Estudo de tratamentos prévios para o controlo de acastanhamento de cenoura secada

O objetivo deste trabalho foi avaliar o efeito de compostos químicos como o ácido ascórbico e metabissulfito de sódio na inibição do acastanhamento em cenoura (Daucus carota L.), da variedade Nantes, sujeita a secagem, por convecção (60ºC e 40ºC). Por outro lado, estudou-se o efeito da aplicação de extratos naturais como os de chá verde e branco, aliados ao branqueamento, baseados na sua atividade antioxidante natural. As amostras foram sujeitas a ácido ascórbico e metabissulfito de sódio nas concentrações de 0,25% (m/v) e 1% (m/v), durante 60 min e 90 min e foi efetuado um controlo em água destilada (sem agente anti-escurecimento) nos mesmos períodos de tempo mencionados anteriormente. Os testes de branqueamento foram pré-estabelecidos, através do teste da peroxidase para a determinação do binómio tempo-temperatura adequado a cada tratamento térmico. Procedeu-se à análise das propriedades químicas (humidade, proteína, cinza, fibra bruta, açúcares, compostos fenólicos e atividade antioxidante), propriedades fisicas (textura e cor), no estado fresco e após as secagens. Quanto aos resultados obtidos, verificou-se que, de forma geral, a secagem a 60ºC conduziu a alterações mais notórias nas propriedades químicas analisadas, nomeadamente ao nível das proteínas e dos açúcares redutores. No que respeita à atividade antioxidante, as alterações foram pouco evidentes com o aumento da temperatura de secagem, porém comparativamente com a amostra em fresco, ocorreram perdas. Quanto ao teor de polifenóis totais, de forma geral, também ocorreram perdas, ocasionadas, possivelmente, por reações de acastanhamento enzimático. Quanto à análise da cor a secagem a 40ºC conduziu a maiores alterações em termos de luminosidade, sendo os tratamentos com infusões de chá os que se aproximaram mais à amostra em fresco. Em termos de diferença de cor total, a secagem a 40ºC conduziu a maiores variações, sendo os pré-tratamentos térmicos os que registaram menores variações. Quanto ao índice de acastanhamento, a secagem a 40ºC, apresentou resultados mais baixos, sendo os pré-tratamentos químicos aqueles que apresentaram os menores valores. Em relação à textura, registaram-se valores semelhantes em termos de elasticidade e coevisidade mas uma diminuição significativa da dureza e da mastigabilidade das amostras secadas quando comparadas com a amostra em fresco.

Physico-chemical properties of sol-gel synthesized titanosilicates for the uptake of radionuclides from aqueous solutions

Harnessing the power of nuclear reactions has brought huge benefits in terms of nuclear energy, medicine and defence as well as risks including the management of nuclear wastes. One of the main issues for radioactive waste management is liquid radioactive waste (LRW). Different methods have been applied to remediate LRW, thereunder ion exchange and adsorption. Comparative studies have demonstrated that Na2Ti2O3SiO4·2H2O titanosilicate sorption materials are the most promising in terms of Cs+ and Sr2+ retention from LRW. Therefore these TiSi materials became the object of this study. The recently developed in Ukraine sol-gel method of synthesizing these materials was chosen among the other reported approaches since it allows obtaining the TiSi materials in the form of particles with size ≥ 4mm. utilizing inexpensive and bulk stable inorganic precursors and yielded the materials with desirable properties by alteration of the comparatively mild synthesis conditions. The main aim of this study was to investigate the physico-chemical properties of sol-gel synthesized titanosilicates for radionuclide uptake from aqueous solutions. The effect of synthesis conditions on the structural and sorption parameters of TiSi xerogels was planned to determine in order to obtain a highly efficient sorption material. The ability of the obtained TiSis to retain Cs+, Sr2+ and other potentially toxic metal cations from the synthetic and real aqueous solutions was intended to assess. To our expectations, abovementioned studies will illustrate the efficiency and profitability of the chosen synthesis approach, synthesis conditions and the obtained materials. X-ray diffraction, low temperature adsorption/desorption surface area analysis, X-ray photoelectron spectroscopy, infrared spectroscopy and scanning electron microscopy with energy dispersive X-ray spectroscopy was used for xerogels characterization. The sorption capability of the synthesized TiSi gels was studied as a function of pH, adsorbent mass, initial concentration of target ion, contact time, temperature, composition and concentration of the background solution. It was found that the applied sol-gel approach yielded materials with a poorly crystalline sodium titanosilicate structure under relatively mild synthesis conditions. The temperature of HTT has the strongest influence on the structure of the materials and consequently was concluded to be the control factor for the preparation of gels with the desired properties. The obtained materials proved to be effective and selective for both Sr2+ and Cs+ decontamination from synthetic and real aqueous solutions like drinking, ground, sea and mine waters, blood plasma and liquid radioactive wastes.

Desenvolvimento de um aditivo natural à base de catequina: otimização da extração e estabilização a partir de frutos de Arbutus unedo L.

The common Mediterranean ornamental strawberry-tree (Arbutus unedo L.) produces an edible reddish sweet berry that is found to be bland and tasteless unless it is consumed overripe, otherwise it is discarded or used as basic agricultural sub residue. The bioactive properties of this fruit have been reported and related with phenolic compounds, mainly flavan-3-ols, such as catechin and procyanidins, which has opened the opportunity to exploit their extraction from alternative sources.The common Mediterranean ornamental strawberry-tree (Arbutus unedo L.) produces an edible reddish sweet berry that is found to be bland and tasteless unless it is consumed overripe, otherwise it is discarded or used as basic agricultural sub residue. The bioactive properties of this fruit have been reported and related with phenolic compounds, mainly flavan-3-ols, such as catechin and procyanidins, which has opened the opportunity to exploit their extraction from alternative sources. This study compares and optimizes the maceration, microwave and ultrasound extraction techniques in the recovery of a catechin extract from Arbutus unedo L. fruits and evaluate the stability of flavan-3-ols during storage and application processes. To obtain conditions that maximize the catechin extraction yield, a response surface methodology was used. Maceration and microwave extractions were found to be the most effective methods, capable of yielding 1.38±0.1 and 1.70±0.3 mg of catechin/g dry weight (dw) in the corresponding optimal extraction conditions. The optimal conditions for maceration were 93.2±3.7 min, 79.6±5.2 ºC and 23.1±3.7 % of ethanol, while for the microwave extraction were 42.2±4.1 min, 137.1±8.1 ºC and 12.1±1.1 % of ethanol. The microwave system was a quicker solution, conducting to slightly higher yields of catechin than maceration, but this one needed lower temperatures to reach similar yields. The ultrasound method was the least effective solution in terms of catechin yield extraction (0.71±0.1 mg/g at 42.4±3.6 min, 314.9±21.2 W and 40.3±3.8 %. ethanol). The stability was tested with of the catechin-enriched extract (60% flavan-3-ols and 22% catechin), obtained under the best maceration conditions, was tested. Therefore, catechin-enriched extracts were submitted to physical and chemical stability studies, considering the main affecting variables (time, temperature and pH): i) a stability study of the extracts during storage as powder system; and ii) a stability study of the extracts in simulated food environment (aqueous solution system). The measured responses were the flavan-3-ols and catechin contents, determined by HPLC-DAD, and the antioxidant activity of the extracts evaluated by hydrophilic assays. Mechanistic and phenomenological equations were used to describe the responses, and the optimal conditions for flavan-3-ols (including catechin) stability as powder extract during a month were pH= 5.4 and T= -20ºC; while its stability in aqueous solution remained during the 24 h of application at pH<4 and T<30ºC. This study compares and optimizes the maceration, microwave and ultrasound extraction techniques in the recovery of a catechin extract from Arbutus unedo L. fruits and evaluate the stability of flavan-3-ols during storage and application processes. To obtain conditions that maximize the catechin extraction yield, a response surface methodology was used. Maceration and microwave extractions were found to be the most effective methods, capable of yielding 1.38±0.1 and 1.70±0.3 mg of catechin/g dry weight (dw) in the corresponding optimal extraction conditions. The optimal conditions for maceration were 93.2±3.7 min, 79.6±5.2 ºC and 23.1±3.7 % of ethanol, while for the microwave extraction were 42.2±4.1 min, 137.1±8.1 ºC and 12.1±1.1 % of ethanol. The microwave system was a quicker solution, conducting to slightly higher yields of catechin than maceration, but this one needed lower temperatures to reach similar yields. The ultrasound method was the least effective solution in terms of catechin yield extraction (0.71±0.1 mg/g at 42.4±3.6 min, 314.9±21.2 W and 40.3±3.8 %. ethanol). The stability was tested with of the catechin-enriched extract (60% flavan-3-ols and 22% catechin), obtained under the best maceration conditions, was tested. Therefore, catechin-enriched extracts were submitted to physical and chemical stability studies, considering the main affecting variables (time, temperature and pH): i) a stability study of the extracts during storage as powder system; and ii) a stability study of the extracts in simulated food environment (aqueous solution system). The measured responses were the flavan-3-ols and catechin contents, determined by HPLC-DAD, and the antioxidant activity of the extracts evaluated by hydrophilic assays. Mechanistic and phenomenological equations were used to describe the responses, and the optimal conditions for flavan-3-ols (including catechin) stability as powder extract during a month were pH= 5.4 and T= -20ºC; while its stability in aqueous solution remained during the 24 h of application at pH<4 and T<30ºC.

Desenvolvimento de indicadores enzimáticos inteligentes para monitoramento da qualidade de alimentos

A dificuldade em conhecer o histórico de temperatura de um alimento, desde sua produção até o consumo, torna difícil prever sua verdadeira vida-útil. O uso de indicadores de tempo e temperatura (ITT) pode ser uma alternativa inovadora empregada para garantir a validade de produtos de forma dinâmica. Assim, este trabalho visa desenvolver novos indicadores enzimáticos de tempo e temperatura para monitorar a qualidade de alimentos perecíveis durante o seu processamento e armazenamento, baseados na reação de complexação entre o amido e o iodo (azul), e na posterior atuação de uma enzima amilase sobre esse complexo, para causar uma redução da intensidade da cor azul a uma taxa dependente do tempo e da temperatura de armazenagem. Os sistemas inteligentes propostos possuem versatilidade de atuação em função do tipo e quantidade de amilase empregada. Desta forma, foi utilizada uma amilase termoestável para a formulação de um indicador inteligente de processamento, utilizado para o controle de tratamentos térmicos industriais (pasteurização);e uma amilase termosensível na formulação de um indicador de armazenamento, empregada para o controle das condições de temperatura durante a cadeia de frio de produtos perecíveis. Na elaboração dos ITT de processamento foram realizadas simulações em laboratório e testes em planta fabril, os quais avaliaram diferentes concentrações de amilase termoestável nos protótipos de ITT quando submetidos as condições de tempo e temperatura de pasteurização. Os resultados evidenciaram que a resposta de cor dos indicadores foi visualmente interpretada, como adaptável à medição usando equipamentos, apresentando boa reprodutibilidade em todas as condições estudadas. O ITT contendo 6,5 % de amilase termoestável (penzima/pamido) foi aquele cujo resultado melhor se adequou à utilização na validação de cozimento de presunto. Nesta condição, o protótipo anexado à embalagem primária do produto indicou o processo de pasteurização de forma fácil, precisa e não destrutiva. Já durante o desenvolvimento do ITT de armazenamento foram realizadas simulações em laboratório, testes em planta fabril e ponto de venda, os quais avaliaram o uso de diferentes concentrações de amilase termosensível nos protótipos de ITT quando submetidos a diversas condições de cadeia de frio. Os resultados evidenciaram que devido à possibilidade de definir a vida-útil destes protótipos variando as concentrações de enzima termosensível, os indicadores podem ser facilmente adaptados para controlar as condições de temperatura durante a cadeia de diversos alimentos perecíveis. O protótipo contendo 60 % de amilase termosensível (penzima/pamido) foi aquele cujo resultado melhor se adequou à utilização no controle da cadeia avícola. Assim, o ITT indicou visualmente o histórico de tempo e temperatura de produtos à base de frango de forma fácil e precisa. Os resultados obtidos na avaliação das percepções dos consumidores frente ao emprego de indicadores inteligentes em embalagens alimentícias mostraram que o uso de ITT é uma inovação receptiva, com consequente aceitação e intenção de compra elevada pela população brasileira. Assim, com este trabalho espera-se contribuir efetivamente para que o conceito de embalagens inteligentes possa ser aceito comercialmente e que sejam estabelecidas no Brasil normas que regulamentem seu uso, conferindo benefícios à conservação de grande variedade de alimentos.

Proper holding temperatures

Proper holding temperatures will ensure that Time/Temperature Control for Safety foods are not in the temperature danger zone (between 45°F and 130°F) while food items are held for further preparation and/or consumption. Hot foods must be maintained at or above 130°F. Cold foods must be maintained at or below 45°F. It also contains a holding temperature log template for use in restaurants.

Las temperaturas adecuadas de conservación

Proper holding temperatures will ensure that Time/Temperature Control for Safety foods are not in the temperature danger zone (between 45°F and 130°F) while food items are held for further preparation and/or consumption. Hot foods must be maintained at or above 130°F. Cold foods must be maintained at or below 45°F. It also contains a holding temperature log template for use in restaurants.

Proper cooling temperatures

Proper cooling temperatures will prevent microbial growth by helping limit the time that food is exposed to the temperature danger zone. After cooking or heating, Time/Temperature for Safety (TCS) foods must be cooled quickly: From 130°F to 70°F within 2 hours, and From 70°F to 45°F within 4 hours. This sheet also contains a rapid cooling temperature log template.

Las temperaturas apropiadas de enfriamiento

Proper cooling temperatures will prevent microbial growth by helping limit the time that food is exposed to the temperature danger zone. After cooking or heating, Time/Temperature for Safety (TCS) foods must be cooled quickly: From 130°F to 70°F within 2 hours, and From 70°F to 45°F within 4 hours. This sheet also contains a rapid cooling temperature log template.

Flowers of Gomphrena globosa L. as an alternatve source of betacyanins: optimization of the extraction using response surface methodology

Betacyanins are betalain pigments that display a red-violet colour which have been reported to be three times stronger than the red-violet dye produced by anthocyanins [1]. The applications of betacyanins cover a wide range of matrices, mainly as additives or ingredients in the food industry, cosmetics, pharmaceuticals and livestock feed. Although, being less commonly used than anthocyanins and carotenoids, betacyanins are stable between pH 3 to 7 and suitable for colouring in low acid matrices. In addition, betacyanins have been reported to display interesting medicinal character as powerful antioxidant and chemopreventive compounds either in vitro or in vivo models [2]. Betacyanins are obtained mainly from the red beet of Beta vulgaris plant (between I 0 to 20 mg per I 00 g pulp) but alternative primary sources are needed [3]. In addition, independently of the source used, the effect of the variables that affect the extraction of betacyanins have not been properly described and quantified. Therefore, the aim of this study was to identifY and optimize the conditions that maximize betacyanins extraction using the tepals of Gomphrena globosa L. flowers as an alternative source. Assisted by the statistical technique of response surface methodology, an experimental design was developed for testing the significant explanatory variables of the extraction (time, temperature, solid-liquid ratio and ethanolwater ratio). The identification was performed using high-performance liquid chromatography coupled with a photodiode array detector and mass spectrometry with electron spray ionization (HPLC-PDAMS/ ESI) and the response was measured by the quantification of these compounds using HPLC-PDA. Afterwards, a response surface analysis was performed to evaluate the results. The major betacyanin compounds identified were gomphrenin 11 and Ill and isogomphrenin IJ and Ill. The highest total betacyanins content was obtained by using the following conditions: 45 min of extraction. time, 35•c, 35 g/L of solid-liquid ratio and 25% of ethanol. These values would not be found without optimizing the conditions of the betacyanins extraction, which moreover showed contrary trends to what it has been described in the scientific bibliography. More specifically, concerning the time and temperature variables, an increase of both values (from the common ones used in the bibliography) showed a considerable improvement on the betacyanins extraction yield without displaying any type of degradation patterns.

La perception du temps et sa modulation par la température chez les guêpes parasitoïdes

Les modèles d'optimalité postulent que les animaux en quête de ressources utilisent le taux de gain de valeur adaptative pour optimiser plusieurs comportements tels que la répartition du temps lors de l’exploitation d‘un agrégat et l'investissement en progénitures. Bien que la durée de plusieurs comportements doit être régulée, peu d’évidences de la perception du temps sont actuellement disponibles pour les insectes et aucune pour les guêpes parasitoïdes, et ce malgré leur importance en tant que modèles écologiques. De plus, puisque les guêpes parasitoïdes sont poïkilothermes, cette capacité pourrait être affectée par la température. Nous avons supposé que les guêpes parasitoïdes auraient la capacité de percevoir le temps, à la fois de façon prospective (mesure du temps écoulé) et rétrospective (durée d'un événement passé), afin d'optimiser les décisions liées à l'exploitation d’agrégats d’hôtes et à la reproduction. Nous avons également émis l'hypothèse que la température aurait une incidence sur la perception du temps des guêpes parasitoïdes. Pour la mesure prospective du temps, nous avons utilisé la capacité d’apprentissage associatif de Microplitis croceipes (Hymenoptera: Braconidae). Les guêpes ont été entraînées à associer une odeur à la durée d'un intervalle entre des hôtes. Après leur entraînement, elles ont été testées dans un tunnel de vol avec un choix d’odeurs. Les guêpes ont choisi majoritairement l'odeur associée à l'intervalle de temps auquel elles étaient testées. Nous avons également investigué le rôle de la dépense énergétique sur la mesure du temps. Suite à une restriction de mouvement des guêpes pendant l'intervalle de temps entre les hôtes, elles choisissaient aléatoirement dans le tunnel de vol. L'absence de dépense énergétique les aurait rendues incapables de mesurer le temps. La dépense d'énergie est donc un substitut essentiel pour mesurer le temps. Pour la mesure rétrospective du temps, nous avons utilisé le processus d'évaluation de l'hôte de Trichogramma euproctidis (Hymenoptera: Trichogrammatidae). Certains trichogrammes utilisent la durée du transit initial sur l'œuf hôte afin d’en évaluer la taille et d’ajuster le nombre d’œufs à y pondre. Nous avons augmenté artificiellement la durée de transit initiale de T. euproctidis en suspendant l'œuf hôte pour le faire paraître plus gros qu'un œuf de taille similaire. Une augmentation de la durée de transit initiale a augmenté la taille de la ponte. Ceci démontre la capacité de T. euproctidis de mesurer la durée du transit initial, et donc d’une mesure du temps rétrospective. Pour déterminer si la température modifie la mesure du temps dans les espèces poïkilothermes, nous avons utilisé le comportement d’exploitation d’agrégats d’hôtes de T. euproctidis. Les modèles d’optimalités prédisent que les guêpes devraient rester plus longtemps et quitter à un faible taux de gain de valeur adaptative suite à un déplacement de longue durée plutôt que pour un déplacement de courte durée. Nous avons testé l'impact d'un déplacement de 24 h à différentes températures sur l'exploitation d’agrégats d’hôtes. Un déplacement à température chaude augmente le temps de résidence dans l’agrégat et diminue le taux de gain de valeur adaptative au moment de quitter ; ces comportements sont associés à un trajet de longue durée. L'inverse a été observé lors d’un déplacement à une température froide. Les températures chaude et froide ont modulé la mesure du temps en accélérant ou ralentissant l'horloge biologique, faisant paraître le déplacement respectivement plus long ou plus court qu’il ne l’était réellement. Ces résultats démontrent clairement que les guêpes parasitoïdes ont la capacité de mesurer le temps, autant rétrospectivement que prospectivement. Des preuves directes de leur capacité sont maintenant disponibles pour au moins deux espèces de guêpes parasitoïdes, une composante essentielle des modèles d'optimalité. Le rôle de la dépense énergétique dans la mesure du temps a aussi été démontré. Nos résultats fournissent également la preuve de l'impact de la température sur la perception du temps chez les insectes. L'utilisation de la dépense énergétique en tant que proxy pour mesurer le temps pourrait expliquer une partie de sa thermosensibilité, puisque les guêpes parasitoïdes sont poïkilothermes. Cette mesure du temps sensible à la température pourrait affecter des stratégies de lutte biologique. Sur le terrain, au début de la journée, la température de l'air sera similaire à la température de l'air autour des plantes infestées par des parasites, alors qu'elle sera plus chaude pendant la journée. En lutte biologique augmentative, les guêpes parasitoïdes libérées resteraient plus longtemps dans les agrégats d’hôtes que celles relâchées en début de journée.

Síntese de pigmento cerâmico ferrita de cobalto utilizando planejamento experimental

Synthetic inorganic pigments are the most widely used in ceramic applications because they have excellent chemical and thermal stability and also, in general, a lower toxicity to man and to the environment. In the present work, the ceramic black pigment CoFe2O4 was synthesized by the polymerization Complex method (MPC) in order to form a material with good chemical homogeneity. Aiming to optimize the process of getting the pigment through the MPC was used a fractional factorial design 2(5-2), with resolution III. The factors studied in mathematical models were: citric acid concentration, the pyrolysis time, temperature, time and rate of calcination. The response surfaces using the software statistica 7.0. The powders were characterized by thermal analysis (TG/DSC), x-ray diffraction (XRD), scanning electron microscopy (SEM) and spectroscopy in the UV-visible. Based on the results, there was the formation of phase cobalt ferrite (CoFe2O4) with spinel structure. The color of the pigments obtained showed dark shades, from black to gray. The model chosen was appropriate since proved to be adjusted and predictive. Planning also showed that all factors were significant, with a confidence level of 95%

Biosorción en tanque agitado de Cd(+2) y Pb(+2) con cáscara de cacao

En la búsqueda de tecnologías más limpias para el tratamiento de efluentes que contienen metales pesados se ha dirigido la atención hacia la biosorción. Este estudio permitió abordar el proceso de biosorción de 〖Cd〗^(+2)y 〖Pb〗^(+2) en efluentes mineros a través de la cáscara de cacao. Se determinó las características físico-químicas del biosorbente y el resultado obtenido fue: la cáscara de cacao tiene una superficie neutra, compuesta principalmente por grupos ésteres alifáticos; además se estudió los factores que afectan este proceso como son: pH, tamaño de partícula, tiempo de contacto, Temperatura, y la concentración inicial del metal. El pH óptimo para la biosorción de plomo es entre 4 y 5 y para el cadmio fue entre 5 y 6; con respecto al tiempo de contacto necesario para eliminar la mayor cantidad de iones metálicos fue de 10 minutos, siendo el resultado obtenido en la remoción tanto de cadmio como de plomo de 86,92% y 96,74% respectivamente. Se observó que la temperatura no afecta significativamente el proceso de biosorción como el pH y se determinó como óptima 25℃ ; también se analizó que la cáscara de cacao tiene mayor afinidad por el cadmio por tener un radio iónico más pequeño que el plomo permitiéndole alcanzar poros reducidos; además al aumentar la concentración, la eliminación de cadmio disminuyó y para el plomo aumentó pero no de forma significativa. Los datos experimentales de la biosorción de plomo y cadmio en cáscara de cacao, reproducen favorablemente el modelo cinético Pseudo Segundo Orden, con coeficientes de correlación (R^2) para 〖Pb〗^(+2) de 0,999 y 〖Cd〗^(+2) de 1. Finalmente en el estudio de equilibrio el modelo de Langmuir describe el proceso de adsorción para 〖Cd〗^(+2) y el modelo de Fleundlich se ajustó mejor a los datos experimentales para 〖Pb〗^(+2).

Photonic packaging: transforming silicon photonic integrated circuits into photonic devices

Dedicated multi-project wafer (MPW) runs for photonic integrated circuits (PICs) from Si foundries mean that researchers and small-to-medium enterprises (SMEs) can now afford to design and fabricate Si photonic chips. While these bare Si-PICs are adequate for testing new device and circuit designs on a probe-station, they cannot be developed into prototype devices, or tested outside of the laboratory, without first packaging them into a durable module. Photonic packaging of PICs is significantly more challenging, and currently orders of magnitude more expensive, than electronic packaging, because it calls for robust micron-level alignment of optical components, precise real-time temperature control, and often a high degree of vertical and horizontal electrical integration. Photonic packaging is perhaps the most significant bottleneck in the development of commercially relevant integrated photonic devices. This article describes how the key optical, electrical, and thermal requirements of Si-PIC packaging can be met, and what further progress is needed before industrial scale-up can be achieved.

Kinetic modeling for the synthesis of ethyl levulinate

This work is focused on studying the kinetics of esterification of levulinic acid in an isothermal batch reactor using ethanol as a reactant and as a protic polar solvent at the same time and in the presence of an acid catalyst (sulfuric acid). The choice of solvent is important as it affects the kinetics and thermodynamics of the reaction system moreover, the knowledge of the reaction kinetics plays an important role in the design of the process. This work is divided into two stages; The first stage is the experimental part in which the experimental matrix was developed by changing the process variables one at a time (temperature, molar ratio between reactants, and catalyst concentration) in order to study their influence on the kinetics; the second stage is using the obtained data from the experiments to build the modeling part in order to estimate the thermodynamics parameters.

Recent oppositely directed trends in solar climate forcings and the global mean surface air temperature. II. Different reconstructions of the total solar irradiance variation and dependence on response time scale

We have previously placed the solar contribution to recent global warming in context using observations and without recourse to climate models. It was shown that all solar forcings of climate have declined since 1987. The present paper extends that analysis to include the effects of the various time constants with which the Earth’s climate system might react to solar forcing. The solar input waveform over the past 100 years is defined using observed and inferred galactic cosmic ray fluxes, valid for either a direct effect of cosmic rays on climate or an effect via their known correlation with total solar irradiance (TSI), or for a combination of the two. The implications, and the relative merits, of the various TSI composite data series are discussed and independent tests reveal that the PMOD composite used in our previous paper is the most realistic. Use of the ACRIM composite, which shows a rise in TSI over recent decades, is shown to be inconsistent with most published evidence for solar influences on pre-industrial climate. The conclusions of our previous paper, that solar forcing has declined over the past 20 years while surface air temperatures have continued to rise, are shown to apply for the full range of potential time constants for the climate response to the variations in the solar forcings.