997 resultados para Precipitação homogênea


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The time series analysis has played an increasingly important role in weather and climate studies. The success of these studies depends crucially on the knowledge of the quality of climate data such as, for instance, air temperature and rainfall data. For this reason, one of the main challenges for the researchers in this field is to obtain homogeneous series. A time series of climate data is considered homogeneous when the values of the observed data can change only due to climatic factors, i.e., without any interference from external non-climatic factors. Such non-climatic factors may produce undesirable effects in the time series, as unrealistic homogeneity breaks, trends and jumps. In the present work it was investigated climatic time series for the city of Natal, RN, namely air temperature and rainfall time series, for the period spanning from 1961 to 2012. The main purpose was to carry out an analysis in order to check the occurrence of homogeneity breaks or trends in the series under investigation. To this purpose, it was applied some basic statistical procedures, such as normality and independence tests. The occurrence of trends was investigated by linear regression analysis, as well as by the Spearman and Mann-Kendall tests. The homogeneity was investigated by the SNHT, as well as by the Easterling-Peterson and Mann-Whitney-Pettit tests. Analyzes with respect to normality showed divergence in their results. The von Neumann ratio test showed that in the case of the air temperature series the data are not independent and identically distributed (iid), whereas for the rainfall series the data are iid. According to the applied testings, both series display trends. The mean air temperature series displays an increasing trend, whereas the rainfall series shows an decreasing trend. Finally, the homogeneity tests revealed that all series under investigations present inhomogeneities, although they breaks depend on the applied test. In summary, the results showed that the chosen techniques may be applied in order to verify how well the studied time series are characterized. Therefore, these results should be used as a guide for further investigations about the statistical climatology of Natal or even of any other place.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

An amperometric FIA method for nitrite quantification based on nitrite electroreduction and employing a carbon paste electrode (CPE) chemically modified with iron hexacyanoferrate (HCF) as an amperometric detector was developed. The influence of experimental conditions on the preparation of the electrode materials was evaluated and the materials obtained in each study were used for the development of modified electrodes. The electrochemical sensors were prepared by a fast, simple, and inexpensive procedure, and the long-term performance of the electrodes were quite satisfactory as the stability was maintained over one year. HCF was an effective redox mediator for nitrite electroreduction in acidic media, allowing nitrite detection at +0.2 V vs. Ag/AgClsat, which is a potential free of possible interfering species that are normally present in food and water samples. The electrochemical cell used in the FIA system was similar to a batch injection analysis cell, enabling recirculation of the carrier solution. This is an attractive feature because it allows the use of a high flow rate (6 mL min-1) leading to high sensitivity and analysis speed, while keeping reagent consumption low. The proposed method had a detection limit of 9 μmol L-1 and was successfully employed for nitrite quantification in spiked water and sausage samples. The obtained results were in good agreement with those provided by the spectrophotometric official method. At a 95 % confidence level it was not observed statistical differences neither in nitrite content nor in the precision provided by both methods. The experimental conditions for the synthesis of HCF were optimized and the best electrode material was prepared by mixing FeCl3, K4[Fe(CN)6] and carbon powder subjected to an acid and thermal treatment (400 ºC), followed by ultrasonic agitation at 4 °C. This material was used to construct an electrode with improved analytical performance to reduce nitrite, which presented greater stability compared to HCF film electrodeposited on the EPC, showing that the preparation procedure of the electrode material is an effective strategy for the development of HCF modified electrodes.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O estudo apresentado teve como objetivos planificar e implementar e analisar uma proposta didática alternativa para a abordagem dos níveis macroscópico, simbólico e sub-microscópico, indispensáveis para a compreensão das reações químicas, salientando-se o facto de não se explorar, nos manuais e na prática, todo o potencial de uma reação química muito usual. A proposta utiliza uma diferente abordagem da tradicional reação de precipitação do iodeto de chumbo, centrada em questões-problema: “Ocorreu uma reação química?” e “Será possível dissolver o precipitado?”. A metodologia foi qualitativa e centrou-se na investigação-ação colaborativa. Perante as questões problema, os alunos fizeram previsões, sugeriram e realizaram procedimentos experimentais de carácter investigativo para as testar e fundamentaram as respostas através da comunicação oral e da elaboração de esquemas pictóricos (livremente), estes últimos, para ilustrar o nível sub-microscópico. Analisaram-se conjuntamente os esquemas e os dados da observação direta. Os resultados evidenciam que os alunos: identificam a ocorrência da reação química sensorialmente (visualização do aparecimento de uma substância colorida após a junção de duas soluções incolores - nível macroscópico), representam a reação química utilizando a simbologia química (nível simbólico) mas apresentam algumas dificuldades na interpretação sub-microscópica.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This research is about the use of the coconut´s endocarp (nucifera linn) and the waste of derivatives of wood and furniture as raw material to technological use. In that sense, the lignocellulosic waste is used for manufacture of homogeneous wood sheet agglomerate (LHWS) and lignocellulosic load which take part of a polymeric composite with fiber glass E (GFRP-WC). In the manufacturing of the homogeneous wood sheet agglomerate (LHWS), it was used mamona´s resin as waste s agglutinating element. The plates were taken up in a hydraulic press engine, heated, with temperature control, where they were manufactured for different percentage of waste wood and coconuts nucífera linn. Physical tests were conducted to determine the absorption of water, density, damp grade (in two hours and twenty-four hours), swelling thickness (in two hours and twenty-four hours), and mechanical tests to evaluate the parallel tensile strength (internal stick) and bending and the static (steady) flexural. The physical test´s results indicate that the LHWS can be classified as bonded wood plate of high-density and with highly water resistant. In the mechanical tests it was possible to establish that LHWS presents different characteristics when submitted to uniaxial tensile and to the static (steady) flexural, since brittle and elasticity module had a variation according to the amount of dry endocarp used to manufacture each trace of LHWS. The GFRP-WC was industrially manufactured by a hand-lay-up process where the fiber glass E was used as reinforcement the lignocellulósic´s waste as load. The matrix was made with ortofitalic unsaturated polyester resin. Physical and mechanical tests were performed in presence of saturated humidity and dry. The results indicated good performance of the GFRP-WC, as traction as in flexion in three points. The presence of water influenced the modules obtained in the flexural and tensile but there were no significant alteration in the properties analyzed. As for the fracture, the analysis showed that the effects are more harmful in the presence of damp, under the action of loading tested, but despite this, the fracture was well defined starting in the external parts and spreading to the internal regions when one when it reaches the hybrid load

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Comumente dados de precipitação pluvial apresentam variação e a obtenção da estimativa de sua distribuição espacial é primordial no planejamento agrícola e ambiental. O objetivo neste trabalho foi comparar o método de estimação dos mínimos quadrados ponderados para ajuste de modelos ao semivariograma com o método de tentativa e erro, através da técnica de auto-validação "jack-knifing", para dados de precipitação pluvial média anual do Estado de São Paulo. Observações de precipitação correspondentes ao período de 1957 a 1997 foram usadas para trezentos e setenta e nove (379) estações pluviométricas abrangendo todo o Estado de São Paulo, representando uma área de aproximadamente 248.808,8 km². A periodicidade exibida pelos semivariogramas foi ajustada pelo modelo "hole effect", em que os parâmetros foram estimados com maior precisão pelo método de mínimos quadrados ponderados quando comparado com o método de tentativa e erro. O método de auto-validação "jack-knifing" mostrou-se adequado para a definição de métodos e modelos a serem usados para semivariâncias, cujo procedimento permitiu definir dezesseis vizinhos como o número ideal para a estimativa por krigagem de valores de precipitação pluvial para locais não amostrados no Estado de São Paulo.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Esta pesquisa insere-se dentro do campo de estudo da ciência geográfica denominada Geografia da Saúde, ramo este que tem contribuído para as discussões no âmbito da Geografia. Deste modo, este estudo busca no arcabouço teórico da Geografia da Saúde sua fundamentação para relacionar a precipitação com os casos de dengue no município de Eusébio, que se localiza na Região Metropolitana de Fortaleza-CE/Brasil. A referida cidade é considerada de pequeno porte, com uma população 46.047 habitantes (IBGE, 2010). Contudo, têm crescido em ritmo acelerado e, desta forma, é necessário cuidado com os problemas socioambientais, uma vez que são nas cidades que estes riscos são mais observados. É nesta perspectiva que relaciona-se os casos de dengue no município do Eusébio com a precipitação nos últimos anos, haja vista que o município é um modelo para o Estado do Ceará de controle e combate a dengue. Esta cidade está inserida dentro de uma política cearense de combate a proliferação do Aedes Aegypti - Programa Nacional de Controle da Dengue (PNCD). Neste contexto, verifica-se a relação dos fatores climáticos - precipitação com o acréscimo dos casos de dengue no município. Entretanto, não dissociou-se os aspectos físicos que propiciam a proliferação do mosquito, da questão social, assim, averigua-se também a intervenção das políticas públicas para o controle dos casos de dengue no município.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In Brazil the adoption of several models of cattle confinement leads to special conditions for management methods in dairy production, which can be improved by the use of technology that assures better herd management. Indexes relating environmental variables to production are applied for the prediction of milk production. The values of temperature and relative humidity, rain index, solar radiation and pasture soil temperature are generally considered potential stress agents for cows. The objective of this research was to develop an index for predicting milk production for high productivity Jersey milking cows lodged in semi confinement in tropical conditions. The experiment considered two treatments: A - the cows waited for 30 minutes prior to milking in a room with a shower associated to a fan; B - the cows did not have access to this room (control). Other than the waiting period, the cows had access to pasture. Differences in the effect of average production were not statistically significant. The analysis for studying the effect of the variables and designing the model led to a statistical model relating the variables milk production and rain index, as well as the maximum soil temperature of pasture, and milk production.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Is the carrasco on the Ibiapaba plateau a unique plant formation? To answer this question the vertical height (except of climbers) and the stem basal diameter (from 3cm on) of woody plants were measured, and soil extracts (0-50 and 50-100cm depth) were taken from 100 random plots (10x10m) at Jaburuna (3º54'34S and 40º59'24W, altitudes near 830m), municipality of Ubajara, Ceará State. Data on climate, soil, diameter height, density, basal area, and physiognomy were compared with those surveyed by other researchers from the carrasco, caatinga, and cerrado in Northeastern Brazil. The carrasco occurs under an annual rainfall of between 668 and 1,289mm and temperatures from 22 to 24ºC, on alic Quartz Sand soils, at altitudes between 700 and 900m: it has a larger density and a smaller basal area than the caatinga and the cerrado, small and similar diameters, and an average vertical height between 3,7 and 5,4m. It differs from the caatinga, cerrado (and cerradão) and secondary forest in many items of lhe ecotope, organization and physiognomy, thus being a unique plain formation, which can be characterized as a deciduous, high, closed, and unistratified shrubland intermingled by lianas, with an irregular canopy and sparse, emergent trees.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

We estimate litter production and leaf decomposition rate in a cerradão area, physiognomy little studied and very threatened in São Paulo State. During the period of study, litter production was 5646.9 kg.ha-1.year-1, which the 'leaf' fraction corresponded to 4081.2 kg.ha¹.year¹; the 'branch' fraction, to 1066.1 kg.ha-1.year-1; the 'reproductive structures' fraction, to 434.1 kg.ha-1.year-1; and the 'miscellaneous' fraction to 65.5 kg.ha-1.year-1. Litter production was highly seasonal and negatively correlated with relative humidity and air temperature. Leaf production was negatively correlated with relative humidity, rainfall, and air temperature. There was no significant difference between litter production found in this study and those in two other sites with cerradão and semideciduous forest, but these physiognomies differed significantly from the cerrado sensu stricto. Leaf decomposition rate (K) was 0.56. Half-life of the decomposing material was 1.8 years and turnover time was 2.3 years.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Universidade Estadual de Campinas . Faculdade de Educação Física

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Universidade Estadual de Campinas . Faculdade de Educação Física

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A saúde bucal na maioria dos municípios brasileiros constitui ainda um grande desafio aos princípios doutrinários do SUS. Este estudo objetivou analisar a prevalência de cárie dentária (CPOD) e as diferenças quanto ao gênero e localização geográfica, Significant Caries Index (SiC) e a porcentagem de livres de cárie no município de Itaí, São Paulo, em 2006. Utilizou-se a metodologia da OMS (1997), em uma população constituída por 390; destes, 178 adolescentes aos 12 anos de idade e que correspondem a 46% dos adolescentes matriculados nas escolas do município. O exame foi realizado por um único examinador. O teste kappa foi calculado com valor de concordância de 0,95. O índice CPOD foi de 2, 45, o SiC de 5, 08, e 30% dos indivíduos se apresentaram livres de cárie. Observou-se que 34% dos adolescentes concentraram 70% da doença demonstrando a ocorrência da polarização da cárie dentária. Foram encontradas diferenças estatisticamente significantes na comparação do CPOD entre a localização geográfica e o mesmo não aconteceu com o gênero. Concluiu-se que está ocorrendo a polarização da cárie dentária em adolescentes, aos 12 anos, mas esta ocorrência não se apresenta de forma homogênea. Os problemas se intensificam em uma pequena parcela da população.