Galloylated proanthocyanidins from shea (Vitellaria paradoxa) meal have potent anthelmintic activity against Ascaris suum

Proanthocyanidins (PA) from shea (Vitellaria paradoxa) meal were investigated by thiolytic degradation with benzyl mercaptan and the reaction products were analysed by high performance liquid chromatography–mass spectrometry. These PA were galloylated (≈40%), contained only B-type linkages and had a high proportion of prodelphinidins (>70%). The mean degree of polymerisation was 8 (i.e. average molecular size was 2384 Da) and epigallocatechin gallate (EGCg) was the major flavan-3-ol subunit in PA. Shea meal also proved to be a potentially valuable source for extracting free flavan-3-ol-O-gallates, especially EGCg (575 mg/kg meal), which is known for its health and anti-parasitic benefits. Proanthocyanidins were isolated and tested for bioactivity against Ascaris suum, which is an important parasite of pigs. Migration and motility tests revealed that these PA have potent activity against this parasitic nematode.

Condensed tannins in extracts from European medicinal plants and herbal products

Medicinal plant materials are not usually analysed for condensed tannins (CT). Thirty commercially available European medicinal plants and herbal products were screened for CT and fourteen CT samples were analysed in detail. This is also the first comprehensive CT analysis of pine buds, walnut leaves, heather flowers and great water dock roots. Acetone/water extracts contained between 3.2 and 25.9 g CT/100 g of extract, had CT with mean degrees of polymerisation of 2.9 to 13.3, procyanidin/prodelphinidin ratios of 1.6/98.4 to 100/0 and cis/trans flavan-3-ol ratios of 17.7/82.3 to 97.3/2.7. The majority of samples contained procyanidins, four contained A-type linkages (blackthorn flowers, heather flowers, bilberry leaves and cowberry leaves) and one sample also had galloylated procyanidins (great water dock roots).

Proanthocyanidins from Averrhoa bilimbi fruits and leaves

Proanthocyanidins from Averrhoa bilimbi fruits and leaves were analysed by thiolysis with benzyl mercaptan and high performance liquid chromatography–mass spectrometry and consisted of pure B-type procyanidins. These tannins consisted of almost pure homopolymers, with epicatechin accounting for most of the monomeric subunits in fruits (97%) and leaves (99%). Leaves contained more procyanidins (4.5 vs 2.2 g/100 g dry weight) with a higher mean degree of polymerisation (9 vs 6) than fruits. This study thus contributes information on the proanthocyanidins of a traditional food that can make an important contribution to the intake of compounds with antioxidant and health benefits. The fruits are prized for culinary purposes and the leaves are used in traditional medicine.

Exploiting thermally-reversible chemistry for controlling the crosslinking of polymer networks

High explosives are highly sensitive to accidental detonation by impact, fire, shrapnel and small arms fire. This sensitivity can be reduced by storing the energetic material within a rubbery polymer matrix and are known as plastic bonded explosives (PBX). The current procedure used to manufacture PBX involves mixing the energetic material with a hydroxy-functionalised aliphatic polymer. Upon the addition of an isocyanate crosslinker an immediate polymerisation occurs and thus the rapidly curing mixture must be used to fill the missile or shells, referred to as ‘stores’. This process can lead to poor distribution of the crosslinker resulting in the formation of an inhomogeneously crosslinked matrix and the formation of voids. One solution to this problem involves containing the crosslinker within polyurethane microcapsules that are uniformly dispersed in the explosive-polymer mixture. Upon the application of a stimulus the crosslinker can be released from the microcapsules and the formation of a uniformly crosslinked PBX achieved. Herein is reported the design and synthesis of polyurethane microcapsules that release isocyanate crosslinkers when desired using a thermal stimulus. This has been achieved by exploiting the thermally-reversible nature of oxime-urethane and Diels-Alder adducts that have been incorporated into the shell wall of the microcapsules. An alternative approach to controlling the polymerisation of PBX materials has also been achieved using thermally-reversible blocked isocyanates that regenerate the isocyanate crosslinker when exposed to heat.

Surface esterification of cellulose fibres: Processing and characterisation of low-density polyethylene/cellulose fibres composites

Low-density polyethylene was filled with cellulose fibres from sugar cane bagasse obtained from organosolv/supercritical carbon dioxide pulping process. The fibres were also used after chemical modification with octadecanoyl and dodecanoyl chloride acids. The morphology, thermal properties, mechanical properties in both the linear and nonlinear range, and the water absorption behaviour of ensuing composites were tested. The evidence of occurrence of the chemical modification was checked by X-ray photoelectron spectrometry. The degree of polymerisation of the fibres and their intrinsic properties (zero tensile strength) were determined. It clearly appeared that the surface chemical modification of cellulose fibres resulted in improved interfacial adhesion with the matrix and higher dispersion level. However, composites did not show improved mechanical performances when compared to unmodified fibres. This surprising result was ascribed to the strong lowering of the degree of polymerisation of cellulose fibres (as confirmed by the drastic decrease of their zero tensile strength) after chemical treatment despite the mild conditions used. (c) 2007 Elsevier Ltd. All rights reserved.

Studie av faktorer som påverkar färgtorkningen vid tryckning i arkoffset

Vanliga arkoffsetfärger innehåller pigment, trioglycerid, mineraloljor eller vegetabiliska oljor, naturliga hartser, alkyder och tillsatser såsom torkmedel, antioxidanter och vaxer.Tryckfärger för olika ändamål torkar genom skilda processer. Arkoffsetfärger torkar i två steg. Först sker oljeabsorption och sedan sker en kombination av oxidation och polymerisation. I detta steg är det bindemedlet och oljorna som förlorar dubbelbindningar, kortare molekyler reagerar och bildar längre molekylkedjor, vilket resulterar i att färgen torkar. Den kemiska torkningen initieras av luftens syre. Tryckfärgers torkningsförlopp tar alltför lång tid och detta arbete avsåg att genom GRT-utvärdering utvärdera hur temperatur, tillgång av syre och fuktvattenhållningen i tryckpressen påverkar torktiden för tre olika papperskvaliteter.Examensarbetet visade att temperaturen påverkar torktiden mycket. En ökning från 23 ºC till 40 ºC minskade torktiden med upp till en tredjedel. För att syret ska reducera torktiden måste tillgången vara stor. Endast ökning av sprutpulvrets grovlek gav inget utslag, men torkning vid fritt lufttillträde minskade torktiden till en sjättedel jämfört med torkning i stapel. För att torkningen inte ska ta onödigt lång tid ska fuktvattennivån i pressen vara låg.

Effect of synthesis parameters on the electrical conductivity of polypyrrole-coated poly(ethylene terephthalate) fabrics

The effects of pyrrole, anthraquinone-2-sulphonic acid (AQSA) and iron(III) chloride (FeCl3) concentrations, reaction time and temperature on the electrical conductivity of polypyrrole (PPy) - coated poly(ethylene terephthalate) (PET) fabrics were investigated. With an increase in both the AQSA and FeCl3 concentrations, resistivity decreased to a point beyond which higher concentrations led to increased surface resistivity. Erosion of the polymer coating, in dynamic synthesis from continual abrasion, manifested as an exponential increase in the resistance of the coated textile substrate. This was not encountered in static synthesis conditions. Temperature affected the degree of surface and bulk polymerisation. The effect of polymerisation temperature on conductivity was negligible. Conductive polymer coating on textiles through chemical polymerisation enabled a smooth coherent film to encase individual fibres, which did not affect the tactile properties of the host substrate. The optimum FeCl3/pyrrole and AQSA FeCl3/pyrrole molar ratios were found to be 2.22 and 0.40 respectively.

Soluble poly-3-alkylpyrrole polymers on films and fabrics

Conductive textiles with specific properties can be produced by the chemical polymerisation of a range of 3-alkylpyrroles in the presence of textiles. The morphologies of these coatings are altered from the traditional conductive coatings. Comparison using a SEM reveals substantial differences.

Frictional and tensile properties of conducting polymer coated wool and alpaca fibers

Wool and alpaca fibers were coated with polypyrrole by vapor-phase polymerisation method. The changes in frictional and tensile properties of the single fibers upon coating with the conductive polymer are presented. Coating a thin layer of polypyrrole on the alpaca and wool fibers results in a significant reduction in the fiber coefficient of friction, as the conducting polymer layer smooths the protruding edges of the fiber scales. It also reduces the directional friction effect of the fibers. Depending on the type of fiber, the coating may slightly enhance the tensile properties of the coated fibers.

Polymerising pyrrole on polyester textiles and controlling the conductivity through coating thickness

The surface resistance of polypyrrole (PPy)-coated polyester fabrics was investigated and related to coating thickness, which was controlled by adjusting the reactant concentrations. The thickness of the coating initially increased rapidly followed by a steady increase when the concentration of pyrrole (Py) was larger than a concentration of approximately 0.4 mg/ml. The surface resistance decreased from 10⁶ to 10³ Ω with increase in pyrrole concentration within 0.2 mg/ml until the concentration reached a value of about 0.4 mg/ml, above which the rate of decrease diminished. The effect of initial treatment with monomer or oxidant prior to polymerisation reaction with regards to thickness and surface resistance was minimal. The immersion time of the textile into the monomer solution prior to polymerisation reaction did not have a significant effect on the abrasion resistance.

Polypyrrole-coated electrospun nanofibre membranes for recovery of Au(III) from aqueous solution

In this paper, for the first time, polypyrrole-coated electrospun nanofibre mats have been used as separation membranes to electrolessly recover Au from aqueous [Au(III)Cl₄]− solutions, based on a continuous-flow membrane separation process. With a [Au(III)Cl₄]− solution passing through the nanofibre membrane, the Au(III) ions were converted into elemental Au. The gold recovered was deposited on the nanofibre membranes in the form of Au particles, as confirmed by EDX and XPS measurements. It has been found that the polypyrrole-coated electrospun nanofibres are good candidate membrane material for the recovery of Au, and the recovery efficiency is affected by the membrane thickness, the permeate flux rate and the initial [Au(III)Cl₄]− concentration.

Adsorption and voltammetry of butyltin compounds

The adsorption of tributyltin onto materials commonly used for the construction of sampling and analytical equipment from aqueous solutions of varying ionic composition has been examined. The adsorption appears to be controlled by non-polar interactions between tributyltin and the surface involved. Since the speciation and hence polarity of tributyltin is affected by the ionic composition of the medium, the extent of adsorption is affected by the salinity and pH of a sample. The adsorption is rapid and, unless strategies are adopted to eliminate its effects, may render analytical results invalid. The electrochemistry of tributyltin, dibutyltin and monobutyltin, individually and in mixtures, has been investigated in aqueous media at mercury electrodes. The basic electrochemistry of each compound is summarised by the reaction BunSn (4-n)+ + (4-n)e- right left harpoons BunSn where n is the number of butyl groups attached to the tin atom. However, the electrochemistry of each compound is largely confined to the surface of the mercury electrode, and the simplicity of the above reaction is disrupted by polymerisation reactions and by butyl exchange processes occurring with the mercury electrode. When mixtures of butyltin compounds are present, the various processes that occur for each individual compound interfere with each other. A direct voltaminetric method for the determination of butyltin compounds in natural waters is therefore probably not possible.

Superhydrophobic electrospun POSS-PMMA copolymer fibres with highly ordered nanofibrillar and surface structures

A POSS-PMMA copolymer has been synthesised by conventional free-radical polymerisation reaction. Uniform electrospun fibres from this copolymer showed a water contact angle as high as 1651 with a sliding angle as low as 61. For the first time, we found that the electrospun fibres had a bundled nanofibril secondary structure with an ordered POSS morphology on the fibre surface.

Characterization and application of conducting polymer coated textiles

This paper reports on some physical properties of a conducting polymer, polypyrrole, coated textiles. Polypyrrole was coated on textiles chemically through in-situ solution or vapor polymerisation to produce conducting textiles. The effects of the conductive coating on the physical and mechanical properties of the fibrous materials are presented. The coating durability and conductivity of the textiles have also been examined.

An investigation of polypyrrole coated conductive textiles

This research first clarified a possible chemical reaction between a dispersing dye and the conducting polymer polypyrrole. Then, the effect of acidic dyes as dopants on the colours, conductivity and thermal stability of polypyrrole were measured. Finally, the polypyrrole nanoparticles were prepared by a microemulsion polymerisation technique.