Effects of melatonin on the endometrial morphology and embryo implantation in rats

Objective: To determine the effects of melatonin on rat endometrium morphology and embryo implantation. Design: Experimental study. Setting: Federal University of Sao Paulo, Brazil. Animal(s): Forty female rats. Intervention(s): GI: control, GII: sham-operated, GIII: pinealectomized, and GIV: pinealectomized rats that received melatonin during 3 months. The GI, GII, and Gin groups received the vehicle of melatonin (NaCl + ethanol). At the end of the treatment, the animals were killed during the estrous phase; the uterus was removed for morphometric analysis. Urine was collected for 6-sulfatoxymelatonin. Blood was collected for estrogen (E) and progesterone (P) level determinations. In a second experiment, female rats were used to evaluate the endometrial embryo implantation. Main Outcome Measure(s): Endometrial morphology and embryo implantation. Result(s): Gin presented the highest values for endometrial area and thickness index, number of endometrial glands, and eosinophils. The number of vessels of groups I, II, and IV was fewer than that of Gin. The highest number of eosinophils was detected in Gin in comparison to other groups. The implantation rate in Gin was the lowest of all groups. This implantation rate was significantly increased and restored toward normal in GIV. Conclusion(s): Our data suggested that, in nonphotoperiodic animals such as rats, melatonin may positively affect the endometrial morphology and improve embryo implantation.

Ultrastructural evaluation of gingival glycosaminoglycans in ovariectomized rats: Effects of steroid hormone therapy

Background/Aims: To evaluate the behavior of glycosaminoglycans (GAGs) in rat gingiva and the effects of lack of sexual steroids and the hormonal therapy with estrogen and dexamethasone (DEX). Methods: 40 female rats were divided into four groups: GI: animals in permanent estrus; GII: ovariectomized (OVX) animals + vehicle; GIII: OVX animals treated with 17 beta-estradiol benzoate (10 mu g/kg), and GIV: OVX animals treated with 17 beta-estradiol benzoate (10 mu g/kg) + DEX (3 mg/kg). After treatment, the gingiva was removed and its GAGs content was evaluated by electronic microscopy after stained by cuprolinic blue technique. Results: The electron-microscopic data showed that low values of chondroitin sulfate were found in castrated animals (35.05 +/- 3.58%) compared to other groups (GI: 41.17 +/- 1.13; GIII: 48.04 +/- 2.60; GIV: 49.09 +/- 2.68%). In contrast, the amount of dermatan sulfate in GII (57.70 +/- 2.50%) was higher than in the other groups (GI: 46.12 +/- 1.30; GIII: 42.65 +/- 2.98; GIV: 42.68 +/- 5.43%). Conclusions: GAGs may be influenced by estradiol, and DEX did not seem to antagonize the role of estradiol in the GAGs of gingiva. The histotypical structure of gingiva is related to the amount of chondroitin sulfate. Consequently, the estrogen therapy may be important for gingival health. Copyright (C) 2007 S. Karger AG, Basel.

Analysis of marine bivalve shellfish from the fish market in Santos city, Sao Paulo state, Brazil, for Toxoplasma gondii

The aim of this study was to determine if Toxoplasma gondii are present in oysters (Crassostrea rhizophorae) and mussels (Mytella guyanensis) under natural conditions using a bioassay in mice and molecular detection methods. We first compared two standard protocols for DNA extraction, phenol-chloroform (PC) and guanidine-thiocyanate (GT), for both molluscs. A total of 300 oysters and 300 mussels were then acquired from the fish market in Santos city, Sao Paulo state, Brazil, between March and August of 2008 and divided into 60 groups of 5 oysters and 20 groups of 15 mussels. To isolate the parasite, five mice were orally inoculated with sieved tissue homogenates from each group of oysters or mussels. For molecular detection of T. gondii, DNA from mussels was extracted using the PC method and DNA from oysters was extracted using the GT method. A nested-PCR (Polymerase Chain Reaction) based on the amplification of a 155 bp fragment from the B1 gene of T. gondii was then performed. Eleven PCR-RFLP (Restriction Fragment Length Polymorphism) markers, SAG1, SAG2, SAG3, BTUB, GRA6, c22-8, c29-2, L358, PK1, CS3 and Apico, were used to genotype positive samples. There was no isolation of the parasite by bioassay in mice. T. gondii was not detected in any of the groups of mussels by nested-PCR. DNA of T. gondii was apparently detected by nested-PCR in 2 groups of oysters (3.3%). Genotyping of these two positive samples was not successful. The results suggest that oysters of the species C. rhizophorae, the most common species from the coast of Sao Paulo, can filter and retain T. gondii oocysts from the marine environment. Ingestion of raw oysters as a potential transmission source of T. gondii to humans and marine mammals should be further investigated. (C) 2010 Elsevier B.V. All rights reserved.

Os gêneros de discurso, cenografia e ethos em discursos da obra O templo e a forca de Luiz Guilherme Santos Neves

A pesquisa busca mostrar como o discurso religioso do gênero sermão, na voz do enunciador Frei Gregório José Maria de Bene, pode influir na estratégia de adesão e convencimento dos escravos da região de Serra, província do Espírito Santo, para a construção da igreja do Queimado. O sermão citado é o recorte fundamental do discurso literário O Templo e a Forca (1999), recriado por Luiz Guilherme Santos Neves, analisado a partir de cena englobante legitimadora. O trabalho insere-se nos estudos da Analise do Discurso (AD) de linha francesa, pelo referencial teórico de Dominique Maingueneau, que nos orientará quanto às cenografias do padre, sua imagem de enunciador, as condições de produção do sermão, ressaltando elementos que interagem no embate, visando à sociedade da época e às questões culturais dos envolvidos na eclosão da revolta. O principal objetivo é examinar as cenas de enunciação e como se constrói o ethos religioso em cada cena e suas variadas funções. É elementar dizer que o religioso se reconstrói a cada momento a partir do comprometimento com as situações de comunicação. Para maior entendi-mento, dizemos que essas diversas reconstruções apresentam nos discursos diferentes encenações desse tão fomentado religioso com suas estratégias de adesão, apresentando-se ora com a imagem daquele que fala em nome de Deus, preza a docilidade da vida do campo à sombra das andirobeiras gigantes onde se pode sentir o silêncio que convida à contemplação e à prece; ora aquele comprometido com seus propósitos interesseiros e pessoais. Fala para não ser entendido, e o que vale é erguer a casa de São José sem poupar a carne e o sangue das mortes que virão. Importa ressaltar que sempre há possibilidade de olhar ingênuo sobre texto religioso, que, conforme Main-gueneau (2010), só é legível relacionado a vasto intertexto que contribuirá para estruturar o discurso. Para enriquecer ainda mais este estudo, afora o gênero sermão usamos recortes que estruturam o discurso de Neves e sinalizam as variadas cenografias e a forma como se constituem enquanto gêneros: Diálogo interior – momentos solitários do frade – Visão do frade e Monólogo; Diálogo Compartilhado – segmenta diálogos entre o enunciador e seus vários co-enunciadores, que estruturam os acontecimentos do discurso; e o gênero exortação, do padre aos escravos. Os recortes são momentos de grandes embates recriados pelo autor, em discurso leve fazendo seu leitor transitar prazerosamente junto ao frade entre as suas variadas imagens nos discursos. Levando o leitor a acreditar tratar-se de cenas relacionadas ao gênero cômico. E talvez o fosse, se não terminasse em revolta.

Conception of a flexible integrator and lean model for integrated management systems

Management systems standards (MSSs) have developed in an unprecedented manner in the last few years. These MSS cover a wide array of different disciplines, aims and activities of organisations. Also, organisations are populated with an enormous diversity of independent management systems (MSs). An integrated management system (IMS) tends to integrate some or all components of the business. Maximising their integration in one coherent and efficient MS is increasingly a strategic priority and constitutes an opportunity for businesses to be more competitive and consequently, promote its sustainable success. Those organisations that are quicker and more efficient in their integration and continuous improvement will have a competitive advantage in obtaining sustainable value in our global and competitive business world. Several scholars have proposed various theoretical approaches regarding the integration of management sub-systems, leading to the conclusion that there is no common practice for all organisations as they encompass different characteristics. One other author shows that several tangible and intangible gains for organisations, as well as to their internal and external stakeholders, are achieved with the integration of the individual standardised MSs. The purpose of this work was to conceive a model, Flexible, Integrator and Lean for IMSs, according to ISO 9001 for quality; ISO 14001 for environment and OHSAS 18001 for occupational health and safety (IMS–QES), that can be adapted and progressively assimilate other MSs, such as, SA 8000/ISO 26000 for social accountability, ISO 31000 for risk management and ISO/IEC 27001 for information security management, among others. The IMS–QES model was designed in the real environment of an industrial Portuguese small and medium enterprise, that over the years has been adopting, gradually, in whole or in part, individual MSSs. The developed model is based on a preliminary investigation conducted through a questionnaire. The strategy and research methods have taken into consideration the case study. Among the main findings of the survey we highlight: the creation of added value for the business through the elimination of several organisational wastes; the integrated management of the sustainability components; the elimination of conflicts between independent MS; dialogue with the main stakeholders and commitment to their ongoing satisfaction and increased contribution to the company’s competitiveness; and greater valorisation and motivation of employees as a result of the expansion of their skill base, actions and responsibilities, with their consequent empowerment. A set of key performance indicators (KPIs) constitute the support, in a perspective of business excellence, to the follow up of the organisation’s progress towards the vision and achievement of the defined objectives in the context of each component of the IMS model. The conceived model had many phases and the one presented in this work is the last required for the integration of quality, environment, safety and others individual standardised MSs. Globally, the investigation results, by themselves, justified and prioritised the conception of an IMS–QES model, to be implemented at the company where the investigation was conducted, but also a generic model of an IMS, which may be more flexible, integrator and lean as possible, potentiating the efficiency, added value both in the present and, fundamentally, for future.

Densidade populacional de Pratylenchus spp. em pastagens de Brachiaria spp. e sua influência na disponibilidade e na qualidade da forragem

Objetivando avaliar a densidade populacional de Pratylenchus brachyurus e Pratylenchus zeae, associados à Brachiaria brizantha, B. decumbens e B. humidicola, e sua influência na disponibilidade e na qualidade da forragem, realizou-se este trabalho. O experimento foi conduzido na Agropecuária Hisaeda, em Terenos, MS. Coletaram-se amostras de solo, raízes e parte aérea, em dez repetições ao acaso, de 1 m² cada, dos seguintes tratamentos: Bom, Intermediário e Ruim, caracterizados visualmente, considerando-se a percentagem de material verde das plantas. As densidades de P. brachyurus e P. zeae foram avaliadas nas amostras de solo e raízes. Na parte aérea, avaliou-se a disponibilidade de matéria seca dos materiais verde, morto e da rebrota, estado nutricional das plantas e qualidade da forragem. A fertilidade do solo foi determinada em todas as unidades amostrais. Ambos os nematoides foram identificados em todas as amostras, com maior número nas raízes (entre 87-311 P. brachyurus e 1-61 P. zeae.10 g-1) que no solo (de 0-8 P. brachyurus a 1-39 P. zeae.200 cm-3), no entanto, não houve diferenças significativas, na quantidade de espécimes, entre os tratamentos. Considerando-se que essas forrageiras são perenes e hospedam Pratylenchus spp., há tendência ao aumento da população desses patógenos, ao longo do tempo, podendo se tornar um sério problema fitossanitário.

Certification and integration of environment with quality and safety – a path to sustained success

According to Wright [1] certification of products and processes began during the 1960’s in the manufacturing industry, as a tool to control and assure the quality/conformity of products and services provided by suppliers to customers/consumers. Thus, the series of ISO 9000 was published first time, in 1987 and it was been created with a flexible character, to be reviewed periodically. Later, were published others normative references, which highlight the ISO 14001 in 1996 and OHSAS 18001 in 1999. This was also, the natural sequence of the certification processes in the organizations, i.e., began with the certification of quality management systems (QMS) followed by the environmental management systems (EMS) and after for the Occupational Health and Safety Management System (OHSMS). Hence, a high percentage of organizations with an EMS, in accordance with the ISO 14001, had also implemented, a certified QMS, in accordance with ISO 9001. At first the implementation of a QMS was particularly relevant in high demanding activity sectors, like the automotive and aeronautical industries, but it has rapidly extended to every activity sector, becoming a common requisite of any company worldwide and a factor of competitiveness and survival. Due to the increasingly demanding environmental legislation in developed countries, companies nowadays are required to seriously take into consideration not only environmental aspects associated to the production chain itself, but also to the life cycle of their products.

Otimização de recursos pela integração de sistemas de gestão

Otimização de recursos pela integração de sistemas de gestão