The use of learning management systems: A Longitudinal Case Study

In this article the use of Learning Management Systems (LMS) at the School of Engineering, University of Borås, in the year 2004 and the academic year 2009-2010 is investigated. The tools in the LMS were classified into four groups (tools for distribution, tools for communication, tools for interaction and tools for course administration) and the pattern of use was analyzed. The preliminary interpretation of the results was discussed with a group of teachers from the School of Engineering with long experience of using LMS. High expectations about LMS as a tool to facilitate flexible education, student centered methods and the creation of an effective learning environment is abundant in the literature. This study, however, shows that in most of the surveyed courses the available LMS is predominantly used to distribute documents to students. The authors argue that a more elaborate use of LMS and a transformation of pedagogical practices towards social constructivist, learner centered procedures should be treated as an integrated process of professional development.

Barriers to a wider Implementation of LMS in Higher Education: a Swedish case study, 2006-2011

This article investigates barriers to a wider utilization of a Learning Management System (LMS). The study aims to identify the reasons why some tools in the LMS are rarely used, in spite of assertions that the learning experience and students’ performance can be improved by interaction and collaboration, facilitated by the LMS. Lecturers’ perceptions about the use of LMSs over the last four years at the School of Engineering, University of Borås were investigated. Seventeen lecturers who were interviewed in 2006 were interviewed again in 2011. The lecturers’ still use the LMS primarily for distribution of documents and course administration. The results indicate that their attitudes have not changed significantly. The apparent reluctance to utilize interactive features in the LMS is analyzed, by looking at the expected impact on the lecturers’ work situation. The author argues that the main barrier to a wider utilization of LMS is the lecturers’ fear of additional demands on their time. Hence, if educational institutions want a wider utilization of LMS, some kind of incentives for lecturers are needed, in addition to support and training.

Ontologies and Methods for Interoperability of Engineering Analysis Models (EAMS) in an E-Design Environment

ABSTRACT ONTOLOGIES AND METHODS FOR INTEROPERABILITY OF ENGINEERING ANALYSIS MODELS (EAMS) IN AN E-DESIGN ENVIRONMENT SEPTEMBER 2007 NEELIMA KANURI, B.S., BIRLA INSTITUTE OF TECHNOLOGY AND SCIENCES PILANI INDIA M.S., UNIVERSITY OF MASSACHUSETTS AMHERST Directed by: Professor Ian Grosse Interoperability is the ability of two or more systems to exchange and reuse information efficiently. This thesis presents new techniques for interoperating engineering tools using ontologies as the basis for representing, visualizing, reasoning about, and securely exchanging abstract engineering knowledge between software systems. The specific engineering domain that is the primary focus of this report is the modeling knowledge associated with the development of engineering analysis models (EAMs). This abstract modeling knowledge has been used to support integration of analysis and optimization tools in iSIGHT FD , a commercial engineering environment. ANSYS , a commercial FEA tool, has been wrapped as an analysis service available inside of iSIGHT-FD. Engineering analysis modeling (EAM) ontology has been developed and instantiated to form a knowledge base for representing analysis modeling knowledge. The instances of the knowledge base are the analysis models of real world applications. To illustrate how abstract modeling knowledge can be exploited for useful purposes, a cantilever I-Beam design optimization problem has been used as a test bed proof-of-concept application. Two distinct finite element models of the I-beam are available to analyze a given beam design- a beam-element finite element model with potentially lower accuracy but significantly reduced computational costs and a high fidelity, high cost, shell-element finite element model. The goal is to obtain an optimized I-beam design at minimum computational expense. An intelligent KB tool was developed and implemented in FiPER . This tool reasons about the modeling knowledge to intelligently shift between the beam and the shell element models during an optimization process to select the best analysis model for a given optimization design state. In addition to improved interoperability and design optimization, methods are developed and presented that demonstrate the ability to operate on ontological knowledge bases to perform important engineering tasks. One such method is the automatic technical report generation method which converts the modeling knowledge associated with an analysis model to a flat technical report. The second method is a secure knowledge sharing method which allocates permissions to portions of knowledge to control knowledge access and sharing. Both the methods acting together enable recipient specific fine grain controlled knowledge viewing and sharing in an engineering workflow integration environment, such as iSIGHT-FD. These methods together play a very efficient role in reducing the large scale inefficiencies existing in current product design and development cycles due to poor knowledge sharing and reuse between people and software engineering tools. This work is a significant advance in both understanding and application of integration of knowledge in a distributed engineering design framework.

Podcasting and the use of portable music/video players at the School of Nursing

Introduction As students become more connected with the internet and other current technologies, the school of nursing has continued to investigate more innovative, meaningful, and effective uses of technology. One particular technology whose use has increased is the portable music/video player. Like the cell phone, mp3 players and iPods have become a standard accessory for students. To capitalize on this popular technology the School has started several pilot projects involving podcasting under graduate and graduate nursing classes and has also been involved in one research project using video iPods. [See PDF for complete abstract]

Report on the practice based culminating experience as teaching assistant for "Pathology and Public Health" class taught at University of Texas School of Public Health, Houston

Objectives. The objectives of this report were to describe current best standards in online education, class competencies, class objectives, class activities and to compare the class competencies, objectives and activities undertaken with the current best practices in online teaching and to provide a list of recommendations based on the most efficacious practices. ^ Methods. Utilizing the key words- online teaching, national standards, quality, online courses, I: (1) conducted a search on Google to find the best standard for quality online courses; the search yielded National Standards for Quality Online Teaching as the gold standard in online course quality; (2) specified class objectives and competencies as well as major activities undertaken as a part of the class. Utilizing the Southern Regional Education Board evaluation checklist for online courses, I: (1) performed an analysis comparing the class activities, objectives, and competencies with the current best standards; (2) utilized the information obtained from the analysis and class experiences to develop recommendations for the most efficacious online teaching practices. ^ Results. The class met the criteria set by the Southern Regional Education Board for evaluating online classes completely in 75%, partially in 16% and did not meet the criteria in 9% cases. The majority of the parameters in which the class did not meet the standards (4 of 5) were due to technological reasons beyond the scope of the class instructor, teaching assistant and instructional design. ^ Discussion. Successful online teaching requires awareness of technology, good communication, methods, collaboration, reflection and flexibility. Creation of an online community, engaging online learners and utilizing different learning styles and assessment methods promote learning. My report proposes that online teaching should actively engage the students and teachers with multiple interactive strategies as evidenced from current best standards of online education and my “hands-on” work experience. ^ Conclusion. The report and the ideas presented are intended to create a foundation for efficacious practice on the online teaching platform. By following many of the efficacious online practices described in the report and adding from their own experiences, online instructors and teaching assistants can contribute to effective online learning. ^

OJS Implementation and development of the Scientific Journals Site of the School of Humanities and Education Sciences at the Universidad Nacional de La Plata

Este trabajo tiene como objetivo describir la experiencia de implementación y desarrollo del Portal de revistas de la Facultad de Humanidades y Ciencias de Educación de la Universidad Nacional de La Plata a fin de que pueda ser aprovechada por todos aquellos que emprendan iniciativas de características similares. Para ello, se realiza en primer lugar un repaso por la trayectoria de la Facultad respecto a la edición de revistas científicas y la labor bibliotecaria para contribuir a su visualización. En segundo orden, se exponen las tareas llevadas adelante por la Prosecretaría de Gestión Editorial y Difusión (PGEyD) de la Facultad para concretar la puesta en marcha del portal. Se hace especial referencia a la personalización del software, a la metodología utilizada para la carga masiva de información en el sistema (usuarios y números retrospectivos) y a los procedimientos que permiten la inclusión en repositorio institucional y en el catálogo web de todos los contenidos del portal de manera semi-automática. Luego, se hace alusión al trabajo que se está realizando en relación al soporte y a la capacitación de los editores. Se exponen, después, los resultados conseguidos hasta el momento en un año de trabajo: creación de 10 revistas, migración de 4 títulos completos e inclusión del 25de las contribuciones publicadas en las revistas editadas por la FaHCE. A modo de cierre se enuncian una serie de desafíos que la Prosecretaría se ha propuesto para mejorar el Portal y optimizar los flujos de trabajo intra e interinstitucionales

OJS Implementation and development of the Scientific Journals Site of the School of Humanities and Education Sciences at the Universidad Nacional de La Plata

Este trabajo tiene como objetivo describir la experiencia de implementación y desarrollo del Portal de revistas de la Facultad de Humanidades y Ciencias de Educación de la Universidad Nacional de La Plata a fin de que pueda ser aprovechada por todos aquellos que emprendan iniciativas de características similares. Para ello, se realiza en primer lugar un repaso por la trayectoria de la Facultad respecto a la edición de revistas científicas y la labor bibliotecaria para contribuir a su visualización. En segundo orden, se exponen las tareas llevadas adelante por la Prosecretaría de Gestión Editorial y Difusión (PGEyD) de la Facultad para concretar la puesta en marcha del portal. Se hace especial referencia a la personalización del software, a la metodología utilizada para la carga masiva de información en el sistema (usuarios y números retrospectivos) y a los procedimientos que permiten la inclusión en repositorio institucional y en el catálogo web de todos los contenidos del portal de manera semi-automática. Luego, se hace alusión al trabajo que se está realizando en relación al soporte y a la capacitación de los editores. Se exponen, después, los resultados conseguidos hasta el momento en un año de trabajo: creación de 10 revistas, migración de 4 títulos completos e inclusión del 25de las contribuciones publicadas en las revistas editadas por la FaHCE. A modo de cierre se enuncian una serie de desafíos que la Prosecretaría se ha propuesto para mejorar el Portal y optimizar los flujos de trabajo intra e interinstitucionales

OJS Implementation and development of the Scientific Journals Site of the School of Humanities and Education Sciences at the Universidad Nacional de La Plata

Este trabajo tiene como objetivo describir la experiencia de implementación y desarrollo del Portal de revistas de la Facultad de Humanidades y Ciencias de Educación de la Universidad Nacional de La Plata a fin de que pueda ser aprovechada por todos aquellos que emprendan iniciativas de características similares. Para ello, se realiza en primer lugar un repaso por la trayectoria de la Facultad respecto a la edición de revistas científicas y la labor bibliotecaria para contribuir a su visualización. En segundo orden, se exponen las tareas llevadas adelante por la Prosecretaría de Gestión Editorial y Difusión (PGEyD) de la Facultad para concretar la puesta en marcha del portal. Se hace especial referencia a la personalización del software, a la metodología utilizada para la carga masiva de información en el sistema (usuarios y números retrospectivos) y a los procedimientos que permiten la inclusión en repositorio institucional y en el catálogo web de todos los contenidos del portal de manera semi-automática. Luego, se hace alusión al trabajo que se está realizando en relación al soporte y a la capacitación de los editores. Se exponen, después, los resultados conseguidos hasta el momento en un año de trabajo: creación de 10 revistas, migración de 4 títulos completos e inclusión del 25de las contribuciones publicadas en las revistas editadas por la FaHCE. A modo de cierre se enuncian una serie de desafíos que la Prosecretaría se ha propuesto para mejorar el Portal y optimizar los flujos de trabajo intra e interinstitucionales

Recovery of traditional mortars in the laboratory of materials at the school of architectura of Madrid

The Laboratory of Materials seminar is an optional course offered to students in the School of Architecture in Madrid. It is taught during 35 class hours in the laboratory of materials distributed in two hours and forty minutes weekly. One of the working lines is the preparation of traditional mortars made by students groups, each one of 4 or 5 members. It is basically a practical course, and students have to prepare a group of tests pieces in order to confirm the initial hypothesis, or when needed, make innovations. The test pieces are of 150mmx150mmx10mm and applied to big size hollow bricks, prismatic test pieces of 40mmx40mmx160mm to apply physical and mechanical tests and brick wallings of varied dimensions.

Strengthening communication skills in an innovative context of engineering project management learning

This document presents an innovative, formal educational initiative that is aimed at enhancing the development of engineering students’ specific competences when studying Project Management (PM) subject. The framework of the experience combines (1) theoretical concepts, (2) the development of a real-case project carried out by multidisciplinary groups of three different universities, (3) the use of software web 2.0 tools and (4) group and individual assignments of students that play different roles (project managers and team members). Under this scenario, the study focuses on monitoring the communication competence in the ever growing PM virtual environment. Factors such as corporal language, technical means, stage, and PM specific vocabulary among others have been considered in order to assess the students’ performance on this issue. As a main contribution, the paper introduces an ad-hoc rubric that, based on previous investigations, has been adapted and tested for the first time to this new and specific context. Additionally, the research conducted has provided some interesting findings that suggest further actions to improve and better define future rubrics, oriented to communication or even other competences. As specific PM subject concerns, it has been detected that students playing the role of Project Managers strengthen their competences more than those ones that play the role of Team Members. It has also been detected that students have more difficulty assimilating concepts related to risk and quality management. However those concepts related with scope, time or cost areas of knowledge have been better assimilated by the students.

Balanced scorecard to improve strategic management control at School of Mines and Energy, Universidad Politécnica de Madrid

We studied the situation in Spanish public universities regarding the use of the Balanced Scorecard (BSC), as an instrument of control and strategic management. Also, we studied its application to the School of Mines and Energy at Universidad Politécnica de Madrid. The main advantage of the BSC is that improves the organizational structure of the workplace and the achievement of the objectives that ensure long-term success. First we review the strategy for success used in the Spanish educational system and specifically in the Spanish public universities. Then using the BSC and applying the main strategic lines for the successful management of the School of Mines and Energy at Universidad Politécnica de Madrid. The strategic lines affect all the college groups and the success of the BSC tool is to increase communication between the faculties, personal auxiliary, students and society in general that make up the university. First we performed a SWOT analysis (DAFO in Spanish) there are proposed different perspectives that focus the long-term strategic objectives. The BSC is designed based on the strategic objectives that set the direction through using indicators and initiatives, the goals are achieved up to the programmed schedule. In the perspective of teaching, objectives are set to update facilities and increase partnerships with other universities and businesses, encouraging ongoing training of staff and improved coordination and internal communication. The internal process perspective aims at improving the marketing, the promotion of the international dimension of the school through strategic alliances, better mobility for students and professors and improved teaching and research quality results. It continues with improving the image of the school between customer?s perspective, the quality perceived by students and the loyalty of the teaching staff by retaining talent. Finally, the financial perspective which should contain costs without harming the quality, improving the employability of students and achieve relevant jobs at teaching and research through international measurement standards.

Reason and Being of Engineering Geology

This paper demonstrates the importance of a holistic comprehension of the Earth like a planet that is alive, not only in its Biosphere, looking at the atmosphere-ocean-crust-mantle interactions as its different sectorial expressions (climate, fluid-dynamics, morpho-dynamics, tectonics…) following the solar radiation and nuclear geothermal sources of energy. It considers the environmental incidence of different engineering activities to realize their underfeeding as the raison, and leads to that holistic formation as the being of the engineering geology

Relevance evaluation of engineering masters program in Peru

In a context of mass higher education, it is necessary to ensure not only quality but also the relevance of engineering master's programs, namely the appropriateness of the objectives and outcomes to the needs and interests of the program beneficiaries. After a literature review we analyzed the evaluation models of three organizations in Peru: the Board of Evaluation, Accreditation and Certification of the University Education Quality CONEAU, the Institute of Quality and Accreditation of Computing, Engineering and Technology - ICACIT and the Pontificia Universidad Catolica del Peru. The result of this study is a model for relevance evaluation for an engineering master¿s program in Peru.