Mechanical behaviour of unsaturated kaolin (with isotropic and anisotropic stress history). Part 1: wetting and compression behaviour

Over the last 40 years considerable progress has been made in understanding the complex behaviour of unsaturated soils. Research using constitutive modelling has extended the critical state framework and the concept of yielding in saturated soils to encompass unsaturated soils experiencing suction. However, validation testing of the framework for unsaturated soils has shown disagreement with the basic propositions. The main reason for this disparity is the anisotropic properties of the soil specimens tested as a result of preparation using one-dimensional compaction. The paper describes the detailed testing carried out to justify this statement. As part of the work presented, samples of unsaturated kaolin were prepared using isotropic compression. The suctions in these samples were reduced to predefined values by wetting under low isotropic loading. The pore size distributions, the pressure–volume relationships and yielding under subsequent isotropic loading are compared with tests on samples prepared by statically compressing kaolin into a one-dimensional compaction mould. The anisotropically compressed samples had initial water contents and specific volumes similar to those of the isotropically prepared samples and were also tested under reducing suctions; they exhibited distinctly different behaviour when tested under similar conditions. The results obtained from the isotropically prepared and tested samples have shown, probably for the first time, the existence of a unique normal compression surface that is not dependent on the initial conditions of the samples. The shape of the loading–collapse (LC) yield locus is shown to be different from the generally accepted form.

Attitudes, norms, identity and environmental behaviour: Using an expanded theory of planned behaviour to predict participation in a kerbside recycling programme

In an effort to contribute to greater understanding of norms and identity in the theory of planned behaviour, an extended model was used to predict residential kerbside recycling, with self-identity, personal norms, neighbourhood identification, and injunctive and descriptive social norms as additional predictors. Data from a field study (N = 527) using questionnaire measures of predictor variables and an observational measure of recycling behaviour supported the theory. Intentions predicted behaviour, while attitudes, perceived control, and the personal norm predicted intention to recycle. The interaction between neighbourhood identification and injunctive social norms in turn predicted personal norms. Self-identity and the descriptive social norm significantly added to the original theory in predicting intentions as well as behaviour directly. A replication survey on the self-reported recycling behaviours of a random residential sample (N = 264) supported the model obtained previously. These findings offer a useful extension of the theory of planned behaviour and some practicable suggestions for pro-recycling interventions. It may be productive to appeal to self-identity by making people feel like recyclers, and to stimulate both injunctive and descriptive norms in the neighbourhood.

Sea turtle diving and foraging behaviour around the Greek Island of Kefalonia

The discovery of a shallow water (

Relationship between microstructure and deformation behaviour during dynamic compression in Ti-3Al-5Mo-5V alloy

The relationship between microstructure and deformation and damage behaviour during dynamic compression in Ti-3Al-5Mo-5V alloy has been studied using several experimental techniques, including optical microscopy, scanning electron microscopy and microhardness measurements. It was found that the deformation behaviour during dynamic compression was closely related to deformation parameters. After dynamic deformation, the deformation shear band that formed in the titanium alloy had microhardness similar to that of the matrix. However, the microhardness of the white shear band was much higher than the matrix microhardness. The effects of deformation parameters, including deformation rate and deformation degree, on deformation localisation were investigated. Based on the results from the present work, the microstructure and deformation processing parameters can be optimised. In addition, treatment methods after dynamic compression were explored to restore alloy properties. Using post-deformation heat treatment, the microstructure and property inhomogeneity caused by shear bands could be largely removed.

Average household income, crime, and smoking behaviour in a local area: The Finnish 10-Town study

Social environments, like neighbourhoods, are increasingly recognised as determinants of health. While several studies have reported an association of low neighbourhood socio-economic status with morbidity, mortality and health risk behaviour, little is known of the health effects of neighbourhood crime rates. Using the ongoing 10-Town study in Finland, we examined the relations of average household income and crime rate measured at the local area level, with smoking status and intensity by linking census data of local area characteristics from 181 postal zip codes to survey responses to smoking behaviour in a cohort of 23,008 municipal employees. Gender-stratified multilevel analyses adjusted for age and individual occupational status revealed an association between low local area income rate and current smoking. High local area crime rate was also associated with current smoking. Both local area characteristics were strongly associated with smoking intensity. Among ever-smokers, being an ex-smoker was less likely among residents in areas with low average household income and a high crime rate. In the fully adjusted model, the association between local area income and smoking behaviour among women was substantially explained by the area-level crime rate. This study extends our knowledge of potential pathways through which social environmental factors may affect health. (c) 2007 Elsevier Ltd. All rights reserved.

Influence of molten-state annealing on the phase structure and crystallization behaviour of high impact polypropylene copolymer

The phase structure evolution of high impact polypropylene copolymer (IPC) during molten-state annealing and its influence on crystallization behaviour were studied. An entirely different architecture of the IPC melt was observed after being annealed, and this architecture resulted in variations of the crystallization behaviour. In addition, it was found that the core-shell structure of the dispersed phase was completely destroyed and the sizes of the dispersed domains increased sharply after being annealed at 200 degrees C for 200 min. Through examination of the coarseness of the phase morphology using phase contrast microscopy (PCM), it was found that a co-continuous structure and an abnormal 'sea-island' structure generally appeared with an increase in annealing time. The original matrix PP component appeared as a dispersed phase, whereas the copolymer components formed a continuous 'sea-island' structure. This change is ascribed to the large tension induced by solidification at the phase interface and the great content difference between the components. When the temperature was reduced the structure reverted to its original form. With increasing annealing time, the spherulite profiles became more defined and the spherulite birefringence changed from vague to clear. Overall crystallization rates and nucleation densities decreased, but the spherulite radial growth rates remained almost constant, indicating that molten-state annealing mainly affects the nucleation ability of IPC, due to a coarsened microstructure and decreased interface area. (C) 2011 Elsevier Ltd. All rights reserved.