948 resultados para Multicast Application Level
Resumo:
Thousands of tons of pharmaceuticals are consumed yearly worldwide. Due to the continuous and increasing consumption and their incomplete elimination in wastewater treatment plants (WWTP), pharmaceuticals and their metabolites can be detected in receiving waters, although at low concentrations (ng to low μg/L). As bioactive molecules the presence of pharmaceuticals in the aquatic environment must be considered potentially hazardous for the aquatic organisms. In this thesis, the biotransformation and excretion of pharmaceuticals in fish was studied. The main biotransformation pathways of three anti‐inflammatory drugs, diclofenac, naproxen and ibuprofen, in rainbow trout were glucuronidation and taurine conjugation of the parent compounds and their phase I metabolites. The same metabolites were present in fish bile in aquatic exposures as in fish dosed with intraperitoneal injection. Higher bioconcentration factor in bile (BCFbile) was found for ibuprofen when compared to diclofenac and naproxen. Laboratory exposure studies were followed by a study of uptake of pharmaceuticals in a wild fish population living in lake contaminated with WWTP effluents. Of the analyzed 17 pharmaceuticals and six phase I metabolites, only diclofenac, naproxen and ibuprofen was present in bream and roach bile. It was shown, that diclofenac, naproxen and ibuprofen excreted by the liver can be found in rainbow trout and in two native fish species living in the receiving waters. In the bream and roach bile, the concentrations of diclofenac, naproxen and ibuprofen were roughly 1000 times higher than those found in the lake water, while in the laboratory exposures, the bioconcentration of the compounds and their metabolites in rainbow trout bile were at the same level as in wild fish or an order of magnitude higher. Thus, the parent compounds and their metabolites in fish bile can be used as a reliable biomarker to monitor the exposure of fish to environmental pharmaceuticals present in water receiving discharges from WWTPs.
Resumo:
Sustainable production is a principle in which we must meet the needs of the present without compromising the capacity of future generations. Despite the successful development of pesticides against endo and ectoparasites found in domestic ruminants, these parasites are still the major problem of the herbivore production system. The purpose of this study was to know the population of gastrintestinal parasites and their influence on weight gain of calves kept in organic and conventional grazing. Thus, organic and conventional calves were randomly selected in 2008 and 2009. The fecal egg count (FEC) indentified the following genders of helminths: Haemonchus, Trichostrongylus, Oesophagostomum, Cooperia, Strongyloides, Trichuris and oocysts of Eimeria. There was no significant difference (p>0.05) between FEC in organic and conventional animals. Calves younger than 6 months showed significant higher infection (p<0.05) than calves between 7 and 12 months of age. The weight gain observed during the study was of 327g/day and 280g/day for conventional and organic systems animals, respectively. Consequently, the combination of sustainable practices of grazing associated with the selective application of anthelmintics may be a feasible alternative for nematode control in a conventional system and in transition to an organic one.
Resumo:
The Shadow Moiré fringe patterns are level lines of equal depth generated by interference between a master grid and its shadow projected on the surface. In simplistic approach, the minimum error is about the order of the master grid pitch, that is, always larger than 0,1 mm, resulting in an experimental technique of low precision. The use of a phase shift increases the accuracy of the Shadow Moiré technique. The current work uses the phase shifting method to determine the surfaces three-dimensional shape using isothamic fringe patterns and digital image processing. The current study presents the method and applies it to images obtained by simulation for error evaluation, as well as to a buckled plate, obtaining excellent results. The method hands itself particularly useful to decrease the errors in the interpretation of the Moiré fringes that can adversely affect the calculations of displacements in pieces containing many concave and convex regions in relatively small areas.
Resumo:
Longitudinal surveys are increasingly used to collect event history data on person-specific processes such as transitions between labour market states. Surveybased event history data pose a number of challenges for statistical analysis. These challenges include survey errors due to sampling, non-response, attrition and measurement. This study deals with non-response, attrition and measurement errors in event history data and the bias caused by them in event history analysis. The study also discusses some choices faced by a researcher using longitudinal survey data for event history analysis and demonstrates their effects. These choices include, whether a design-based or a model-based approach is taken, which subset of data to use and, if a design-based approach is taken, which weights to use. The study takes advantage of the possibility to use combined longitudinal survey register data. The Finnish subset of European Community Household Panel (FI ECHP) survey for waves 1–5 were linked at person-level with longitudinal register data. Unemployment spells were used as study variables of interest. Lastly, a simulation study was conducted in order to assess the statistical properties of the Inverse Probability of Censoring Weighting (IPCW) method in a survey data context. The study shows how combined longitudinal survey register data can be used to analyse and compare the non-response and attrition processes, test the missingness mechanism type and estimate the size of bias due to non-response and attrition. In our empirical analysis, initial non-response turned out to be a more important source of bias than attrition. Reported unemployment spells were subject to seam effects, omissions, and, to a lesser extent, overreporting. The use of proxy interviews tended to cause spell omissions. An often-ignored phenomenon classification error in reported spell outcomes, was also found in the data. Neither the Missing At Random (MAR) assumption about non-response and attrition mechanisms, nor the classical assumptions about measurement errors, turned out to be valid. Both measurement errors in spell durations and spell outcomes were found to cause bias in estimates from event history models. Low measurement accuracy affected the estimates of baseline hazard most. The design-based estimates based on data from respondents to all waves of interest and weighted by the last wave weights displayed the largest bias. Using all the available data, including the spells by attriters until the time of attrition, helped to reduce attrition bias. Lastly, the simulation study showed that the IPCW correction to design weights reduces bias due to dependent censoring in design-based Kaplan-Meier and Cox proportional hazard model estimators. The study discusses implications of the results for survey organisations collecting event history data, researchers using surveys for event history analysis, and researchers who develop methods to correct for non-sampling biases in event history data.
Resumo:
Multiprocessor system-on-chip (MPSoC) designs utilize the available technology and communication architectures to meet the requirements of the upcoming applications. In MPSoC, the communication platform is both the key enabler, as well as the key differentiator for realizing efficient MPSoCs. It provides product differentiation to meet a diverse, multi-dimensional set of design constraints, including performance, power, energy, reconfigurability, scalability, cost, reliability and time-to-market. The communication resources of a single interconnection platform cannot be fully utilized by all kind of applications, such as the availability of higher communication bandwidth for computation but not data intensive applications is often unfeasible in the practical implementation. This thesis aims to perform the architecture-level design space exploration towards efficient and scalable resource utilization for MPSoC communication architecture. In order to meet the performance requirements within the design constraints, careful selection of MPSoC communication platform, resource aware partitioning and mapping of the application play important role. To enhance the utilization of communication resources, variety of techniques such as resource sharing, multicast to avoid re-transmission of identical data, and adaptive routing can be used. For implementation, these techniques should be customized according to the platform architecture. To address the resource utilization of MPSoC communication platforms, variety of architectures with different design parameters and performance levels, namely Segmented bus (SegBus), Network-on-Chip (NoC) and Three-Dimensional NoC (3D-NoC), are selected. Average packet latency and power consumption are the evaluation parameters for the proposed techniques. In conventional computing architectures, fault on a component makes the connected fault-free components inoperative. Resource sharing approach can utilize the fault-free components to retain the system performance by reducing the impact of faults. Design space exploration also guides to narrow down the selection of MPSoC architecture, which can meet the performance requirements with design constraints.
Resumo:
In the last growing seasons, goosegrass (Eleusine spp.) control failures have been observed following application of glyphosate on Roundup Ready® soybean in Rio Grande do Sul (RS) - Brazil, suggesting this species' resistance to the herbicide. Thus, the objectives of this study were to identify the occurrence of goosegrass resistance to the herbicide glyphosate in RS; and to determine the predominant species of the genus Eleusine, as well as the LD50 and GR50 of the suspected resistant biotypes. Two experiments were conducted under greenhouse conditions: one to identify the biotypes resistant to glyphosate, and the other, a dose-response curve experiment, as well as a study of the botanical characteristics of the species. In the first experiment, 39 biotypes were tested, mainly Eleusine indica, collected with suspected resistance to glyphosate. The glyphosate dose was 2,160 g e.a. ha-1, and the control was evaluated at 28 days after treatment. All biotypes were effectively controlled,with the biotypes from the municipality of Boa Vista do Incra showing greater tolerance. Two biotypes suspected of resistance (12.1 and 12.3) and a susceptible biotype in a dose-response experiment were tested at the following doses: 0, 135, 270, 540, 1,080, 1,620, and 2,160 g e.a. ha-1. The results of this experiment showed that biotype 12.1 does not present resistance to glyphosate and biotype 12.3 has a low level resistance since it is effectively controlled by the herbicide at the maximum dose.
Resumo:
Contemporary higher education operates in an environment of dwindling and parsimonious resources; the increasing need for accountability and relevance to varying stakeholders with differing expectations. These relatively new trends in higher education have been faced by business organizations which have developed different ways of operating in response. This study outlines one way by which business organizations have addressed similar circumstances to show how the Cameroon higher education (HE) could learn from business organizations to manage strategic objectives. The balanced scorecard (BSC) has been used by business organizations to address similar trends. This study evaluates the strategic objectives of Cameroonian higher education using the balanced scorecard. The system level is used to identify the general strategic objectives and one state university is used to represent the translation and implementation of the objectives at the institution level. The BSC principles used include: operational strategic objectives; organizational alignment to the strategy; making strategy everyone’s everyday job; making strategy continual and; mobilizing the leadership for change. The underlying concepts in these principles are communication, consensus, relevance, and a participatory approach. The study employs data from policy documents, relevant literature, websites and semi-structured interviews. The research approach is qualitative and the analyses are done by making meaning of phenomena in their natural contexts. The results show that there is a general knowledge of the strategic objectives but there is disagreement on the relevance of these objectives to HE and on the type of approaches used in implementing the objectives. It was also found that the relevant stakeholders are known, but not all the respondents agree on the importance of these stakeholders. All stakeholders do not have the same level of influence-the state is the most influential. Reporting is sufficiently done but there are insufficient provisions for feedback from stakeholders. The study concludes that the BSC principles can be applied to the management of strategic objectives in Cameroon HE. For Cameroonian higher education, it is recommended that the focus should be first, on developing tools for strategy before the strategy itself. Even though the need for the BSC is confirmed the context does not seem sufficiently ready to implement the BSC as a strategic management tool. The proposed BSC framework can only be used as a communication tool. The barriers to managing strategic objectives in Cameroon HE are related to the communication, consensus, clarity and relevance. However, the system has prospects for improved management and eventual adoption of the BSC as both a strategic management and communication tool. In line with other BSC applications to higher education, this study concluded that it is more feasible to apply the balanced scorecard to a single higher education institution than to a higher education system. The study makes a contribution to the BSC by showing how its principles can be used in a non-business context. The study also opens up possibilities for future research on the same topic in a different context or the same context with a wider scope (more institutions and respondents); the same study with a deeper focus on the interrelationships between the different strategic objectives (strategy maps). The study could also be extended by including the perspectives of the identified stakeholders who are not directly part of the higher education system but constitute the environment in which higher education operates.
Resumo:
The purpose of the present study was to explore the usefulness of the Mexican sequential organ failure assessment (MEXSOFA) score for assessing the risk of mortality for critically ill patients in the ICU. A total of 232 consecutive patients admitted to an ICU were included in the study. The MEXSOFA was calculated using the original SOFA scoring system with two modifications: the PaO2/FiO2 ratio was replaced with the SpO2/FiO2 ratio, and the evaluation of neurologic dysfunction was excluded. The ICU mortality rate was 20.2%. Patients with an initial MEXSOFA score of 9 points or less calculated during the first 24 h after admission to the ICU had a mortality rate of 14.8%, while those with an initial MEXSOFA score of 10 points or more had a mortality rate of 40%. The MEXSOFA score at 48 h was also associated with mortality: patients with a score of 9 points or less had a mortality rate of 14.1%, while those with a score of 10 points or more had a mortality rate of 50%. In a multivariate analysis, only the MEXSOFA score at 48 h was an independent predictor for in-ICU death with an OR = 1.35 (95%CI = 1.14-1.59, P < 0.001). The SOFA and MEXSOFA scores calculated 24 h after admission to the ICU demonstrated a good level of discrimination for predicting the in-ICU mortality risk in critically ill patients. The MEXSOFA score at 48 h was an independent predictor of death; with each 1-point increase, the odds of death increased by 35%.
Resumo:
The viscoelastic properties of edible films can provide information at the structural level of the biopolymers used. The objective of this work was to test three simple models of linear viscoelastic theory (Maxwell, Generalized Maxwell with two units in parallel, and Burgers) using the results of stress relaxation tests in edible films of myofibrillar proteins of Nile Tilapia. The films were elaborated according to a casting technique and pre-conditioned at 58% relative humidity and 22ºC for 4 days. The testing sample (15mm x 118mm) was submitted to tests of stress relaxation in an equipment of physical measurements, TA.XT2i. The deformation, imposed to the sample, was 1%, guaranteeing the permanency in the domain of the linear viscoelasticity. The models were fitted to experimental data (stress x time) by nonlinear regression. The Generalized Maxwell model with two units in parallel and the Burgers model represented the relaxation curves of stress satisfactorily. The viscoelastic properties varied in a way that they were less dependent on the thickness of the films.
Resumo:
The objective of this study was to evaluate the viability of using microwave-roasted rice bran as an ingredient in high-fiber cereal bars to obtain a product with good acceptability. The influence of the rice flakes, corn flakes, and roasted rice bran levels on the physical and chemical characteristics of the cereal bars was studied. The overall acceptability of three selected formulations was also evaluated. An increase in the roasted rice bran level in the formulation reduced the force of rupture and water activity, resulted in intermediate density, and caused darkening of the bars. The contents of lipid and total dietary fiber were higher in the formulation with the highest rice bran content, which was therefore classified as functional food. The formulation containing 0.34; 0.32; and 0.34 roasted rice bran, rice flakes, and corn flakes, respectively, seemed to be the best outcome. Cereal bars with roasted rice bran levels between 10 and 20% were accepted by consumers.
Resumo:
Global warming is one of the most alarming problems of this century. Initial scepticism concerning its validity is currently dwarfed by the intensification of extreme weather events whilst the gradual arising level of anthropogenic CO2 is pointed out as its main driver. Most of the greenhouse gas (GHG) emissions come from large point sources (heat and power production and industrial processes) and the continued use of fossil fuels requires quick and effective measures to meet the world’s energy demand whilst (at least) stabilizing CO2 atmospheric levels. The framework known as Carbon Capture and Storage (CCS) – or Carbon Capture Utilization and Storage (CCUS) – comprises a portfolio of technologies applicable to large‐scale GHG sources for preventing CO2 from entering the atmosphere. Amongst them, CO2 capture and mineralisation (CCM) presents the highest potential for CO2 sequestration as the predicted carbon storage capacity (as mineral carbonates) far exceeds the estimated levels of the worldwide identified fossil fuel reserves. The work presented in this thesis aims at taking a step forward to the deployment of an energy/cost effective process for simultaneous capture and storage of CO2 in the form of thermodynamically stable and environmentally friendly solid carbonates. R&D work on the process considered here began in 2007 at Åbo Akademi University in Finland. It involves the processing of magnesium silicate minerals with recyclable ammonium salts for extraction of magnesium at ambient pressure and 400‐440⁰C, followed by aqueous precipitation of magnesium in the form of hydroxide, Mg(OH)2, and finally Mg(OH)2 carbonation in a pressurised fluidized bed reactor at ~510⁰C and ~20 bar PCO2 to produce high purity MgCO3. Rock material taken from the Hitura nickel mine, Finland, and serpentinite collected from Bragança, Portugal, were tested for magnesium extraction with both ammonium sulphate and bisulphate (AS and ABS) for determination of optimal operation parameters, primarily: reaction time, reactor type and presence of moisture. Typical efficiencies range from 50 to 80% of magnesium extraction at 350‐450⁰C. In general ABS performs better than AS showing comparable efficiencies at lower temperature and reaction times. The best experimental results so far obtained include 80% magnesium extraction with ABS at 450⁰C in a laboratory scale rotary kiln and 70% Mg(OH)2 carbonation in the PFB at 500⁰C, 20 bar CO2 pressure for 15 minutes. The extraction reaction with ammonium salts is not at all selective towards magnesium. Other elements like iron, nickel, chromium, copper, etc., are also co‐extracted. Their separation, recovery and valorisation are addressed as well and found to be of great importance. The assessment of the exergetic performance of the process was carried out using Aspen Plus® software and pinch analysis technology. The choice of fluxing agent and its recovery method have a decisive sway in the performance of the process: AS is recovered by crystallisation and in general the whole process requires more exergy (2.48–5.09 GJ/tCO2sequestered) than ABS (2.48–4.47 GJ/tCO2sequestered) when ABS is recovered by thermal decomposition. However, the corrosive nature of molten ABS and operational problems inherent to thermal regeneration of ABS prohibit this route. Regeneration of ABS through addition of H2SO4 to AS (followed by crystallisation) results in an overall negative exergy balance (mainly at the expense of low grade heat) but will flood the system with sulphates. Although the ÅA route is still energy intensive, its performance is comparable to conventional CO2 capture methods using alkanolamine solvents. An energy‐neutral process is dependent on the availability and quality of nearby waste heat and economic viability might be achieved with: magnesium extraction and carbonation levels ≥ 90%, the processing of CO2‐containing flue gases (eliminating the expensive capture step) and production of marketable products.
Resumo:
A study was undertaken' to determine the applicability of gas liquid chromatography to the simultaneous analysis of sugars and sugar phosphates from biological samples. A new method of silylation involving dimethylsulfoxide, hexamethyldisilazane, trimethylchlorosilane and cyclohexane (1:0.2:0.1:1) which rapidly silylated sugars and sugar phosphates was developed. Subsequent chromatography on a 5% SE-52 column gave good resolution of the sugar and sugar phosphate samples. Sugar phosphates decomposed during chromatography and were lost at the 7 x 10-3 ~mole level. Acidic ethanol extraction of yeast samples revealed background contamination from the yeast sample, the culture medium and the silylation reagents which would further limit the level of detection obtainable with the glc for sugars in biological samples to the 3 x 10-4 ~mole level.
Resumo:
In Canada freedom of information must be viewed in the context of governing -- how do you deal with an abundance of information while balancing a diversity of competing interests? How can you ensure people are informed enough to participate in crucial decision-making, yet willing enough to let some administrative matters be dealt with in camera without their involvement in every detail. In an age when taxpayers' coalition groups are on the rise, and the government is encouraging the establishment of Parent Council groups for schools, the issues and challenges presented by access to information and protection of privacy legislation are real ones. The province of Ontario's decision to extend freedom of information legislation to local governments does not ensure, or equate to, full public disclosure of all facts or necessarily guarantee complete public comprehension of an issue. The mere fact that local governments, like school boards, decide to collect, assemble or record some information and not to collect other information implies that a prior decision was made by "someone" on what was important to record or keep. That in itself means that not all the facts are going to be disclosed, regardless of the presence of legislation. The resulting lack of information can lead to public mistrust and lack of confidence in those who govern. This is completely contrary to the spirit of the legislation which was to provide interested members of the community with facts so that values like political accountability and trust could be ensured and meaningful criticism and input obtained on matters affecting the whole community. This thesis first reviews the historical reasons for adopting freedom of information legislation, reasons which are rooted in our parliamentary system of government. However, the same reasoning for enacting such legislation cannot be applied carte blanche to the municipal level of government in Ontario, or - ii - more specifially to the programs, policies or operations of a school board. The purpose of this thesis is to examine whether the Municipal Freedom of Information and Protection of Privacy Act, 1989 (MFIPPA) was a neccessary step to ensure greater openness from school boards. Based on a review of the Orders made by the Office of the Information and Privacy Commissioner/Ontario, it also assesses how successfully freedom of information legislation has been implemented at the municipal level of government. The Orders provide an opportunity to review what problems school boards have encountered, and what guidance the Commissioner has offered. Reference is made to a value framework as an administrative tool in critically analyzing the suitability of MFIPPA to school boards. The conclusion is drawn that MFIPPA appears to have inhibited rather than facilitated openness in local government. This may be attributed to several factors inclusive of the general uncertainty, confusion and discretion in interpreting various provisions and exemptions in the Act. Some of the uncertainty is due to the fact that an insufficient number of school board staff are familiar with the Act. The complexity of the Act and its legalistic procedures have over-formalized the processes of exchanging information. In addition there appears to be a concern among municipal officials that granting any access to information may be violating personal privacy rights of others. These concerns translate into indecision and extreme caution in responding to inquiries. The result is delay in responding to information requests and lack of uniformity in the responses given. However, the mandatory review of the legislation does afford an opportunity to address some of these problems and to make this complex Act more suitable for application to school boards. In order for the Act to function more efficiently and effectively legislative changes must be made to MFIPPA. It is important that the recommendations for improving the Act be adopted before the government extends this legislation to any other public entities.
Resumo:
Fifty-six percent of Canadians, 20 years of age and older, are inactive (Canadian Community Health Survey, 200012001). Research has indicated that one of the most dramatic declines in population physical activity occurs between adolescence and young adulthood (Melina, 2001; Stephens, Jacobs, & White, 1985), a time when individuals this age are entering or attending college or university. Colleges and universities have generally been seen as environments where physical activity and sport can be promoted and accommodated as a result of the available resources and facilities (Archer, Probert, & Gagne, 1987; Suminski, Petosa, Utter, & Zhang, 2002). Intramural sports, one of the most common campus recreational sports options available for post-secondary students, enable students to participate in activities that are suited for different levels of ability and interest (Lewis, Jones, Lamke, & Dunn, 1998). While intramural sports can positively affect the physical activity levels and sport participation rates of post-secondary students, their true value lies in their ability to encourage sport participation after school ends and during the post-school lives of graduates (Forrester, Ross, Geary, & Hall, 2007). This study used the Sport Commitment Model (Scanlan et aI., 1993a) and the Theory of Planned Behaviour (Ajzen, 1991) with post secondary intramural volleyball participants in an effort to examine students' commitment to intramural sport and 1 intentions to participate in intramural sports. More specifically, the research objectives of this study were to: (1.) test the Sport Commitment Model with a sample of postsecondary intramural sport participants(2.) determine the utility of the sixth construct, social support, in explaining the sport commitment of post-secondary intramural sport participants; (3.) determine if there are any significant differences in the six constructs of IV the SCM and sport commitment between: gender, level of competition (competitive A vs. B), and number of different intramural sports played; (4.) determine if there are any significant differences between sport commitment levels and constructs from the Theory of Planned Behaviour (attitudes, subjective norms, perceived behavioural control, and intentions); (5.) determine the relationship between sport commitment and intention to continue participation in intramural volleyball, continue participating in intramurals and continuing participating in sport and physical activity after graduation; and (6.) determine if the level of sport commitment changes the relationship between the constructs from the Theory of Planned Behaviour. Of the 318 surveys distributed, there were 302 partiCipants who completed a usable survey from the sample of post-secondary intramural sport participants. There was a fairly even split of males and females; the average age of the students was twenty-one; 90% were undergraduate students; for approximately 25% of the students, volleyball was the only intramural sport they participated in at Brock and most were part of the volleyball competitive B division. Based on the post-secondary students responses, there are indications of intent to continue participation in sport and physical activity. The participation of the students is predominantly influenced by subjective norms, high sport commitment, and high sport enjoyment. This implies students expect, intend and want to 1 participate in intramurals in the future, they are very dedicated to playing on an intramural team and would be willing to do a lot to keep playing and students want to participate when they perceive their pursuits as enjoyable and fun, and it makes them happy. These are key areas that should be targeted and pursued by sport practitioners.
Resumo:
Rapport de recherche