Firms and aggregate dynamics

We investigate the role of permanent and transitory shocks for firms and aggregate dynamics. We find that permanent shocks to productivity and permanent shifts in the composition of output explain at least four-fifths of firms’ dynamics. However, these permanent shocks are almost uncorrelated across firms and are therefore less relevant for aggregate dynamics. Transitory shocks, on the other hand, are not very important at the firm level,but they account for most of the volatility of aggregate hours and output, because they are significantly correlated across firms. Finally, we try to make some progress on the interpretation of the shocks.

Barriers preventing the successful integration of mental health services into Primary Health Care in Nigeria : a mixed methods approach

RESUMO: A Nigéria tem uma população estimada em cerca de 170 milhões de pessoas. O número de profissionais de saúde mental é muito diminuto, contando apenas com 150 psiquiatras o que perfaz aproximadamente um rácio de psiquiatra: população de mais de 1:1 milhão de pessoas. O Plano Nacional de Saúde Mental de 1991 reconheceu esta insuficiência e recomendou a integração dos serviços de saúde mental nos cuidados de saúde primários (CSP). Depois de mais de duas décadas, essa política não foi ainda implementada. Este estudo teve como objetivos mapear a estrutura organizacional dos serviços de saúde mental da Nigéria, e explorar os desafios e barreiras que impedem a integração bem-sucedida dos serviços de saúde mental nos cuidados de saúde primários, isto segundo a perspectiva dos profissionais dos cuidados de saúde primários. Com este objetivo, desenvolveu-se um estudo exploratório sequencial e utilizou-se um modelo misto para a recolha de dados. A aplicação em simultâneo de abordagens qualitativas e quantitativas permitiram compreender os problemas relacionados com a integração dos serviços de saúde mental nos CSP na Nigéria. No estudo qualitativo inicial, foram realizadas entrevistas com listagens abertas a 30 profissionais dos CSP, seguidas de dois grupos focais com profissionais dos CSP de duas zonas governamentais do estado de Oyo de forma a obter uma visão global das perspectivas destes profissionais locais sobre os desafios e barreiras que impedem uma integração bem-sucedida dos serviços de saúde mental nos CSP. Subsequentemente, foram realizadas entrevistas com quatro pessoas-chave, especificamente coordenadores e especialistas em saúde mental. Os resultados do estudo qualitativo foram utilizados para desenvolver um questionário para análise quantitativa das opiniões de uma amostra maior e mais representativa dos profissionais dos CSP do Estado de Oyo, bem como de duas zonas governamentais locais do Estado de Osun. As barreiras mais comummente identificadas a partir deste estudo incluem o estigma e os preconceitos sobre a doença mental, a formação inadequada dos profissionais dos CPS sobre saúde mental, a perceção pela equipa dos CSP de baixa prioridade de ação do Governo, o medo da agressão e violência pela equipa dos CSP, bem como a falta de disponibilidade de fármacos. As recomendações para superar estes desafios incluem a melhoria sustentada dos esforços da advocacia à saúde mental que vise uma maior valorização e apoio governamental, a formação e treino organizados dos profissionais dos cuidados primários, a criação de redes de referência e de apoio com instituições terciárias adjacentes, e o engajamento da comunidade para melhorar o acesso aos serviços e à reabilitação, pelas pessoas com doença mental. Estes resultados fornecem indicações úteis sobre a perceção das barreiras para a integração bem sucedida dos serviços de saúde mental nos CSP, enquanto se recomenda uma abordagem holística e abrangente. Esta informação pode orientar as futuras tentativas de implementação da integração dos serviços de saúde mental nos cuidados primários na Nigéria.------------ABSTRACT: Nigeria has an estimated population of about 170 million people but the number of mental health professionals is very small, with about 150 psychiatrists. This roughly translates to a psychiatrist:population ratio of more than 1:1 million people. The National Mental Health Policy of 1991 recognized this deficiency and recommended the integration of mental health into primary health care (PHC) delivery system. After more than two decades, this policy has yet to be implemented. This study aimed to map out the organizational structure of the mental health systems in Nigeria, and to explore the challenges and barriers preventing the successful integration of mental health into primary health care, from the perspective of the primary health care workers. A mixed methods exploratory sequential study design was employed, which entails the use of sequential timing in the combined methods of data collection. A combination of qualitative and uantitative approaches in sequence, were utilized to understand the problems of mental health services integration into PHC in Nigeria. The initial qualitative phase utilized free listing interviews with 30 PHC workers, followed by two focus group discussions with primary care workers from two Local Government Areas (LGA) of Oyo State to gain useful insight into the local perspectives of PHC workers about the challenges and barriers preventing successful integration of mental health care services into PHC. Subsequently, 4 key informant interviews with PHC co-ordinators and mental health experts were carried out. The findings from the qualitative study were utilized to develop a quantitative study questionnaire to understand the opinions of a larger and more representative sample of PHC staff in two more LGAs of Oyo State, as well as 2 LGAs from Osun State. The common barriers identified from this study include stigma and misconceptions about mental illness, inadequate training of PHC staff about mental health, low government priority, fear of aggression and violence by the PHC staff, as well as non-availability of medications. Recommendations for overcoming these challenges include improved and sustained efforts at mental health advocacy to gain governmental attention and support, organized training and retraining for primary care staff, establishment of referral and supportive networks with neighbouring tertiary facilities and community engagement to improve service utilization and rehabilitation of mentally ill persons. These findings provide useful insight into the barriers to the successful integration of mental health into PHC, while recommending a holistic and comprehensive approach. This information can guide future attempts to implement the integration of mental health into primary care in Nigeria.

Synergistic interactions in mixed-species biofilms of pathogenic bacteria from the respiratory tract

IntroductionMixed-species biofilms are involved in a wide variety of infections. We studied the synergistic interactions during dual-species biofilm formation among isolates of Pseudomonas aeruginosa, Acinetobacter baumannii, and Stenotrophomonas maltophilia.MethodsIsolates were cultured as single-species and all possible combinations of dual-species biofilms.ResultsThe 61 A. baumannii biofilms increased by 26-fold when cultured with S. maltophilia isolates; 62 A. baumannii biofilms increased by 20-fold when cultured with S. maltophilia isolates; and 31 P. aeruginosa biofilms increased by 102-fold when cultured with S. maltophilia 106.ConclusionsSynergy was observed between two isolates, including those that inherently lacked biofilm formation ability.

Impact of carbon/nitrogen feeding strategy on polyhydroxyalkanoates production using mixed microbial cultures

Polyhydroxyalkanoates (PHA) production using mixed microbial cultures (MMC) requires a multi-stage process involving the microbial selection of PHA-storing microorganisms, typically operated in sequencing batch reactors (SBR), and an accumulation reactor. Since low-cost renewable feedstocks used as process feedstock are often nitrogen-deficient, nutrient supply in the selection stage is required to allow for microbial growth. In this context, the possibility to uncouple nitrogen supply from carbon feeding within the SBR cycle has been investigated in this study. Moreover, three different COD:N ratios (100:3.79, 100:3.03 and 100:2.43) were tested in three different runs which also allowed the study of COD:N ratio on the SBR performance. For each run, a synthetic mixture of acetic and propionic acids at an overall organic load rate of 8.5 gCOD L-1 d-1 was used as carbon feedstock, whereas ammonium sulfate was the nitrogen source in a lab-scale sequence batch reactor (SBR) with 1 L of working volume. Besides, a sludge retention time (SRT) of 1 d was used as well as a 6 h cycle length. The uncoupled feeding strategy significantly enhanced the selective pressure towards PHA-storing microorganisms, resulting in a two-fold increase in the PHA production (up to about 1.3 gCOD L-1). A high storage response was observed for the two runs with the COD:N ratios (gCOD:gN) of 100:3.79 and 100:3.03, whereas the lowest investigated nitrogen load resulted in very poor performance in terms of polymer production. In fact, strong nitrogen limitation caused fungi to grow and a very poor storage ability by microorganisms that thrived in those conditions. The COD:N ratio also affected the polymer composition, indeed the produced poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) showed a variable HV content (1-20 %, w/w) among the three runs, lessening as the COD:N increased. This clearly suggests the possibility to use the COD:N ratio as a tool for tuning polymer properties regardless the composition of the feedstock.

Polyhydroxyalkanoates production by photosynthetic mixed cultures

Polyhydroxyalkanoates (PHAs) are natural biologically synthesized polymers that have been the subject of much interest in the last decades due to their biodegradability. Thus far, its microbial production is associated with high operational costs, which increases PHA prices and limits its marketability. To address this situation, this thesis’ work proposes the utilization of photosynthetic mixed cultures (PMC) as a new PHA production system that may lead to a reduction in operational costs. In fact, the operational strategies developed in this work led to the selection of PHA accumulating PMCs that, unlike the traditional mixed microbial cultures, do not require aeration, thus permitting savings in this significant operational cost. In particular, the first PHA accumulating PMC tested in this work was selected under non-aerated illuminated conditions in a feast and famine regime, being obtained a consortium of bacteria and algae, where photosynthetic bacteria accumulated PHA during the feast phase and consumed it for growth during the famine phase, using the oxygen produced by algae. In this symbiotic system, a maximum PHA content of 20% cell dry weight (cdw) was reached, proving for the first time, the capacity of a PMC to accumulate PHA. During adaptation to dark/light alternating conditions, the culture decreased its algae content but maintained its viability, achieving a PHA content of 30% cdw. Also, the PMC was found to be able to utilize different volatile fatty acids for PHA production, accumulating up to 20% cdw of a PHA co-polymer composed of 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (HV) monomers. Finally, a new selective approach for the enrichment of PMCs in PHA accumulating bacteria was tested. Instead of imposing a feast and famine regime, a permanent feast regime was used, thus selecting a PMC that was capable of simultaneously growing and accumulating PHA, being attained a maximum PHA content of 60% cdw, the highest value reported for a PMC thus far. The results presented in this thesis prospect the utilization of cheap, VFA-rich fermented wastes as substrates for PHA production, which combined with this new photosynthetic technology opens up the possibility for direct sunlight illumination, leading to a more cost-effective and environmentally sustainable PHA production process.

The mixed impact of design thinking on business collaborations

The present work project investigates the implications of design thinking on an interbusiness collaborative project, unveiling both the benefits and fragilities that derive from the use of such methodology within the mentioned context. The study is organized in two parts. The first one starts with a literature review on the two relevant frames of reference – design thinking and business collaboration. It proceeds to the creation of a conceptual framework to assess the potential value of the design-based approach. The second part focuses on the practical application of to the newly developed instrument to the inTRAIN project – R&D for railway interiors.

Lightweight concrete masonry units based on processed granulate of corn cob as aggregate

A research work was performed in order to assess the potential application of processed granulate of corn cob (PCC) as an alternative lightweight aggregate for the manufacturing process of lightweight concrete masonry units (CMU). Therefore, CMU-PCC were prepared in a factory using a typical lightweight concrete mixture for non-structural purposes. Additionally, lightweight concrete masonry units based on a currently applied lightweight aggregate such as expanded clay (CMU-EC) were also manufactured. An experimental work allowed achieving a set of results that suggest that the proposed building product presents interesting material properties within the masonry wall context. Therefore, this unit is promising for both interior and exterior applications. This conclusion is even more relevant considering that corn cob is an agricultural waste product.

Non emergency patients transport - a mixed integer linear programming

This work presents a model and a heuristic to solve the non-emergency patients transport (NEPT) service issues given the new rules recently established in Portugal. The model follows the same principle of the Team Orienteering Problem by selecting the patients to be included in the routes attending the maximum reduction in costs when compared with individual transportation. This model establishes the best sets of patients to be transported together. The model was implemented in AMPL and a compact formulation was solved using NEOS Server. A heuristic procedure based on iteratively solving problems with one vehicle was presented, and this heuristic provides good results in terms of accuracy and computation time.

Assessing the feasibility of impregnating phase change materials in lightweight aggregate for development of thermal energy storage systems

This paper assesses the feasibility of impregnation/encasement of phase change materials (PCMs) in lightweight aggregates (LWAs). An impregnation process was adopted to carry out the encasement study of two different PCMs in four different LWAs. The leakage of the impregnated/encased PCMs was studied when they were submitted to freeze/thawing and oven drying tests, separately. The results confirmed that, the impregnation/encasement method is effective with respect to the large thermal energy storage density, and can be suitable for applications were PCMs cannot be incorporated directly such as asphalt road pavements.

Recycled asphalt mixtures produced with high percentage of different waste materials

The use of sustainable solutions in construction is not just an option, but is increasingly becoming a need of the Society. Thus, nowadays the recycling of waste materials is a growing technology that needs to be continuously improved, namely by researching new solutions for waste valorisation and by increasing the amount of wastes reused. In the paving industry, the reuse of reclaimed asphalt (RA) is becoming common practice, but needs further research work. Thus, this study aims to increase the incorporation of RA and other waste materials in the production of recycled asphalt mixtures in order to improve their mechanical, environmental and economic performance. Recycled mixtures with 50% RA were analysed in this study, including: i) RA selection, preparation and characterization; ii) incorporation of other waste materials as binder additives or modifiers, like used motor oil (UMO) and waste high density polyethylene (HDPE); iii) production of different mixtures (without additives; with UMO; with UMO and HDPE) and comparison of their performance in order to assess the main advantages of each solution. With this study it was concluded that up to 7.5 % of UMO and 4.0 % of HDPE can be used in a new modified binder for asphalt mixtures with 50 % of RA, which have excellent properties concerning the rutting with WTS = 0.02 mm/103 cycles, the fatigue resistance with ε6 = 160.4, and water sensitivity with an ITSR of 81.9 %.

Thin panels of cement composites reinforced with recycled fibres for the shear strengthening of reinforced concrete elements

A new technique was developed for producing thin panels of a cement based material reinforced with relatively high content of steel fibres originated from the industry of tyre recycling. Flexural tests with notched and un-notched specimens were carried out to characterize the mechanical properties of this Fibre Reinforced Cement Composite (FRCC) and the results are presented and discussed. The values of the fracture mode I parameters of the developed FRCC were determined by performing inverse analysis with test results obtained in three point notched beam bending tests. To appraise the potentialities of these FRCC panels for the increase of the shear capacity of reinforced (RC) beams, numerical research was performed on the use of developed FRCC panel for shear reinforcement by applying the panels in the lateral faces of RC beams deficiently reinforced in shear.

Recycled steel fibre reinforced concrete failing in bending and in shear

Recent research is showing that the addition of Recycled Steel Fibres (RSF) from wasted tyres can decrease significantly the brittle behaviour of cement based materials, by improving its toughness and post-cracking resistance. In this sense, Recycled Steel Fibre Reinforced Concrete (RSFRC) seems to have the potential to constitute a sustainable material for structural and non-structural applications. To assess this potential, experimental and numerical research was performed on the use of RSFRC in elements failing in bending and in beams failing in shear. The values of the fracture mode I parameters of the developed RSFRC were determined by performing inverse analysis with test results obtained in three point notched beam bending tests. To assess the possibility of using RSF as shear reinforcement in Reinforced Concrete (RC) beams, three point bending tests were executed with three series of RSFRC beams flexurally reinforced with a relatively high reinforcement ratio of longitudinal steel bars in order to assure shear failure for all the tested beams. By performing material nonlinear simulations with a computer program based on the finite element method (FEM), the applicability of the fracture mode I crack constitutive law derived from the inverse analysis is assessed for the prediction of the behaviour of these beams. The performance of the formulation proposed by RILEM TC 162 TDF and CEB-FIP 2010 for the prediction of the shear resistance of fibre reinforced concrete elements was also evaluated.

Recycled asphalt mixtures with foamed bitumen: an alternative to build ecofriendly road pavements

Nowadays, recycling has become a very important objective for the society in the scope of a closed loop product life cycle. In recent years, new recycling techniques have been developed in the area of road pavements that allow the incorporation of high percentages of reclaimed asphalt (RA) materials in recycled asphalt mixtures. The use of foamed bitumen for production of recycled asphalt mixtures is one of those techniques, which also allows the reduction of the mixing temperatures (warm mix technology). However, it is important to evaluate if this solution can maintain or improve the performance of the resulting mixtures. Thus, the main aim of the present study is to assess the performance of warm recycled asphalt mixtures incorporating foamed bitumen as the new binder and 50% RA, in comparison with a control mixture using conventional bitumen. Four mixtures have been produced with 50% RA, one of them at typical high mixing temperatures with a conventional bitumen (control mixture) and the other three with foamed bitumen at different production temperatures. These four mixtures were tested to evaluate their compactability and water sensitivity. The laboratory test results showed that the production of recycled mixtures with foamed bitumen can be reduced by 40ºC without changing the performance of the resulting mixtures.

Plastic waste use as aggregate and binder modifier in open-graded asphalts

Road pavements are very important infrastructures for the Society, but they can cause serious environmental impacts during construction, operation and rehabilitation phases. Thus, it is essential to develop surface paving solutions that promote not only the durability but also a comfortable and safe use. In fact, this work aims to study the properties of new opengraded mixtures for surface layers produced with plastic wastes. First, HDPE and EVA wastes were used as bitumen modifiers, and then another plastic waste (PEX) replaced part of the aggregates. After studying the modified binders, the open-graded mixtures were designed, and then they were tested concerning their particle loss, rutting resistance, surface texture and damping effect. It was concluded that both ways of using the plastic wastes can improve the mechanical and functional properties of the open-graded mixtures related to the pavement performance.

A mechanical analysis of asphalt recycled mixtures produced with high recycling rates

In this work four asphalt mixtures were compared in terms of mechanical characteristics. One of the mixtures (control mixture) was used as a reference to the study of three mixtures produced with reclaimed asphalt pavement (RAP). One of the recycled mixtures incorporated 30% of RAP and the other two were produced with 50% of RAP. The effect of using a rejuvenator additive (3% rejuvenator) was also evaluated in one of the mixtures with 50% of RAP.