Prevention of ""Risky"" drinking among students at a Brazilian University

Aim: The aim of this paper was to compare the quantity and frequency of alcohol use and its associated negative consequences between two groups of college students who were identified as being ""risky drinkers."" Subjects were randomly allocated in a clinical trial to intervention or control groups. Methods: Risky drinking use was defined as Alcohol Use Disorders Identification Test (AUDIT) >= 8 and/or Rutgers Alcohol Problem Index (RAPI) >= 5 problems in the previous year. Students who had undergone the Brief Alcohol Screening and Intervention for College Students (BASICS) (N = 145 at baseline; 142 at 12 months, and 103 at 24 months, loss of 29.7%) were compared with a control group (N = 121 at baseline; 121 at 12 months and 113 at 24 months, loss of 9.3%), the nonintervention group. Variables included drinking frequency, quantity and peak consumption, dependence assessment, and family and friends` abuse assessment. Results: Treated students at a 24-month follow-up decreased quantity of alcohol use per occasion and lowered AUDIT and RAPI scores. Conclusions: This is the first brief intervention work on risky drinking with college students in Brazil and the results are encouraging. However, it is difficult to conduct individual prevention strategies in a country where culture fosters heavy drinking through poor public policy on alcohol and lack of law enforcement.

Exercise training accelerates the removal from plasma of LDL-like nanoemulsion in moderately hypercholesterolemic subjects

Objective: Exercise training improves plasma lipid profile and diminishes risk of coronary heart disease. Previously, we showed that training increases LDL plasma clearance, as tested by an artificial LDL-like nanoemulsion method, presumably by increasing LDL receptor activity. In this study, we investigated whether training could also improve LDL clearance in hypercholesterolemic subjects (HCh) that are exposed to increased risk of cardiovascular events. Methods: Twenty sedentary HCh and 20 normolipidemic (NL) sedentary volunteers were divided into four groups: 12 HCh submitted to 4-month training program, 8 HCh with no exercise program, 12 NL submitted to 4-month training and 8 NL with no exercise program. An LDL-like nanoemulsion labeled with 14C-cholesteryl ester was injected intravenously into all subjects and plasma samples were collected during 24h after injection to determine the fractional clearance rate (FCR, in h-1) by compartmental analysis. The study was performed on the first and on the last day of the 4-month study period. Results: In both, trained HCh and NL groups, training increased nanoemulsion FCR by 36% (0.0443 +/- 0.0126; 0.0602 +/- 0.0187, p=0.0187 and 0.0503 +/- 0.0203; 0.0686 +/- 0.0216, p=0.0827, respectively). After training, LDL cholesterol diminished in both HCh and NL groups. In HCh, but not in NL group, LDL susceptibility to oxidation decreased, but oxidized LDL was unchanged. In both non-trained groups FCR was the same for the last and the 4-month previous evaluation. Conclusion: In HCh, exercise training increased the removal of LDL as tested by the nanoemulsion, and this probably accounted for decreased LDL cholesterol and diminished LDL susceptibility to oxidation. (C) 2010 Elsevier Ireland Ltd. All rights reserved.

Non-invasive detection of aortic and coronary atherosclerosis in homozygous familial hypercholesterolemia by 64 slice multi-detector row computed tomography angiography

Homozygous familial hypercholesterolemia (HoFH) is a rare disorder characterized by the early onset of atherosclerosis, often at the ostia of coronary arteries. In this study we document for the first time that aortic and coronary atherosclerosis can be detected using 64 slice multiple detector row computed tomographic coronary angiography (CTCA). We studied five HoFH patients (three females, two males, mean age 19.8 +/- 2.9 years, age range 15-23 years, with a mean low density lipoprotein (LDL) cholesterol 618 +/- 211 mg/dL) using 64 slice CTCA. None of the patients showed evidence of ischemia with standard exercise testing. Calcified and mixed atherosclerotic plaques adjacent to or compromising the coronary artery ostia were found in all study subjects. Coronary plaques causing significant obstruction were found in one patient, who had previously undergone coronary artery bypass surgery and aortic valve replacement. Two other patients were noted to have non-obstructive calcified, mixed and non-calcified coronary artery plaques. Our data suggest that CTCA could be a useful non-invasive method for detection of early aortic and coronary atherosclerosis specifically affecting the coronary ostia in HoFH subjects. (c) 2007 Elsevier Ireland Ltd. All rights reserved.

Low-fluence CO(2) laser irradiation decreases enamel solubility

This study investigated whether subablative-pulsed CO(2) laser (10.6 mu m) irradiation, using fluences lower than 1 J/cm(2), was capable of reducing enamel acid solubility. Fifty-one samples of bovine dental enamel were divided into three groups: control group, which was not irradiated (CG); group laser A (LA) irradiated with 0.3 J/cm ; and group laser B (LB) irradiated with 0.7 J/cm(2). After irradiation, the samples were subjected to demineralization in an acetate buffer solution and were then analyzed by SEM. A finite-element model was used to calculate the temperature increase. The calcium and phosphorous content in the demineralization solution were measured with an ICP-OES. ANOVA and the t-test pairwise comparison (p < 0.016) revealed that LB showed significantly lower mean Ca and P content values in the demineralization solution than other groups. A reduction in the enamel solubility can be obtained with pulsed CO(2) laser irradiation (0.7 J/cm(2), 135 mJ/pulse, 74 Hz, 100 mu s) without any surface photomodification and a less than 2 degrees C temperature increase at a 3-mm depth from the surface.

Vertical Root Fracture in Upper Premolars with Endodontic Posts: Finite Element Analysis

Upper premolars restored with endodontic posts present a high incidence of vertical root fracture (VRF). Two hypotheses were tested: (1) the smaller mesiodistal diameter favors stress concentration in the root and (2) the lack of an effective bonding between root and post increases the risk of VRF. Using finite element analysis, maximum principal stress was analyzed in 3-dimensional intact upper second premolar models. From the intact models, new models were built including endodontic posts of different elastic modulus (E = 37 or E = 200 GPa) with circular or oval cross-section, either bonded or nonbonded to circular or oval cross-section root canals. The first hypothesis was partially confirmed because the conditions involving nonbonded, low-modulus posts showed lower tensile stress for oval canals compared to circular canals. Tensile stress peaks for the nonbonded models were approximately three times higher than for the bonded or intact models, therefore confirming the second hypothesis. (J Endod 2009;35:117-120)

Finite Element Analysis of Shear Versus Torsion Adhesive Strength Tests for Dental Resin Composites

Stress distributions in torsion and wire-loop shear tests were compared using three-dimensional (3-D) linear-elastic finite element method, in an attempt to predict the ideal conditions for testing adhesive strength of dental resin composites to dentin. The torsion test presented lower variability in stress concentration at the adhesive interface with changes in the proportion adhesive thickness/resin composite diameter, as well as lower variability with changes in the resin composite elastic modulus. Moreover, the torsion test eliminated variability from changes in loading distance, and reduced the cohesive fracture tendency in the dentin. The torsion test seems to be more appropriate than wire-loop shear test for testing the resin composite-tooth interface strength. (c) Koninklijke Brill NV, Leiden, 2009

Polymerization stress of resin composites as a function of system compliance

Objectives. Evaluate the effect of testing system compliance on polymerization stress and stress distribution of composites. Methods. Composites tested were Filtek Z250 (FZ), Herculite (HL), Tetric Ceram (TC), Helio Fill-AP (HF) and Heliomolar (HM). Stress was determined in 1-mm thick specimens, inserted between two rods of either poly(methyl methacrylate), PMMA, or glass. Experimental nominal stress (sigma(exp)) was calculated by dividing the maximum force recorded 5 min after photoactivation by the cross-sectional area of the rod. Composites` elastic modulus (E) was obtained by three-point bending. Data were submitted to one-way ANOVA/Tukey`s test (alpha = 0.05). Stress distribution on longitudinal (sigma(y)) and transverse (sigma(x)) axes of models representing the composites with the highest and lowest E (FZ and HM, respectively) were evaluated by finite element analysis (FEA). Results. sigma(exp) ranged from 5.5 to 8.8 MPa in glass and from 2.6 to 3.4 MPa in PMMA. Composite ranking was not identical in both substrates, since FZ showed or sigma(exp) statistically higher than HM in glass, while in PMMA FZ showed values similar to the other composites. A strong correlation was found between stress reduction (%) from glass to PMMA and composite`s E (r(2) = 0.946). FEA revealed that system compliance was influenced by the composite (FZ led to higher compliance than HM). sigma(x) distribution was similar in both substrates, while cry distribution showed larger areas of compressive stresses in specimens built on PMMA. Significance. sigma(exp) determined in PMMA was 53-68% lower than in glass. Composite ranking varied slightly due to differences in substrates` longitudinal and transverse deformation. (c) 2007 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

The suitability of different FEA models for studying root fractures caused by wedge effect

Finite element analysis (FEA) utilizing models with different levels of complexity are found in the literature to study the tendency to vertical root fracture caused by post intrusion (""wedge effect""). The objective of this investigation was to verify if some simplifications used in bi-dimensional FEA models are acceptable regarding the analysis of stresses caused by wedge effect. Three plane strain (PS) and two axisymmtric (Axi) models were studied. One PS model represented the apical third of the root entirely, in dentin (PS-nG). The other models included gutta-percha in the apical third, and differed regarding dentin-post relationship: bonded (PS-B and Axi-B) or nonbonded (PS-nB and Axi-nB). Mesh discretization and material properties were similar for all cases. Maximum principal stress (sigma(max)) was analyzed as a response to a 165 N longitudinal load. Stress magnitude and orientation varied widely (PS-nG: 10.3 MPa; PS-B: 0.8 MPa; PS-nB: 10.4 MPa; Axi-13: 0.2 MPa, Axi-nB: 10.8 MPa). Axi-nB was the only model where all (sigma(max) vectors at the apical third were perpendicular to the model plane. Therefore, it is adequate to demonstrate the tendency to vertical root fractures caused by wedge effect. Axi-13 showed only part of the (sigma(max) perpendicular to the model plane while PS models showed sigma(max) on the model plane. In these models, sigma(max) orientation did not represent a situation where vertical root fracture would occur due to wedge effect. Adhesion between post and dentin significantly reduced (c) 2007 Wiley Periodicals, Inc.

Monostotic fibrous dysplasia: a 23-year follow-up of a patient with spontaneous bone remodeling

Fibrous dysplasia is a benign fibro-osseous disease that affects one or more bones. Although its etiology has been defined, the mechanism of spontaneous resolution is still unclear. There is strong evidence indicating the occurrence of stabilization when bone maturation is completed. Deformities that lead to esthetic and functional disorders are observed in almost all cases. Plastic surgery is often recommended when the maxilla and mandible are involved. In the case of mild deformities, careful follow-up during skeletal growth is recommended. We describe here the 23-year follow-up of a patient with monostotic fibrous dysplasia whose disease had stabilized by 13 years of follow-up. (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2009; 107: 229-234)

Sistema de planejamento e execu????o or??ament??ria: SIPLAN

Apartir de janeiro de 1998, o Instituto Nacional de Metrologia, Normaliza????o e Qualidade Industrial (Inmetro) come??ou a desenvolver e a implementar o Sistema de Planejamento e Execu????o Or??ament??ria (SIPLAN), para o qual podemos destacar alguns pontos, com origem nas seguintes necessidades: constru????o de uma proposta or??ament??ria participativa, descentralizada, integrada ao planejamento estrat??gico, que possibilitasse o gerenciamento e o cumprimento dos prazos estabelecidos para o processo de sua elabora????o; gest??o or??ament??ria descentralizada, ??gil, transparente e confi??vel, disponibilizando a todos os n??veis hier??rquicos dados atualizados diariamente, propiciando um acompanhamento efetivo da execu????o dos projetos e processos da institui????o; planejamento das ??reas de apoio, permitindo uma gest??o corporativa de suas fun????es, de forma a exercerem um papel pr??-ativo nas demandas institucionais; racionaliza????o de formul??rios e pap??is no processo de elabora????o e acompanhamento do or??amento da institui????o; e ferramenta informatizada, dispon??vel em rede, que possibilitasse a qualquer gerente, que n??o fosse afeto ao jarg??o or??ament??rio, construir proposta consistente com suas necessidades, sem se tornar especialista em or??amento

Caf?? com debate: Estado e desenvolvimento

A apresenta????o fala sobre um modelo de Estado para o desenvolvimento, pela cria????o de um estado inteligente, com estruturas e fun????es revisadas, pautado na economia do conhecimento

A recepção da obra de Paulo Coelho pela crítica literária e pelo leitor

Propõe-se um estudo acerca da recepção da obra de Paulo Coelho pela crítica literária e pelo leitor, envolvendo a indústria cultural, sob a perspectiva da Sociologia da Literatura. A pesquisa justifica-se pela grande proporção de leitores que a obra atinge: traduzida para 81 idiomas e lida em 168 países, tendo boa aceitação por diferentes perfis de leitores e por muitos críticos literários de outros países. No Brasil, a produção do escritor é recebida com uma certa reserva pela crítica literária. As intervenções da indústria cultural são discutidas por meio de um diálogo estabelecido entre Theodor W. Adorno, Max Horkheimer, Pierre Bourdieu, Umberto Eco, Luiz Costa Lima e Muniz Sodré. Em seguida, estabelece-se uma discussão sobre valor estético em relação à literatura contemporânea. Posteriormente, são mostradosos elementos temáticos recorrentes e a proximidade da narrativa coelhana com a oralidade, a partir da influência das canções compostas em parceria com Raul Seixas e da operação dos gêneros parábola e fábula.A recepção da crítica é analisada, baseando-se em estudos de Mário Maestri, Eloésio Paulo, teses e dissertações, artigos, entre outros. A recepção do leitor tem como aporte teórico Antonio Candido e Roger Chartier, dentre outros, apoiando-se na Estética da Recepção, especificamente nos estudos de Hans Robert Jauss e Regina Zilberman. É analisada a recepção da obra de Paulo Coelho pelos leitores da rede social Skoob, a fim de verificar o gênero, a idade,o nível de escolaridade, a condição socioeconômica e cultural e as impressões de leitura destes. Compreendendo esses sujeitos-leitores, historicamente, e valendo-se de outros aspectos (em vez dos estéticos) apontados pela Sociologia da Literatura, é possível estabelecer diálogos entre as preferências desses leitores com obras já legitimadas pela teoria e crítica literárias, ampliando o repertório destes e contribuindo para a mediação e a promoção da leitura, no Brasil.

Educação infantil em jornada de tempo integral : dilemas e perspectivas

Vania Carvalho de Araújo (Org.)

Análise transcriptômica da interação mamoeiro-Papaya Meleira Virus

O mamoeiro (Carica papaya L.) é uma das fruteiras mais cultivadas nas regiões tropicais e subtropicais do mundo. O Brasil faz parte do grupo dos países que mais produzem e exportam mamão no mundo. O Espírito Santo e a Bahia são responsáveis por mais de 70% da área brasileira produtora deste fruto. Porém, doenças causadas por microrganismos infecciosos afetam de modo considerável sua produção. Entre as principais doenças, destaca-se a meleira do mamoeiro, causada pelo Papaya meleira virus (PMeV), que ainda não possui uma cultivar resistente. Interessantemente os sintomas somente são desencadeados após a frutificação. Os mecanismos moleculares envolvidos no desenvolvimento dos sintomas e na resposta de defesa da planta ao PMeV ainda não foram esclarecidos. Para entender os pontos chaves desta interação, que permitam o desenvolvimento de metodologias de melhoramento genético, um estudo transcriptômico foi abordado. A tecnologia RNA-seq foi usada para o sequenciamento do transcriptoma a partir de plantas com 3, 6 e 8 meses de idade após plantio, inoculadas e não inoculadas com o PMeV. Os genes diferencialmente expressos nos 3 tempos e nas duas condições foram preditos e analisados. Estas análises revelaram um padrão de expressão geral dos genes envolvidos nesta interação. Foram encontrados 21 genes com o perfil de expressão alterado nas plantas inoculadas exclusivamente nos seis meses de idade. Destes, 8 genes envolvidos em processos de respostas de defesa e morte celular, resposta ao estresse e resposta ao estímulo biótico e abiótico foram reprimidos; enquanto os demais (13 genes), envolvidos principalmente em processos metabólicos primários, biogêneses, diferenciação e ciclo celular, comunicação e crescimento celular, bem como processos envolvidos em reprodução, e desenvolvimento da floração, foram superexpressos. Estes resultados sugerem que, aos seis meses de idade, a planta é obrigada a alterar seu programa de expressão gênica, direcionando a resposta para os processos próprios do desenvolvimento, requeridos nesse estádio fisiológico, que primam sob a resposta ao estresse, fato que finalmente leva ao desenvolvimento dos sintomas.