Efecto de la densidad poblacional y la época de siembra en el rendimiento y la calidad de la semilla de una población de caupi rojo (Vigna unguiculata (L.) Walp) en la Finca El Plantel

El presente ensayo se realizó en la Finca El Plantel, Zambrano, departamento de Masaya, Nicaragua durante las épocas de siembra de primera, postrera y de riego (Junio 2005-Marzo 2006) con el objetivo de determinar el efecto de la densidad poblacional y la época de siembra sobre el rendimiento y la calidad de semilla de una población de caupí rojo. Fue establecido un diseño bifactorial de bloques completos al azar (BCA), con cuatro bloques, cinco distancias de siembra (0.40, 0.60, 0.80, 1.00, 1.20) y tres épocas de siembra. Se realizó el análisis de varianza y separación de medias por Tukey al 5% de confianza, utilizando el programa Statistical Analysis System (SAS). La medición de las variables se basó en el descriptor de Vignas sp y en la tabla de colores de Methuen. Las variables cuantitativas medidas fueron longitud del foliolo central, longitud del pecíolo, longitud del pecíolulo, longitud del pedúnculo de la vaina, longitud de la rama, longitud de la vaina, diámetro del tallo, altura de la planta, número de ramas por planta, contenido de humedad de la semilla, materia seca, germinación, número de semilla por vainas, número de vainas por parcela, peso de 1000 semillas, y rendimiento. De acuerdo con los resultados no se encontró interacción entre épocas y distancias de siembra. Se determinó que hubo efecto entre épocas de siembra sobre las variables medidas a excepción de número de ramas y diámetro del tallo. El mayor rendimiento se obtuvo en postrera con 1228.8 kg.ha-1, seguida de riego con 452.8 kg.ha-1 y primera 361.6kgha-1. La siembra con riego presentó el primer lugar en las variables peso de 1000 semillas (146.0 g), materia seca (1.8 g) y germinación (87.2 %). Respecto a distancia de siembra la variable número de vainas por parcela presentó efecto significativo correspondiente a la distancia de 1.20m con 406 vainas. De acuerdo a estos resultados se puede decir que la mejor época para producir semilla de caupí es riego por la calidad alcanzada de este insumo.

Caracterización y evaluación preliminar de 14 accesiones de Chile (Capsicum spp)

La presente investigación se llevó a cabo en el Programa de Recursos Genéticos Nicaragüenses (REGEN) de la Universidad Nacional Agraria, durante el período Octubre 2002-Abril-2003. El objetivo fue estudiar y evaluar gennoplasma nativo e introducido de chile {Capsicum spp.) en condiciones del trópico seco de Nicaragua. La caracterización de las 14 accesiones en base a la guía de descriptores propuesta por IBPGR (lt¡83) y mediante el análisis estadístico univariado y multivariados permitió identificar los principales descriptores cualitatí vos ( fonna del fruto, pungencía y forma del fruto en la unión con el pedúnculo) y cuantitativos (diámetro de semillas, diámetro del fruto y peso del fruto) que son de gran utilidad para el estudio de la variación genética de chile. Además se logró conformar un catálogo con las características de cada uno de los material.es. Las accesiones de mayor variación fueron Bacatum, Diente de perro, Pico de pájaro, Alfilerillo y Chile ancho. El resto de materiales tienen características más uniformes. Las accesiones evaluadas presentaron características morfológicas propias de las especies C. annuum, C. frutescens y C. baccatum. En el germopla.sma de Capsicum evaluado se encontraron materiales que poseen diferente reacción a plagas y enfermedades. Palabras claves: Capsicum; accesión; germoplasma; descriptor.

Small scale, grain size and substrate effects in nano-indentation experiment of film-substrate systems

The mechanical properties of film-substrate systems have been investigated through nano-indentation experiments in our former paper (Chen, S.H., Liu, L., Wang, T.C., 2005. Investigation of the mechanical properties of thin films by nano-indentation, considering the effects of thickness and different coating-substrate combinations. Surf. Coat. Technol., 191, 25-32), in which Al-Glass with three different film thicknesses are adopted and it is found that the relation between the hardness H and normalized indentation depth h/t, where t denotes the film thickness, exhibits three different regimes: (i) the hardness decreases obviously with increasing indentation depth; (ii) then, the hardness keeps an almost constant value in the range of 0.1-0.7 of the normalized indentation depth h/t; (iii) after that, the hardness increases with increasing indentation depth. In this paper, the indentation image is further investigated and finite element method is used to analyze the nano-indentation phenomena with both classical plasticity and strain gradient plasticity theories. Not only the case with an ideal sharp indenter tip but also that with a round one is considered in both theories. Finally, we find that the classical plasticity theory can not predict the experimental results, even considering the indenter tip curvature. However, the strain gradient plasticity theory can describe the experimental data very well not only at a shallow indentation depth but also at a deep depth. Strain gradient and substrate effects are proved to coexist in film-substrate nano-indentation experiments. (c) 2006 Elsevier Ltd. All rights reserved.

Sediment budget: principals and applications

The framework of sediment budget concepts provides a formalized procedure to account for the various components of sediment flux and the changes of volume that occur within a given region. Sediment budget methodology can be useful in a number of coastal engineering and research applications, including: inferring the amount of onshore sediment transport for a nearshore system that contains an "excess of sediment", determining sediment deficits to downdrift beaches as a result of engineering works at navigational entrances, evaluating the performance of a beach nourishment project, inferring the distribution of longshore sediment transport across the surf zone, etc. This chapter reviews briefly the governing equations for sediment budget calculations, considers various measurement and other bases for determining the sediment flux components necessary to apply the sediment budget concept and finally for illustration purposes, applies the sediment budget concept to several examples. (PDF contains 52 pages.)

Study of an object recognition algorithm

This project introduces an improvement of the vision capacity of the robot Robotino operating under ROS platform. A method for recognizing object class using binary features has been developed. The proposed method performs a binary classification of the descriptors of each training image to characterize the appearance of the object class. It presents the use of the binary descriptor based on the difference of gray intensity of the pixels in the image. It shows that binary features are suitable to represent object class in spite of the low resolution and the weak information concerning details of the object in the image. It also introduces the use of a boosting method (Adaboost) of feature selection al- lowing to eliminate redundancies and noise in order to improve the performance of the classifier. Finally, a kernel classifier SVM (Support Vector Machine) is trained with the available database and applied for predictions on new images. One possible future work is to establish a visual servo-control that is to say the reac- tion of the robot to the detection of the object.

Comments on hydrographic and topographic LIDAR acquisition and merging with multibeam sounding data acquired in the Olympic Coast National Marine Sanctuary

In April 2005, a SHOALS 1000T LIDAR system was used as an efficient alternative for safely acquiring data to describe the existing conditions of nearshore bathymetry and the intertidal zone over an approximately 40.7 km2 (11.8 nm2) portion of hazardous coastline within the Olympic Coast National Marine Sanctuary (OCNMS). Data were logged from 1,593 km (860 nm) of track lines in just over 21 hours of flight time. Several islands and offshore rocks were also surveyed, and over 24,000 geo-referenced digital still photos were captured to assist with data cleaning and QA/QC. The 1 kHz bathymetry laser obtained a maximum water depth of 22.2 meters. Floating kelp beds, breaking surf lines and turbid water were all challenges to the survey. Although sea state was favorable for this time of the year, recent heavy rainfall and a persistent low-lying layer of fog reduced acquisition productivity. The existence of a completed VDatum model covering this same geographic region permitted the LIDAR data to be vertically transformed and merged with existing shallow water multibeam data and referenced to the mean lower low water (MLLW) tidal datum. Analysis of a multibeam bathymetry-LIDAR difference surface containing over 44,000 samples indicated surface deviations from –24.3 to 8.48 meters, with a mean difference of –0.967 meters, and standard deviation of 1.762 meters. Errors in data cleaning and false detections due to interference from surf, kelp, and turbidity likely account for the larger surface separations, while the remaining general surface difference trend could partially be attributed to a more dense data set, and shoal-biased cleaning, binning and gridding associated with the multibeam data for maintaining conservative least depths important for charting dangers to navigation. (PDF contains 27 pages.)

Age determination methods for northwest Atlantic species

The successful application of techniques to enhance detection of age marks in biological specimens is of vital importance in fisheries research. This manual documents age determination techniques used by staff at the Woods Hole Laboratory, National Marine Fisheries Service. General information on procedures for preparing anatomical structures is described, together with criteria used to interpret growth patterns and assign ages. Annotated photographs of age structures are provided to illustrate criteria. Detailed procedures are given for the following species: Atlantic herring (Clupea harengus), haddock (Melanogrammus aeglefinus), Atlantic cod (Gadus morhua), pollock (Pollachius virens), silver hake (Merluccius bilinearis), red hake (Urophycis chuss), black sea bass (Centropristis striata), weakfish (Cynoscion regalis), Atlantic mackerel (Scomber scombrus), butterfish (Peprilus triacanthus), redfish (Sebastes fasciatus), summer flounder (Paralichthys dentatus), winter flounder (Pseudopleuronectes americanus), witch flounder (Glyptocephalus cynoglossus), American plaice (Hippoglossoides platessoides), yellowtail flounder (Limanda ferruginea), surf clam (Spisula solidissima), and ocean quahog (Arctica islandica). (PDF file contains 142 pages.)

Food habits and dietary variability of pelagic nekton off Oregon and Washington, 1979-1984

The food habits of 20 species of pelagic nekton were investigated from collections made with small-mesh purse seines from 1979-84 off Washington and Oregon. Four species (spiny dogfish, Squalus acanthias; soupfin shark, Galeorhinus zyopterus; blue shark, Prionace glauca; and cutthroat trout, Salmo clarki) were mainly piscivorous. Six species (coho salmon, Oncorhynchus kisutch; chinook salmon, O. tshawytscha; black rockfish, Sebastes melanops; yellowtail rockfish, S. f1avidus; sablefish, Anoplopoma fimbria; and jack mackerel, Trachurus symmetricus) consumed both nektonic and planktonic organisms. The remaining species (market squid, Loligo opalescens; American shad, Alosa sapidissima; Pacific herring, Clupea harengus pallasi; northern anchovy, Engraulis mordax; pink salmon, O. gorbuscha; surf smelt, Hypomesus pretiosus; Pacific hake, Merluccius productus; Pacific saury, Cololabis saira; Pacific mackerel, Scomber japonicus; and medusafish, Icichthys lockingtom) were primarily planktonic feeders. There were substantial interannual, seasonal, and geographic variations in the diets of several species due primarily to changes in prey availability. Juvenile salmonids were not commonly consumed by this assemblage of fishes (PDF file contains 36 pages.)

Technological status and development prospects of small-scale fishing crafts in Nigerian coastal water

A study of fishing crafts was conducted in some coastal states of Nigeria to elucidate findings on the existing crafts as the baseline for further developments. Based on the technical designs, three types of fishing crafts were identified; planked, dug-out and half dug-out canoes. The planked canoes have the largest cubic number and dug-out canoes the least. At loadwater line, the ratio of freeboard to draft was 2 : 1 for planked canoes, indicating reserved buoyancy. Trim of planked canoe is by stern; the beam-length ratio for dug-out canoes showed high drag. Most of the sea-going canoes have U-shaped bottom hull profile capable of withstanding the rigours of surf landing and displayed good stability against longitudinal water wave. Gunwale and thwarts provided respectively the longitudinal and transverse strength of planked and half dug-out canoes. With its characteristics 'weight low down' construction, planked canoe represent the climax of small scale fishing crafts developments in Nigerian coastal waters. It's only draw back is durability. Further improvement in this canoe should be aimed at increasing the hull size and stiffness, water tightness of deck by coating, caulking, fastening, increasing level of motorization and installation of deck working equipments. Experimental design and use of fibre glass, aluminium and ferrocement hulls, together with improved planked canoe is highly advocated

Etapa sentikorraren lehenengo fasearen (8-12 urte) garrantzia keinu teknikoak barneratzerako surfean

8-12 urte bitarteko umeen surf entrenamendu prozesua nola planifikatu behar da, murgilduta dauden etapa sentikorra kontuan hartuz.

Femtosecond laser-induced damage in reflector

We have investigated the damage for ZrO2/SiO2 800 nm 45 degrees high-reflection mirror with femtosecond pulses. The damage morphologies and the evolution of ablation crater depths with laser fluences are dramatically different from that with pulse longer than a few tens of picoseconds. The ablation in multilayers occurs layer by layer, and not continuously as in the case of bulk single crystalline or amorphous materials. The weak point in damage is the interface between two layers. We also report its single-short damage thresholds for pulse durations ranging from 50 to 900 fs, which departs from the diffusion-dominated tau(1/2)(p) scaling. A developed avalanche model, including the production of conduction band electrons (CBE) and laser energy deposition, is applied to study the damage mechanisms. The theoretical results agree well with our measurements. (c) 2005 Elsevier B.V. All rights reserved.

Studying atomic-resolution by X-ray fluorescence holography

In this work, the results of numerical simulations of X-ray fluorescence holograms and the reconstructed atomic images for Fe single crystal are given. The influences of the recording angles ranges and the polarization effect on the reconstruction of the atomic images are discussed. The process for removing twin images by multiple energy fluorescence holography and expanding the energy range of the incident X-rays to improve the resolution of the reconstructed images is presented. (c) 2005 Elsevier B.V. All rights reserved.

Fabrication of microelectrodes deeply embedded in LiNbO3 using a femtosecond laser

We present a novel technique to fabricate deeply embedded microelectrodes in LiNbO3 using femtosecond pulsed laser ablation and selective electroless plating. The fabrication process mainly consists of four steps, which are (1) micromachining of microgrooves on the surface of LiNbO3 by femtosecond laser ablation; (2) formation of AgNO3 films on substrates; (3) scanning the femtosecond laser beam in the fabricated microgrooves for modi. cation of the inner surfaces; and (4) electroless copper plating. The void-free electroless copper plating is obtained with appropriate cross section of microgrooves and uniform initiation of the autocatalytic deposition on the inner surface of grooves. The dimension and shape of the microelectrodes could be accurately controlled by changing the conditions of femtosecond laser ablation, which in turn can control the distribution of electric field inside LiNbO3 crystal for various applications, opening up a new approach to fabricate three-dimensional integrated electro-optic devices. (C) 2008 Elsevier B. V. All rights reserved.

Recent progress in femtosecond holography

The recent advancements of femtosecond (fs) holography are introduced. The experimental requirements and the time resolution are presented. Applications of femtosecond holography to signal processing, and other femtosecond holographic techniques such as femtosecond holographic imaging and microprocessing are detailed. A potential alternative of femtosecond holography is proposed, based on the sectional interference of reference pulse with the time stretched signal pulse. (c) 2005 Elsevier B.V. All rights reserved.

Morphological characteristics of amorphous Ge2Sb2Te5 films after a single femtosecond laser pulse irradiation

The morphology of materials resulting from laser irradiation of the single-layer and the multilayer amorphous Ge2Sb2Te5 films using 120 fs pulses at 800 nm was observed using scanning electron microscopy and atomic force microscopy. For the single-layer film, the center of the irradiated spot is depression and the border is protrusion, however, for the multilayer film, the center morphology changes from a depression to a protrusion as the increase of the energy. The crystallization threshold fluence of the single-layer and the multilayer film is 22 and 23 mJ/cm(2), respectively. (c) 2005 Elsevier B.V. All rights reserved.