Multilayer optimization in radio resource allocation for the packet transmission in wireless networks

In the last decade mobile wireless communications have witnessed an explosive growth in the user’s penetration rate and their widespread deployment around the globe. It is expected that this tendency will continue to increase with the convergence of fixed Internet wired networks with mobile ones and with the evolution to the full IP architecture paradigm. Therefore mobile wireless communications will be of paramount importance on the development of the information society of the near future. In particular a research topic of particular relevance in telecommunications nowadays is related to the design and implementation of mobile communication systems of 4th generation. 4G networks will be characterized by the support of multiple radio access technologies in a core network fully compliant with the Internet Protocol (all IP paradigm). Such networks will sustain the stringent quality of service (QoS) requirements and the expected high data rates from the type of multimedia applications to be available in the near future. The approach followed in the design and implementation of the mobile wireless networks of current generation (2G and 3G) has been the stratification of the architecture into a communication protocol model composed by a set of layers, in which each one encompasses some set of functionalities. In such protocol layered model, communications is only allowed between adjacent layers and through specific interface service points. This modular concept eases the implementation of new functionalities as the behaviour of each layer in the protocol stack is not affected by the others. However, the fact that lower layers in the protocol stack model do not utilize information available from upper layers, and vice versa, downgrades the performance achieved. This is particularly relevant if multiple antenna systems, in a MIMO (Multiple Input Multiple Output) configuration, are implemented. MIMO schemes introduce another degree of freedom for radio resource allocation: the space domain. Contrary to the time and frequency domains, radio resources mapped into the spatial domain cannot be assumed as completely orthogonal, due to the amount of interference resulting from users transmitting in the same frequency sub-channel and/or time slots but in different spatial beams. Therefore, the availability of information regarding the state of radio resources, from lower to upper layers, is of fundamental importance in the prosecution of the levels of QoS expected from those multimedia applications. In order to match applications requirements and the constraints of the mobile radio channel, in the last few years researches have proposed a new paradigm for the layered architecture for communications: the cross-layer design framework. In a general way, the cross-layer design paradigm refers to a protocol design in which the dependence between protocol layers is actively exploited, by breaking out the stringent rules which restrict the communication only between adjacent layers in the original reference model, and allowing direct interaction among different layers of the stack. An efficient management of the set of available radio resources demand for the implementation of efficient and low complexity packet schedulers which prioritize user’s transmissions according to inputs provided from lower as well as upper layers in the protocol stack, fully compliant with the cross-layer design paradigm. Specifically, efficiently designed packet schedulers for 4G networks should result in the maximization of the capacity available, through the consideration of the limitations imposed by the mobile radio channel and comply with the set of QoS requirements from the application layer. IEEE 802.16e standard, also named as Mobile WiMAX, seems to comply with the specifications of 4G mobile networks. The scalable architecture, low cost implementation and high data throughput, enable efficient data multiplexing and low data latency, which are attributes essential to enable broadband data services. Also, the connection oriented approach of Its medium access layer is fully compliant with the quality of service demands from such applications. Therefore, Mobile WiMAX seems to be a promising 4G mobile wireless networks candidate. In this thesis it is proposed the investigation, design and implementation of packet scheduling algorithms for the efficient management of the set of available radio resources, in time, frequency and spatial domains of the Mobile WiMAX networks. The proposed algorithms combine input metrics from physical layer and QoS requirements from upper layers, according to the crosslayer design paradigm. Proposed schedulers are evaluated by means of system level simulations, conducted in a system level simulation platform implementing the physical and medium access control layers of the IEEE802.16e standard.

Uma proposta de framework como infra-estrutura de implementação de sistemas informacionais baseados na visão dos FRBR orientado a objetos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Um framework baseado em modelos para desenvolvimento de sistemas multimídia distribuídos autoadaptativos

Distributed multimedia systems have highly variable characteristics, resulting in new requirements while new technologies become available or in the need for adequacy in accordance with the amount of available resources. So, these systems should provide support for dynamic adaptations in order to adjust their structures and behaviors at runtime. This paper presents an approach to adaptation model-based and proposes a reflective and component-based framework for construction and support of self-adaptive distributed multimedia systems, providing many facilities for the development and evolution of such systems, such as dynamic adaptation. The propose is to keep one or more models to represent the system at runtime, so some external entity can perform an analysis of these models by identifying problems and trying to solve them. These models integrate the reflective meta-level, acting as a system self-representation. The framework defines a meta-model for description of self-adaptive distributed multimedia applications, which can represent components and their relationships, policies for QoS specification and adaptation actions. Additionally, this paper proposes an ADL and architecture for model-based adaptation. As a case study, this paper presents some scenarios to demonstrate the application of the framework in practice, with and without the use of ADL, as well as check some characteristics related to dynamic adaptation

Reengenharia do framework cosmos: uma solução para prover suporte e adaptações abertas.

Self-adaptive software system is able to change its structure and/or behavior at runtime due to changes in their requirements, environment or components. One way to archieve self-adaptation is the use a sequence of actions (known as adaptation plans) which are typically defined at design time. This is the approach adopted by Cosmos - a Framework to support the configuration and management of resources in distributed environments. In order to deal with the variability inherent of self-adaptive systems, such as, the appearance of new components that allow the establishment of configurations that were not envisioned at development time, this dissertation aims to give Cosmos the capability of generating adaptation plans of runtime. In this way, it was necessary to perform a reengineering of the Cosmos Framework in order to allow its integration with a mechanism for the dynamic generation of adaptation plans. In this context, our work has been focused on conducting a reengineering of Cosmos. Among the changes made to in the Cosmos, we can highlight: changes in the metamodel used to represent components and applications, which has been redefined based on an architectural description language. These changes were propagated to the implementation of a new Cosmos prototype, which was then used for developing a case study application for purpose of proof of concept. Another effort undertaken was to make Cosmos more attractive by integrating it with another platform, in the case of this dissertation, the OSGi platform, which is well-known and accepted by the industry

Foraging Behavior of the Swarm-founding Wasp Polybia (Trichothorax) sericea (Hymenoptera, Vespidae): Daily Resource Collection Activity and Flight Capacity

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Description of diet of pelagic fish in the southwestern Atlantic, Brazil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Paraná Basin: Mineral resource potentials in Brazil, Uruguay, and Paraguay

The Paraná Basin is a Western Gondwanan cratonic basin that is better defined as the Paraná depositional site, since it has a diverse history as a basin. Sedimentation started in the Ordovician-Silurian, followed by extensive marine Devonian deposition. A Late Paleozoic/ Triassic facies cycle wedge was clearly built during Pangean time. The Early Cretaceous was characterized by extensive basaltic lava flows immediately before the break-up of Pangea. Following these rifting and drifting processes, the basin's structural framework was totally rebuilt, generating new depositional sites in the Late Cretaceous to Tertiary. Based on more recent data, at least two different basins may be defined during the evolution of what was once considered a unique basin. Nevertheless, even if considered as a single basin, the sedimentary pile of the Paraná Basin has considerable economic potential, until now exploited only rudimentarily, except for its groundwater resources. Aggregates, limestones, clays, industrial sands, gems, dimension stones, hydrocarbons, coal, peat, and uranium are some of the potential mineral resources of this basin. Copyright © 1997 by V. H. Winston & Son, Inc. All rights reserved.

Mapeamento do contorno estrutural do embasamento da bacia sedimentar de Curitiba - PR

The sedimentary Curitiba basin is located in the Central-Southern part of the first Parananense plateau, and comprises Curitiba (PR), and part of the neighbour Municipalities (fig.1). It is supposed to be of Plio-Pleistocene age. It has a shallow sedimentary fulfillment, represented by the Guabirotuba formation (BIGARELLA and SALAMUNI, 1962) which is dristributed over a large area of about 3.000km2. The internal geometry, not entirely known yet, is actually object of detailed research, that shows its geological evolution to Cenozoic tectonic movements. For the purpose of this study the definition of the structural contour of the basement and their depo-centers is fundamental. This paper presents the results of the integration of surface and subsurface data, processed by statistical methods, which allowed a more precise definition of the morphostructural framework of the basement. For the analysis of the geological spacial data, specific softwares were used for statistical processing for trend surfaces analysis. The data used in this study are of following types: a) drilling logs for ground water; b) description of surface points of geological maps (CRPM, 1977); c) description of points of geotechnical drillings and down geological survey. The data of 223 drilling logs for ground water were selected out of 770 wells. The description files of 700 outcrops, as well as planialtimetric field data, were used for the localization of the basement outcrop. Thus, a matrix with five columns was set up: utm E-W (x) and utm N-S (y); surface altitude (z); altimetric cote of the contact between sedimentary rocks and the basement (k); isopachs (l). For the study of the basement limits, the analysis of surface trends of 2(nd) and 3(rd) degree polinomial for the altimetric data (figs. 2 and 3) were used. For the residuals the method of the inverse of the square of the distance (fig.4) was used. The adjustments and the explanations of the surfaces were made with the aid of multiple linear regressions. The analysis of 3rd degree polinomial trend surface (fig.3) confirmed that the basement tends to be more exposed towards NNW-SSE explaining better the data trend through an ellipse, which striking NE-SW and dipping SW axis coincides with the trough of the basin observed in the trending surface of the basement. The performed analysis and the respective images offer a good degree of certainty of the geometric model of the Curitiba Basin and of the morphostructure of its basement. The surface trend allows to sketch with a greater degree of confidence the structural contour of the topgraphic surface (figs. 5 and 6) and of the basement (figs. 7 and 8), as well as the delimitation of intermediate structural heights, which were responsible for isolated and assymmetric depocenters. These details are shown in the map of figures 9 and 10. Thus, the Curitiba Basin is made up by a structural trough stretching NE-SW, with maximum preserved depths of about 80m, which are separated by heights and depocenters striking NW-SE (fig. 11). These structural features seems to have been controlled by tectonic reactivation during the Tertiary (HASUI, 1990) and which younger dissection was conditioned by neotectonic processes (SALAMUNI and EBERT, 1994).

Environmental training in organisations: From a literature review to a framework for future research

Although the research on the relationship between human factors and environmental sustainability is slowly progressing, environmental training has attracted the most attention from researchers and practitioners. However, there remains a lack of research that integrates and systematises the available knowledge on organisational environmental training. Environmental training is fundamental to any successful activity of environmental management, conservation and recycling of resources. Thus, the aim of this paper was to present the results of a systematic literature review on environmental training in organisations. The main studies in this area were classified and coded, and a research agenda with 9 recommendations that may advance the field was presented. As a result of the gaps in the current literature, a framework was proposed aiming guide and strengthens the state-of-the-art research on environmental training. Additionally, results show that more research is needed on environmental training, combining training and green human resource management and defining/measuring the objectives of the environmental training actions. Future studies should also consider mixed methodologies and comparative perspectives. © 2013 Elsevier B.V. All rights reserved.

Spin squeezing and entanglement via finite-dimensional discrete phase-space description

We show how mapping techniques inherent to N2-dimensional discrete phase spaces can be used to treat a wide family of spin systems which exhibits squeezing and entanglement effects. This algebraic framework is then applied to the modified Lipkin-Meshkov-Glick (LMG) model in order to obtain the time evolution of certain special parameters related to the Robertson- Schrödinger (RS) uncertainty principle and some particular proposals of entanglement measure based on collective angular-momentum generators. Our results reinforce the connection between both the squeezing and entanglement effects, as well as allow to investigate the basic role of spin correlations through the discrete representatives of quasiprobability distribution functions. Entropy functionals are also discussed in this context. The main sequence correlations → entanglement → squeezing of quantum effects embraces a new set of insights and interpretations in this framework, which represents an effective gain for future researches in different spin systems. © 2013 World Scientific Publishing Company.

Environmental management and operational performance in automotive companies in Brazil: The role of human resource management and lean manufacturing

The main objective of this study is to verify the influence of Environmental Management (EM) on Operational Performance (OP) in Brazilian automotive companies, analyzing whether Lean Manufacturing (LM) and Human Resources (HR) interfere in the greening of these companies. Therefore, a conceptual framework listing these concepts was proposed, and three research hypotheses were presented. A questionnaire was elaborated based on this theoretical background and sent to respondents occupying the highest positions in the production/operations areas of Brazilian automotive companies. The data, collected from 75 companies, were analyzed using structural equation modeling. The main results are as follows: (a) the model tested revealed an adequate goodness of fit, showing that overall, the relations proposed between EM and OP and between HR, LM and EM tend to be statistically valid; (b) EM tends to influence OP in a positive and statistically weak manner; (c) LM has a greater influence on EM when compared to the influence HR has over EM; (d) HR has a positive relationship over EM, but the statistical significance of this relationship is less than that of the other evaluated relationships. The originality of this paper lies in its gathering the concepts of EM, LM, HR and OP in a single study, as they generally tend not to be treated jointly. This paper also provided valid empirical evidence for a littlestudied context: the Brazilian automotive sector. © 2012 Elsevier Ltd. All rights reserved.

Framework for implementation of the outcomes of the World Summit on Sustainable Development (WSSD) in the small island developing states of the Caribbean subregion

Includes bibliography

A modelling framework for assessing the economic impact of climate change in the Caribbean

Includes bibliography.

Interaction between GIS and hydrologic model: a preliminary approach using ArcHydro Framework Data Model

In different regions of Brazil, population growth and economic development can degrade water quality, compromising watershed health and human supply. Because of its ability to combine spatial and temporal data in the same environment and to create water resources management (WRM) models, the Geographical Information System (GIS) is a powerful tool for managing water resources, preventing floods and estimating water supply. This paper discusses the integration between GIS and hydrological models and presents a case study relating to the upper section of the Paraíba do Sul Basin (Sao Paulo State portion), situated in the Southeast of Brazil. The case study presented in this paper has a database suitable for the basin's dimensions, including digitized topographic maps at a 50,000 scale. From an ArcGIS®/ArcHydro Framework Data Model, a geometric network was created to produce different raster products. This first grid derived from the digital elevation model grid (DEM) is the flow direction map followed by flow accumulation, stream and catchment maps. The next steps in this research are to include the different multipurpose reservoirs situated along the Paraíba do Sul River and to incorporate rainfall time series data in ArcHydro to build a hydrologic data model within a GIS environment in order to produce a comprehensive spatial-temporal model.

Integração do framework manakin com a plataforma dspace para múltiplas apresentações visuais de informações nos repositórios digitais

Digital repositories are currently being used by education and research institutions in Brazil as an alternative for propagating scientific and academic results, mainly to reach institutional memory and visibility. However, the way these results are presented may influence their use, affecting user-system interaction through the interface components. Thus, it is possible to state that an unique digital information environment can offer different ways of visual presentation, customizing informational and visual components for specific users communities. In this context, tools are being developed as a resource to make access and use of information easier, and to increase the usability of digital informational environments. One of these tools, Manakin, is presented in this paper, as well as its integration with the DSpace platform, in order to enable multiple visual presentations, stressing the importance of the differentiation and direction of interfaces by a single repository to the various knowledge fields. So, results and examples of repositories with multiple visual presentations are introduced, to facilitate the use of the presented tool, as well as to reinforce the importance of a differentiated visual identity by areas of knowledge in a single repository, by means of literary and exploratory analysis.