the nodes and particles temporal dynamics. Two different rules for queries are explored in this paper, one of them is based on querying by uncertainty approaches and the other is based on data and labeled nodes distribution. Each of them may perform better than the other according to some data sets peculiarities. Experimental results on some real-world data sets are provided, and the proposed method outperforms the semi-supervised learning method, from which it is derived, in all of them.

NDVI and vegetation phenology dynamics under the influence of sunshine duration on the Tibetan plateau

Climate change has significantly influenced vegetation dynamics on the Tibetan Plateau (TP). Past research mainly focused on vegetation responses to temperature variation and water stress, but the influence of sunshine duration on NDVI and vegetation phenology on the TP is not well understood. In this study, NDVI time series from 1982-2008 were used to retrieve spatiotemporal vegetation dynamics on the TP. Empirical orthogonal function (EOF) analysis was conducted to understand the spatiotemporal variations of NDVI. The Start of Season (SOS) was estimated from NDVI time series with a local threshold method. The first EOF, accounting for 35.1% of NDVI variations on the TP, indicates that NDVI variations are larger in areas with shorter sunshine duration. The needle-leaved forest and shrub in the southeastern TP are more sensitive to sunshine duration anomalies (p < 0.01) than broad-leaved forest, steppe, and meadow due to spatial and altitudinal distribution of sunshine duration and vegetation types. The decrease in sunshine duration for the growing season on the TP has resulted in a decreased NDVI trend in some areas of southeastern TP (p ranging from 0.32-0.05 with threshold ranging from 0.05 to 0.25) in spite of the overall NDVI increase. SOS dynamics in most parts of the TP were mainly related to temperature variability, with precipitation and sunshine duration playing a role in a few regions. This study enhances our understanding of vegetation responses to climatic change on the TP.

Speleoclimate dynamics in Santana Cave (PETAR, S(a)over-tildeo Paulo State, Brazil): general characterization and implications for tourist management

Show caves provide tourists with the opportunity to have close contact with natural underground spaces. However, visitation to these places also creates a need for management measures, mainly the definition of tourist carrying capacity. The present work describes the results of climate monitoring and atmospheric profiling performed in Santana Cave (Alto Ribeira State and Tourist Park - PETAR, Brazil) between 2008 and 2011. Based on the results, distinct preliminary zones with different levels of thermal variation were identified, which classify Santana Cave as a warm trap. Two critical points along the tourist route (Cristo and Encontro Halls) were identified where the temperature of the locality increased by 1.3 degrees C when tourists were present. Air flow from the inner cave to the outside occurs during the austral summer, and the opposite flow occurs when the outside environment is colder than the air inside the cave during the austral winter. The temperature was used to establish thresholds to the tourist carrying capacity by computing the recovery time of the atmospheric conditions after the changes caused by the presence of tourists. This method suggests a maximum limit of approximately 350 visits per day to Santana Cave. The conclusion of the study is that Santana Cave has an atmosphere that is highly connected with the outside; daily variations in temperature and, to a lesser extent, in the relative humidity occur throughout the entire studied area of the cave. Therefore, the tourist carrying capacity in Santana Cave can be flexible and can be implemented based on the climate seasonality, the tourism demand and other management strategies.

Plasma Steroid Dynamics in Late- and Near-term Naturally and Artificially Conceived Bovine Pregnancies as Elucidated by Multihormone High-resolution LC-MS/MS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Complex modal analysis of a vertical rotor through finite element method

Natural frequencies were analyzed (axial, torsional and flexural) and frequency response of a vertical rotor with a hard disk at the edge through the classical and complex modal analysis. The mathematical modeling was based on the theory of Euler-Bernoulli beam. The equation that rules the movement was obtained through the Lagrangian formulation. The model considered the effects of bending, torsion and axial deformation of the shaft, besides the gravitational and gyroscopic effects. The finite element method was used to discretize the structure into hollow cylindrical elements with 12 degrees of freedom. Mass, stiffness and gyroscopic matrices were explained consistently. This type of tool, based on the use of complex coordinates to describe the dynamic behavior of rotating shaft, allows the decomposition of the system in two submodes, backward and forward. Thus, it is possible to clearly visualize that the orbit and direction of the precessional motion around the line of the rotating shaft is not deformed. A finite element program was developed using Matlab ®, and numerical simulations were performed to validate this model.

Theoretical approaches to liana management: a search for a less harmful method

Lianas can change forest dynamics, slowing down forest regeneration after a perturbation. In these cases, it may be necessary to manage these woody climbers. Our aim was to simulate two management strategies: (1) focusing on abundant liana species and (2) focusing on the largest lianas, and contrast them with the random removal of lianas. We applied mathematical simulations for liana removal in three different vegetation types in southeastern Brazil: a Rainforest, a Seasonal Tropical Forest, and a Woodland Savanna. Using these samples, we performed simulations based on two liana removal procedures and compared them with random removal. We also used regression analysis with quasi-Poisson distribution to test whether larger lianas were aggressive, i.e., if they climbed into many trees. The procedure of cutting larger lianas was as effective as cutting them randomly and proved not to be a good method for liana management. Moreover, most of the lianas climbed into one or two trees, i.e., were not aggressive. Cutting the most abundant lianas proved to be a more effective method than cutting lianas randomly. This method could maintain liana richness and presumably should accelerate forest regeneration.

Dynamics of doublon-holon pairs in Hubbard two-leg ladders

The dynamics of holon-doublon pairs is studied in Hubbard two-leg ladders using the time-dependent density matrix renormalization group method. We find that the geometry of the two-leg ladder, which is qualitatively different from a one-dimensional chain due to the presence of a spin gap, strongly affects the propagation of a doublon-holon pair. Two distinct regimes are identified. For weak interleg coupling, the results are qualitatively similar to the case of the propagation previously reported in Hubbard chains, with only a renormalization of parameters. More interesting is the case of strong interleg coupling where substantial differences arise, particularly regarding the double occupancy and properties of the excitations such as the doublon speed. Our results suggest a connection between the presence of a spin gap and qualitative changes in the doublon speed, indicating a weak coupling between the doublon and the magnetic excitations.

Employing perichromism for probing the properties of carboxymethyl cellulose films: an expedient, accurate method for the determination of the degree of substitution of the biopolymer derivative

The properties of films of carboxymethyl cellulose, CMC, of different degree of substitution, DS, have been examined by the use of perichromic indicators (probes). The film properties that have been determined are: empirical polarity, E-T(33); "acidity", alpha; "basicity", beta; and dipolarity/polarizability, pi*. This has been achieved by employing the following perichromic probes: 4-nitroaniline, 4-nitroanisole, 4-nitro-N,N-dimethylaniline, and 2,6-dichloro-4-(2,4,6-triphenyl-pyridinium-1-yl)phenolate, WB. The correlations between both E-T(33)- or pi* and DS were found to be linear; that between beta and DS is a second order polynomial; no obvious correlation was found between alpha and DS. The polarities of CMC films are in the range of those of butyl alcohols. As models for CMC, we have employed cellulose plus CMC of high DS; oxidized cellulose with degree of oxidation = 0.5; sodium glucuronate. The former model behaved akin to CMC, but the plots of the perichromic properties versus DS showed different slopes/intercepts. FTIR data and molecular dynamics simulations on the solvation of WB have shown that this difference can be traced to more efficient hydrogen bonding between the film of the model and the probe. This affects the intra-molecular charge-transfer energy of the latter, leading to different responses to the variation of DS. Based on the excellent linear correlation between E-T(33) and DS, for CMC from different origins, we suggest that perichromism is a simple, accurate, and expedient alternative for the determination of DS of the biopolymer derivative.