Improved Equivalent Frame Analysis Method for Flat Plate Structures in Vicinity of Edge Columns

This paper proposes a modification to the ACI 318-02 equivalent frame method of analysis of reinforced concrete flat plate exterior panels. Two existing code methods were examined: ACI 318 and BS 8110. The derivation of the torsional stiffness of the edge strip as proposed by ACI 318 is examined and a more accurate estimate of this value is proposed, based on both theoretical analysis and experimental results. A series of 1/3-scale models of flat plate exterior panels have been tested. Unique experimental results were obtained by measuring strains in reinforcing bars at approximately 200 selected locations in the plate panel throughout the entire loading history. The measured strains were used to calculate curvature and, hence, bending moments; these were used along with moments in the columns to assess the accuracy of the equivalent frame methods. The proposed method leads to a more accurate prediction of the moments in the plate at the column front face, at the panel midspan, and in the edge column. Registered Subscribers: View the full article. This document is available as a free download to qualified members. An electronic (PDF) version is available for purchase and download. Click on the Order Now button to continue with the download.

Measuring the value to the public of pig welfare improvements: a contingent valuation approach

The welfare of farm animals is a policy area that has increased greatly in importance in recent years. When deciding whether a proposed policy should be implemented, it can be useful for policymakers to compare the costs of the proposed improvement with the perceived benefits. The costs are relatively straightforward to calculate but little is known about the benefits. The Contingent Valuation Method (CVM), a direct survey-based method, can be used to shed some light on this. This approach elicits the willingness-to-pay (WTP) for the provision of some public good or service. This paper reports the results of a contingent valuation study of the value of welfare improvements for growing pigs. Attitudes and opinions with regard to form animal welfare are explored and WTP elicited for various pig welfare improvements including increases in space allowance, environmental enrichment and research into improved pig housing design. The results reveal a positive WTP for these improvements. However, it is also noteworthy that a significant proportion of the general public is willing to pay nothing for these improvements. Overall, the study illustrates the usefulness of the CVM approach as a tool for policymakers in assessing the merits of possible policy initiatives affecting the welfare of animals.

Methods for measuring proteasome activity: Current limitations and future developments

The proteasome has been validated as a therapeutic target, with proteasome inhibitors showing particular efficacy in the treatment of Multiple Myeloma. A wide range of methods have been developed to profile proteasome activity. These include the current method of choice fluorogenic peptide substrates, as well as bioluminescent imaging, immunological methods, and more recently, site-specific fluorescent probes. The aim of this review is to evaluate the currently available methods for profiling proteasome activity and their suitability for use in translational studies. Ongoing development of techniques for profiling proteasome activity will facilitate future research into proteasome-related pathologies, thus accelerating the development of more specific drug regimes. (C) 2010 Elsevier Ltd. All rights reserved.

TECHNICAL NOTE. A BRIEF REVIEW OF METHODS FOR MEASURING THE PERMEATION PROPERTIES OF CONCRETE IN SITU

Numerous methods are available to measure the permeation properties of concrete, which can be classified in terms of the diffusion, absorption and permeability properties. The results from these tests are generally used to infer 'quality' or relative durability. Some of these tests involve the laboratory assessment of a sample of concrete extracted from the structure. However, this Technical Note concentrates on the alternative methods appropriate for use on site. Guidance is given on the choice of an appropriate test method, which in most practical situations depends on the predominant mechanism acting on the concrete under consideration.

Assessing and measuring impact of a digital collection in the humanities: An analysis of the SPHERE (Stormont Parliamentary Hansards: Embedded in Research and Education) Project

Although a substantial corpus of digital materials is now available to scholarship across the disciplines, objective evidence of their use, impact, and value, based on a robust assessment, is sparse. Traditional methods of assessment of impact in the humanities, notably citation in scholarly publications, are not an effective way of assessing impact of digital content. These issues are problematic in the field of Digital Humanities where there is a need to effectively assess impact to justify its continued funding and existence. A number of qualitative and quantitative methods exist that can be used to monitor the use of digital resources in various contexts although they have yet to be applied widely. These have been made available to the creators, managers, and funders of digital content in an accessible form through the TIDSR (Toolkit for the Impact of Digital Scholarly Resources) developed by the Oxford Internet Institute. In 2011, the authors of this article developed the SPHERE project (Stormont Parliamentary Hansards: Embedded in Research and Education) specifically to use TIDSR to evaluate the use and impact of The Stormont Papers, a digital collection of the Hansards of the Stormont Northern Irish Parliament from 1921 to 1972. This article presents the methodology, findings, and analysis of the project. The authors argue that TIDSR is a useful and, critically, transferrable method to understand and increase the impact of digital resources. The findings of the project are modified into a series of wider recommendations on protecting the investment in digital resources by increasing their use, value, and impact. It is reasonable to suggest that effectively showing the impact of Digital Humanities is critical to its survival.

A single microphone capillary-based system for measuring the complex input impedance of musical wind instruments

Capillary-based systems for measuring the input impedance of musical wind instruments were first developed in the mid-20th century and remain in widespread use today. In this paper, the basic principles and assumptions underpinning the design of such systems are examined. Inexpensive modifications to a capillary-based impedance measurement set-up made possible due to advances in computing and data acquisition technology are discussed. The modified set-up is able to measure both impedance magnitude and impedance phase even though it only contains one microphone. In addition, a method of calibration is described that results in a significant improvement in accuracy when measuring high impedance objects on the modified capillary-based system. The method involves carrying out calibration measurements on two different objects whose impedances are well-known theoretically. The benefits of performing two calibration measurements (as opposed to the one calibration measurement that has been traditionally used) are demonstrated experimentally through input impedance measurements on two test objects and a Boosey and Hawkes oboe. © S. Hirzel Verlag · EAA.

What is the best method for diagnosing glaucoma?

Glaucoma is characterized by a typical appearance of the optic disc and peripheral visual field loss. However, diagnosis may be challenging even for an experienced clinician due to wide variability among normal and glaucomatous eyes. Standard automated perimetry is routinely used to establish the diagnosis of glaucoma. However, there is evidence that substantial retinal ganglion cell damage may occur in glaucoma before visual field defects are seen. The introduction of newer imaging devices such as confocal scanning laser ophthalmoscopy, scanning laser polarimetry and optical coherence tomography for measuring structural changes in the optic nerve head and retinal nerve fiber layer seems promising for early detection of glaucoma. New functional tests may also help in the diagnosis. However, there is no evidence that a single measurement is superior to the others and a combination of tests may be needed for detecting early damage in glaucoma. © 2010 Expert Reviews Ltd.

Production of a broad specificity antibody for the development and validation of an optical SPR screening method for free and intracellular microcystins and nodularin in cyanobacteria cultures

A highly sensitive broad specificity monoclonal antibody was produced and characterised for microcystin detection through the development of a rapid surface plasmon resonance (SPR) optical biosensor based immunoassay. The antibody displayed the following cross-reactivity: MC-LR 100%; MC-RR 108%; MC-YR 68%; MC-LA 69%; MC-LW 71%; MC-LF 68%; and Nodularin 94%. Microcystin-LR was covalently attached to a CM5 chip and with the monoclonal antibody was employed in a competitive 4min injection assay to detect total microcystins in water samples below the WHO recommended limit (1µg/L). A 'total microcystin' level was determined by measuring free and intracellular concentrations in cyanobacterial culture samples as this toxin is an endotoxin. Glass bead beating was used to lyse the cells as a rapid extraction procedure. This method was validated according to European Commission Decision 96/23/EC criteria. The method was proven to measure intracellular microcystin levels, the main source of the toxin, which often goes undetected by other analytical procedures and is advantageous in that it can be used for the monitoring of blooms to provide an early warning of toxicity. It was shown to be repeatable and reproducible, with recoveries from spiked samples ranging from 74 to 123%, and had % CVs below 10% for intra-assay analysis and 15% for inter-assay analysis. The detection capability of the assay was calculated as 0.5ng/mL for extracellular toxins and 0.05ng/mL for intracellular microcystins. A comparison of the SPR method with LC-MS/MS was achieved by testing six Microcystis aeruginosa cultures and this study yielded a correlation R(2) value of 0.9989.

Measuring work and heat in ultracold quantum gases

We propose a feasible experimental scheme to direct measure heat and work in cold atomic setups. The method is based on a recent proposal which shows that work is a positive operator valued measure (POVM). In the present contribution, we demonstrate that the interaction between the atoms and the light polarization of a probe laser allows us to implement such POVM. In this way the work done on or extracted from the atoms after a given process is encoded in the light quadrature that can be measured with a standard homodyne detection. The protocol allows one to verify fluctuation theorems and study properties of the non-unitary dynamics of a given thermodynamic process.

Comparative Assessment of Methods for Measuring Consensual Poverty: Sort Card Versus CAPI

Poverty means more than having a low income and includes exclusion from a minimally accepted way of life. It is now common practice in Europe to measure progress against poverty in terms of low income, material deprivation rates and some combination of both. This makes material deprivation indicators, and their selection, highly significant in its own right. The ‘consensual poverty’ approach is to identify deprivation items which a majority of the population agree constitute life’s basic necessities, accepting that these items will need revised over time to reflect social change. Traditionally, this has been carried out in the UK through specialised poverty surveys using a Sort Card (SC) technique.

Based on analysis of a 2012 omnibus survey, and discussions with three interviewers, this article examines how perception of necessities is affected by mode of administration – SC and Computer Assisted Personal Interviewing (CAPI). More CAPI respondents scored deprivation items necessary. Greatest disparities are in material items where 25 out of 32 items were significantly higher via CAPI. Closer agreement is found in social participation with 3 out of 14 activities significantly different. Consensus is higher on children’s material deprivation.
We consider influencing variables which could account for the disparities and believe that the SC method produces a more considered response. However, in light of technological advances, we question how long the SC method will remain socially acceptable. This paper concludes that the CAPI method can be easily modified without compromising the benefits of the SC method in capturing thoughtful responses.

Measuring the macrosystem in post-accord Northern Ireland: A social-ecological approach

The macrosystem refers to the overarching patterns that influence behavior at each level of the social ecology (Bronfenbrenner, 1977), making it a necessary component for assessing human development in contexts of political violence. This article proposes a method for systematically measuring the macrosystem in Northern Ireland that allows for a subnational analysis, multiple time units, and indicators of both low-level violence and positive relations. Articles were randomly chosen for each weekday in 2006-2011 from two prominent Northern Irish newspapers and coded according to their reflection of positive relations and political tensions between Catholics and Protestants. The newspaper data were then compared to existing macro-level measurements in Northern Ireland. We found that the newspaper data provided a more nuanced understanding of fluctuations in intergroup relations than the corresponding measures. This has practical implications for peacebuilding and advances our methods for assessing the impact of macro-level processes on individual development.

Applying the motivation-hygiene theory as a means of measuring learner satisfaction with blended learning courses in higher education

This study describes research on a postgraduate blended learning programme within the Department of Education at the University of Aveiro in Portugal. It is based on a multi-philosophical paradigm and examines students‟ satisfaction levels through the application of Herzberg‟s Motivation and Hygiene Theory. The main question being addressed in this research is: “Can the Motivation and Hygiene Theory be adopted as a means to measure student satisfaction with their blended learning environment?” Embedded within this research question are four fundamental questions which set the scene for the development of this research study and are explored in greater detail in Chapters 4 and 5 respectively: 1. What are the factors responsible for bringing about learning satisfaction with their b-Learning course? 2. What are the factors responsible for bringing about learning dissatisfaction with their b-Learning course? 3. Can these factors be represented as Motivation and Hygiene factors? 4. Will this method of measuring learning satisfaction lead to a set of guidelines that could be considered as a framework for the development of b-Learning courses? The results indicate that the Motivation and Hygiene Theory or an adapted version such as the Enricher and Enabler Theory proposed in this study could be considered as a plausible means of analysing an institution‟s b-Learning processes. The opportunity to carry out future research is evident and can be varied depending on the research objectives in mind. Examples where further exploration would be beneficial lay within the application of this theory to the wider sector; the use of larger samples, focusing on the teachers, as well as the learners and the application of Web 2.0 technologies as means of gathering information. The results of this research will be of great significance to those areas of education that are interested in locating quick and efficient means by which to evaluate their b-Learning and to no lesser extent e-Learning environments.

A straightforward method to obtain the cohesive laws of bonded joints under mode I loading

A simple procedure to measure the cohesive laws of bonded joints under mode I loading using the double cantilever beam test is proposed. The method only requires recording the applied load–displacement data and measuring the crack opening displacement at its tip in the course of the experimental test. The strain energy release rate is obtained by a procedure involving the Timoshenko beam theory, the specimen’s compliance and the crack equivalent concept. Following the proposed approach the influence of the fracture process zone is taken into account which is fundamental for an accurate estimation of the failure process details. The cohesive law is obtained by differentiation of the strain energy release rate as a function of the crack opening displacement. The model was validated numerically considering three representative cohesive laws. Numerical simulations using finite element analysis including cohesive zone modeling were performed. The good agreement between the inputted and resulting laws for all the cases considered validates the model. An experimental confirmation was also performed by comparing the numerical and experimental load–displacement curves. The numerical load–displacement curves were obtained by adjusting typical cohesive laws to the ones measured experimentally following the proposed approach and using finite element analysis including cohesive zone modeling. Once again, good agreement was obtained in the comparisons thus demonstrating the good performance of the proposed methodology.

Measuring and testing for the systemically important financial institutions

This paper analyzes the measure of systemic importance ∆CoV aR proposed by Adrian and Brunnermeier (2009, 2010) within the context of a similar class of risk measures used in the risk management literature. In addition, we develop a series of testing procedures, based on ∆CoV aR, to identify and rank the systemically important institutions. We stress the importance of statistical testing in interpreting the measure of systemic importance. An empirical application illustrates the testing procedures, using equity data for three European banks.

Measuring productivity growth when technological change is biased - a new index and an application to UK agriculture

Productivity growth is conventionally measured by indices representing discreet approximations of the Divisia TFP index under the assumption that technological change is Hicks-neutral. When this assumption is violated, these indices are no longer meaningful because they conflate the effects of factor accumulation and technological change. We propose a way of adjusting the conventional TFP index that solves this problem. The method adopts a latent variable approach to the measurement of technical change biases that provides a simple means of correcting product and factor shares in the standard Tornqvist-Theil TFP index. An application to UK agriculture over the period 1953-2000 demonstrates that technical progress is strongly biased. The implications of that bias for productivity measurement are shown to be very large, with the conventional TFP index severely underestimating productivity growth. The result is explained primarily by the fact that technological change has favoured the rapidly accumulating factors against labour, the factor leaving the sector. (C) 2004 Elsevier B.V. All rights reserved.