Studies on radiation pasteurisation of medium fatty fish 1. Control of radiation induced oxidative changes in white pomfret (Stromateus cinereus) by vacuum packaging

Marked differences were observed in proximate biochemical compositions of the skin and muscle of white pomfret. The skin showed comparatively higher content of extractable lipids and was more susceptible to radiation-induced oxidative changes like development of rancid odours and yellow discolouration than the muscle. Irradiation of skin samples under vacuum suppressed these changes. The present paper also reports on the efficacy of vacuum packaging in controlling oxidative rancidity and yellow discolouration in white pomfret skin subjected to irradiation and subsequent storage at 0-2°C.

Packaging and storage studies of dried lizard fish

Packaging and storage studies of salted and dried lizard fish (Saurida sp.) have been conducted using different synthetic films like low density polyethylene (LDPE) of different gauges, high density polyethylene (HDPE) of 200 gauge, polyvinylidene chloride (PVDC) coated 400 MXXT cellophane, 100 gauge polypropylene (PP) and paper laminate of 100 gauge polythene. The films found most effective in the preliminary studies were subsequently used for packaging and storage of dried fish at atmospheric and lower temperature and humidity conditions for confirming their suitability under these conditions. Polyethylene films of higher gauges showed better results under both sets of conditions. PVDC coated cellophane film also performed satisfactorily under the latter conditions which under the former condition got easily attacked by insects. Lower temperature and humidity conditions in general enhanced the storage life of the dried product.

Use of linear low density polythene film for frozen fish packaging

Physical properties of linear low density polythene film of 60 gauge thickness and its suitability as packaging material in frozen fish industry was studied in comparison with conventional 100 gauge low density polythene film. Both were comparable in water vapor transmission rate both at 38°C and -20°C, overall migration test and :flexibility at low temperatures. ·Even though the tearing strength was inferior to the conventional one, it is of no significance in its use in frozen fish industry. The new film worked out to be more economical than the other one.

Shelf-life of rotary and solar tunnel dried SIS products under different packaging and storage conditions

A study was conducted on the shelf-life of rotary and solar tunnel dried SIS products under different packaging and storage conditions. Organoleptically dried products were found in good condition after a storage period of 60 days in ambient and chilled conditions. The moisture content, TVB-N value and bacterial load slightly increased during 60 days of storage in ambient and chilled conditions. The changes in moisture content and bacterial load were faster in ambient temperature than in chilled storage condition whereas changes in TVB-N value was higher in chilled condition than in ambient temperature. The initial moisture content was in the range of 13.71% to 22.84%. After 60 days of storage in ambient and chilled condition the moisture content of dried products was in the range of 15.09% to 25.11% and 14.49% to 25.01%, respectively. The initial TVB-N value was in the range of 10.64 to 17.52 mg/100g and after 60 days of storage in ambient and chilled condition, TVB-N value was in the range of 29.00 to 34.82 mg/100g and 31.41 to 39.11 mg/100g, respectively. The initial bacterial load was in the range of 1.91x10 super(8) to 2.84x10 super(8) and after 60 days of storage in ambient and chilled condition, the bacterial load was in the range of 6.2x10 super(8) to 1.8x10 super(9) and 5.75x10 super(7) to 5.05x10 super(8) CFU/g, respectively. The results of the present study indicated that it is necessary to store high quality dried products in sealed packed in chilled condition to ensure good quality up to a certain period of time.

Status of the shrimp sector in Bangladesh in the context of HACCP and trade issues: a review

Shrimp culture in Bangladesh has emerged as an important aquaculture industry over the last three decades although its culture in greater parts of the farming area is done in traditional ways. In the meantime, the government of Bangladesh has taken necessary measures along with the private sectors to increase production, upgrade processing industries and to promote export performance. Long supply chain in raw material collection, inadequate infrastructure facilities, poor level of cool chain and lack of adequate HACCP-based training on hygiene and sanitation of different groups of people involved in the field level are the main problems of quality loss of raw materials. Shortage of raw materials results in poor capacity utilization of the processing plants. The growth of bagda (P. monodon) hatchery has expanded rapidly over the last few years, remaining mostly concentrated in Cox's Bazar region is enough to meet the target production. However, there is a shortage of pelleted shrimp feed in Bangladesh. A large number of export processors are now producing increasing amounts of value-added products such as individually quick-frozen, peeled and divined, butterfly cut shrimp, as well as cooked products. The export earnings from value added products is about half of the total export value. About 95% of total fish products are exported to European countries, USA and Japan and the remaining to the Southeast Asia and the Middle East. Most of the EU approved shrimp processing industries have been upgraded with laboratory facilities and provided HACCP training to their workers. As of now, HACCP is applied on the processing plants, but to ensure the quality of raw materials and to reduce risks, shrimp farms are also required to adopt HACCP plan. There is increased pressure time to time from importing countries for fish processors to establish effective quality assurance system in processing plants. Fish Inspection and Quality Control (FIQC) of the Department of Fisheries while having moderately equipped laboratories with chemical, bio-chemical and microbiological testing facilities and qualified technical personnel, the creation of facilities for testing of antibiotics is underway. FIQC mainly supervises quality aspects of the processing plants and has little or no control over raw material supply chains from farm to processing plants. Bangladesh export consignments sometimes face rejection due to reported poor quality of the products. Three types of barriers are reported for export of shrimp to EU countries. These are:(1) government participation in trade and restrictive practices (state aid, countervailing duties, state trading enterprises, government monopoly practices), customs and administrative entry procedures (anti-dumping duties, customs valuation, classification, formalities, rules of origin); (2) technical barriers to trade or TBT (technical regulations, standards, testing, certification arrangement); (3) specific limitations (quantitative restrictions, import licensing, embargoes, exchange control, discriminatory sourcing, export restraints, measures to regulate domestic prices, requirements concerning marking, labeling and packaging).

Study on the sustainability of FPC produced from Kilka (Clupeonella engrauliformis, C. grimmi and C. cultriventris) in two vacuum packaging and modified atmosphere packaging at different environmental factors

Fish protein concentrate (FPC) is a healthy, sustainable and high nutritive product which sanitized produced from fishes in which, protein and other nutrients are more concentrated than in fresh fishes. The aim of this research is to study on the sustainability of FPC produced from Kilka (Clupeonella engrauliformis , C. grimmi and C. cultriventris) in two Vaccum Packaging and Modified Atmosphere Packaging at different environmental factors during six months. In our study the analysis of FPC protein showed 91.2%, lipid: 0.5%, ash: 3.6%, moisture: 2.3%, Total Volatile Nitrogen: 10 ml/100gr and peroxide: 5meq/kg. Amino acids and fatty acids were also determined. Bacteria and Fungi were lower than 1000 colony. Samples are kept in different condition of temperature (5, 20 and 35 degree centigrade), humidity (25, 40 and 90 percent) and light and dark environment in six month. Lipid rate in FPC after 6 months in VP and MAP (60% C02, 30 % N2 and 10% O2), packages was decreased but was not significant (P>0.05). It was also detected that increase temperature lead to more decrease in lipid content. Protein rate of FPC was decreased from 91.2% to 73.6% during six months at 35°C in VP Package and from 91.2% to 69.4% in MAP package. These changes were significant (P<0.05). TVN and PV rate in FPC after 6 months in VP and MAP packages was increased but was significant (P<0.05). Amino acids and fatty acids were also determined. But more changes in MAP packages was detected.

Code-specific policy gradient rules for spiking neurons

Although it is widely believed that reinforcement learning is a suitable tool for describing behavioral learning, the mechanisms by which it can be implemented in networks of spiking neurons are not fully understood. Here, we show that different learning rules emerge from a policy gradient approach depending on which features of the spike trains are assumed to influence the reward signals, i.e., depending on which neural code is in effect. We use the framework of Williams (1992) to derive learning rules for arbitrary neural codes. For illustration, we present policy-gradient rules for three different example codes - a spike count code, a spike timing code and the most general "full spike train" code - and test them on simple model problems. In addition to classical synaptic learning, we derive learning rules for intrinsic parameters that control the excitability of the neuron. The spike count learning rule has structural similarities with established Bienenstock-Cooper-Munro rules. If the distribution of the relevant spike train features belongs to the natural exponential family, the learning rules have a characteristic shape that raises interesting prediction problems.

Polymer film packaging for food: An environmental assessment

Plastics packaging is ubiquitous in the food industry, fulfilling a range of functions including a significant role in reducing food waste. The public perception of packaging, however, is dominated by end-of-life aspects, when the packaging becomes waste often found littering urban, rural and marine environments. A balanced analysis of the role of packaging demands that the whole lifecycle is examined, looking not only at the packaging itself but also at the product being packaged. This paper focuses on packaging in the meat and cheese industry, analysing the impact of films and bags. The functions of packaging are defined and the environmental impact of delivering these functions is assessed. The influence of packaging on levels of waste and energy consumption elsewhere in the system is examined, including the contentious issue of end-of-life for packaging. Strategies for minimizing the environmental impact of the packaging itself involve reduction in the amount of material used (thinner packaging), rather than emphasizing end-of-life issues. Currently, with polymer recycling not at a high level, evidence suggests that this strategy is justifiable. Biodegradable polymers may have some potential for improving environmental performance, but are still problematic. The conclusion is that although current packaging is in some ways wasteful and inefficient, the alternatives are even less desirable. © 2013 Elsevier B.V. All rights reserved.

Symmetry-extended counting rules for periodic frameworks.

A symmetry-adapted version of the Maxwell rule appropriate to periodic bar-and-joint frameworks is obtained, and is further extended to body-and-joint systems. The treatment deals with bodies and forces that are replicated in every unit cell, and uses the point group isomorphic to the factor group of the space group of the framework. Explicit expressions are found for the numbers and symmetries of detectable mechanisms and states of self-stress in terms of the numbers and symmetries of framework components. This approach allows detection and characterization of mechanisms and states of self-stress in microscopic and macroscopic materials and meta-materials. Illustrative examples are described. The notion of local isostaticity of periodic frameworks is extended to include point-group symmetry.

High-resolution strain sensing on steel by Silicon-On-Insulator flexural resonators fabricated with chip-level vacuum packaging

This paper reports on the fabrication and characterization of high-resolution strain sensors for steel based on Silicon On Insulator flexural resonators manufactured with chip-level LPCVD vacuum packaging. The sensors present high sensitivity (120 Hz/μ), very high resolution (4 n), low drift, and near-perfect reversibility in bending tests performed in both tensile and compressive strain regimes. © 2013 IEEE.

High-frequency characterization of packaging network in to-can photodiode modules

A simple method for analyzing the effects of TO packaging network on the high-frequency response of photodiode modules is presented. This method is established based on the relations of the scattering parameters of the packaging network, photodiode chip, and module. It is shown that the results obtained by this method agree well with those obtained by the conventional comparison method. The proposed method is much more convenient since only the electrical domain measurements are required. (C) 2008 Wiley Periodicals, Inc.

Frequency bandwidth estimation of TO packaging techniques for laser modules

Two simple methods for estimating the potential modulation bandwidth of TO packaging technique are presented. The first method is based upon the comparison of the measured frequency responses of the laser diodes and the TO laser modules, and the second is from the equivalent circuit for the test fixture, the TO header, the submount and the bonding wire. It is shown that the TO packaging techniques used in the experiments can potentially achieve a frequency bandwidth of over 10.5 GHz, and the two proposed methods give similar results.