A novel nanostructured composite formed by interaction of copper octa(3-aminopropyl)octasilsesquioxane with azide ligands: Preparation, characterization and a voltammetric application

This study presents the preparation, characterization and application of copper octa(3-aminopropyl)octasilsesquioxane following its subsequent reaction with azide ions (ASCA). The precursor (AC) and the novel compound (ASCA) were characterized by Fourier transform infrared spectra (FTIR), nuclear magnetic resonance (NMR), electron paramagnetic resonance (EPR), scanning electronic microscopy (SEM), X-ray diffraction (XRD), Thermogravimetric analyses and voltammetric technique. The cyclic voltammogram of the modified graphite paste electrode with ASCA (GPE-ASCA), showed one redox couple with formal potential (E(1/2)(ox)) = 0.30 V and an irreversible process at 1.1 V (vs. Ag/AgCl; NaCl 1.0 M; v = 20 mV s(-1)). The material is very sensitive to nitrite concentrations. The modified graphite paste electrode (GPE-ASCA) gives a linear range from 1.0 x 10(-4) to 4.0 x 10(-3) mol L(-1) for the determination of nitrite, with a detection limit of 2.1 x 10(-4) mol L(-1) and the amperometric sensitivity of 8.04 mA/mol L(-1). (C) 2010 Elsevier Ltd. All rights reserved.

Deformation behavior of nanostructured aluminum alloy processed by severe plastic deformation

Microstructure and deformation behavior of the commercial aluminum-based Al7.5%Zn–2.7%Mg–2.3%Cu–0.15%Zr alloy subjected to high pressure torsion (HPT) were studied in the present work. A small grain size less than 100 nm, high level of internal stresses and presence of second phase nanoparticles were revealed by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The nanostructured alloy processed by HPT exhibits tensile strength of 800 MPa and ductility of 20% at optimal temperature-strain rate conditions. Unusual influence of a short pre-annealing on tensile strength and ductility of as-processed alloy is discussed.

Modeling of the mechanical behavior of nanostructured HSLA steels

In the present paper the basic strengthening mechanisms operating in microstructures are discussed with respect to their application in submicron/nano materials. This analysis focuses on these strengthening mechanisms in bcc microstructures, where the effect of grain boundaries is very strong. An experimental study of the influence of the thermomechanical history on the microstructure and dislocation substructure was performed using two different grades of HSLA steels. As a result, a modified version of the Khan–Huang–Liang flow stress model (KHL) was developed and is discussed in the light of results from the present study. Comparison with experimental results showed significant diversity in the refinement and mechanical responses of each steel, due to different activity of strengthening mechanisms and microalloying elements in the microstructure evolution process. The effect of mechanical and microstructural inhomogeneity in severe plastic deformation (SPD) on the deformation induced grain refinement and mechanical properties was also considered.

Developing fast ion conductors from nanostructured polymers

- Introduction
- Polymer electrolytes
- Composite electrolytes
- Conclusions
- References

Self assembled nanostructured complexes and blends via hydrogen bonding interactions

Small angle X-ray scattering (SAXS) is useful to explain the formation of microstructures and the mechanism of microphase separation in self-assembled blends and complexes. In our study, we have used SAXA to examine the ordered and disordered nanostructures as well as morphological transitions in block copolymer/homopolymer blends and complexes [1,2].

A new route to nanostructured thermosets with block ionomer complexes

We report a novel approach to prepare nanostructured thermosets using block ionomer complexes. Neither block copolymer polystyrene-block-poly(ethylene-ran- butylene)-block-polystyrene (SEBS) nor block ionomer sulfonated SEBS (SSEBS) is miscible with diglycidyl ether of bisphenol A (DGEBA) type epoxy resin. It is thus surprising that the block ionomer complex of SSEBS with a tertiary amine-terminated poly(3-caprolactone) (PCL), denoted as SSEBS-c-PCL, can be used to prepare nanostructured epoxy thermosets. The block ionomer complex SSEBS-c-PCL is synthesized via neutralization of SSEBS with 3-dimethylamino- propylamine-terminated PCL. Sulfonation of SEBS yields the block ionomer SSEBS which is immiscible with epoxy. But the block ionomer complex SSEBS-c-PCL can be easily mixed with DGEBA. When the curing agent 4,4'-methylenedianiline (MDA) is added and the epoxy cures, the system retains the nanostructure. In cured epoxy thermosets containing up to 30 wt% SSEBS-c-PCL, the exclusion of the poly(ethylene-ran-butylene) (EB) phase forms spherical micro-domains surrounded by separated sulfonated polystyrene phase while the PCL side-chains of SSEBS-c-PCL are dissolved in the cured epoxy matrix. The spherical micro-domains are highly aggregated in the epoxy thermosets containing 40 and 50 wt% SSEBS-c-PCL. The existence of epoxy-miscible PCL side-chains in the block ionomer complex SSEBS-c-PCL avoids macro-phase separation. Hence, the block ionomer complex can act as an efficient modifier to achieve nanostructured epoxy thermosets.

Multimodal nanostructured titanium using severe plastic deformation

In the present study, multimodal nanostructured titanium was engineered using severe plastic deformation. The multimodal structured titanium exhibits an ultrahigh strength of over 940 MPa and a large failure elongation of 24%. The ultrahigh strength is mainly derived from the nanostructured structures; whilst the exceptional ductility originates from the large fraction of high angle grain boundaries, micro-scale structures, and the non-equilibrium grain boundary configuration. It is worth noting that apart from dislocation slip processes, the formation of deformation twins reduced the effective slip distance and increased the strain hardening capacity via the Hall-Petch mechanism, leading to high ductility of the multimodal structured titanium.

Nanostructured block copolymer blends and complexes via hydrogen bonding interactions

This thesis investigates the influence of hydrogen bonding interactions on the self-assembly, phase behaviour and nanostructures of the block copolymer/homopolymer systems. The different combinations of block copolymer blends and complexes of AB/C, AB/CD, and ABC/D mixtures open a convenient way to tailor various morphologies with controlled size and shape.