Chronic Suppurative Otitis Media in Cleft Palate: Microorganism Etiology and Susceptibilities

Objective: To investigate the microbial etiology of suppurative chronic otitis media (SCOM) in patients with complete cleft lip and palate and isolated cleft palate and to determine the sensitivity of isolated microorganisms to antibiotics by drug diffusion from impregnated discs in agar and the minimum inhibitory concentration of each drug to these microorganisms by drug dilution in agar. Design/Patients: Effusion samples of SCOM obtained from 40 patients with cleft lip and palate registered at the Hospital for Rehabilitation of Craniofacial Anomalies, University of Sao Paulo, at Bauru, Brazil, were bacteriologically analyzed by cultures. The isolated bacteria were submitted to an in vitro susceptibility test to clinically used drugs. Results: Positive cultures were obtained in 100% of studied cases. Among the 57 strains observed, the most frequent were Pseudomonas aeruginosa (35%), Staphylococcus aureus (15.5%), Enterococcus faecalis (14%), and Proteus mirabilis (12%). The frequency of Gram-negative bacilli (enterobacteriaceae and nonfermentative bacilli) was 67%. Pseudomonas aeruginosa presented the highest sensitivity to ciprofloxacin, and enterobacteriaceae exhibited the highest sensitivity to gentamicin. The strains of S. aureus and E. faecalis presented the highest sensitivity to imipenem and sulfamethoxazole/trimethoprim, respectively. Conclusion: Patients with cleft lip and palate presenting with SCOM exhibited 100% positive cultures, with the highest frequency of Pseudomonas and enterobacteriaceae. With regard to the action of antibiotics, imipenem was effective against the four species of isolated microorganisms, followed by ciprofloxacin, which was effective against 75% of isolated species.

Improved Road Design for Future Maintenance - Analysis of Road Barrier Repair Costs

The cost of a road construction over its service life is a function of the design, quality of construction, maintenance strategies and maintenance operations. Unfortunately, designers often neglect a very important aspect which is the possibility to perform future maintenance activities. The focus is mainly on other aspects such as investment costs, traffic safety, aesthetic appearance, regional development and environmental effects. This licentiate thesis is a part of a Ph.D. project entitled “Road Design for lower maintenance costs” that aims to examine how the life-cycle costs can be optimized by selection of appropriate geometrical designs for the roads and their components. The result is expected to give a basis for a new method used in the road planning and design process using life-cycle cost analysis with particular emphasis on road maintenance. The project started with a review of literature with the intention to study conditions causing increased needs for road maintenance, the efforts made by the road authorities to satisfy those needs and the improvement potential by consideration of maintenance aspects during planning and design. An investigation was carried out to identify the problems which obstruct due consideration of maintenance aspects during the road planning and design process. This investigation focused mainly on the road planning and design process at the Swedish Road Administration. However, the road planning and design process in Denmark, Finland and Norway were also roughly evaluated to gain a broader knowledge about the research subject. The investigation was carried out in two phases: data collection and data analysis. Data was collected by semi-structured interviews with expert actors involved in planning, design and maintenance and by a review of design-related documents. Data analyses were carried out using a method called “Change Analysis”. This investigation revealed a complex combination of problems which result in inadequate consideration of maintenance aspects. Several urgent needs for changes to eliminate these problems were identified. Another study was carried out to develop a model for calculation of the repair costs for damages of different road barrier types and to analyse how factors such as road type, speed limits, barrier types, barrier placement, type of road section, alignment and seasonal effects affect the barrier damages and the associated repair costs. This study was carried out using a method called the “Case Study Research Method”. Data was collected from 1087 barrier repairs in two regional offices of the Swedish Road Administration, the Central Region and the Western Region. A table was established for both regions containing the repair cost per vehicle kilometre for different combinations of barrier types, road types and speed limits. This table can be used by the designers in the calculation of the life-cycle costs for different road barrier types.

Uma avaliação ex-ante do impacto sobre a capacidade tecnológica da localidade acolhedora das empresas que aderiram ao regime automotivo brasileiro e os seus desdobramentos estaduais : o caso da instalação da General Motors do Brasil em Gravataí, Rio Grande do Sul

Esta tese discute três temas: políticas públicas, gestão tecnológica, e setor automotivo. Tendo por objetivo abreviar o ciclo de absorção e desenvolvimento de tecnologia, um volume expressivo de recursos tem sido transferido do setor público para o setor privado através do que é denominado de Política Pública Indutora (PPI). Os governos pretendem, assim, atrair aquelas empresas tecnologicamente mais capacitadas, na expectativa de que transfiram para a localidade onde se instalam o conhecimento que detêm. No Brasil, um dos setores-alvo deste tipo de política tem sido o automotivo, circunstância observada em diferentes momentos da história. Efetivamente, o Regime Automotivo Brasileiro pretende não apenas acelerar o desenvolvimento do país, mas também promover uma significativa transferência de tecnologia. A análise das PPI, por ser de extrema importância, é bastante influenciada e dificultada quer por seus defensores, quer por seus destratores, que as veêm sob os aspectos de sucesso ou não; mas, não bastasse essa dificuldade, há também o elevado conteúdo ideológico que sustenta as argumentações, que faz com que a avaliação se perca num quadro inconclusivo. Afinal, estas iniciativas são benéficas ou não para o país e para as economias regionais? Finalmente, a eficácia, e portanto o acerto desta estratégia só pode ser avaliado expost facto, quando já comprometidos, quiçá irremediavelmente, os recursos públicos. Por essa razão, este estudo desenvolve uma análise ex-ante das políticas públicas do tipo indutoras, fazendo uso de um modelo compreensivo que permite uma análise longitudinal, captando assim, as mudanças no ambiente. Entre outras, procurou-se responder à seguinte questão: é possível, hoje, inferir quanto à contrib uição, se positiva ou negativa, que o Regime Automotivo Brasileiro e os seus desdobramentos estaduais trarão à capacidade tecnológica no entorno da empresa atraída? O problema e a questão de pesquisa foram abordados, predominantemente, sob um enfoque qualitativo, e o método escolhido foi o estudo de caso. Com o auxílio do modelo proposto foi analisada e avaliada a potencialidade de aumento na capacidade tecnológica induzida pela instalação da unidade montadora da General Motors do Brasil, em Gravataí, Rio Grande do Sul. Ao final conclui- se que os benefícios previstos pelo Regime Automotivo Brasileiro, no que diz respeito a capacitação tecnológica local, dificilmente serão atingidos pela instalação de novas empresas automotivas ou a modernização das existentes.

O envolvimento do departamento de compras no processo de contratação de serviços profissionais

A teoria sobre a atividade de Compras argumenta que as empresas deveriam delegar para esta área a atividade de adquirir insumos e serviços. O objetivo é obter competitividade sem perder a qualidade, através da competência e especialidade desta área. Em muitas empresas, esta área não é envolvida em todas as situações de processos de contratação. Poucos artigos e trabalhos publicados estudam a relação do cliente interno com o Departamento de Compras. Esta tese de doutorado tem como objetivo identificar os problemas que interferem no envolvimento do departamento de Compras, em processos de aquisição de serviços profissionais. A Teoria da Agência é utilizada como suporte teórico, por ser uma relação de um Principal, o cliente interno, e um Agente, o departamento de Compras. As hipóteses testadas verificaram se o envolvimento do Departamento de Compras difere por categoria de Compras e se tem relação com as premissas da Teoria da Agência. A pesquisa quantitativa teve 519 respostas de empresas nacionais e multinacionais no Brasil, de diversos setores da Economia. (367 de clientes internos e 152 de profissionais de Compras). Escalas utilizadas em trabalhos anteriores foram validadas, e os dados foram analisados a partir dos resultados da Análise de variância e de Regressão múltipla. O questionário foi disponibilizado na internet para os clientes internos do Departamento de Compras, com objetivo de focar nas razões do não envolvimento do departamento. Os resultados indicam que, na percepção dos clientes internos o envolvimento do departamento de Compras difere por tipo de serviço profissional. A relação entre as dimensões de envolvimento com as premissas da Teoria da Agência foi confirmada. As respostas recebidas dos profissionais de Compras confirmam que as percepções sobre o envolvimento do departamento de Compras diferem, ao comparar com as respostas dos clientes internos. A contribuição teórica foi de utilizar a Teoria da agência para estudos de problemas na cadeia de suprimentos, além da validação das escalas e a produção de pesquisa especificamente em categorias não relacionadas à produção. No campo gerencial, os resultados obtidos explicam a relação existente entre as quatro dimensões do envolvimento e a Teoria da Agência e são apresentadas as diferenças do envolvimento pela categoria a ser contratada.

Um estudo de caso sobre servitização e nacionalização em um fabricante de hardware elétrico

A presente dissertação tem como principais características, a pesquisa, a análise e a proposição de um modelo de reflexão que considera os fatores mais relevantes na inclusão do processo de prestação de serviços em empresas de manufatura de bens, e em particular de empresas que buscam a nacionalização de sua capacidade de fornecimento. Dentro deste conceito de transição e incorporação de serviços, que é denominado pela literatura como “servitização”, e usando como objeto de pesquisa uma empresa fabricante de hardware elétrico, verificou-se como se deu o planejamento e execução da servitização para prestação de serviços técnicos off-shore, ligados à cadeia de suprimentos do segmento de Produção de Óleo e Gás no mar. Para auxiliar o entendimento sobre o posicionamento da empresa perante serviços, servitização e nacionalização, foi necessária a revisão bibliográfica sobre Requisitos de Conteúdo Local, Gestão de Operações em Serviços, Sistemas Produto-Serviço, Servitização, e Desenvolvimento de Projeto de Produtos e Serviços. A partir da análise de documentação disponibilizada pela empresa, e a comparação desta com a literatura academica revisada, verificou-se que os modelos propostos pela literatura não contém todos os elementos necessários para aplicação direta em negócios deste tipo. Com base nesta avaliação, verifica-se quais os fatores mais relevantes para a servitização e propõe-se um modelo para reflexão. Modelo este que preenche com elementos mais específicos as lacunas que influenciam negativamente na excelência operacional e na estratégia da corporação ligada a indústria de Petróleo e Gás Off-shore.

Trabalho escravo contemporâneo e Estado capaz no Brasil

This thesis demonstrates the exercise of slave labor in the context of free or decent work, in contemporary times, supported by the federal constitution 1988 Brazil than places like fundamentals "the dignity of the human person" and "the social values of work and free enterprise" , and is as fundamental objectives of the Federative Republic of Brazil "build a free, just and united society," "guarantee national development", "eradicate poverty and marginalization and reduce social and regional inequalities", "promote the well all without prejudice of origin, race, sex, color, age and any other forms of discrimination. " It is considered that the analytical work category interacts both conceptually as an integral part of the capitalist development model as a driving force to the definition of State Capable. The panorama of acquired rights and rights infringed upon evidences the presence, or not, of the Brazilian state. Highlights, however, as state functions are being performed under the auspices of the Democratic State of Rights. So the original question that motivated this work is: To what extent the Brazilian government is structured to implement measures that can eradicate modern-day slavery? This question led to questions as: The Brazilian state has never failed in implementing the policy of "eradication to work analogous to slavery"? The answer the research questions were outlined using the dialectical materialist historical method under a sociological perspective in order to draw relationships and interrelationships between the current situation of the concept contemporary slavery and its historical roots. In the theoretical framework considers the conceptual approach regarding the capable state in order to answer the question regarding the eradication policy to contemporary forced labor and the Brazilian nation-state's ability to put it into action. In this sense, it employed concepts such as state, nation-state and capable state, from the interpretations of Bresser-Pereira, including the discussion regarding the formation of the arrangements and conservative and progressive political alliances. The research subject was analyzed from the reports published in 2013 by the Ministry of Labour after the Special Group of the inspection actions for Mobile Inspection (GEFM) to Combat Labour Analogous to Slave. The study of public policies related to the eradication program to work analogous to slavery takes up the discussion regarding the conditionality of free labor, or decent, in contemporary Brazil, and reveals that in Brazil the effectiveness or efficacy of government actions comply with governing the Federal Constitution-88, namely, to preserve "the dignity of the human person" and "the social values of work and free enterprise" is an ongoing process. There are advances, but these are conditioned to Brazil stage in the formation of the nation state and the national society.

Mechanical behavior of natural fiber composites

The use of natural fibers as reinforcement in polymeric composites for technical applications has been a research subject of scientists during the last decade. There is a great interest in the application of sisal fiber as substitutes for glass fibers, motivated by potential advantages of weight saving, lower raw material price, and ecological advantages of using green resources which are renewable and biodegradable.Castor oil, a triglyceride vegetable that has hydroxyl groups, was reacted with 4,4' diphenylmethane diisocyanate (MDI) to produce the polyurethane matrix. Woven sisal fibers were used untreated and thermal treated at 60 C for 72h, and the composites were processed by compression molding.The present work study tensile behavior at four composites: dry sisal/polyurethane, humid sisal/polyurethane, dry sisal/phenolic and humid sisal/phenolic resin. The moisture content influences of sisal fibers on the mechanical behaviors were analyzed.Experimental results showed a higher tensile strength for the sisal/phenolic composites followed by sisal/polyurethane, respectively. In this research, sisal composites were also characterized by scanning electron microscopy. (C) 2011 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of ICM11

Ética na pesquisa em turismo: percepções de discentes de programas de pós-graduação stricto sensu em turismo UFRN, UCS e UNIVALI

This study analyzed the perception of ethics on the part of students of Post-graduation in Tourism, to develop their academic research. It is characterized as exploratory-descriptive, being considered quantitative with some elements analyzed qualitatively. Data were collected through an electronic questionnaire, originated in google docs and sent via e-mail to 54 students in three graduate programs in Tourism: The Tourism Master of the Federal University of Rio Grande do Norte (UFRN), the Master in Tourism and Hospitality of the University of Vale do Itajai (UNIVALI) and Master of Tourism at the University of Caxias do Sul (UCS), resulting in 22 responses. The study presents a profile of the dissertation research of post-graduate students, their perception about research ethics, as well as the difficulties encountered in the research process. Notes that research of dissertation are geared mostly for the historical and cultural aspects of tourism and the choice of topics for the essays came in first place, due to the influence of the guiding lines of research and, secondly, due to social relevance. The methods used in post-graduate research are descriptive, the literature and exploratory. It also notes that most students graduate in tourism (81%) attaches great importance to ethics in carrying out their dissertation research, students claim that ethics brings credibility and seriousness to research. Furthermore, it was realized that they have no knowledge about the practice of misconduct by researchers in the field of Tourism. Demonstrate that the major ethical challenge encountered by students is in relationship with the research subject, what happens during data collection. It also notes that none of the respondents sent any project to be evaluated by an Ethics Committee (CEP), moreover, most do not know the resolution 196/96, which has the main guidelines on research ethics at national level. Concludes that the students post-graduate in tourism have little knowledge about the standards and guidelines on research ethics. They demonstrate ignore the benefits of research ethics in regarding the protection and preservation of the participant, as well as the benefits it generates for society

Democratização do acesso a água no semi-árido: o caso da comunidade rural de Pendências dos Emídios no município de Serrinha/RN

Brazil lives a time of experimentation and maturity as it pertains to managing the use of water, which comes institutionalising increasingly social participation. In Rio Grande do Norte, since 1997, the government has been developing actions accordingly, through the State Department of Water Resources, which has implemented a programme of adutoras within the State and created Water Users Associations, in the installation of dessalinizadores for places where the Adutora was not necessary or not yet arrived, so that should be managed by communities through associations of users. Since 2003, Civil Society Organisations - CSOs come through ASA - Articulation in the Semi-arid Brazilian, implementing the P1MC - Program of Training and Mobilization for Social Living with the Semi-Arid (One Million Rural Cisternas), in its third year of implementation in Rio Grande do Norte, in the spirit of working together with the semi arid. In the municipality of Serrinha / RN which incorporates the Semi-arid region, we find in the rural community of Pendêcias dos Emídios the experience of the State and Civil Society, which referred to a discussion about the environmental sustainability of these initiatives. The general objective of this work is to examine the strategies for participatory management in the use and access to water in the community of Pendêcias dos Emídios of the municipality of Serrinha / RN, to understand how those experiences can contribute to environmental sustainability. The methodology used envolvel bibliographic research in categories involving each article, the analysis of the terms of reference of each strategy as part of the documentary research, the application forms covering 40 families benefited, and interviews based on comprehensive analysis of the speech. This study is divided into 02 articles, where the first is a discussion held on collective action and environmental sustainability, and the second is held a discussion about the sustainability of the initiatives underway to access water. The results of the discussion held on 02 articles that had their empirical built from the experience of the Commonwealth of Pendências dos Emídios revealed how far will the ability of the State to promote collective action and the limitations of the perception of sustainability that permeates these initiatives in the search for democratic access to water in semi-arid

Autologous implant of bone marrow mononuclear cells as treatment of induced equine tendinitis

Superficial digital flexor tendonitis is an important cause of lameness in horses and its incidence ranges from 13% to 30%, depending on the horse's activity. This injury can occur in yearlings and compromise its carriers by reinjury or even impossibility to return to athletic life. In spite of the long period required for tendon repair, the scar tissue presents lack of elasticity and stiffness. As current treatment strategies produce only marginal results, there has been great interest in research of therapies that influence the quality or the speed of tendon repair. Stem cell therapy has shown promising results in degenerative diseases and cases of deficient healing processes. This study aims to evaluate the influence of autologous mesenchymal bone marrow stem cells in tendon healing, comparing treated and non-treated tendons. Superficial digital flexor tendonitis lesions were induced by collagenase infiltration in both forelimbs of 6 horses, followed by autologous implant in one of the forelimbs of each animal. The horses were evaluated using clinical, ultrasonographic, histopathologic, and immunohistochemical parameters. Tendon biopsies were performed at Day 48. Results found in the treatment group, such as high inflammatory cells infiltration, extracellular matrix synthesis, reduced amount of necrosis areas, small increase in cellular proliferation (KI-67/MIB-1), and low immunoreactivity to transforming growth factor P I, suggested the acceleration of tendon repair in this group. Further studies should be conducted in order to verify the influence of this treatment on later phases of tendon repair. Overall, after analysis of the results, we can conclude that cellular therapy with the mononuclear fraction of bone marrow has accelerated tendon repair at 48 days after treatment.

Detection of Hepatozoon spp in naturally infected Brazilian dogs by polymerase chain reaction

Hepatozoon canis was molecularly identified in Rio de Janeiro State, Brazil. Twelve dogs from urban areas were studied by blood smear examination and the polymerase chain reaction (PCR) assay. From these dogs, only 1 was positive in both blood smears and PCR.

In vitro study of the Nd : YAG laser effect on human dental enamel: Optical and scanning electron microscope analysis

Objective: the Nd:YAG laser irradiation of dental enamel was evaluated in enamel demineralization experiments in a Streptococcus mutans culture media. Summary Background Data: Previous studies had shown that a continuous wave Nd:YAG laser at an energy of approximately 67 mJ may induce an increased acid resistance in human dental enamel when exposed to severe demineralization conditions. Methods: Enamel windows of 3 x 4 cm in the buccal surface were irradiated with a continuous wave Nd:YAG laser at a wavelength of 1,064 Ecm using energy densities of from 83.75 to 187.50 J/cm(2), Enamel windows of 3 x 4 cm on the lingual surface served as control (without the laser irradiation). The enamel windows were then exposed to a Streptococcus mutans culture media at a temperature of 37 degrees C for 15 and 21 days. The laser effects and demineralization were examined both by optical microscopy and scanning electron microscopy (SEM), Results: A comparison between the lased and the unlased windows of enamel showed fusion and recrystalization of the enamel and increased acid-resistance in all groups irradiated with the Nd:YAG laser, on the other hand, the 3 x 4 delimited enamel surfaces from the control group (not irradiated with the Nd:YAG laser) showed 100% deminerization, Conclusions: These findings are consistent with the finding that laser irradiation of dental results in significant reduction of the effective solubility of enamel mineral.

Dentin bond strength: Influence of laser irradiation, acid etching, and hypermineralization

Objective: the purpose of the present study was to investigate the effects of ND:YLF laser irradiation (1.31 J/cm(2); 250 mJ per pulse), acid etching, and hypermineralization on the shear bond strength (SBS) of the Scotchbond Multi-Purpose Plus (3M Dental Products) bonding system. Summary Background Data: Previous studies had shown that the pretreatment of the dentin substrate with laser irradiation can influence the SBS, Methods: Sixty bovine incisors were selected and stored at -18 degrees C, Dentinal buccal surface was exposed and radiographs were taken to control dentin thickness, the specimens were separated into 2 groups: (1) the control, which was kept in distilled water at 4 degrees C; (2) the hypermineralized, which was kept in hypermineralizing solution at 4 degrees C for 14 days, Each group was divided into 3 subgroups according to the type of dentin pretreatment used: M (acid etching + primer + bond); AL (acid etching + primer + bond + laser); and LA (laser + acid etching + primer + bond). A standard composite resin cylinder (Z100-3M) was bonded to the dentinal surface and the SBS performed on an Instron machine (500 Kg load cell at 0.5 mm/min), followed by scanning electron microscopy (SEM) and x-ray diffraction analysis. Results: Analysis of variance (ANOVA) determined that the pretreatments influenced the SBS values (p < 0.05): AL (9.96 MPa), M (7.28 MPa), and LA (4.87 MPa), the interaction between the group and pretreatment factors also influenced the SBS (p < 0.05). The highest values were obtained for the interaction control/AL (11.64 MPa), Conclusion: the results suggested that dentin treatment with laser after the application of the adhesive system is efficient in achieving higher bond strength and is promising as a possible new adhesive substrate.

Study of microleakage at class V cavities prepared by Er : YAG laser using rewetting surface treatment

Objective: This study was conducted to analyze microleakage in Class V cavity preparation, using rewetting (or not) just after burr or Er:YAG laser preparation of enamel and dentin walls in permanent teeth. Background Data: Several studies reported microleakage around composite restorations when cavity preparation was done or treated by Er:YAG laser. As the hybridized laser is removed when this laser is used to cut dental hard tissue, there is a need for new materials or techniques to minimize gaps and microleakage. Results: Primer solution showed significant effect in enamel and dentin, at the level of 5%, when Er:YAG laser was used as a cutting tool. Using primer solution after phosphoric acid in preparations with the laser, microleakage was similar in degree to when cavities were prepared with the burr. Conclusion: Re-wetting surface just after Er:YAG irradiation and chemical treatment with phosphoric acid using HEMA aqueous solution seems to improve the quality of bioattachment between the adhesive system and enamel/dentin, showing similarities between restoration behaviors independently of the cutting tool, whether burr or laser.

Effect of combined bending strain and thermal cycling on the voltage-current characteristic curves of Bi-2223 tapes

High critical temperature superconductors are evolving from a scientific research subject into large-scale application devices. In order to meet this development demand they must withstand high current capacity under mechanical loads arising from thermal contraction during cooling from room temperature down to operating temperature (usually 77 K) and due to the electromagnetic forces generated by the current and the induced magnetic field. Among the HTS materials, the Bi2Sr2Ca2Cu3Ox, compound imbedded in an Ag/AgMg sheath has shown the best results in terms of critical current at 77 K and tolerance against mechanical strain. Aiming to evaluate the influence of thermal stress induced by a number of thermal shock cycles we have evaluated the V-I characteristic curves of samples mounted onto semicircular holders with different curvature radius (9.75 to 44.5 mm). The most deformed sample (epsilon = 1.08%) showed the largest reduction of critical current (40%) compared to the undeformed sample and the highest sensitivity to thermal stress (I-c/I-c0 = 0.5). The V-I characteristic curves were also fitted by a potential curve displaying n-exponents varying from 20 down to 10 between the initial and last thermal shock cycle.