A review of the effect of the addition of hydrogen in the selective catalytic reduction of NOx with hydrocarbons on silver catalysts

Research is progressing fast in the field of the hydrogen assisted hydrocarbon selective catalytic reduction (HC-SCR) over Ag-based catalysts: this paper is a review of the work to date in this area. The addition of hydrogen to the HC-SCR reaction feed over Ag/Al2O3 results in a remarkable improvement in NO (x) conversion using a variety of different hydrocarbon feeds. There is some debate concerning the role that hydrogen has to play in the reaction mechanism and its effect on the form of Ag present during the reaction. Many of the studies use in situ UV-Vis spectroscopy to monitor the form of Ag in the catalyst and appear to indicate that the addition of hydrogen promotes the formation of small Ag clusters which are highly reactive for NO (x) conversion. However, some authors have expressed concern about the use of this technique for these materials and further work is required to address these issues before this technique can be used to give an accurate assessment of the state of Ag during the SCR reaction. A study using in situ EXAFS to probe the H-2 assisted octane-SCR reaction has shown that small Ag particles (containing on average 3 silver atoms) are formed during the SCR reaction but that the addition of H-2 to the feed does not result in any further change in the Ag particle size. This points to the direct involvement of H-2 in the reaction mechanism. Clearly the addition of hydrogen results in a large increase in the number and variety of adsorbed species on the surface of the catalyst during the reaction. Some authors have suggested that conversion of cyanide to isocyanate is the rate-determining step and that hydrogen promotes this conversion. Others have suggested that hydrogen reduces nitrates to more reactive nitrite species which can then activate the hydrocarbon; activation of the hydrocarbon to form acetates has been proposed as the key step. It is probable that all these promotional effects can take place and that it very much depends on the reaction temperature and feed conditions as to which one is most important.

Scale of production and choice of technique in the engineering industries in developing countries

This article examines the relationship between scale of production, optimal choice of technique and costs for three engineering industries: nuts and bolts, iron founding and machine tools. In all three industries costs of production fell as the scale of output increased. This was associated with switches of technique and the spread of fixed costs over a larger number of units. The capital-output ratio fell and labour productivity increased with increases in scale while, in most cases, the capital-labour ratio increased. The implications of these findings are briefly discussed.

Three-dimensional electron number densities in a titanium PLD plasma using interferometry

Interferometry has been used to investigate the spatio-temporal evolution of the electron number density in the initial stages of expansion following 248 nm ablation of a titanium target. Three-dimensional electron number densities are obtained from an interferogram of the plasma plume using the Abel inversion technique.

Probable z'-band Ground-based Detection of the Secondary Eclipse of WASP-19b

We present the probable ground-based detection of the secondary eclipse of the transiting exoplanet WASP-19b. The observations were made in the Sloan z'-band using the ULTRACAM triple-beam CCD camera mounted on the NTT. The measurement shows a 1±0.2mmag eclipse depth, consistent with a dayside temperature of 2900K, matching previous predictions based on H- and K-band measurements. However, since this is based on a single observation, the eclipse depth - at the moment - is not particularly well constrained, and would benefit from additional observations at similar wavelengths. Our technique for the data reduction and analysis is described, along with our approach to dealing with systematic errors associated with ground-based secondary eclipse observations.

Modified crack closure integral technique for extraction of SIFs in meshfee methods

A new approach for extracting stress intensity factors (SIFs) by the element-free Galerkin (EFG) class of methods through a modified crack closure integral (MCCI) scheme is proposed. Its primary feature is that it allows accurate calculation of mode I and mode II SIFs with a relatively simple and straightforward analysis even when a coarser nodal density is employed. The details of the adoption of the MCCI technique in the EFG method are described. Its performance is demonstrated through a number of case studies including mixed-mode and thermal problems in linear elastic fracture mechanics (LEFM). The results are compared with published theoretical solutions and those based on the displacement method, stress method, crack closure integral in conjunction with local smoothing (CCI–LS) technique, as well as the M-integral method. Its advantages are discussed.

Discovering subgroups of patients from DNA copy number data using NMF on compacted matrices

In the study of complex genetic diseases, the identification of subgroups of patients sharing similar genetic characteristics represents a challenging task, for example, to improve treatment decision. One type of genetic lesion, frequently investigated in such disorders, is the change of the DNA copy number (CN) at specific genomic traits. Non-negative Matrix Factorization (NMF) is a standard technique to reduce the dimensionality of a data set and to cluster data samples, while keeping its most relevant information in meaningful components. Thus, it can be used to discover subgroups of patients from CN profiles. It is however computationally impractical for very high dimensional data, such as CN microarray data. Deciding the most suitable number of subgroups is also a challenging problem. The aim of this work is to derive a procedure to compact high dimensional data, in order to improve NMF applicability without compromising the quality of the clustering. This is particularly important for analyzing high-resolution microarray data. Many commonly used quality measures, as well as our own measures, are employed to decide the number of subgroups and to assess the quality of the results. Our measures are based on the idea of identifying robust subgroups, inspired by biologically/clinically relevance instead of simply aiming at well-separated clusters. We evaluate our procedure using four real independent data sets. In these data sets, our method was able to find accurate subgroups with individual molecular and clinical features and outperformed the standard NMF in terms of accuracy in the factorization fitness function. Hence, it can be useful for the discovery of subgroups of patients with similar CN profiles in the study of heterogeneous diseases.

A laser driven pulsed X-ray backscatter technique for enhanced penetrative imaging

X-ray backscatter imaging can be used for a wide range of imaging applications, in particular for industrial inspection and portal security. Currently, the application of this imaging technique to the detection of landmines is limited due to the surrounding sand or soil strongly attenuating the 10s to 100s of keV X-rays required for backscatter imaging. Here, we introduce a new approach involving a 140 MeV short-pulse (< 100 fs) electron beam generated by laser wakefield acceleration to probe the sample, which produces Bremsstrahlung X-rays within the sample enabling greater depths to be imaged. A variety of detector and scintillator configurations are examined, with the best time response seen from an absorptive coated BaF₂ scintillator with a bandpass filter to remove the slow scintillation emission components. An X-ray backscatter image of an array of different density and atomic number items is demonstrated. The use of a compact laser wakefield accelerator to generate the electron source, combined with the rapid development of more compact, efficient and higher repetition rate high power laser systems will make this system feasible for applications in the field.

Diagnostic de l'accessibilité aux soins de santé en Haïti

L’accessibilité aux soins de santé est une priorité de nombreux gouvernements à travers le monde. En Haïti, les gouvernements se sont succédés et ont tenté à travers les années des interventions dont les résultats ne sont souvent pas satisfaisants. Le programme d’assistance médicale cubain, actuellement appliqué dans le pays, est en œuvre dans plus d’une vingtaine de pays en développement, mais il existe très peu d’évaluations indépendantes qui permettent de l’appréhender. Cet ouvrage se donne pour objectif de vérifier le bien fondé de cette intervention en tenant compte du contexte, d’établir la plausibilité en fonction des moyens du pays et finalement, de proposer des solutions qui améliorent la situation. Pour répondre à ces objectifs, l’étude de cas a été adoptée comme stratégie de recherche. Cette technique permet de mieux analyser le contexte, et de comprendre ses effets sur le programme. Des entrevues semi-structurées ont été réalisées pour permettre de faire les analyses stratégique et logique nécessaires pour atteindre les objectifs sus-cités. Les entrevues ont visé successivement la compréhension du modèle théorique, la détermination des problèmes pertinents auxquels fait le système de santé, les causes de la difficulté de rétention des professionnels et finale l’analyse du modèle. L’évaluation a révélé que l’accessibilité aux soins de santé est complexe et qu’un grand nombre de facteurs l’influencent. En Haïti, ces facteurs ne sont pas différents de ceux recensés dans la littérature. Mais la composante géographique associée à l’aspect administratif du système de santé en général constituent les éléments qui auraient l’impact le plus important sur l’accessibilité du système de santé. Vu les conditions actuelles, la modernisation de la gestion représente l’avenue à privilégier en attendant que les moyens permettent d’agir sur les autres facteurs. La rétention des professionnels de santé est un facteur essentiel de l’accessibilité aux soins de santé. Pour être efficace, les mécanismes de rétention utilisés doivent s’accompagner de mesures comme l’amélioration des conditions de travail, ainsi qu’un salaire compétitif. Les conditions de vie dans le milieu rural haïtien ne peuvent en rien être comparées à celles des pays développés. On ne peut espérer les mêmes résultats avec les programmes de rétention utilisés par cette intervention. Tenant compte du contexte socioéconomique et du tableau épidémiologique haïtien, il serait peut-être plus efficient de créer de nouveaux corps de métier. Ces derniers devraient être en mesure de régler les problèmes de santé simples, et occasionneraient des coûts moins importants. Ce serait à court terme et même à moyen terme une solution viable dans le contexte actuel. Le programme actuel s’il semble respecter les données probantes en matière d’accessibilité aux soins, néglige d’incorporer les paramètres spécifiques au milieu haïtien, nécessaires à l’atteinte de ses objectifs. La politisation excessive est aussi un facteur qui à terme pourrait conduire à l’échec de ce programme. Si à court terme le programme parvient à augmenter le nombre de professionnels de santé dans le pays, il est peu probable que cela dure. Les moyens précaires du pays ne lui permettent pas de se payer des professionnels hautement qualifiés dans les milieux sous desservis. L’intervention pour réussir doit intégrer les caractéristiques particulières du milieu et mettre plus d’accent sur la gestion du système.

Caractérisation des nanoparticules polymériques par la technique d'ultracentrifugation analytique

L’utilisation de nanoparticules (NPs) dans divers domaines industriels est de plus en plus fréquente ce qui génère leur propagation dans l’environnement. Selon leur persistance, mobilité, bioaccumulation et toxicité, des risques inconnus pour la santé et pour des écosystèmes peuvent en résulter. En effet, la caractérisation et la quantification sont des défis analytiques très complexes en raison de la nature dynamique (petite taille, grande réactivité et instabilité) des nanomatériaux. L'objectif de cette étude est donc de caractériser par ultracentrifugation analytique (AUC) des nanoparticules polymériques (Allosperse® dites allosphères) qui sont destinées à des fins agricoles. Pour y parvenir, différentes NPs métalliques (argent, quantum dot), oxydes métalliques (dioxyde de titane, oxyde de zinc) et NPs de polystyrène ont d’abord été mesurés par AUC à l’aide des différents systèmes de détection (absorbance, fluorescence et interférence). Dans le cas des allosphères, un grand nombre d'essais préliminaires ont été réalisés afin d'optimiser la vitesse d'ultracentrifugation, le temps d'ultracentrifugation, le nombre de numérisations et la concentration de l'échantillon. Un protocole optimisé a été utilisé pour la détermination du diamètre hydrodynamique (dh) des NPs. Les différentes analyses qui ont été réalisées dans cette étude révèlent que l’AUC permet de déterminer la taille de très petites NPs. Par ailleurs, une étude du comportement de ces allosphères pour des pH entre 4-8, des forces ioniques de 0 à 500 mM, en présence ou absence de matière organique naturelle a été entreprise. Les travaux ont montré que le dH était d’environ 7,0 nm avec de petites augmentations à faible pH, ou à très grande force ionique ou dureté. Ces résultats indiquent la grande stabilité physique et chimique des allosphères qui auront, ainsi, une grande mobilité dans les sols. La diffusion de lumière dynamique et la spectroscopie de corrélation de fluorescence ont été utilisées afin de valider les résultats obtenus par l’AUC.

Characterization of Selected Photonic Materials and Systems Using Photoacoustic Technique

The photoacoustic investigations carried out on different photonic materials are presented in this thesis. Photonic materials selected for the investigation are tape cast ceramics, muItilayer dielectric coatings, organic dye doped PVA films and PMMA matrix doped with dye mixtures. The studies are performed by the measurement of photoacoustic signal generated as a result of modulated cw laser irradiation of samples. The gas-microphone scheme is employed for the detection of photoacoustic signal. The different measurements reported here reveal the adaptability and utility of the PA technique for the characterization of photonic materials.Ceramics find applications in the field of microelectronics industry. Tape cast ceramics are the building blocks of many electronic components and certain ceramic tapes are used as thermal barriers. The thermal parameters of these tapes will not be the same as that of thin films of the same materials. Parameters are influenced by the presence of foreign bodies in the matrix and the sample preparation technique. Measurements are done on ceramic tapes of Zirconia, Zirconia-Alumina combination, barium titanate, barium tin titanate, silicon carbide, lead zirconate titanateil'Z'T) and lead magnesium niobate titanate(PMNPT). Various configurations viz. heat reflection geometry and heat transmission geometry of the photoacoustic technique have been used for the evaluation of different thermal parameters of the sample. Heat reflection geometry of the PA cell has been used for the evaluation of thermal effusivity and heat transmission geometry has been made use of in the evaluation of thermal diffusivity. From the thermal diffusivity and thermal effusivity values, thermal conductivity is also calculated. The calculated values are nearly the same as the values reported for pure materials. This shows the feasibility of photoacoustic technique for the thermal characterization of ceramic tapes.Organic dyes find applications as holographic recording medium and as active media for laser operations. Knowledge of the photochemical stability of the material is essential if it has to be used tor any of these applications. Mixing one dye with another can change the properties of the resulting system. Through careful mixing of the dyes in appropriate proportions and incorporating them in polymer matrices, media of required stability can be prepared. Investigations are carried out on Rhodamine 6GRhodamine B mixture doped PMMA samples. Addition of RhB in small amounts is found to stabilize Rh6G against photodegradation and addition of Rh6G into RhB increases the photosensitivity of the latter. The PA technique has been successfully employed for the monitoring of dye mixture doped PMMA sample. The same technique has been used for the monitoring of photodegradation ofa laser dye, cresyl violet doped polyvinyl alcohol also.Another important application of photoacoustic technique is in nondestructive evaluation of layered samples. Depth profiling capability of PA technique has been used for the non-destructive testing of multilayer dielectric films, which are highly reflecting in the wavelength range selected for investigations. Eventhough calculation of thickness of the film is not possible, number of layers present in the system can be found out using PA technique. The phase plot has clear step like discontinuities, the number of which coincides with the number of layers present in the multilayer stack. This shows the sensitivity of PA signal phase to boundaries in a layered structure. This aspect of PA signal can be utilized in non-destructive depth profiling of reflecting samples and for the identification of defects in layered structures.

Electron Density Determination of Laser Induced Plasma from Polymethyl Methacrylate Using Phaseshift Detection Technique

Irradiation of a Polymethyl methacrylate target using a pulsed Nd-YAG laser causes plasma formation in the vicinity of the target. The refractive index gradient due to the presence of the plasma is probed using phase-shift detection technique. The phase-shift technique is a simple but sensitive technique for the determination of laser ablation threshold of solids. The number density of laser generated plasma above the ablation threshold from Polymethyl methacrylate is calculated as a function of laser fluence. The number density varies from 2×1016 cm-3 to 2×1017 cm-3 in the fluence interval 2.8-13 J · cm-2.

Realization of a Scanning Photoacoustic Technique: Thermal properties of Bulk and Film Samples

Among the large number of photothcrmal techniques available, photoacoustics assumes a very significant place because of its essential simplicity and the variety of applications it finds in science and technology. The photoacoustic (PA) effect is the generation of an acoustic signal when a sample, kept inside an enclosed volume, is irradiated by an intensity modulated beam of radiation. The radiation absorbed by the sample is converted into thermal waves by nonradiative de-excitation processes. The propagating thermal waves cause a corresponding expansion and contraction of the gas medium surrounding the sample, which in tum can be detected as sound waves by a sensitive microphone. These sound waves have the same frequency as the initial modulation frequency of light. Lock-in detection method enables one to have a sufficiently high signal to noise ratio for the detected signal. The PA signal amplitude depends on the optical absorption coefficient of the sample and its thermal properties. The PA signal phase is a function of the thermal diffusivity of the sample.Measurement of the PA amplitude and phase enables one to get valuable information about the thermal and optical properties of the sample. Since the PA signal depends on the optical and thennal properties of the sample, their variation will get reflected in the PA signal. Therefore, if the PA signal is collected from various points on a sample surface it will give a profile of the variations in the optical/thennal properties across the sample surface. Since the optical and thermal properties are affected by the presence of defects, interfaces, change of material etc. these will get reflected in the PA signal. By varying the modulation frequency, we can get information about the subsurface features also. This is the basic principle of PA imaging or PA depth profiling. It is a quickly expanding field with potential applications in thin film technology, chemical engineering, biology, medical diagnosis etc. Since it is a non-destructive method, PA imaging has added advantages over some of the other imaging techniques. A major part of the work presented in this thesis is concemed with the development of a PA imaging setup that can be used to detect the presence of surface and subsmface defects in solid samples.Determination of thermal transport properties such as thermal diffusivity, effusivity, conductivity and heat capacity of materials is another application of photothennal effect. There are various methods, depending on the nature of the sample, to determine these properties. However, there are only a few methods developed to determine all these properties simultaneously. Even though a few techniques to determine the above thermal properties individually for a coating can be found in literature, no technique is available for the simultaneous measurement of these parameters for a coating. We have developed a scanning photoacoustic technique that can be used to determine all the above thermal transport properties simultaneously in the case of opaque coatings such as paints. Another work that we have presented in this thesis is the determination of thermal effusivity of many bulk solids by a scanning photoacoustic technique. This is one of the very few methods developed to determine thermal effiisivity directly.

A Novel Cache Resolution Technique For Cooperative Caching In Wireless Mobile Networks

Cooperative caching is used in mobile ad hoc networks to reduce the latency perceived by the mobile clients while retrieving data and to reduce the traffic load in the network. Caching also increases the availability of data due to server disconnections. The implementation of a cooperative caching technique essentially involves four major design considerations (i) cache placement and resolution, which decides where to place and how to locate the cached data (ii) Cache admission control which decides the data to be cached (iii) Cache replacement which makes the replacement decision when the cache is full and (iv) consistency maintenance, i.e. maintaining consistency between the data in server and cache. In this paper we propose an effective cache resolution technique, which reduces the number of messages flooded in to the network to find the requested data. The experimental results gives a promising result based on the metrics of studies.

Alignment Model and Training Technique in SMT from English to Malayalam

This paper investigates certain methods of training adopted in the Statistical Machine Translator (SMT) from English to Malayalam. In English Malayalam SMT, the word to word translation is determined by training the parallel corpus. Our primary goal is to improve the alignment model by reducing the number of possible alignments of all sentence pairs present in the bilingual corpus. Incorporating morphological information into the parallel corpus with the help of the parts of speech tagger has brought around better training results with improved accuracy

Study on Granular Dynamics in Vertically Vibrated Beds using Tracking Technique

The study of granular material is of great interest to many researchers in both engineering and science communities. The importance of such a study derives from its complex rheological character and also its significant role in a wide range of industrial applications, such as coal, food, plastics, pharmaceutical, powder metallurgy and mineral processing. A number of recent reports have been focused on the physics of non-cohesive granular material submitted to vertical vibration in either experimental or theoretical approaches. Such a kind of system can be used to separate, mix and dry granular materials in industries. It exhibits different instability behaviour on its surface when under vertical vibration, for example, avalanching, surface fluidization and surface wave, and these phenomena have attracted particular interest of many researchers. However, its fundamental understanding of the instability mechanism is not yet well-understood. This paper is therefore to study the dynamics of granular motion in such a kind of system using Positron Emission Particle Tracking (PEPT), which allows the motion of a single tracer particle to be followed in a non-invasive way. Features of the solids motion such as cycle frequency and dispersion index were investigated via means of authors’ specially-written programmes. Regardless of the surface behaviour, particles are found to travel in rotational movement in horizontal plane. Particle cycle frequency is found to increase strongly with increasing vibration amplitude. Particle dispersion also increased strongly with vibration amplitude. Horizontal dispersion is observed to always exceed vertical dispersion.