Fases e criticalidade no modelo ashkin - teller de três cores

The usual Ashkin-Teller (AT) model is obtained as a superposition of two Ising models coupled through a four-spin interaction term. In two dimension the AT model displays a line of fixed points along which the exponents vary continuously. On this line the model becomes soluble via a mapping onto the Baxter model. Such richness of multicritical behavior led Grest and Widom to introduce the N-color Ashkin-Teller model (N-AT). Those authors made an extensive analysis of the model thus introduced both in the isotropic as well as in the anisotropic cases by several analytical and computational methods. In the present work we define a more general version of the 3-color Ashkin-Teller model by introducing a 6-spin interaction term. We investigate the corresponding symmetry structure presented by our model in conjunction with an analysis of possible phase diagrams obtained by real space renormalization group techniques. The phase diagram are obtained at finite temperature in the region where the ferromagnetic behavior is predominant. Through the use of the transmissivities concepts we obtain the recursion relations in some periodical as well as aperiodic hierarchical lattices. In a first analysis we initially consider the two-color Ashkin-Teller model in order to obtain some results with could be used as a guide to our main purpose. In the anisotropic case the model was previously studied on the Wheatstone bridge by Claudionor Bezerra in his Master Degree dissertation. By using more appropriated computational resources we obtained isomorphic critical surfaces described in Bezerra's work but not properly identified. Besides, we also analyzed the isotropic version in an aperiodic hierarchical lattice, and we showed how the geometric fluctuations are affected by such aperiodicity and its consequences in the corresponding critical behavior. Those analysis were carried out by the use of appropriated definitions of transmissivities. Finally, we considered the modified 3-AT model with a 6-spin couplings. With the inclusion of such term the model becomes more attractive from the symmetry point of view. For some hierarchical lattices we derived general recursion relations in the anisotropic version of the model (3-AAT), from which case we can obtain the corresponding equations for the isotropic version (3-IAT). The 3-IAT was studied extensively in the whole region where the ferromagnetic couplings are dominant. The fixed points and the respective critical exponents were determined. By analyzing the attraction basins of such fixed points we were able to find the three-parameter phase diagram (temperature £ 4-spin coupling £ 6-spin coupling). We could identify fixed points corresponding to the universality class of Ising and 4- and 8-state Potts model. We also obtained a fixed point which seems to be a sort of reminiscence of a 6-state Potts fixed point as well as a possible indication of the existence of a Baxter line. Some unstable fixed points which do not belong to any aforementioned q-state Potts universality class was also found

Fases magnéticas de sistemas nanoestruturados de terras-raras

There is presently a worldwide interest in artificial magnetic systems which guide research activities in universities and companies. Thin films and multilayers have a central role, revealing new magnetic phases which often lead to breakthroughs and new technology standards, never thought otherwise. Surface and confinement effects cause large impact in the magnetic phases of magnetic materials with bulk spatially periodic patterns. New magnetic phases are expected to form in thin film thicknesses comparable to the length of the intrinsic bulk magnetic unit cell. Helimagnetic materials are prototypes in this respect, since the bulk magnetic phases consist in periodic patterns with the length of the helical pitch. In this thesis we study the magnetic phases of thin rare-earth films, with surfaces oriented along the (002) direction. The thesis includes the investigation of the magnetic phases of thin Dy and Ho films, as well as the thermal hysteresis cycles of Dy thin films. The investigation of the thermal hysteresis cycles of thin Dy films has been done in collaboration with the Laboratory of Magnetic Materials of the University of Texas, at Arlington. The theoretical modeling is based on a self-consistent theory developed by the Group of Magnetism of UFRN. Contributions from the first and second neighbors exchange energy, from the anisotropy energy and the Zeeman energy are calculated in a set of nonequivalent magnetic ions, and the equilibrium magnetic phases, from the Curie temperature up to the Nèel temperature, are determined in a self-consistent manner, resulting in a vanishing torque in the magnetic ions at all planes across the thin film. Our results reproduce the known isothermal and iso-field curves of bulk Dy and Ho, and the known spin-slip phases of Ho, and indicate that: (i) the confinement in thin films leads to a new magnetic phase, with alternate helicity, which leads to the measured thermal hysteresis of Dy ultrathin films, with thicknesses ranging from 4 nm to 16 nm; (ii) thin Dy films have anisotropy dominated surface lock-in phases, with alignment of surface spins along the anisotropy easy axis directions, similar to the known spin-slip phases of Ho ( which form in the bulk and are commensurate to the crystal lattice); and (iii) the confinement in thin films change considerably the spin-slip patterns of Ho.

Efeitos da interação dipolar na nucleação de vórtices em nano-cilindros magnéticos

The effect of confinement on the magnetic structure of vortices of dipolar coupled ferromagnetic nanoelements is an issue of current interest, not only for academic reasons, but also for the potential impact in a number of promising applications. Most applications, such as nano-oscillators for wireless data transmission, benefit from the possibility of tailoring the vortex core magnetic pattern. We report a theoretical study of vortex nucleation in pairs of coaxial iron and Permalloy cylinders, with diameters ranging from 21nm to 150nm, and 12nm and 21nm thicknesses, separated by a non-magnetic layer. 12nm thick iron and Permalloy isolated (single) cylinders do not hold a vortex, and 21nm isolated cylinders hold a vortex. Our results indicate that one may tailor the magnetic structure of the vortices, and the relative chirality, by selecting the thickness of the non-magnetic spacer and the values of the cylinders diameters and thicknesses. Also, the dipolar interaction may induce vortex formation in pairs of 12nm thick nanocylinders and inhibit the formation of vortices in pairs of 21nm thick nanocylinders. These new phases are formed according to the value of the distance between the cylinderes. Furthermore, we show that the preparation route may control relative chirality and polarity of the vortex pair. For instance: by saturating a pair of Fe 81nm diameter, 21nm thickness cylinders, along the crystalline anisotropy direction, a pair of 36nm core diameter vortices, with same chirality and polarity is prepared. By saturating along the perpendicular direction, one prepares a 30nm diameter core vortex pair, with opposite chirality and opposite polarity. We also present a theoretical discussion of the impact of vortices on the thermal hysteresis of a pair of interface biased elliptical iron nanoelements, separated by an ultrathin nonmagnetic insulating layer. We have found that iron nanoelements exchange coupled to a noncompensated NiO substrate, display thermal hysteresis at room temperature, well below the iron Curie temperature. The thermal hysteresis consists in different sequences of magnetic states in the heating and cooling branches of a thermal loop, and originates in the thermal reduction of the interface field, and on the rearrangements of the magnetic structure at high temperatures, 5 produce by the strong dipolar coupling. The width of the thermal hysteresis varies from 500 K to 100 K for lateral dimensions of 125 nm x 65 nm and 145 nm x 65 nm. We focus on the thermal effects on two particular states: the antiparallel state, which has, at low temperatures, the interface biased nanoelement with the magnetization aligned with the interface field and the second nanoelement aligned opposite to the interface field; and in the parallel state, which has both nanoelements with the magnetization aligned with the interface field at low temperatures. We show that the dipolar interaction leads to enhanced thermal stability of the antiparallel state, and reduces the thermal stability of the parallel state. These states are the key phases in the application of pairs of ferromagnetic nanoelements, separated by a thin insulating layer, for tunneling magnetic memory cells. We have found that for a pair of 125nm x 65nm nanoelements, separated by 1.1nm, and low temperature interface field strength of 5.88kOe, the low temperature state (T = 100K) consists of a pair of nearly parallel buckle-states. This low temperature phase is kept with minor changes up to T= 249 K when the magnetization is reduced to 50% of the low temperature value due to nucleation of a vortex centered around the middle of the free surface nanoelement. By further increasing the temperature, there is another small change in the magnetization due to vortex motion. Apart from minor changes in the vortex position, the high temperature vortex state remains stable, in the cooling branch, down to low temperatures. We note that wide loop thermal hysteresis may pose limits on the design of tunneling magnetic memory cells

Influência de fatores individuais e sociais sobre as respostas endócrina e comportamental de callithrix jacchus a desafios ambientais físicos e sociais

Regarding the growing number of human beings with physical and mental pathologies associated to different stressor agents, attempts are being made to validate animal models with a close phylogenetic resemblance to man, to study stress response. Callithrix jacchus has been widely used in biomedical research, including on stress, but there is scarce information in the literature about how individual and social factors modulate stressor response in this species. This study uses 4 approaches to investigate the response of male and female adult C. jacchus, under situations of stress, and in the first we show evidence of the importance of this animal as an experimental model in research involving the hypothalamus-pituitary-adrenal axis. And we investigate if sex and baseline cortisol levels modulate the behavioral and hormonal response to separation. In two additional approaches investigate if type of social support (co-specific parent or non-parent) and social rank interfere in behavioral and hormonal when the animal are exposure to a new environment, paired with a co-specific (F2), exposure of the animal to a new environment, isolated (F3) or during reunion (F4). Finally, we also investigated the androgen levels in the males, with a focus on the challenge hypothesis, referring to environmental responsiveness and male-male exposure to relatives and non-relatives of C. jacchus. It was observed that: (1) the baseline cortisol of the animal is predictive of cortisol reactivity at separation; (2) males and females do not show dimorphism in the response of cortisol to stressors, although the females have higher baseline levels of this hormone and exhibit higher frequencies of anxiety-related behaviors; (3) only social support provided by relatives proved to be effective in buffering the cortisol response. In behavioral terms this response was dimorphic, showing that only the male dyads displayed an attenuated response to stress; (4) the males showed differences in cortisol levels as a function of social rank and study phases, whereas in the females no such alterations were observed. The males with indefinite dominance hierarchy (IDH) had reduced cortisol in F2 and F4, while the IDH females showed an increase in F3 and F4; (5) the males of relative and non-relative dyads did not exhibit variations in androgen levels as a function of a new environment. These results, taken together, (a) corroborate the use of C. jacchus as a good animal model for stress-related studies, given that they exhibit similar behavioral and physiological alterations to those of human beings in response to stressor agents; (b) point to the importance of considering individual and social modulating factors during experiments with stressors; (c) provide more reliable comparison parameters in studies where these primates are used as animal models, and (d) show that androgens vary as a function of genetic proximity (relative or non-relative) when the animals are faced with physical and social environmental challenges, thus providing important information for studying the challenge hypothesis in this species

Caracterização comportamental endócrina das fases ontogenéticas de sagüi comum (Callithrix jacchus)

The use of animal models in biomedical research is ever increasing. Models that use primates might also have advantages in terms of low maintenance costs and availability of biological knowledge, thereby favoring their use in different experimental protocols. Many current stress studies use animal models at different developmental stages since biological response differs during ontogeny. The aims of this study were to perform a detailed characterization of the developmental stages of common marmosets (Callithrix jacchus), a very important animal model used in biomedical research. Ten subjects, 6 females and 4 males, were followed from birth to initial adult age (16 months). Behavioral and fecal collection for measurement of adrenal (cortisol) and sex (progesterone, estradiol and androgens) hormones took place twice a week during the first month of life and once a week for the remainder of the study. Behavior was observed for 30 minutes in the morning (0700-09:00h) and afternoon (12:00-14:00h). Behavioral profile showed changes during ontogeny, characterizing the 4 developmental stages and the respective phases proposed by Leão et al (2009).. Differentiation of developmental stages was considered using the onset, end, change and stabilization of the behavioral profile parental care (weaning and carrying), ingestion (solid food), affiliation (social grooming) and autogrooming, agonism (scent marking and piloerection) and play behavior and endocrine profile. Infant weaning and carrying terminated within the infantile stage and the peak of solid food ingestion was recorded in the infantile III phase. Receiving grooming was recorded earlier than grooming performed by the infant and autogrooming. The first episode of scent marking was recorded in the 4th week and it was the least variable behavior, in terms of its onset, which, in almost all animals, was between the 5th and 7th week of life. Solitary play and play with the twin started around the 7th week and play with other members of the group started 8 weeks later. Sex hormone secretion started to differ from basal levels between the 21st and 23rd week of life, in males and females, suggesting that puberty occurs simultaneously in both sexes. Basal cortisol, even at an early age, was higher in females than in males. However, cortisol was not correlated with the juvenile stage, as expected, since this stage corresponds to the transition between infancy and adult age and most behaviors are intensified by this time. The behavioral and endocrine profile of subadult animals did not differ from that of the adults. These results provide more detailed parameters for the developmental process of C. jacchus and open new perspectives for the use of experimental approaches focused on the intermediate ontogenetic phases of this species

Investigação da memória autobiográfica em idosos com demência de Alzheimer nas fases leve e moderada

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Remoção, por flotação, de óleo em águas produzidas na indústria de petróleo: eficiência e modelagem do processo

The separation oil-water by the use of flotation process is characterized by the involvement between the liquid and gas phases. For the comprehension of this process, it s necessary to analyze the physical and chemical properties command float flotation, defining the nature and forces over the particles. The interface chemistry has an important role on the flotation technology once, by dispersion of a gas phase into a liquid mixture the particles desired get stuck into air bubbles, being conduced to a superficial layer where can be physically separated. Through the study of interface interaction involved in the system used for this work, was possible to apply the results in an mathematical model able to determine the probability of flotation using a different view related to petroleum emulsions such as oil-water. The terms of probability of flotation correlate the collision and addition between particles of oil and air bubbles, that as more collisions, better is the probability of flotation. The additional probability was analyzed by the isotherm of absorption from Freundlich, represents itself the add probability between air bubbles and oil particles. The mathematical scheme for float flotation involved the injected air flow, the size of bubbles and quantity for second, the volume of float cell, viscosity of environment and concentration of demulsifier. The results shown that the float agent developed by castor oil, pos pH variation, salt quantity, temperature, concentration and water-oil quantity, presented efficient extraction of oil from water, up to 95%, using concentrations around 11 ppm of demulsifier. The best results were compared to other commercial products, codified by ―W‖ and ―Z‖, being observed an equivalent demulsifier power between Agflot and commercial product ―W‖ and superior to commercial product ―Z‖

Síntese e caracterização de membranas zeolíticas tipo mfi e aplicação em separação de aromáticos

The synthesis of MFI-type zeolite membranes was carried by the process in situ or hydrothermal crystallization. We studied the homogenization time of the room temperature and gel filtration just before the crystallization step performed out in an oven, thus obtaining a more uniform zeolite film. The powder synthesized zeolite (structure type MFI, Silicalite) was characterized by several complementary techniques such as Xray diffraction (XRD), scanning electron microscopy (SEM), thermal analysis, temperature programmed desorption (TPD), Fourier Transform infrared spectroscopy (FTIR) and textural analysis by nitrogen adsorption (specific surface area). For the purpose of evaluating the quality of the layer supported on the ceramic support, N2 permeation tests were carried starting from room temperature to 600 °C, where values were observed values more appropriate permeation from 200 °C. With the data obtained, it was made into a graph of temperature versus permeation function, the curve of surface diffusion was found. For scanning electron microscopy, we observed the formation of homogeneous crystals and the zeolite film showed no fissures or cracks, indicating that the process of synthesis and subsequent treatments not damaged the zeolite layer on the support. Carried permeation studies were found values ranging from 3.64x10-6 to 3.78x10-6, 4.71x10-6 to 5.02x10-6, to pressures 20 and 25 psi, respectively. And the mixture xylenes/N2 values were between 5.39x10-6 to 5.67x10-6 and 8.13x10-6 to 8.36x10-6, also for pressures of 20 and 25 psi. The values found for the separation factor were 15.22 at 400 °C in the first experiment and 1.64 for the second experiment at a temperature of 150 °C. It is concluded that the Silicalite membrane was successfully synthesized and that it is effective in the separation of binary mixtures of xylenes

Anestesia para separação de gêmeos isquiópagos no período neonatal: relato de caso

JUSTIFICATIVA E OBJETIVOS: A separação de gêmeos unidos causa grande interesse devido à complexidade da anestesia e cirurgia, à raridade da patologia e às poucas chances de sobrevida. O objetivo desta descrição é o de contribuir para a literatura existente, relatando os desafios encontrados por nossa equipe no atendimento à cirurgia-anestesia de separação de gêmeos isquiópagos. RELATO do CASO: Pacientes gêmeos, nascidos a termo, de parto cesariano, pesando juntos 5.100 g, classificados como isquiópagus tetrapus. Duas equipes anestésico-cirúrgicas estavam presentes, sendo o procedimento anestésico esquematizado com aparelho de anestesia, cardioscópio, capnógrafo, oxímetro de pulso, termômetro elétrico, estetoscópio esofágico, todos em dobro. Realizou-se indução anestésica com halotano e fentanil, com os gêmeos em posição lateral e com rotação da cabeça em 45º para facilitar a intubação traqueal. Os recém-nascidos foram mantidos em ventilação controlada manualmente, utilizando o sistema de Rees-Baraka. A anestesia foi mantida com halotano, oxigênio e fentanil. Durante o per-operatório, foram encontrados órgãos abdominais duplos, com exceção do cólon, que era único. As bexigas e os ísquios estavam ligados. Ao final da cirurgia as duas crianças apresentavam-se com sinais vitais estáveis. Os gêmeos permaneceram na Unidade de Terapia Intensiva (UTI) Neonatal por quatro semanas e receberam alta em bom estado geral. CONCLUSÕES: Ressalta-se a importância do entrosamento da equipe, do estudo retrospectivo multidisciplinar, da monitorização adequada e acurada observação clínica; todos esses fatores contribuíram para a boa evolução e alta dos gêmeos.

CrossMDA-SPL: uma abordagem para gerência de variabilidades dirigida por modelos e aspectos

This paper proposes a systematic approach to management of variability modelsdriven and aspects using the mechanisms of approaches Aspect-Oriented Software Development (AOSD) and Model-Driven Development (MDD). The main goal of the approach, named CrossMDA-SPL, is to improve the management(gerência), modularization and isolation ou separation of the variability of the LPSs of architecture in a high level of abstraction (model) at the design and implementing phases of development Software Product Lines (SPLs), exploiting the synergy between AOSD and MDD. The CrossMDA-SPL approach defines some artifacts basis for advance the separation clear in between the mandatory (bounden) and optional features in the architecture of SPL. The artifacts are represented by two models named: (i) core model (base domain) - responsible for specify the common features the all members of the SPL, and (ii) variability model - responsible for represent the variables features of SPL. In addition, the CrossMDA-SPL approach is composed of: (i) guidelines for modeling and representation of variability, (ii) CrossMDA-SPL services and process, and (iii) models of the architecture of SPL or product instance of SPL. The guidelines use the advantages of AOSD and MDD to promote a better modularization of the variable features of the architecture of SPL during the creation of core and variability models of the approach. The services and sub-processes are responsible for combination automatically, through of process of transformation between the core and variability models, and the generation of new models that represent the implementation of the architecture of SPL or a instance model of SPL. Mechanisms for effective modularization of variability for architectures of SPL at model level. The concepts are described and measured with the execution of a case study of an SPL for management systems of transport electronic tickets

Identificando interesses transversais em modelos de requisitos PL-AOVgraph

The occurrence of problems related to the scattering and tangling phenomenon, such as the difficulty to do system maintenance, increasingly frequent. One way to solve this problem is related to the crosscutting concerns identification. To maximize its benefits, the identification must be performed from early stages of development process, but some works have reported that this has not been done in most of cases, making the system development susceptible to the errors incidence and prone to the refactoring later. This situation affects directly to the quality and cost of the system. PL-AOVgraph is a goal-oriented requirements modeling language which offers support to the relationships representation among requirements and provides separation of crosscutting concerns by crosscutting relationships representation. Therefore, this work presents a semi-automatic method to crosscutting concern identification in requirements specifications written in PL-AOVgraph. An adjacency matrix is used to identify the contributions relationships among the elements. The crosscutting concern identification is based in fan-out analysis of contribution relationships from the informations of adjacency matrix. When identified, the crosscutting relationships are created. And also, this method is implemented as a new module of ReqSys-MDD tool

Identificação e comparação entre controle preditivo com modelo não linear e PI sintonizados com PSO em sistema de separação gravitacional de águia-óleo

The separation methods are reduced applications as a result of the operational costs, the low output and the long time to separate the uids. But, these treatment methods are important because of the need for extraction of unwanted contaminants in the oil production. The water and the concentration of oil in water should be minimal (around 40 to 20 ppm) in order to take it to the sea. Because of the need of primary treatment, the objective of this project is to study and implement algorithms for identification of polynomial NARX (Nonlinear Auto-Regressive with Exogenous Input) models in closed loop, implement a structural identification, and compare strategies using PI control and updated on-line NARX predictive models on a combination of three-phase separator in series with three hydro cyclones batteries. The main goal of this project is to: obtain an optimized process of phase separation that will regulate the system, even in the presence of oil gushes; Show that it is possible to get optimized tunings for controllers analyzing the mesh as a whole, and evaluate and compare the strategies of PI and predictive control applied to the process. To accomplish these goals a simulator was used to represent the three phase separator and hydro cyclones. Algorithms were developed for system identification (NARX) using RLS(Recursive Least Square), along with methods for structure models detection. Predictive Control Algorithms were also implemented with NARX model updated on-line, and optimization algorithms using PSO (Particle Swarm Optimization). This project ends with a comparison of results obtained from the use of PI and predictive controllers (both with optimal state through the algorithm of cloud particles) in the simulated system. Thus, concluding that the performed optimizations make the system less sensitive to external perturbations and when optimized, the two controllers show similar results with the assessment of predictive control somewhat less sensitive to disturbances

As relações entre tectonismo e seqüências deposiconais no rifte potiguar - porção SW do Graben de Umbuzeiro, bacia potiguar emersa

Through an integrated approach, using litho, chrono and biostratigraphic data, the relative importance of climate variations and tectonics were recognized in rift sediments of the onshore Potiguar Basin, Northeast Brazil. Concepts of sequence stratigraphy were applied as a template to integrate sedimentological and geochemical data (oxygen isotopes), as well as quantitative palynologic methods to address and recognize the main depositional patterns produced in a rift basin. The main objective was to address the relative importance of climate changes and tectonics to the resultant stratigraphic architecture. The results of computer simulations of sedimentary basin fills of rift basins were quite useful to test working hypothesis and mimic the process of filling a half graben during a rift event. The studied section includes a neovalanginian-eobarremian (Lower Cretaceous) rift interval from the Pendência Formation, located in the southwestern portion of Umbuzeiro Graben, in the offshore Potiguar Basin. The depositional setting is interpreted as progradational deltaic system entering a lake from its flexural margin. Sismoestratigraphyc and well logs analyses allowed to interpret two regressive intervals (Green and Yellow Sequences), separated by a broad transgressive interval (Orange Sequence), known as the Livramento Shale. The depositional history encompass three stages: two tectonically active phases, during the deposition of the Green and Yellow Sequences, and a tectonically quiescent phase, during the deposition of the Orange Sequence. Paleoclimatic interpretation, based on quantitative palynology and geochemical data (��18O), suggests a tendency to arid conditions during the tectonically active phases and wet conditions during the tectonically quiescent phase. Stratigraphic modeling and backstripping techniques, supported by paleoclimatic/paleoecologic interpretations provide a powerful methodology to evaluate the tectonic and climatic controls on tectonic lakes

Efeito da densidade na gaiola sobre o desempenho de poedeiras comerciais nas fases de cria, recria e produção

Um experimento foi realizado para se avaliar a influência das densidades da gaiola sobre o desempenho de poedeiras semi-pesadas em diferentes fases de criação (cria, recria e produção) e pesquisar seus efeitos sobre o desempenho das aves na fase seguinte. Na fase de cria (0 a 6 semanas), 804 pintinhas da linhagem Isa Brown foram distribuídas em gaiolas medindo 100 x 80 x 35 cm, em delineamento experimental inteiramente casualizado, com quatro tratamentos (29, 32, 35 e 38 aves por gaiola ou 275,86; 250,00; 228,57 e 210,52 cm²/ave) e quatro repetições por tratamento. Não houve diferenças significativas para ganho de peso, consumo de ração, conversão alimentar e uniformidade nas densidades utilizadas na fase de cria. Na fase de recria (6 a 16 semanas), foram utilizadas 720 aves, alojadas em gaiolas medindo 100 x 50 x 50 cm, em delineamento experimental inteiramente casualizado, com 12 tratamentos, distribuídos em esquema fatorial 4 x 3 (densidades na fases de cria e recria), correspondendo a 10, 12 e 14 aves por gaiola, ou seja, 500,00; 416,67 ou 357,14 cm²/ave, com quatro repetições. Não foram observadas diferenças significativas para ganho de peso, consumo de ração, conversão alimentar e uniformidade nas densidades utilizadas nesta fase. Na fase de produção, 540 aves foram alojadas em gaiolas com dimensões de 100 x 45 x 45 cm, em delineamento inteiramente ao acaso, com nove tratamentos, distribuídos em esquema fatorial 3 x 3 (densidades na recria e na produção), com 8, 10 e 12 aves por gaiola, correspondendo a 562,15; 450,00 e 375,00 cm²/ ave, com cinco repetições. Observaram-se efeitos significativos da densidade na gaiola apenas para peso dos ovos e consumo de ração. Para as condições de realização desta pesquisa, pode-se afirmar que as densidades utilizadas nas três fases de criação não prejudicaram os parâmetros de produção estudados.

Detecção do Southern bean mosaic virus no Paraná, e separação do Bean rugose mosaic virus em feijoeiro

Em lavouras de feijoeiro (Phaseolus vulgaris) da cultivar Carioca Comum, no município de Londrina, Estado do Paraná, foram encontradas plantas com sintomas de necrose da haste, mosaico clorótico leve e porte reduzido, semelhantes aos sintomas causados por infecção viral. Exames de microscopia eletrônica revelaram a presença de partículas isométricas. em testes de imunodifusão dupla em gel de ágar os extratos foliares de plantas infetadas reagiram positivamente com anti-soro específico para o Southern bean mosaic virus (SBMV). O vírus foi purificado e a massa molecular de sua proteína capsidial foi estimada em 30 kDa, valor esperado para proteínas do capsídeo de vírus do gênero Sobemovirus. A gama de hospedeiras do SBMV isolado no Paraná foi restrita ao feijoeiro e a algumas cultivares de soja (Glycine max). A separação de dois vírus isométricos comuns em infecções mistas no feijoeiro foi possível através da reação de imunidade ao SBMV apresentada por Crotalaria sp, Chenopodium quinoa e Mucuna deeringiana, e da reação de susceptibilidade dessas mesmas hospedeiras ao Bean rugose mosaic virus (BRMV).