La disciplina della gestione aeroportuale e dei servizi aeroportuali nel diritto dei trasporti europeo e nazionale

Dopo gli indubbi sviluppi politici e legali tendenti all’uniformazione è inevitabile non sostenere che anche il mercato della gestione delle infrastrutture e del trasporto aereo a terra costituisce un fattore determinante del trasporto aereo con una più stretta necessità di uniformazione del quadro regolamentare. La gestione aeroportuale e i servizi connessi è collocata all’interno del diritto aereo. Perché si configuri il “trasporto aereo” (nozione dinamica base che caratterizza il diritto del trasporto aereo) si ha la necessità di un accordo tra due paesi – un permesso di volo designato – una finestra di orario di decollo e atterraggio e la regolamentazione delle relative attività connesse, affinché si svolgano in situazione di safety, quale conditio sine qua non di tutte le attività di aviazione. Tuttavia, la migliore dottrina sente il bisogno di una trattazione separata della materia diritto aereo in senso stretto e quella della disciplina aeroportuale, benché i due ambiti sono tra di loro contigui. Questo è legittimato da esigenze contrapposte fra gli operatori dei due settori. In ultima considerazione possiamo sostenere che gli sviluppi legislativi, sia nel diritto aeronautico e in quello marittimo, portano all’abbraccio della impostazione di un diritto dei trasporti inclusivo di ogni forma dell’attuazione del fenomeno trasporto, scollegandosi al solo fenomeno dell’esercizio nautico quale elemento caratterizzante della disciplina. Quale futuro legislativo si prospetta per la gestione del bene aeroporto? Quale sarà la sua dimensione legale su questioni importanti sulle quali esiste una normazione europea come l’allocazione delle bande orarie, tasse aeroportuali e assistenza a terra oppure su quelle che hanno un carattere prevalentemente nazionale? E infine, quale sarebbe la strada da seguire per regolare il nuovo mercato aeroportuale che è passato dalla idea della competizione per il mercato esplorando anche la competizione nel mercato, con aeroporti che si comportano come operatori in concorrenza tra loro?

Studio e ottimizzazione della ipersostentazione del velivolo V-173

Studio della ipersostentazione di un velivolo non convenzionale degli anni ‘40, il Vought V-173 Flying Pancake. Per realizzare l’intero lavoro si sono adoperati dei software di fluidodinamica computazionale come Flow Simulation di SolidWorks e il programma JavaFoil, inoltre, si è scelto l’ambiente Matlab di supporto ai calcoli e per rappresentare i risultati ottenuti a seguito delle simulazioni, realizzando script e funzioni per l’approssimazione di questi e la loro successiva raffigurazione grafica. In particolar modo, a partire dal modello tridimensionale in SolidWorks del V-173 si sono ricreate le curve CL-α e CD-α a partire dai punti ottenuti dalle simulazioni per diverse configurazioni del velivolo. In una prima fase si è valutata l’aerodinamica del velivolo ‘pulito’ senza la presenza delle eliche e di ipersostentatori, successivamente si sono seguite due strade diverse per valutare il comportamento del velivolo: nel primo caso si sono eseguiti studi dell’aerodinamica del Pancake in presenza degli ipersostentatori già presenti sul velivolo (i plain flap), proponendo soluzioni alternative per migliorare l’ipersostentazione del V-173 tramite spillamenti (slots) e diverse configurazioni di vortex generator che energizzassero lo strato limite e ottimizzassero le prestazioni del velivolo con particolare attenzione alla fase di atterraggio. In secondo luogo, tenendo in considerazione che il Pancake è un aeroplano bielica, si è voluta studiare l’influenza delle due eliche sulla sua aerodinamica: dopo aver riprodotto nel modo più verosimile entrambe le eliche utilizzando SolidWorks si è fatto uno studio di massima ricavando risultati che potessero indicare la compatibilità tra elica e velivolo a seguito dei risultati sperimentali ottenuti con Flow Simulation.

Untersuchungen zur Chemosensitivität von testikulären Tumorzellen gegenüber Cisplatin

Metastasierender Krebs ist bei Erwachsenen in der Regel nicht heilbar. Eine Ausnahme stellen testikuläre Keimzelltumoren (TKZT) dar, da über 75 % der Patienten mit fortgeschrittenen metastasierenden TKZT mit einer auf Cisplatin basierenden Kombinations-Chemotherapie geheilt werden können. Zelllinien, die aus TKZT isoliert wurden, behalten diese Cisplatin-Sensitivität in vitro bei. Somit spiegeln Testistumorzelllinien die klinische Situation wider und sind deswegen ein gutes Modellsystem um zu untersuchen, welche Faktoren der Cisplatin-Sensitivität zugrunde liegen. Die Ursachen der Cisplatin-Sensitivität in Testistumoren sind nicht bekannt. Es wurde bereits gezeigt, dass Testistumorzellen eine geringe Kapazität für die Entfernung von Cisplatin-induzierten DNA-Platinierungen aufweisen. Dieser Defekt in der DNA-Reparatur könnte ein Faktor für die beobachtete Cisplatin-Sensitivität sein. Cisplatin induziert sowohl Intrastrang-Vernetzungen als auch Interstrang-Vernetzungen (ICLs). Die Bildung und Reparatur der Cisplatin-induzierten Intrastrang-Vernetzungen wurde mittels DNA-Slot-Blot, die Bildung und Entfernung von Interstrang-Vernetzungen wurde mithilfe des Comet-Assays untersucht. In der vorliegenden Arbeit wurde gezeigt, dass die Reparatur von Intrastrang-Vernetzungen in Testis- und Blasentumorzelllinien vergleichbar ist. Somit sind Testistumorzellen in diesem Reparaturweg nicht beeinträchtigt. Im Unterschied dazu zeigte sich, dass Testistumorzellen die ICLs nicht oder nur mit einer reduzierten Kapazität entfernen können.Da die ICL-Reparatur über die Bildung von DNA-Doppelstrangbrüchen (DSB) mit anschließender DSB-Reparatur verläuft, wurde die Kinetik der DSB-Reparatur anhand der Immundetektion der Histon-Variante γH2AX, die zur Visualisierung von DSB verwendet wird, verfolgt. γH2AX Foci wurden nach Behandlung mit Cisplatin in Testistumorzellen und Blasentumorzellen gebildet. Anders als in Blasentumorzellen blieb der Prozentsatz an γH2AX-positiven Zellen in Testistumorzellen bestehen. Offensichtlich konnten die Testistumorzellen die Cisplatin-induzierten ICLs nicht korrekt prozessieren, was dazu führte, dass γH2AX Foci persistierten. Da unreparierte DNA-Läsionen eine DNA-schadensabhängige Antwort einleiten können, wurde die Aktivierung der Hauptfaktoren dieser Signalwege untersucht. In den Testistumorzellen zeigte sich eine Erhöhung der p53 Proteinmenge nach Cisplatin-Behandlung. Des Weiteren wurde die durch Cisplatin induzierte Aktivierung von ATM/ATR, Chk1/Chk2, Bax und Noxa in Testis- und Blasentumorzellen vergleichend untersucht. Es wurde bereits gezeigt, dass der Reparaturfaktor ERCC1-XPF in Testistumorzelllinien reduziert vorliegt. Um eine mögliche Rolle von ERCC1-XPF für die Reparatur-Defizienz der ICLs und Cisplatin-Sensitivität in Testistumorzellen zu analysieren, wurde ERCC1-XPF in der Testistumorenzelllinie 833K mithilfe eines Expressionsvektors überexprimiert, und der Einfluss von ERCC1-XPF auf ICL-Reparatur sowie Cisplatin-Sensitivität wurde ermittelt. Überexpression von ERCC1-XPF führte zur Reparatur der ICLs in 833K-Zellen und verminderte die Cisplatinsensitivität. Somit scheint die Cisplatinsensitivität der Testistumorzellen, zumindest zum Teil, auf einer verminderten ICL-Reparatur zu beruhen. Des Weiteren wurde in „proof of principle“ Experimenten ERCC1-XPF in der Cisplatin-resistenten Blasentumorzelllinie MGH-U1 mittels siRNA herunterreguliert, und die Auswirkung der Herunterregulation auf die ICL-Reparatur und die Cisplatinsensitivität wurde geprüft. RNA-Interferenz-vermittelte Herunterregulierung von ERCC1-XPF reduzierte die Prozessierung der Cisplatin-induzierten ICLs und verstärkte die Cisplatinsensitivität in MGH-U1 Zellen. Somit wurde in dieser Arbeit zum ersten Mal gezeigt, dass die Testistumorzellen in Vergleich zu Blasentumorzellen in der Reparatur von ICLs defizient sind, wobei die verminderte ICL-Reparatur auf die geringe Expression von ERCC1-XPF zurückgeführt werden konnte. Diese ICL-Reparatur-Defizienz könnte, zumindest zu einem Teil, für die Sensitivität der Testistumoren gegenüber Cisplatin verantwortlich sein.

Coded slotted aloha with multipacket reception over block fading channels (for satellite networks)

Random access (RA) protocols are normally used in a satellite networks for initial terminal access and are particularly effective since no coordination is required. On the other hand, contention resolution diversity slotted Aloha (CRDSA), irregular repetition slotted Aloha (IRSA) and coded slotted Aloha (CSA) has shown to be more efficient than classic RA schemes as slotted Aloha, and can be exploited also when short packets transmissions are done over a shared medium. In particular, they relies on burst repetition and on successive interference cancellation (SIC) applied at the receiver. The SIC process can be well described using a bipartite graph representation and exploiting tools used for analyze iterative decoding. The scope of my Master Thesis has been to described the performance of such RA protocols when the Rayleigh fading is taken into account. In this context, each user has the ability to correctly decode a packet also in presence of collision and when SIC is considered this may result in multi-packet reception. Analysis of the SIC procedure under Rayleigh fading has been analytically derived for the asymptotic case (infinite frame length), helping the analysis of both throughput and packet loss rates. An upper bound of the achievable performance has been analytically obtained. It can be show that in particular channel conditions the throughput of the system can be greater than one packets per slot which is the theoretical limit of the Collision Channel case.

Review of Lodox Statscan in the detection of peripheral skeletal fractures in multiple injury patients

As part of the primary survey, polytrauma patients in our emergency department are examined using the new 'Lodox Statscan' (LS) digital low-radiation imaging device. The LS provides full-body anterior and lateral views based on enhanced linear slot-scanning technology, in accordance with the recommended Advanced Trauma Life Support (ATLS) Guidelines. This study's objectives were to establish whether LS appropriately rules out peripheral bone injuries and to examine whether LS imaging provides adequate information for the preoperative planning of such lesions.

Comparative assessment of clinical performance of esthetic bracket materials

To compare the alterations in esthetic appearance and slot morphology/integrity of two main types of esthetic brackets caused after clinical use.

Tenovaginoscopic approach to the common digital flexor tendon sheath of adult cattle: technique, normal findings and preliminary results in four clinical cases

The aim of this study was to describe the tenovaginoscopic approach to the bovine common digital flexor tendon sheath (CDFTS). A comparative anatomical, ultrasonographic and endoscopic study was undertaken using 26 healthy cadaver feet from adult dairy cows. Tenovaginoscopy was performed using a rigid, 30 degrees arthroscope (length 18 cm; outer diameter 4mm) enabling a direct view of the synovial cavity and the following structures: digital flexor tendons, digital annular ligaments, lateral and medial pouches, three mesotendons, the vinculum of the superficial digital flexor tendon, and a slot-shaped opening in the manicaflexoria of the hind feet. Additionally, four clinical cases of septic tenosynovitis treated with lavage under tenovaginoscopic control were examined. Tenovaginoscopy represents a feasible, minimally invasive method for the diagnosis and treatment of septic tenosynovitis of the CDFTS, which allows the degree of alterations of the normal structures to be evaluated.

A new microbiopsy system enables rapid preparation of tissue for high-pressure freezing

A microbiopsy system was developed to overcome long sampling times for tissues before they are cryo-fixed by high-pressure freezing. A commercially available biopsy gun was adapted to the needs of small-organ excisions, and biopsy needles were modified to allow small samples (0.6 mm x 1.2 mm x 0.3 mm) to be taken. Specimen platelets with a central slot of the same dimensions as the biopsy are used. A self-made transfer device (in the meantime optimized by Leica-Microsystems [Vienna, Austria]) coordinates the transfer of the excised sample from the biopsy needle into the platelet slot and the subsequent loading in a specimen holder, which is then introduced into a high-pressure freezer (Leica EM PACT; Leica Microsystems, Vienna, Austria). Thirty seconds preparation time is needed from excision until high-pressure freezing. Brain, liver, kidney and muscle excisions of anesthetised rats are shown to be well frozen.

Could full-body digital X-ray (LODOX-Statscan) screening in trauma challenge conventional radiography?

ATLS Guidelines recommend single plain radiography of the chest and pelvis as part of the primary survey. Such isolated radiographs, usually obtained by bedside machines, can result in limited, low-quality studies that can adversely affect management. A new digital, low-radiation imaging device, the "Lodox Statscan" (LS), provides full-body anterior and lateral views based on enhanced linear slot-scanning technology in just over 5 minutes. We have the first LS in Europe at our facility. The aim of this study was to compare LS with computed tomographic (CT) scanning, as the gold standard, to determine the sensitivity of LS investigation in detecting injuries to the chest, thoracolumbar spine, and pelvis from our own experience, and to compare our findings with those of conventional radiography in the literature.

Torque expression of 0.018 and 0.022 inch conventional brackets

The aim of this study was to assess the effect of the moments generated with low- and high-torque brackets. Four different bracket prescription-slot combinations of the same bracket type (Mini Diamond® Twin) were evaluated: high-torque 0.018 and 0.022 inch and low-torque 0.018 and 0.022 inch. These brackets were bonded on identical maxillary acrylic resin models with levelled and aligned teeth and each model was mounted on the orthodontic measurement and simulation system (OMSS). Ten specimens of 0.017 × 0.025 inch and ten 0.019 × 0.025 inch stainless steel archwires (ORMCO) were evaluated in the low- and high-torque 0.018 inch and 0.022 inch brackets, respectively. The wires were ligated with elastomerics into the brackets and each measurement was repeated once after religation. Two-way analysis of variance and t-test were conducted to compare the generated moments between wires at low- and high-torque brackets separately. The maximum moment generated by the 0.017 × 0.025 inch stainless steel archwire in the 0.018 inch brackets at +15 degrees ranged from 14.33 and 12.95 Nmm for the high- and low-torque brackets, respectively. The measured torque in the 0.022 inch brackets with the 0.019 × 0.025 inch stainless steel archwire was 9.32 and 6.48 Nmm, respectively. The recorded differences of maximum moments between the high- and low-torque series were statistically significant. High-torque brackets produced higher moments compared with low-torque brackets. Additionally, in both high- and low-torque configurations, the thicker 0.019 × 0.025 inch steel archwire in the 0.022 inch slot system generated lower moments in comparison with the 0.017 × 0.025 inch steel archwire in the 0.018 inch slot system.

A comparative assessment of torque generated by lingual and conventional brackets

The aim of this study was to assess the effect of bracket type on the labiopalatal moments generated by lingual and conventional brackets. Incognito™ lingual brackets (3M Unitek), STb™ lingual brackets (Light Lingual System; ORMCO), In-Ovation L lingual brackets (DENTSPLY GAC), and conventional 0.018 inch slot brackets (Gemini; 3M Unitek) were bonded on identical maxillary acrylic resin models with levelled and aligned teeth. Each model was mounted on the orthodontic measurement and simulation system and 10 0.0175 × 0.0175 TMA wires were used for each bracket type. The wire was ligated with elastomerics into the Incognito, STb, and conventional brackets and each measurement was repeated once after religation. A 15 degrees buccal root torque (+15 degrees) and then a 15 degrees palatal root torque (-15 degrees) were gradually applied to the right central incisor bracket. After each activation, the bracket returned to its initial position and the moments in the sagittal plane were recorded during these rotations of the bracket. One-way analysis of variance with post hoc multiple comparisons (Tukey test at 0.05 error rate) was conducted to assess the effect on bracket type on the generated moments. The magnitude of maximum moment at +15 degrees ranged 8.8, 8.2, 7.1, and 5.8 Nmm for the Incognito, STb, conventional Gemini, and the In-Ovation L brackets, respectively; similar values were recorded at -15 degrees: 8.6, 8.1, 7.0, and 5.7 Nmm, respectively. The recorded differences of maximum moments were statistically significant, except between the Incognito and STb brackets. Additionally, the torque angles were evaluated at which the crown torque fell well below the minimum levels of 5.0 Nmm, as well as the moment/torque ratio at the last part of the activation/deactivation curve, between 10 and 15 degrees. The lowest torque expression was observed at the self-ligating lingual brackets, followed by the conventional brackets. The Incognito and STb lingual brackets generated the highest moments.

A comparative assessment of forces and moments generated by lingual and conventional brackets

The aim of this study was to assess the effect of bracket type on the labiopalatal forces and moments generated in the sagittal plane. Incognito™ lingual brackets (3M Unitek), STb™ lingual brackets (Light Lingual System; ORMCO), and conventional 0.018 inch slot brackets (Gemini; 3M Unitek) were bonded on three identical maxillary acrylic resin models, with a palatally displaced right lateral incisor. The transfer trays for the indirect bonding of the lingual brackets were constructed in certified laboratories. Each model was mounted on the orthodontic measurement and simulation system and ten 0.013 inch CuNiTi wires were used for each bracket type. The wire was ligated with elastomerics and each measurement was repeated once after re-ligation. The labiopalatal forces and the moments in the sagittal plane were recorded on the right lateral incisor. One-way analysis of variance and post hoc Scheffe pairwise comparisons were used to assess the effect on bracket type on the generated forces and moments. The magnitude of forces ranged from 1.62, 1.27, and 1.81 N for the STb, conventional, and Incognito brackets, respectively; the corresponding moments were 2.01, 1.45, and 2.19 N mm, respectively. Bracket type was a significant predictor of the generated forces (P < 0.001) and moments (P < 0.001). The produced forces were different among all three bracket types, whereas the generated moments differed between conventional and lingual brackets but not between lingual brackets.

Ca++/calmodulin-dependent protein kinase II: Messenger RNA in developing rat brain

Ca$\sp{++}$/calmodulin-dependent protein kinase II (CaM-KII) is highly concentrated in mammalian brain, comprising as much as 2% of the total protein in some regions. In forebrain, CaM-KII has been shown to be enriched in postsynaptic structures where it has been implicated in maintaining cytoskeletal structure, and more recently in signal transduction mechanisms and processes underlying learning and memory. CaM-KII appears to exist as a holoenzyme composed of two related yet distinct subunits, alpha and beta. The ratio of the subunits in the holoenzyme varies with different brain regions and to some degree with subcellular fractions. The two subunits also display distinct developmental profiles. Levels of alpha subunit are not evident at birth but increase dramatically during postnatal development, while levels of beta subunit are readily detected at birth and only gradual increase postnatally. The distinct regional, subcellular and developmental distribution of the two subunits of CaM-KII have prompted us to examine factors involved in regulating the synthesis of the subunit proteins.^ This dissertation addresses the regional and developmental expression of the mRNAs for the individual subunits using in situ hybridization histochemistry and northern slot-blot analysis. By comparing the developmental profile of each mRNA with that of its respective protein, we have determined that initiation of gene transcription is likely the primary site for regulating CaM-KII protein levels. Furthermore, the distinct cytoarchitecture of the hippocampus has allowed us to demonstrate that the alpha, but not beta subunit mRNA is localized in dendrites of certain forebrain neurons. The localization of alpha subunit mRNA at postsynaptic structures, in concert with the accumulation of subunit protein, suggests that dendritic synthesis of CaM-KII alpha subunit may be important for maintaining postsynaptic structure and/or function. ^

Torque efficiency of different archwires in 0.018- and 0.022-inch conventional brackets.

OBJECTIVE To compare the archwires inserted during the final stages of the orthodontic treatment with the generated moments at 0.018- and 0.022-inch brackets. MATERIALS AND METHODS The same bracket type, in terms of prescription, was evaluated in both slot dimensions. The brackets were bonded on two identical maxillary acrylic resin models, and each model was mounted on the orthodontic measurement and simulation system. Ten 0.017 × 0.025-inch TMA and ten 0.017 × 0.025-inch stainless steel archwires were evaluated in the 0.018-inch brackets. In the 0.022-inch brackets, ten 0.019 × 0.025-inch TMA and ten 0.019 × 0.025-inch stainless steel archwires were measured. A 15° buccal root torque (+15°) and then a 15° palatal root torque (-15°) were gradually applied to the right central incisor bracket, and the moments were recorded at these positions. A t-test was conducted to compare the generated moments between wires within the 0.018- and 0.022-inch bracket groups separately. RESULTS The 0.017 × 0.025-inch archwire in the 0.018-inch brackets generated mean moments of 9.25 Nmm and 14.2 Nmm for the TMA and stainless steel archwires, respectively. The measured moments in the 0.022-inch brackets with the 0.019 × 0.025-inch TMA and stainless steel archwires were 6.6 Nmm and 9.3 Nmm, respectively. CONCLUSION The 0.017 × 0.025-inch stainless steel and β-Ti archwires in the 0.018-inch slot generated higher moments than the 0.019 × 0.025-inch archwires because of lower torque play. This difference is exaggerated in steel archwires, in comparison with the β-Ti, because of differences in stiffness. The differences of maximum moments between the archwires of the same cross-section but different alloys were statistically significant at both slot dimensions.