Edge-based connected component approach for skew correction of complex document images

Skew correction of complex document images is a difficult task. We propose an edge-based connected component approach for robust skew correction of documents with complex layout and content. The algorithm essentially consists of two steps - an 'initialization' step to determine the image orientation from the centroids of the connected components and a 'search' step to find the actual skew of the image. During initialization, we choose two different sets of points regularly spaced across the the image, one from the left to right and the other from top to bottom. The image orientation is determined from the slope between the two succesive nearest neighbors of each of the points in the chosen set. The search step finds succesive nearest neighbors that satisfy the parameters obtained in the initialization step. The final skew is determined from the slopes obtained in the 'search' step. Unlike other connected component based methods, the proposed method does not require any binarization step that generally precedes connected component analysis. The method works well for scanned documents with complex layout of any skew with a precision of 0.5 degrees.

Inverted slot-mode slow-wave structures for traveling-wave tubes

The dispersion and impedance characteristics of an inverted slot-mode (ISM) slow-wave structure computed by three different techniques, i.e., an analytical model based on a periodic quasi-TEM approach, an equivalent-circuit model, and 3-D electromagnetic simulation are obtained and compared. The comparison was carried out for three different slot-mode structures at S-, C-, and X-bands. The approach was also validated with experimental measurements on a practical X-band ISM traveling-wave tube. The design of ferruleless ISM slow-wave structures, both in circular and rectangular formats, has also been proposed and the predicted dispersion characteristics for these two geometries are compared with 3-D simulation and cold-test measurements. The impedance characteristics for all three designs are also compared.

Epigallocatechin gallate is a slow-tight binding inhibitor of enoyl-ACP reductase from Plasmodium falciparum

Epigallocatechin gallate (EGCG) is known to have numerous pharmacological properties. In the present study, we have shown that EGCG inhibits enoyl–acyl carrier protein reductase of Plasmodium falciparum (PfENR) by following a two-step, slow, tight-binding inhibition mechanism. The association/isomerization rate constant (k5) of the reversible and loose PfENR–EGCG binary complex to a tight [PfENR–EGCG]* or EI* complex was calculated to be 4.0 × 10−2 s−1. The low dissociation rate constant (k6) of the [PfENR–EGCG]* complex confirms the tight-binding nature of EGCG. EGCG inhibited PfENR with the overall inhibition constant (Ki*) of 7.0 ± 0.8 nM. Further, we also studied the effect of triclosan on the inhibitory activity of EGCG. Triclosan lowered the k6 of the EI* complex by 100 times, lowering the overall Ki* of EGCG to 97.5 ± 12.5 pM. The results support EGCG as a promising candidate for the development of tea catechin based antimalarial drugs.

Macroseismology as a Component of Seismicity Assessments in an Intraplate Region: Studies of Northern Europe with Emphasis on Finland

This work focuses on the role of macroseismology in the assessment of seismicity and probabilistic seismic hazard in Northern Europe. The main type of data under consideration is a set of macroseismic observations available for a given earthquake. The macroseismic questionnaires used to collect earthquake observations from local residents since the late 1800s constitute a special part of the seismological heritage in the region. Information of the earthquakes felt on the coasts of the Gulf of Bothnia between 31 March and 2 April 1883 and on 28 July 1888 was retrieved from the contemporary Finnish and Swedish newspapers, while the earthquake of 4 November 1898 GMT is an example of an early systematic macroseismic survey in the region. A data set of more than 1200 macroseismic questionnaires is available for the earthquake in Central Finland on 16 November 1931. Basic macroseismic investigations including preparation of new intensity data point (IDP) maps were conducted for these earthquakes. Previously disregarded usable observations were found in the press. The improved collection of IDPs of the 1888 earthquake shows that this event was a rare occurrence in the area. In contrast to earlier notions it was felt on both sides of the Gulf of Bothnia. The data on the earthquake of 4 November 1898 GMT were augmented with historical background information discovered in various archives and libraries. This earthquake was of some concern to the authorities, because extra fire inspections were conducted in three towns at least, i.e. Tornio, Haparanda and Piteå, located in the centre of the area of perceptibility. This event posed the indirect hazard of fire, although its magnitude around 4.6 was minor on the global scale. The distribution of slightly damaging intensities was larger than previously outlined. This may have resulted from the amplification of the ground shaking in the soft soil of the coast and river valleys where most of the population was found. The large data set of the 1931 earthquake provided an opportunity to apply statistical methods and assess methodologies that can be used when dealing with macroseismic intensity. It was evaluated using correspondence analysis. Different approaches such as gridding were tested to estimate the macroseismic field from the intensity values distributed irregularly in space. In general, the characteristics of intensity warrant careful consideration. A more pervasive perception of intensity as an ordinal quantity affected by uncertainties is advocated. A parametric earthquake catalogue comprising entries from both the macroseismic and instrumental era was used for probabilistic seismic hazard assessment. The parametric-historic methodology was applied to estimate seismic hazard at a given site in Finland and to prepare a seismic hazard map for Northern Europe. The interpretation of these results is an important issue, because the recurrence times of damaging earthquakes may well exceed thousands of years in an intraplate setting such as Northern Europe. This application may therefore be seen as an example of short-term hazard assessment.

The Exeter Contemporary flanged cemented acetabular component in primary total hip arthroplasty

Aims: We report on the outcome of the Exeter Contemporary flanged cemented all-polyethylene acetabular component with a mean follow-up of 12 years (10 to 13.9). This study reviewed 203 hips in 194 patients. 129 hips in 122 patients are still in situ; 66 hips in 64 patients were in patients who died before ten years, and eight hips (eight patients) were revised. Clinical outcome scores were available for 108 hips (104 patients) and radiographs for 103 hips (100 patients). Patients and Methods: A retrospective review was undertaken of a consecutive series of 203 routine primary cemented total hip arthroplasties (THA) in 194 patients. Results: There were no acetabular component revisions for aseptic loosening. Acetabular revision was undertaken in eight hips. In four hips revision was necessitated by periprosthetic femoral fractures, in two hips by recurrent dislocation, in one hip for infection and in one hip for unexplained ongoing pain. Oxford and Harris hip scores demonstrated significant clinical improvement (all p < 0.001). Radiolucent lines were present in 37 (36%) of the 103 acetabular components available for radiological evaluation. In 27 of these, the line was confined to zone 1. No component had migrated. Conclusion: Kaplan–Meier survivorship, with revision for aseptic loosening as the endpoint, was 100% at 12.5 years and for all causes was 97.8% (95% confidence interval 95.6 to 100) when 40 components remained at risk. The Exeter Contemporary flanged cemented acetabular component demonstrates excellent survivorship at 12.5 years. Take home message: The Exeter Contemporary flanged cemented acetabular component has excellent clinical outcomes and survivorship when used with the Exeter stem in total hip arthroplasty.

Multilayer single-component thin films and microcapsules via covalent bonded layer-by-layer self-assembly

Fabrication of single-component multilayer thin films still remains a challenging task via the layer-by-layer (LbL) approach. In this communication, we report the self-assembly of single-component multilayer thin films on flat and colloidal substrates through glutaraldehyde mediated covalent bonding.

Secondary flows induced by the rotation of a sphere or coaxial cones in micropolar fluids

The micropolar fluids like Newtonian and Non-Newtonian fluids cannot sustain a simple shearing motion, wherein only one component of velocity is present. They exhibit both primary and secondary motions when the boundaries are subject to slow rotations. The primary motion, as in Non-Newtonian fluids, characterized by the equation due to Rivlin-Ericksen, Oldroyd, Walters etc., resembles that of Newtonian fluid for slow steady rotation. We further notice that the micro-rotation becomes identically equal to the vorticity present in the fluid and the condition b) of "Wall vorticity" can alone be satisfied at the boundaries. As regards, the secondary motion, we notice that it can be determined by the above procedure for a special class of fluids, namely that for which j0(n2-n3)=4 n3/l2. Moreover for this class of fluids, the micro-rotation is identical with the vorticity of the fluid everywhere. Also the stream function for the secondary flow is identical with that for the Newtonian fluid with a suitable definition of the Reynolds number. In contrast with the Non-Newtonian fluids, characterized by the equation due to Rivlin-Ericksen, Oldroyd, Walters etc., this class of micropolar fluids does not show separation. This is in conformity with the statement of Condiff and Dahler (3) that in any steady flow, internal spin matches the vorticity everywhere provided that (i) spin boundary conditions are satisfied, (ii) body torques and non-conservative body forces are absent, and (iii) inertial and spin-inertial terms are either negligible or vanish identically.

Slow rotation of a sphere in a non-Newtonian fluid with or without suction or injection

The flow generated by the rotation of a sphere in an infinitely extending fluid has recently been studied by Goldshtik. The corresponding problem for non-Newtonian Reiner-Rivlin fluids has been studied by Datta. Bhatnagar and Rajeswari have studied the secondary flow between two concentric spheres rotating about an axis in the non-Newtonian fluids. This last investigation was further generalised by Rajeswari to include the effects of small radial suction or injection. In Part A of the present investigation, we have studied the secondary flow generated by the slow rotation of a single sphere in non-Newtonian fluid obeying the Rivlin-Ericksen constitutive equation. In Part B, the effects of small suction or injection have been studied which is applied in an arbitrary direction at the surface of the sphere. In the absence of suction or injection, the secondary flow for small values of the visco-elastic parameter is similar to that of Newtonian fluids with inclusion of inertia terms in the Oseen approximation. If this parameter exceeds Kc = 18R/219, whereR is the Reynolds number, the breaking of the flow field takes place into two domains, in one of which the stream lines form closed loops. For still higher values of this parameter, the complete reversal of the sense of the flow takes place. When suction or injection is included, the breaking of the flow persists under certain condition investigated in this paper. When this condition is broken, the breaking of the flow is obliterated.

Analysis of Ridge-Loaded Folded-Waveguide Slow-Wave Structures for Broadband Traveling-Wave Tubes

An E-plane serpentine folded-waveguide slow-wave structure with ridge loading on one of its broad walls is proposed for broadband traveling-wave tubes (TWTs) and studied using a simple quasi-transverse-electromagnetic analysis for the dispersion and interaction impedance characteristics, including the effects of the beam-hole discontinuity. The results are validated against cold test measurements, an approximate transmission-line parametric analysis, an equivalent circuit analysis, and 3-D electromagnetic modeling using CST Microwave Studio. The effect of the structure parameters on widening the bandwidth of a TWT is also studied.

The ratio of diffusion coefficient to mobility for slow electrons in dry air

Using Huxley's solution of the diffusion equation for electron-attaching gases, the ratio of diffusion coefficient D to mobility μ for electrons in dry air was measured over the range 3·06 × 10-17

Oscillations of a three-component assembly with or without magnetic field

The plasma is taken to be composed of singly ionized molecules, free electrons and neutral molecules, each of the component being described by the hydromagnetic equations, modified to take into account the displacement current, existence of free charge in the medium, and the modified current equation without involving the scalar conductivity. The basic equations are linearized and only small amplitude waves are considered. In the absence of any external magnetic field, the transverse and longitudinal modes of oscillation separate out. In the transverse part a coupled plasma oscillation occurs which could be propagated only above a certain critical frequency and in the longitudinal part one extraordinary mode of propagation occurs having a forbidden range of frequencies. When there is an external applied magnetic field, ordinary and extraordinary waves are propagated along the direction of the magnetic field, whereas only ordinary waves are propagated transverse to the magnetic field. The critical frequencies above which these waves are propagated are evaluated and, the possible explanation of this medium like behaviour could be the implicit assumption of conductivity being not a scalar.

Fatty acid component of vitamin A ester in sheep liver

Vitamin A, when extracted along with other lipids from sheep liver, had an E1cm.1% value of 14.4, which was raised to 45.57 on removal of the phospholipids by cold acetone. Selective hydrolysis of triglycerides by an extract of acetone-dried sheep pancreas in the presence of HgCl2 as inhibitor of vitamin A esterase, followed by chromatography through alumina gave a product with E1cm.1% value of 276. This on chromatography through magnesium oxide raised the E1cm.1, value to 601.5, representing 64% pure vitamin A ester calculated as palmitate, and the total recovery was 23% of the starting oil. The purified ester preparation, when subjected to reverse-phase chromatography on silicone-impregnated paper, gave a single ultraviolet fluorescent band. The fluorescent band on hydrolysis gave only one fatty acid. This was conclusively identified to be palmitic acid.

Voittoa tavoittelemattoman organisaation brandin rakentaminen. Case Slow Food

Tämän pro gradu-tutkielman tavoitteena oli kartoittaa voittoa tavoittelemattoman Slow Food-organisaation brandiin liitettyjä mielikuvia ja niitä tekijöitä, joilla brandin tavoitekuvaa tulisi jatkossa rakentaa. Koska nykyisin brandi ei ole enää pelkkien liikeyritysten yksityisomaisuutta, tutkimuksen teoreettinen asemointi perustui yhtäältä organisaation tunnettuuden kasvattamiseen brandin rakentamisen avulla ja toisaalta voittoa tavoittelemattoman toimintaympäristön erityispiirteiden näkökulmaan. Case-osion avulla haluttiin tarkastella globalisaation ja elintarviketalouden keskittymiselle vaihtoehtoisen, paikallisuuteen perustuvan ruokajärjestelmän vaikutuksia, mahdollisuuksia ja haasteita. Tutkimuksen empiirinen osuus muodostui laadullisesta tapaustutkimuksesta, jonka kohteena oli Slow Food-organisaatio. Tutkimus suoritettiin haastattelemalla kahtatoista Slow Food-organisaation sidosryhmien edustajaa Italian Piemontessa henkilökohtaisin haastatteluin, joiden pohjana oli brandi identiteetin elementeistä luodut kaksi teemaa: mielleyhtymiin ja arvoväittämään liittyvät tekijät. Aineiston analysoinnissa käytettiin teemoittelua ja sisällönanalyysia. Tutkimuksen lähestymistapa oli abduktiivinen. Tulosten mukaan Slow Food-brandi identifioituu sidosryhmilleen ensisijaisesti luotettavan ruoan kautta, johon katsottiin kuuluvan aidot, puhtaat raaka-aineet ja paikallisesti tuotetun ja jalostamattoman ruoan hyvä jäljitettävyys. Myös tiettyyn paikkaan ja arvoihin sidottujen kokemusten ja odostusten täyttymisen kautta saatu sosiaalinen ja kulttuurinen jatkuvuus nimettiin brandin vahvuudeksi. Lisäksi vastuullisen tuottamisen ja kuluttamisen sekä aitojen makujen ja laadukkaan ruokavalion edistäminen korostuivat jonkin verran vastauksissa. Näillä perusvahvuuksilla toivottiin brandin identiteettiä rakennettavan myös tulevaisuudessa. Haastateltavien mielestä Slow Food-organisaatio erilaistaa itsensä muista ensisijaisesti lupaamalla yksilölle korkealuokkaisia, aitoja tuotteita ja palveluja, joilla on henkilökohtaisten hyötyjen lisäksi positiivisia seuraamuksia myös oman alueen työllisyyden ja talouden kehitykseen. Organisaation tulisi myös jatkossa luoda uskottavuutta toimintaansa eritoten sen kautta, että brandi lunastaa lupauksensa laadusta ja aitoudesta. Toisaalta erottautuakseen muista lähi- ja luomuruokabrandeista Slow Food-brandin arvoväittämässä tulisi tulevaisuudessa selkeämmin korostua myös toiminnan voittoa tavoittelemattomuus ja brandiin liittyvä elämyksellisyys. Sidosryhmien kiinnostusta ja brandin lupauksen tehoa alentaviksi tekijöiksi nimettiin yleinen ruoan arvostuksen väheneminen sekä Slow Food-tuotteiden ja -palvelujen korkea hinta, huono saatavuus ja näkyvyys. Keskeisimpinä ratkaisuina pidettiin kuluttajien informatiivisen tiedon lisäämisen ohella pientuottajien verkostoitumista ja uusia yhteistyön muotoja kuten tuottajien yhteisiä jakeluketjuja ja paikallismyymälöitä. Näiden lisäksi brandin tunnistettavuuden parantaminen ja aktiivisempi tarjonta kyltityksin, tuotteiden pysyvän läsnäolon ja vähittäiskaupan mukaantulon kautta sekä eräät muut markkinoinnin osa-alueet kuten sosiaalinen media, Internet ja kansainväliset ruoka-alan tapahtumat nimettiin brandin lupausta kirkastaviksi elementeiksi. Pientuotannon lisääminen verotuksen kohdentumisen muutoksilla nähtiin keinoksi pudottaa paikallisen ruoan hintaa.Toisaalta korkeaa hintaa perusteltiin laadukkaaseen imagoon liittyvien argumenttien lisäksi luonnollisen kysynnän kasvulla, jota arveltiin saatavan tulevaisuudessa suurista ikäluokista, yhä kasvavasta koulutus- ja tulotasosta sekä valveutuneemmista kuluttajista.

A study of the slow reaction in Al-5 wt.% Ag alloy by resistivity measurements

The slow reaction in an Al-5 wt.% Ag alloy has been investigated by resistivity measurements. The "slope change" method gave an activation energy of 1.25 eV for silver diffusion during the slow reaction. The existence of an excess concentration of vacancies in equilibrium with the dislocation loops seems to be responsible for the slow reaction. The presence of silver inhibits the nucleation of dislocation loops by holding up the quenched-in vacancies in solution. There is no indication of the presence of a third stage in the low-temperature ageing process of this alloy.