The energetic cost of maintenance in ruminants: From classical to new concepts and prediction systems

The cost of maintenance makes up a large part of total energy costs in ruminants. Metabolizable energy (ME) requirement for maintenance (MEm) is the daily ME intake that exactly balances heat energy (HE). The net energy requirement for maintenance (NEm) is estimated subtracting MEm from the HE produced by the processing of the diet. Men cannot be directly measured experimentally and is estimated by measuring basal metabolism in fasted animals or by regression measuring the recovered energy in fed animals. MEm and NEm usually, but not always, are expressed in terms of BW0.75. However, this scaling factor is substantially empirical and its exponent is often inadequate, especially for growing animals. MEm estimated by different feeding systems (AFRC, CNCPS, CSIRO, INRA, NRC) were compared by using dairy cattle data. The comparison showed that these systems differ in the approaches used to estimate MEm and for its quantification. The CSIRO system estimated the highest MEm, mostly because it includes a correction factor to increase ME as the feeding level increases. Relative to CSIRO estimates, those of NRC, INRA, CNCPS, and AFRC were on average 0.92, 0.86, 0.84, and 0.78, respectively. MEm is affected by the previous nutritional history of the animals. This phenomenon is best predicted by dynamic models, of which several have been published in the last decades. They are based either on energy flows or on nutrient flows. Some of the different approaches used were described and discussed.

Aspectos nutricionais de farinhas de vísceras de aves e sua utilização em rações de frangos de corte

In the process of slaughtering chickens, parts of them are discarded because are unfit for human consumption. These wastes should be directed to a destination that does not promote any risk to the environment and above all, according with the laws regulating waste disposal. So, the wastes are transformed into byproducts for utilization in the animal nutrition, poultry and swine feeding, but cannot use for ruminant feed, only non-ruminant feeding. In Brazil, the first scientific studies on the use of by-products of poultry slaughter as a protein source in diets for broiler chickens were started in the 1960's, and these results were used for a long time for food formulation, but the need to improve the herds stimulated the search for improvement in technologies for more accurate diet formulations. The objective of this article is to review some aspects of the physic-chemical composition, energy values and their use in diets for broilers.

Consumo, digestibilidade aparente e balanço de nitrogênio em ovelhas alimentadas com diferentes níveis de fibra em detergente neutro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desempenho e morfometria duodenal de frangos de corte submetidos a diferentes níveis de energia e programas de alimentação de 42 a 57 dias de idade

This experiment was conducted to evaluate the use of different energy levels and amino acid recommendations on performance, carcass yield and intestinal morphometry of broilers from 42 to 57 days of age. We used 1,600 one-day old male broilers (Cobb 500) in a completely randomized design arranged in a 2x4 factorial scheme with 3,200 and 3,600 kcal ME/kg and four different feed programs. The metabolizable energy levels and the feed programs did not determine significant differences in carcass characteristics for choosing a level of energy or a feed program, thus the energy level and the recommendations of amino acids that determine the highest cost-benefit ratio should prevail. It was observed that 3,600 kcal ME/kg resulted in some improvement on performance and morphometry of the intestinal mucosa, also the fractioning of digestible amino acid requirements during two periods resulted in worse performance and intestinal villi height.

Thermal stability of ionene polymers

Two different cationic polymers of the same chemical type and with very similar chemical structures were reacted with a natural bentonite over a wide range of polymer/clay ratios. This study involved the synthesis of cationic aliphatic ammonium polyionenes, specifically 3,6-ionene and 3,6-dodecylionene. Ionenes are ion-containing polymers that contain quaternary nitrogen atoms in the main macromolecular chain as opposed to a pendant chain. The CHN content, basal spacing, and elemental composition of each of the polymer-clay complexes were analyzed by X-ray diffraction, X-ray fluorescence, and thermogravimetry. All the polycations reacted to form interlayer complexes with clay, which displaced more Na+ and little Ca2+. Sodium and calcium were both present as interlayer cations in the clay and its complexes. The TG/DTG curves show that both polymers underwent thermal degradation in more than one stage. Specifically, 3,6-ionene was found to undergo two stages of decomposition and 3,6-dodecylionene undergo three stages. The behavior of the TG/DTG curves and the activation energy values suggest that 3,6-dodecylionene (E = 174,85 kJ mol-1) complexes have greater thermal stability than 3,6-ionene (E = 115,52 kJ mol-1) complexes. The mechanism of degradation suggests a direct interaction with the dodecyl chain containing 12 carbons, which are present in 3,6-dodecylionene but not in 3,6-ionene. © 2012 Akadémiai Kiadó, Budapest, Hungary.

Effect of pectin extracted from citrus pulp on digesta characteristics and nutrient digestibility in broilers chickens

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Optical, mechanical and surface properties of amorphous carbonaceous thin films obtained by plasma enhanced chemical vapor deposition and plasma immersion ion implantation and deposition

Diverse amorphous hydrogenated carbon-based films (a-C:H, a-C:H:F, a-C:H:N, a-C:H:Cl and a-C:H:Si:O) were obtained by radiofrequency plasma enhanced chemical vapor deposition (PECVD) and plasma immersion ion implantation and deposition (PIIID). The same precursors were used in the production of each pair of each type of film, such as a-C:H, using both PECVD and PIIID. Optical properties, namely the refractive index, n, absorption coefficient, α, and optical gap, ETauc, of these films were obtained via transmission spectra in the ultraviolet-visible near-infrared range (wavelengths from 300 to 3300 nm). Film hardness, elastic modulus and stiffness were obtained as a function of depth using nano-indentation. Surface energy values were calculated from liquid drop contact angle data. Film roughness and morphology were assessed using atomic force microscopy (AFM). The PIIID films were usually thinner and possessed higher refractive indices than the PECVD films. Determined refractive indices are consistent with literature values for similar types of films. Values of ETauc were increased in the PIIID films compared to the PECVD films. An exception was the a-C:H:Si:O films, for which that obtained by PIIID was thicker and exhibited a decreased ETauc. The mechanical properties - hardness, elastic modulus and stiffness - of films produced by PECVD and PIIID generally present small differences. An interesting effect is the increase in the hardness of a-C:H:Cl films from 1.0 to 3.0 GPa when ion implantation is employed. Surface energy correlates well with surface roughness. The implanted films are usually smoother than those obtained by PECVD. ©2013 Elsevier B.V. All rights reserved.

Thermal phase transition for some spin-boson models

In this work we study two different spin-boson models. Such models are generalizations of the Dicke model, it means they describe systems of N identical two-level atoms coupled to a single-mode quantized bosonic field, assuming the rotating wave approximation. In the first model, we consider the wavelength of the bosonic field to be of the order of the linear dimension of the material composed of the atoms, therefore we consider the spatial sinusoidal form of the bosonic field. The second model is the Thompson model, where we consider the presence of phonons in the material composed of the atoms. We study finite temperature properties of the models using the path integral approach and functional methods. In the thermodynamic limit, N→∞, the systems exhibit phase transitions from normal to superradiant phase at some critical values of temperature and coupling constant. We find the asymptotic behavior of the partition functions and the collective spectrums of the systems in the normal and the superradiant phases. We observe that the collective spectrums have zero energy values in the superradiant phases, corresponding to the Goldstone mode associated to the continuous symmetry breaking of the models. Our analysis and results are valid in the limit of zero temperature β→∞, where the models exhibit quantum phase transitions. © 2013 Elsevier B.V. All rights reserved.

Emprego de fibra de cana-de-açúcar na alimentação de cães

Pós-graduação em Medicina Veterinária - FCAV

Enzimas exógenas em dietas extrusadas para cães contendo farelo de soja

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito da ingestão de amido, fibra e energia na resposta glicêmica pós-prandial e saciedade em cães

Pós-graduação em Medicina Veterinária - FCAV

Bebida mista de extrato de soja e suco de amora: análises químicas e sensorial

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produção de cerveja com mel: características físico-químicas, energética e sensorial

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização físico-química, energética e sensorial de refresco adoçado de jabuticaba

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Estudo da cinética da reação de decomposição da fase martensítica no sistema 'CUALMNAG'

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)