Predictors of knowledge creation performance. A quantitative qualitative comparative study of European doctorandi

Aquesta tesi forma part d'un projecte destinat a predir el rendiment acadèmic dels estudiants de doctorat portat a terme per l'INSOC (International Network on Social Capital and Performance). El grup de recerca INSOC està format per les universitats de Girona (Espanya), Ljubljana (Eslovènia), Giessen (Alemanya) i Ghent (Bèlgica). El primer objectiu d'aquesta tesi és desenvolupar anàlisis quantitatius comparatius sobre el rendiment acadèmic dels estudiants de doctorat entre Espanya, Eslovènia i Alemanya a partir dels resultats individuals del rendiment acadèmic obtinguts de cada una de les universitats. La naturalesa internacional del grup de recerca implica la recerca comparativa. Vam utilitzar variables personal, actitudinals i de xarxa per predir el rendiment. El segon objectiu d'aquesta tesi és entendre de manera qualitativa perquè les variables de xarxa no ajuden quantitativament a predir el rendiment a la universitat de Girona (Espanya). En el capítol 1, definim conceptes relacionats amb el rendiment i donam un llistat de cada una de les variables independents (variables de xarxa, personals i actitudinals), resumint la lliteratura. Finalment, explicam com s'organitzen els estudis de doctorat a cada un dels diferents països. A partir d'aquestes definicions teòriques, en els pròxims capítols, primer presentarem els qüestionaris utilitzats a Espanya, Eslovènia i Alemanya per mesurar aquests diferents tipus de variables. Després, compararem les variables que són relevants per predir el rendiment dels estudiants de doctorat a cada país. Després d'això, fixarem diferents models de regressió per predir el rendiment entre països. En tots aquests models les variables de xarxa fallen a predir el rendiment a la Universitat de Girona. Finalment, utilitzem estudis qualitatius per entendre aquests resultats inesperats. En el capítol 2, expliquem com hem dissenyat i conduït els qüestionaris en els diferents països amb l'objectiu d'explicar el rendiment dels estudiants de doctorat obtinguts a Espanya, Eslovènia i Alemanya. En el capítol 3, cream indicadors comparables però apareixen problemes de comparabilitat en preguntes particulars a Espanya, Eslovènia i Alemanya. En aquest capítol expliquem com utilitzem les variables dels tres països per crear indicadors comparables. Aquest pas és molt important perquè el principal objectiu del grup de recerca INSOC és comparar el rendiment dels estudiants de doctorat entre els diferents països. En el capítol 4 comparem models de regressió obtinguts de predir el rendiment dels estudiants de doctorat a les universitats de Girona (Espanya) i Eslovènia. Les variables són característiques dels grups de recerca dels estudiants de doctorat enteses com una xarxa social egocèntrica, característiques personals i actitudinals dels estudiants de doctorat i algunes carecterístiques dels directors. Vam trobar que les variables de xarxa egocèntriques no predien el rendiment a la Universitat de Girona. En el capítol 5, comparem dades eslovenes, espanyoles i alemnayes, seguint la metodologia del capítol 4. Concluïm que el cas alemany és molt diferent. El poder predictiu de les variables de xarxa no millora. En el capítol 6 el grup de recerca dels estudiants de doctorat és entès com una xarxa duocèntrica (Coromina et al., 2008), amb l'objectiu d'obtendre informació de la relació mútua entre els estudiants i els seus directors i els contactes d'ambdós amb els altres de la xarxa. La inclusió de la xarxa duocèntrica no millora el poder predictiu del model de regressió utilitzant les variales egocèntriques de xarxa. El capítol 7 pretèn entendre perquè les variables de xarxa no predeixen el rendiment a la Universitat de Girona. Utilitzem el mètode mixte, esperant que l'estudi qualitatiu pugui cobrir les raons de perquè la qualitat de la xarxa falla en la qualitat del treball dels estudiants. Per recollir dades per l'estudi qualitatiu utilitzem entrevistes en profunditat.

Innovation, entrepreneurship and outsourcing: essays on the use of knowledge in business environments

Innovació, emprenedoria i subcontractació són els pilars temàtics de la present tesi doctoral. L'ús del coneixement per part de les empreses representa l'element comú d'aquestes temàtiques. Les evidències empíriques provenen principalment del món empresarial, però es complementen amb les del món acadèmic com a principal proveïdor de coneixement a la societat actual, la finalitat de la qual és crear riquesa i benestar socioeconòmic. L'objectiu principal d'aquesta tesi doctoral és contribuir a les diferents àrees de recerca. La primera, gestió de la innovació, més concretament innovació organitzativa, reflexionant sobre la seva importància i monitorització a través d'enquestes. Tot seguit, un exemple d'innovació organitzativa -treball en equip- s'analitza en profunditat, així com també els seus determinants. La segona, analitza el procés de transició d'una universitat tradicional cap a una universitat emprenedora, començant per la fase de disseny fins a l'actualitat contemplant la seva funcionalitat i eficiència en el marc de les institucions públiques de recerca d'Europa. I la tercera, descriu les barreres que les empreses han de fer front a l'hora de cooperar, en general, i amb universitats, en particular. La mateixa mostra d'empreses gasela també serveix per analitzar la decisió de fer-o-comprar. El resum d'aquests resultats, les conclusions, així com les futures línies de recerca finalitzen el treball.

Integration of knowledge-based, qualitative and numeric tools for real time dynamic systems supervision

The proposal presented in this thesis is to provide designers of knowledge based supervisory systems of dynamic systems with a framework to facilitate their tasks avoiding interface problems among tools, data flow and management. The approach is thought to be useful to both control and process engineers in assisting their tasks. The use of AI technologies to diagnose and perform control loops and, of course, assist process supervisory tasks such as fault detection and diagnose, are in the scope of this work. Special effort has been put in integration of tools for assisting expert supervisory systems design. With this aim the experience of Computer Aided Control Systems Design (CACSD) frameworks have been analysed and used to design a Computer Aided Supervisory Systems (CASSD) framework. In this sense, some basic facilities are required to be available in this proposed framework: ·

How could construction supply chain benefit from RFID/GPS integration: a knowledge management perspective

Construction materials and equipment are essential building blocks of every construction project and may account for 50-60 per cent of the total cost of construction. The rate of their utilization, on the other hand, is the element that most directly relates to a project progress. A growing concern in the industry that inadequate efficiency hinders its success could thus be accommodated by turning construction into a logistic process. Although mostly limited, recent attempts and studies show that Radio Frequency IDentification (RFID) applications have significant potentials in construction. However, the aim of this research is to show that the technology itself should not only be used for automation and tracking to overcome the supply chain complexity but also as a tool to generate, record and exchange process-related knowledge among the supply chain stakeholders. This would enable all involved parties to identify and understand consequences of any forthcoming difficulties and react accordingly before they cause major disruptions in the construction process. In order to achieve this aim the study focuses on a number of methods. First of all it develops a generic understanding of how RFID technology has been used in logistic processes in industrial supply chain management. Secondly, it investigates recent applications of RFID as an information and communication technology support facility in construction logistics for the management of construction supply chain. Based on these the study develops an improved concept of a construction logistics architecture that explicitly relies on integrating RFID with the Global Positioning System (GPS). The developed conceptual model architecture shows that categorisation provided through RFID and traceability as a result of RFID/GPS integration could be used as a tool to identify, record and share potential problems and thus vastly improve knowledge management processes within the entire supply chain. The findings thus clearly show a need for future research in this area.

Comparing rice production systems: A challenge for agronomic research and for the dissemination of knowledge-intensive farming practices

This article is a commentary on several research studies conducted on the prospects for aerobic rice production systems that aim at reducing the demand for irrigation water which in certain major rice producing areas of the world is becoming increasingly scarce. The research studies considered, as reported in published articles mainly under the aegis of the International Rice Research Institute (IRRI), have a narrow scope in that they test only 3 or 4 rice varieties under different soil moisture treatments obtained with controlled irrigation, but with other agronomic factors of production held as constant. Consequently, these studies do not permit an assessment of the interactions among agronomic factors that will be of critical significance to the performance of any production system. Varying the production factor of "water" will seriously affect also the levels of the other factors required to optimise the performance of a production system. The major weakness in the studies analysed in this article originates from not taking account of the interactions between experimental and non-experimental factors involved in the comparisons between different production systems. This applies to the experimental field design used for the research studies as well as to the subsequent statistical analyses of the results. The existence of such interactions is a serious complicating element that makes meaningful comparisons between different crop production systems difficult. Consequently, the data and conclusions drawn from such research readily become biased towards proposing standardised solutions for possible introduction to farmers through a linear technology transfer process. Yet, the variability and diversity encountered in the real-world farming environment demand more flexible solutions and approaches in the dissemination of knowledge-intensive production practices through "experiential learning" types of processes, such as those employed by farmer field schools. This article illustrates, based on expertise of the 'system of rice intensification' (SRI), that several cost-effective and environment-friendly agronomic solutions to reduce the demand for irrigation water, other than the asserted need for the introduction of new cultivars, are feasible. Further, these agronomic Solutions can offer immediate benefits of reduced water requirements and increased net returns that Would be readily accessible to a wide range of rice producers, particularly the resource poor smallholders. (C) 2009 Elsevier B.V. All rights reserved.

Lean construction: Arenas of enactment, models of diffusion and the meaning of 'leanness'

The existing literature on lean construction is overwhelmingly prescriptive with little recognition of the social and politicised nature of the diffusion process. The prevailing production-engineering perspective too often assumes that organizations are unitary entities where all parties strive for the common goal of 'improved performance'. An alternative perspective is developed that considers the diffusion of lean construction across contested pluralistic arenas. Different actors mobilize different storylines to suit their own localized political agendas. Multiple storylines of lean construction continuously compete for attention with other management fashions. The conceptualization and enactment of lean construction therefore differs across contexts, often taking on different manifestations from those envisaged. However, such localized enactments of lean construction are patterned and conditioned by pre-existing social and economic structures over which individual managers have limited influence. Taking a broader view, 'leanness' can be conceptualized in terms of a quest for structural flexibility involving restructuring, downsizing and outsourcing. From this perspective, the UK construction industry can be seen to have embarked upon leaner ways of working in the mid-1970s, long before the terminology of lean thinking came into vogue. Semi-structured interviews with construction sector policy-makers provide empirical support for the view that lean construction is a multifaceted concept that defies universal definition.

Assessing the process of knowledge transfer – An empirical study

This paper investigates and evaluates the process of knowledge transfer in construction projects. Due to the highly competitive nature of business environments, knowledge transfer between organisations has become increasingly popular in recent years. However, although organisations can realise remarkable benefits by transferring knowledge from one unit to another, successful knowledge transfer can be difficult to achieve. The discussions presented in the paper are mainly based on findings of two case studies. The two cases were selected from Private Finance Initiative (PFI) projects in the UK. According to the case study findings, different stages of a knowledge transfer process can be overlapped, omitted, repeated as well as intermitted and then restarted. One of the significant findings of the case studies was the role of the "knowledge mediator". In selected case studies, there were external consultants and expert staff in the form of knowledge mediators. The importance of their roles was frequently highlighted by the interview participants. They were not only facilitating the close liaison between the knowledge source and the receiver, but also their role was strongly associated with practices of translation and interpretation. This combined role of mediator/translator, therefore, appears to be particularly significant for inter-organisational knowledge transfer in PFI projects.

Role of knowledge in managing construction change

Purpose-Unplanned changes in construction projects are common and lead to disruptive effects such as project delays, cost overruns and quality deviations. Rework due to unplanned changes can cost 10-15 per cent of contract value. By managing these changes more effectively, these disruptive effects can be minimised. Previous research has approached this problem from an information-processing view. In this knowledge age, the purpose of this paper is to argue that effective change management can be brought about by better understanding the significant role of knowledge during change situations. Design/methodology/approach - Within this knowledge-based context, the question of how construction project teams manage knowledge during unplanned change in the construction phase within collaborative team settings is investigated through a selected case study sample within the UK construction industry. Findings- Case study findings conclude that different forms of knowledge are created and shared between project team members during change events which is very much socially constructed and centred on tacit knowledge and experience of project personnel. Originality/value- Building on the case study findings the paper finally offers a model that represents the role of knowledge during managing project change.

Technology sourcing, knowledge management and governance in international inter-organizational innovation networks

This conceptual paper aims to improve our understanding of how internationalised firms use outsourcing and offshoring strategies to manage knowledge and information through the life-cycle of integrated product-service solutions. More precisely, we identify the appropriate theoretical framework for this analysis and investigate through in-depth case studies how UK engineering firms organise, coordinate, and incentivise work that is executed in globally distributed teams. Our research focuses on their UK and India offices to study the organisation and governance of distributed teams. The research has several theoretical dimensions - organization; geography; time and knowledge - that it addresses as boundary challenges.