Characterization of hydrothermal carbonization products from woodchip

L’idrotermocarbonizzazione è un processo che permette di convertire un’elevata quantità di materie prime solide in carbone. Ciò viene realizzato inserendo come sostanza in input, oltre alla materia prima iniziale, acqua liquida e, successivamente, riscaldando fino a 180°C, temperatura alla quale inizia la reazione esotermica ed il processo diventa di tipo stand-alone. Tale reazione presenta un tempo di reazione variabile nel range di 4÷12 h. I prodotti in uscita sono costituiti da una sostanza solida che ha le caratteristiche del carbone marrone naturale e un’acqua di processo, la quale è altamente inquinata da composti organici. In questo elaborato viene illustrata una caratterizzazione dei prodotti in uscita da un impianto di idrotermo carbonizzazione da laboratorio, il quale utilizza in input pezzi di legno tagliati grossolanamente. Inizialmente tale impianto da laboratorio viene descritto nel dettaglio, dopodiché la caratterizzazione viene effettuata attraverso DTA-TGA dei materiali in ingresso ed uscita; inoltre altre sostanze vengono così analizzate, al fine di confrontarle col char ed i pezzi di legno. Quindi si riporta anche un’analisi calorimetrica, avente l’obiettivo di determinare il calore di combustione del char ottenuto; attraverso questo valore e il calore di combustione dei pezzi di legno è stato possibile calcolare l’efficienza di ritenzione energetica del processo considerato, così come la densificazione energetica riscontrata nel materiale in uscita. In aggiunta, è stata eseguita un’analisi delle specie chimiche elementari sul char ed il legno in modo da determinare i seguenti parametri: fattori di ritenzione e fattori di ritenzione pesati sulla massa in termini di concentrazione di C, H, N e S. I risultati ottenuti da tale analisi hanno permesso di effettuare una caratterizzazione del char. Un tentativo di attivazione del char viene riportato, descrivendo la procedura di attivazione seguita e la metodologia utilizzata per valutare il buon esito o meno di tale tentativo di attivazione. La metodologia consiste di uno studio isotermo dell’adsorbimento di acido acetico sul char “attivato” attraverso una titolazione. I risultati sperimentali sono stati fittati usando le isoterme di Langmuir e Freundlich e confrontati con le capacità di adsorbimento del semplice char e di un campione di carbone attivo preso da un’azienda esterna. Infine si è considerata l’acqua di processo, infatti un’analisi fotometrica ne ha evidenziato le concentrazioni di TOC, COD, ioni nitrato e ioni fosfato. Questi valori sono stati conseguentemente confrontati con i limiti italiani e tedeschi massimi ammissibili per acque potabili, dando quindi un’idea quantitativa della contaminazione di tale acqua di processo.

Validation of a modified AVHRR aerosol optical depth retrieval algorithm over Central Europe

The Advanced Very High Resolution Radiometer (AVHRR) carried on board the National Oceanic and Atmospheric Administration (NOAA) and the Meteorological Operational Satellite (MetOp) polar orbiting satellites is the only instrument offering more than 25 years of satellite data to analyse aerosols on a daily basis. The present study assessed a modified AVHRR aerosol optical depth τa retrieval over land for Europe. The algorithm might also be applied to other parts of the world with similar surface characteristics like Europe, only the aerosol properties would have to be adapted to a new region. The initial approach used a relationship between Sun photometer measurements from the Aerosol Robotic Network (AERONET) and the satellite data to post-process the retrieved τa. Herein a quasi-stand-alone procedure, which is more suitable for the pre-AERONET era, is presented. In addition, the estimation of surface reflectance, the aerosol model, and other processing steps have been adapted. The method's cross-platform applicability was tested by validating τa from NOAA-17 and NOAA-18 AVHRR at 15 AERONET sites in Central Europe (40.5° N–50° N, 0° E–17° E) from August 2005 to December 2007. Furthermore, the accuracy of the AVHRR retrieval was related to products from two newer instruments, the Medium Resolution Imaging Spectrometer (MERIS) on board the Environmental Satellite (ENVISAT) and the Moderate Resolution Imaging Spectroradiometer (MODIS) on board Aqua/Terra. Considering the linear correlation coefficient R, the AVHRR results were similar to those of MERIS with even lower root mean square error RMSE. Not surprisingly, MODIS, with its high spectral coverage, gave the highest R and lowest RMSE. Regarding monthly averaged τa, the results were ambiguous. Focusing on small-scale structures, R was reduced for all sensors, whereas the RMSE solely for MERIS substantially increased. Regarding larger areas like Central Europe, the error statistics were similar to the individual match-ups. This was mainly explained with sampling issues. With the successful validation of AVHRR we are now able to concentrate on our large data archive dating back to 1985. This is a unique opportunity for both climate and air pollution studies over land surfaces.

Flexibles WebMapping durch eigene Erweiterungen des Esri JavaScript API

Wie viele andere GIS-Dienstleister der Öffentlichen Verwaltung auch, ist die Abteilung Geoinformation und Vermessung des Kantons Luzern (geo) mit der wachsenden Nachfrage nach flexiblen Webmapping-Applikationen konfrontiert. Neben klassischen Stand-Alone-Anwendungen unterschiedlicher Komplexität werden zunehmend integrierte Lösungen aktuell. Drittanbieter-Applikationen sollen mit Mapping- und GIS-Funktionalitäten erweitert werden. Um den vielfältigen Ansprüchen gerecht zu werden, hat geo zu diesem Zweck einen Viewer (MapViewer LU 4.0) und ein eigenes API (geo.api LU) inklusive Print-Service entwickelt. Das API baut als Erweiterung auf dem bestehenden Esri JavaScript API auf. In der Präsentation werden Anforderungen, Lösungsansätze sowie die konkrete Umsetzung mittels Anwendungs-Demo vorgestellt.

DESIGN AND IMPLEMENTATION OF HOME USE PORTABLE SMART ELECTRONICS

The widespread of low cost embedded electronics makes it easier to implement the smart devices that can understand either the environment or the user behaviors. The main object of this project is to design and implement home use portable smart electronics, including the portable monitoring device for home and office security and the portable 3D mouse for convenient use. Both devices in this project use the MPU6050 which contains a 3 axis accelerometer and a 3 axis gyroscope to sense the inertial motion of the door or the human hands movement. For the portable monitoring device for home and office security, MPU6050 is used to sense the door (either home front door or cabinet door) movement through the gyroscope, and Raspberry Pi is then used to process the data it receives from MPU6050, if the data value exceeds the preset threshold, Raspberry Pi would control the USB Webcam to take a picture and then send out an alert email with the picture to the user. The advantage of this device is that it is a small size portable stand-alone device with its own power source, it is easy to implement, really cheap for residential use, and energy efficient with instantaneous alert. For the 3D mouse, the MPU6050 would use both the accelerometer and gyroscope to sense user hands movement, the data are processed by MSP430G2553 through a digital smooth filter and a complementary filter, and then the filtered data will pass to the personal computer through the serial COM port. By applying the cursor movement equation in the PC driver, this device can work great as a mouse with acceptable accuracy. Compared to the normal optical mouse we are using, this mouse does not need any working surface, with the use of the smooth and complementary filter, it has certain accuracy for normal use, and it is easy to be extended to a portable mouse as small as a finger ring.

XML for Model Specification in Neuroscience

One of the main roles of the Neural Open Markup Language, NeuroML, is to facilitate cooperation in building, simulating, testing and publishing models of channels, neurons and networks of neurons. MorphML, which was developed as a common format for exchange of neural morphology data, is distributed as part of NeuroML but can be used as a stand-alone application. In this collection of tutorials and workshop summary, we provide an overview of these XML schemas and provide examples of their use in down-stream applications. We also summarize plans for the further development of XML specifications for modeling channels, channel distributions, and network connectivity.

Plattform Musikalische Bildung

Bei der Plattform Musikalische Bildung handelt es sich um ein Projekt der Hochschule für Musik Detmold. Die Plattform vereinigt in sich Ideen zum vernetzten Musiklernen, neu entwickelten Online-Musiklern-Tools sowie den Austausch und die Modifizierung dieser erstellten Kurse durch andere Dozenten und Lehrenden. Die Plattform steht allen Dozenten und Lehrern, Studierenden und Schülern an Hochschulen, aber auch Musikschulen und allgemein bildenden Schulen kostenlos zur Verfügung. Auf die Einblendung von Werbebannern wird verzichtet. Die Inbetriebnahme einer Betaversion ist im Oktober 2014 erfolgt. Weitere Ausbaustufen sind in Planung aber noch nicht gegenfinanziert.

Narrated PowerPoints and Audio Podcasts in Clinical Teaching: One Clerkship's Experience

Introduction: Clinical medical education is increasingly utilizing novel technological approaches in order to supplement traditional lecture-based didactics. The Neurology Core Clerkship at Baylor College of Medicine is a four week required course taken by clinical medical students. Given the large amount of information to be disseminated in a short period of time, part of the didactic material has been provided online in the form of narrated PowerPoint files or lecture audio tracks along with stand-alone PowerPoint files. The narrated files are generated using the native PowerPoint narration function while the stand-alone audio files are created as MP3 format files using an inexpensive digital recording device. [See PDF for complete abstract]

Combination of Psychological Intervention and Phosphodiesterase-5 Inhibitors for Erectile Dysfunction: A Narrative Review and Meta-Analysis

INTRODUCTION Erectile dysfunction (ED) is an increasing health problem that demands effective treatment. There is evidence that phosphodiesterase-5 inhibitors (PDE5-Is) and psychological intervention (PI) are effective treatment options; however, little is known about their comparative efficacy and the efficacy of combined treatments. AIM The aim of this systematic review and meta-analysis is to evaluate the comparative efficacy of PI, PDE5-Is, and their combination in the treatment of ED. MAIN OUTCOME MEASURES Primary outcome was ED symptoms, and secondary outcome was sexual satisfaction of the patient. METHODS A systematic literature search was conducted in order to identify relevant articles published between 1998 and 2012. We included randomized controlled trials and controlled trials comparing PI with PDE5-I treatment or one of them against a combination of both. RESULTS Eight studies with a total number of 562 patients were included in the meta-analysis. The results of the included studies are inconclusive, though they show a trend towards a larger effect of combined treatment compared with PI or PDE5-I treatment alone. The meta-analysis found that, overall, combined treatment was more efficacious for ED symptoms than PDE5-I treatment or PI alone. Combined treatment was more efficacious than PDE5-I use alone on sexual satisfaction. No differences were found between PDE5-Is and PI as stand-alone treatments. None of the moderators (treatment duration, methodological quality, or researcher allegiance) altered the effects. CONCLUSIONS The combination of PI and PDE5-Is is a promising strategy for a favorable outcome in ED and can be considered as a first-choice option for ED patients. Stronger RCTs are required to confirm this initial finding. Schmidt HM, Munder T, Gerger H, Frühauf S, and Barth J. Combination of psychological intervention and phosphodiesterase-5 inhibitors for erectile dysfunction: A narrative review and meta-analysis. J Sex Med **;**:**-**.

Analytical Models of Exoplanetary Atmospheres. II. Radiative Transfer via the Two-Stream Approximation

We present a comprehensive analytical study of radiative transfer using the method of moments and include the effects of non-isotropic scattering in the coherent limit. Within this unified formalism, we derive the governing equations and solutions describing two-stream radiative transfer (which approximates the passage of radiation as a pair of outgoing and incoming fluxes), flux-limited diffusion (which describes radiative transfer in the deep interior) and solutions for the temperature-pressure profiles. Generally, the problem is mathematically under-determined unless a set of closures (Eddington coefficients) is specified. We demonstrate that the hemispheric (or hemi-isotropic) closure naturally derives from the radiative transfer equation if energy conservation is obeyed, while the Eddington closure produces spurious enhancements of both reflected light and thermal emission. We concoct recipes for implementing two-stream radiative transfer in stand-alone numerical calculations and general circulation models. We use our two-stream solutions to construct toy models of the runaway greenhouse effect. We present a new solution for temperature-pressure profiles with a non-constant optical opacity and elucidate the effects of non-isotropic scattering in the optical and infrared. We derive generalized expressions for the spherical and Bond albedos and the photon deposition depth. We demonstrate that the value of the optical depth corresponding to the photosphere is not always 2/3 (Milne's solution) and depends on a combination of stellar irradiation, internal heat and the properties of scattering both in optical and infrared. Finally, we derive generalized expressions for the total, net, outgoing and incoming fluxes in the convective regime.

Digital Data Collection and Processing in Field and Lab: The Approach of Kinneret Regional Project

The paper showcases the field- and lab-documentation system developed for Kinneret Regional Project, an international archaeological expedition to the Northwestern shore of the Sea of Galilee (Israel) under the auspices of the University of Bern, the University of Helsinki, Leiden University and Wofford College. The core of the data management system is a fully relational, server-based database framework, which also includes time-based and static GIS services, stratigraphic analysis tools and fully indexed document/digital image archives. Data collection in the field is based on mobile, hand-held devices equipped with a custom-tailored stand-alone application. Comprehensive three-dimensional documentation of all finds and findings is achieved by means of total stations and/or high-precision GPS devices. All archaeological information retrieved in the field – including tachymetric data – is synched with the core system on the fly and thus immediately available for further processing in the field lab (within the local network) or for post-excavation analysis at remote institutions (via the WWW). Besides a short demonstration of the main functionalities, the paper also presents some of the key technologies used and illustrates usability aspects of the system’s individual components.

Highlights in Analytical Chemistry in Switzerland: OMA & OPA - A Software Tool for Mass Spectrometric Sequencing of Nucleic Acids

Oligonucleotides comprising unnatural building blocks, which interfere with the translation machinery, have gained increased attention for the treatment of gene-related diseases (e.g. antisense, RNAi). Due to structural modifications, synthetic oligonucleotides exhibit increased biostability and bioavailability upon administration. Consequently, classical enzyme-based sequencing methods are not applicable to their sequence elucidation and verification. Tandem mass spectrometry is the method of choice for performing such tasks, since gas-phase dissociation is not restricted to natural nucleic acids. However, tandem mass spectrometric analysis can generate product ion spectra of tremendous complexity, as the number of possible fragments grows rapidly with increasing sequence length. The fact that structural modifications affect the dissociation pathways greatly increases the variety of analytically valuable fragment ions. The gas-phase dissociation of oligonucleotides is characterized by the cleavage of one of the four bonds along the phosphodiester chain, by the accompanying loss of nucleases, and by the generation of internal fragments due to secondary backbone cleavage. For example, an 18-mer oligonucleotide yields a total number of 272’920 theoretical fragment ions. In contrast to the processing of peptide product ion spectra, which nowadays is highly automated, there is a lack of tools assisting the interpretation of oligonucleotide data. The existing web-based and stand-alone software applications are primarily designed for the sequence analysis of natural nucleic acids, but do not account for chemical modifications and adducts. Consequently, we developed a software to support the interpretation of mass spectrometric data of natural and modified nucleic acids and their adducts with chemotherapeutic agents.

A system design for space-based space surveillance

This paper presents the capabilities of a Space-Based Space Surveillance (SBSS) demonstration mission for Space Surveillance and Tracking (SST) based on a micro- satellite platform. The results have been produced in the frame of ESA’s "As sessment Study for Space Based Space Surveillance Demonstration Mission (Phase A) " performed by the Airbus DS consortium. Space Surveillance and Tracking is part of Space Situational Awareness (SSA) and covers the detection, tracking and cataloguing of spa ce debris and satellites. Derived SST services comprise a catalogue of these man-made objects, collision warning, detection and characterisation of in-orbit fragmentations, sub-catalogue debris characterisation, etc. The assessment of SBSS in an SST system architecture has shown that both an operational SBSS and also already a well - designed space-based demonstrator can provide substantial performance in terms of surveillance and tracking of beyond - LEO objects. Especially the early deployment of a demonstrator, possible by using standard equipment, could boost initial operating capability and create a self-maintained object catalogue. Unlike classical technology demonstration missions, the primary goal is the demonstration and optimisation of the functional elements in a complex end-to-end chain (mission planning, observation strategies, data acquisition, processing and fusion, etc.) until the final products can be offered to the users. The presented SBSS system concept takes the ESA SST System Requirements (derived within the ESA SSA Preparatory Program) into account and aims at fulfilling some of the SST core requirements in a stand-alone manner. The evaluation of the concept has shown that an according solution can be implemented with low technological effort and risk. The paper presents details of the system concept, candidate micro - satellite platforms, the observation strategy and the results of performance simulations for GEO coverage and cataloguing accuracy

Space-based space surveillance and tracking demonstrator: mission and system design

This paper presents the capabilities of a Space-Based Space Surveillance (SBSS) demonstration mission for Space Surveillance and Tracking (SST) based on a micro-satellite platform. The results have been produced in the frame of ESA’s "Assessment Study for Space Based Space Surveillance Demonstration Mission" performed by the Airbus Defence and Space consortium. The assessment of SBSS in an SST system architecture has shown that both an operational SBSS and also already a well- designed space-based demonstrator can provide substantial performance in terms of surveillance and tracking of beyond-LEO objects. Especially the early deployment of a demonstrator, possible by using standard equipment, could boost initial operating capability and create a self-maintained object catalogue. Furthermore, unique statistical information about small-size LEO debris (mm size) can be collected in-situ. Unlike classical technology demonstration missions, the primary goal is the demonstration and optimisation of the functional elements in a complex end-to-end chain (mission planning, observation strategies, data acquisition, processing, etc.) until the final products can be offered to the users and with low technological effort and risk. The SBSS system concept takes the ESA SST System Requirements into account and aims at fulfilling SST core requirements in a stand-alone manner. Additionally, requirements for detection and characterisation of small-sizedLEO debris are considered. The paper presents details of the system concept, candidate micro-satellite platforms, the instrument design and the operational modes. Note that the detailed results of performance simulations for space debris coverage and cataloguing accuracy are presented in a separate paper “Capability of a Space-based Space Surveillance System to Detect and Track Objects in GEO, MEO and LEO Orbits” by J. Silha (AIUB) et al., IAC-14, A6, 1.1x25640.

SALSA: a tool to estimate the stray light contamination for low-Earth orbit observatories

Stray light contamination reduces considerably the precision of photometric of faint stars for low altitude spaceborne observatories. When measuring faint objects, the necessity of coping with stray light contamination arises in order to avoid systematic impacts on low signal-to-noise images. Stray light contamination can be represented by a flat offset in CCD data. Mitigation techniques begin by a comprehensive study during the design phase, followed by the use of target pointing optimisation and post-processing methods. We present a code that aims at simulating the stray-light contamination in low-Earth orbit coming from reflexion of solar light by the Earth. StrAy Light SimulAtor (SALSA) is a tool intended to be used at an early stage as a tool to evaluate the effective visible region in the sky and, therefore to optimise the observation sequence. SALSA can compute Earth stray light contamination for significant periods of time allowing missionwide parameters to be optimised (e.g. impose constraints on the point source transmission function (PST) and/or on the altitude of the satellite). It can also be used to study the behaviour of the stray light at different seasons or latitudes. Given the position of the satellite with respect to the Earth and the Sun, SALSA computes the stray light at the entrance of the telescope following a geometrical technique. After characterising the illuminated region of the Earth, the portion of illuminated Earth that affects the satellite is calculated. Then, the flux of reflected solar photons is evaluated at the entrance of the telescope. Using the PST of the instrument, the final stray light contamination at the detector is calculated. The analysis tools include time series analysis of the contamination, evaluation of the sky coverage and an objects visibility predictor. Effects of the South Atlantic Anomaly and of any shutdown periods of the instrument can be added. Several designs or mission concepts can be easily tested and compared. The code is not thought as a stand-alone mission designer. Its mandatory inputs are a time series describing the trajectory of the satellite and the characteristics of the instrument. This software suite has been applied to the design and analysis of CHEOPS (CHaracterizing ExOPlanet Satellite). This mission requires very high precision photometry to detect very shallow transits of exoplanets. Different altitudes and characteristics of the detector have been studied in order to find the best parameters, that reduce the effect of contamination. © (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

Is The Allergen Really Needed in Allergy Immunotherapy?

Immunotherapy for type I allergies is well established and is regarded to be the most efficient treatment option besides allergen avoidance. As of today, different forms of allergen preparations are used in this regard, as well as different routes of application. Virus-like particles (VLPs) represent a potent vaccine platform with proven immunogenicity and clinical efficacy. The addition of toll-like receptor ligands and/or depot-forming adjuvants further enhances activation of innate as well as adaptive immune responses. CpG motifs represent intensively investigated and potent direct stimulators of plasmacytoid dendritic cells and B cells, while T cell responses are enhanced indirectly through increased antigen presentation and cytokine release. This article will focus on the function of VLPs loaded with DNA rich in nonmethylated CG motifs (CpGs) and the clinical experience gained in the treatment of allergic rhinitis, demonstrating clinical efficacy also if administered without allergens. Several published studies have demonstrated a beneficial impact on allergic symptoms by treatment with CpG-loaded VLPs. Subcutaneous injection of VLPs loaded with CpGs was tested with or without the adjuvant alum in the presence or absence of an allergen. The results encourage further investigation of VLPs and CpG motifs in immunotherapy, either as a stand-alone product or as adjuvants for allergen-specific immunotherapy.