Thickness dependence of structure and optical properties of silver films deposited by magnetron sputtering

A series of silver films with different thickness were prepared under identical conditions by direct current magnetron sputtering. The optical properties of the silver films were measured using spectrophotometric techniques and the optical constants were calculated from reflection and transmission measurements made at near normal incidence. The results show that the optical properties and constants are affected by films' thickness. Below the critical thickness of 17 nm at which Ag film forms a continuous film, the optical properties and constants vary significantly as the thickness of films increases and then tends to a stable value which is reached at 41 nm. X-ray diffraction measurements were carried out to examine the structure and stress evolution of the Ag films as a function of films' thickness. It was found that the interplanar distance of (111) orientation decreases when the film thickness increases and tends to be close to that of bulk material. The compressive strains also decrease with increasing thickness. (C) 2007 Published by Elsevier B.V.

Evolutionary associations between sand seatrout (Cynoscion arenarius) and silver seatrout (C. nothus) inferred from morphological characters, mitochondrial DNA, and microsatellite markers

The evolutionary associations between closely related fish species, both contemporary and historical, are frequently assessed by using molecular markers, such as microsatellites. Here, the presence and variability of microsatellite loci in two closely related species of marine fishes, sand seatrout (Cynoscion arenarius) and silver seatrout (C. nothus), are explored by using heterologous primers from red drum (Sciaenops ocellatus). Data from these loci are used in conjunction with morphological characters and mitochondrial DNA haplotypes to explore the extent of genetic exchange between species offshore of Galveston Bay, TX. Despite seasonal overlap in distribution, low genetic divergence at microsatellite loci, and similar life history parameters of C. arenarius and C. nothus, all three data sets indicated that hybridization between these species does not occur or occurs only rarely and that historical admixture in Galveston Bay after divergence between these species was unlikely. These results shed light upon the evolutionary history of these fishes and highlight the genetic properties of each species that are influenced by their life history and ecology.

Spatial and seasonal abundance of sand seatrout (Cynoscion arenarius) and silver seatrout (C. nothus) off the coast of Texas, determined with twenty years of data (1987–200

Sand seatrout (Cynoscion arenarius) and silver seatrout (C. nothus) are both found within the immediate offshore areas of the Gulf of Mexico, especially around Texas; however information is limited on how much distributional overlap really occurs between these species. In order to investigate spatial and seasonal differences between species, we analyzed twenty years of bay and offshore trawl data collected by biologists of the Coastal Fisheries Division, Texas Parks and Wildlife Department. Sand seatrout and silver seatrout were distributed differently among offshore sampling areas, and salinity and water depth appeared to correlate with their distribution. Additionally, within the northernmost sampling area of the gulf waters, water depth correlated significantly with the presence of silver seatrout, which were found at deeper depths than sand seatrout. There was also an overall significant decrease in silver seatrout abundance during the summer season, when temperatures were at their highest, and this decrease may have indicated a migration farther offshore. Sand seatrout abundance had an inverse relationship with salinity and water depth offshore. In addition, sand seatrout abundance was highest in bays with direct passes to the gulf and correlated with corresponding abundance in offshore areas. These data highlight the seasonal and spatial differences in abundance between sand and silver seatrout and relate these differences to the hydrological and geological features found along the Texas coastline.

A estandardização dos contratos internacionais e o modelo FIDIC - Silver Book para contratos EPC

No presente trabalho acadêmico se apresentarão as principais características do processo de globalização, passando-se à exposição da relevância do Direito Comparado, até se chegar à análise da adoção de modelos internacionais de contratos como esforço uniformizador, de modo a reduzir riscos e a minorar custos de transação. Na sequência, investigar-se-á o modelo contratual EPC (acrônimo das palavras inglesas Engineering, Procurement and Construction - Engenharia, Gestão de Compra e Construção), originário da prática anglo-saxã, focando-se na análise e na qualificação tipológica do Contrato EPC, comparando-o com institutos existentes na legislação brasileira. Delinear-se-á o contexto de disseminação do Contrato EPC no exterior e sua consolidação no Brasil, amparadas, em larga medida, na necessidade de que - em vultosos projetos de infraestrutura, sobretudo em áreas de investimento em relação às quais os empreendedores desconheçam o ambiente regulatório e a realidade socioeconômica se tenha estatuto privado a transladar ao construtor a maior parte dos riscos atinentes a serviços complexos de engenharia. Enfrentar-se-ão as características essenciais deste modelo contratual, tomando-se como padrão o Conditions of Contract for EPC Turnkey Projects - general conditions, guidance for the preparation of particular conditions, forms of letter of tender, contract agreement and dispute adjudication agreement, recomendado pela Fédération Internationale des Ingénieurs Conseils - FIDIC. Apresentar-se-á como o direito estrangeiro equilibra a assunção dos riscos pelo construtor (Contractor ou Builder), inclusive aqueles, referentes a eventos não antecipáveis (unforeseen risks), inobstante a preservação pelo contratante (Owner) de lato poder de monitoramento e fiscalização (overseeing attributions, key personnel and contract manager approval, step-in rights).

Monoculture of silver barb (Puntius gonionotus Bleeker) in rice floodwaters in Bangladesh

On-station and on-farm trials with silver barb (Puntius gonionotus) monoculture in rice floodwaters in Bangladesh are summarized and discussed in this article.

Surface plasmons and effects of losses in propagating modes in a chain of silver nanoparticles

In this work a chain of 4000 silver nanoparticles embedded in a glass medium is considered, and its leftmost particle is excited by an electric field pulse of Gaussian shape. Considering Drude’s model, losses of the system are taken into account by γ factor, which stands for the Ohmic losses, and different quantities, such as frequencies of excited modes and group velocities are calculated. Besides, these results are compared to those obtained from the dispersion relation of an infinite chain. The increase of losses affects the lifetime and propagation length of the plasmon; besides, although the response dispersion relation for an infinite chain seems to remain invariable, this is not the case for a finite chain. The mismatches are bigger for higher losses. Furthermore, plasmon propagation velocities are analysed, and an explanation for the mismatch of longitudinal modes close to the intersection point with the dispersion of light is suggested. Finally, some concepts to treat this problem from the energy transport point of view are introduced.

Mono- and polyculture of silver barb (Puntius gonionotus) in deepwater rice systems in Bangladesh

Experiments with fish enclosures were conducted at the Deepwater Rice Farming Systems Research Site at Shuvullah, Mirzapur, Bangladesh. The objective was to study the performance of silver barb (Puntius gonionotus) called Thai sharputi or rajputi in Bangladesh in mono-and-polyculture with grass carp (Ctenopharyngodon idella), common carp (Cyprinus carpio), catla (Catla catla) and rohu (Labeo rohita). Each enclosure measured 21 m x 21 m with an approximate net height of 3.5 m. The stocking densities per cubic meter were 1 fingerling for Thai sharputi monoculture (enclosure 1), and 2 fingerlings for the polyculture systems (enclosure 2 and 3). The species ratio for enclosure 2 was 0.37:0.27:0.02:0.34 (grass carp:Thai sharputi:common carp:catla) and for enclosure 3, 0.4:0.4:0.2 (catla:rohu:Thai sharputi). In monoculture (enclosure 1), Thai sharputi performed well. This relatively good production was mainly attributed to the use of appropriately sized fingerlings and rapid growth from consumption of an abundant supply of azolla in addition to feed given. For the polyculture in enclosure 2, the average weight gain of common carp was the highest (673 g) followed by grass carp (475 g) and Thai sharputi (286 g). For the polyculture in enclosure 3, the length and weight gains for Thai sharputi were almost the same as for the monoculture.

Preliminary results of a silver carp breeding program in Vietnam

The article describes the silver carp (Hypophthalmichthys harmandi and Hypophthalmichthys molitrix) breeding program in Vietnam.

Survey of the lesser silver water beetle Hydrochara caraboides in Cheshire

This is the report on the Survey of the Lesser Silver Water Beetle Hydrochara caraboides in Cheshire 1997 by the English Nature Research Reports. The three surveyed areas were the ponds at Reaseheath, Mickle Trafford and Brookhouse Farm. The report goes through the method of survey and individual results for each location/pond, aspects of the breeding sites considered favourable to Hydrochara caraboides as depth, vegetation, predators and prey species, surrounding land. It comes with suggestions for further work and appendixes. Appendix A contains tabulated lists of plants and invertebrates found in the various ponds, Appendix B shows grid references and a brief description of ponds at Brookhouse Farm, pond diagrams are plotted in Appendix C.

SiO2 coating of silver nanoparticles by photoinduced chemical vapor deposition.

Gas-phase silver nanoparticles were coated with silicon dioxide (SiO2) by photoinduced chemical vapor deposition (photo-CVD). Silver nanoparticles, produced by inert gas condensation, and a SiO2 precursor, tetraethylorthosilicate (TEOS), were exposed to vacuum ultraviolet (VUV) radiation at atmospheric pressure and varying temperatures. The VUV photons dissociate the TEOS precursor, initiating a chemical reaction that forms SiO2 coatings on the particle surfaces. Coating thicknesses were measured for a variety of operation parameters using tandem differential mobility analysis and transmission electron microscopy. The chemical composition of the particle coatings was analyzed using energy dispersive x-ray spectrometry and Fourier transform infrared spectroscopy. The highest purity films were produced at 300-400 degrees C with low flow rates of additional oxygen. The photo-CVD coating technique was shown to effectively coat nanoparticles and limit core particle agglomeration at concentrations up to 10(7) particles cm(-3).