On Nonlinear Dynamics and Control of A Particular Portal Frame Foundation Model, Excited by a Non-Ideal Motor

The nonlinear dynamic response and a nonlinear control method of a particular portal frame foundation for an unbalanced rotating machine with limited power (non-ideal motor) are examined. Numerical simulations are performed for a set of control parameters (depending on the voltage of the motor) related to the static and dynamic characteristics of the motor. The interaction of the structure with the excitation source may lead to the occurrence of interesting phenomena during the forward passage through the several resonance states of the systems. A mathematical model having two degrees of freedom simplifies the non-ideal system. The study of controlling steady-state vibrations of the non-ideal system is based on the saturation phenomenon due to internal resonance.

Co-simulation tools for networked control systems: revision and utilization

Networked control systems (NCSs) are distributed control systems in which the sensors, actuators, and controllers are physically separated and connected through an industrial network. The main challenge related to the development of NCSs is the degenerative effects caused by the inclusion of this communication network in the closed loop control. In order to mitigate these effects, co-simulation tools for NCS have been developed to study the network influence in the NCS. This paper presents a revision about co-simulation tools for NCS and the application of two of these tools for the design and evaluation of NCSs. The TrueTime and Jitterbug tools were used together to evaluate the main configuration parameter that affects the performance of CAN-based NCS and to verify the NCS quality of control under various timing conditions including different transmission period of messages and network delays. Therefore, the simulation results led to the conclusion that despite the transmission period of messages is the most significant factor among the analyzed in the design of NCS, its influence is related to the kind of system with greater effects in NCSs with fast dynamics.

Phase-Locked loops lock-in range in Frequency Modulated-Atomic Force Microscope nonlinear control system

Since the mid 1980s the Atomic Force Microscope is one the most powerful tools to perform surface investigation, and since 1995 Non-Contact AFM achieved true atomic resolution. The Frequency-Modulated Atomic Force Microscope (FM-AFM) operates in the dynamic mode, which means that the control system of the FM-AFM must force the micro-cantilever to oscillate with constant amplitude and frequency. However, tip-sample interaction forces cause modulations in the microcantilever motion. A Phase-Locked loop (PLL) is used to demodulate the tip-sample interaction forces from the microcantilever motion. The demodulated signal is used as the feedback signal to the control system, and to generate both topographic and dissipation images. As a consequence, a proper design of the PLL is vital to the FM-AFM performance. In this work, using bifurcation analysis, the lock-in range of the PLL is determined as a function of the frequency shift (Q) of the microcantilever and of the other design parameters, providing a technique to properly design the PLL in the FM-AFM system. (C) 2011 Elsevier B.V. All rights reserved.

Short-Term Effects of the Use of Non-Rigid Tools for Postural Control by Adults with Intellectual Disabilities

We tested the short-term effects of a nonrigid tool, identified as an "anchor system" (e.g., ropes attached to varying weights resting on the floor), on the postural stabilization of blindfolded adults with and without intellectual disabilities (ID). Participants held a pair of anchors one in each hand, under three weight conditions (250 g, 500 g and 1,000 g), while they performed a restricted balance task (standing for 30 s on a balance beam placed on top of a force platform). These conditions were called anchor practice trials. Before and after the practice trials, a condition without anchors was tested. Control practice groups, who practiced blocks of trials without anchors, included individuals with and without ID. The anchor system improved subjects' balance during the standing task, for both groups. For the control groups, the performance of successive trials in the condition without the anchor system showed no improvement in postural stability. The individuals with intellectual disability, as well as their peers without ID, used the haptic cues of nonrigid tools (i.e., the anchor system) to stabilize their posture, and the short-term stabilizing effects appeared to result from their previous use of the anchor system.

DengueTools: innovative tools and strategies for the surveillance and control of dengue

Dengue fever is a mosquito-borne viral disease estimated to cause about 230 million infections worldwide every year, of which 25,000 are fatal. Global incidence has risen rapidly in recent decades with some 3.6 billion people, over half of the world's population, now at risk, mainly in urban centres of the tropics and subtropics. Demographic and societal changes, in particular urbanization, globalization, and increased international travel, are major contributors to the rise in incidence and geographic expansion of dengue infections. Major research gaps continue to hamper the control of dengue. The European Commission launched a call under the 7th Framework Programme with the title of 'Comprehensive control of Dengue fever under changing climatic conditions'. Fourteen partners from several countries in Europe, Asia, and South America formed a consortium named 'DengueTools' to respond to the call to achieve better diagnosis, surveillance, prevention, and predictive models and improve our understanding of the spread of dengue to previously uninfected regions (including Europe) in the context of globalization and climate change. The consortium comprises 12 work packages to address a set of research questions in three areas: Research area 1: Develop a comprehensive early warning and surveillance system that has predictive capability for epidemic dengue and benefits from novel tools for laboratory diagnosis and vector monitoring. Research area 2: Develop novel strategies to prevent dengue in children. Research area 3: Understand and predict the risk of global spread of dengue, in particular the risk of introduction and establishment in Europe, within the context of parameters of vectorial capacity, global mobility, and climate change. In this paper, we report on the rationale and specific study objectives of 'DengueTools'. DengueTools is funded under the Health theme of the Seventh Framework Programme of the European Community, Grant Agreement Number: 282589 Dengue Tools.

Numerical analysis of control surface effects on AUV

Computational fluid dynamics, CFD, is becoming an essential tool in the prediction of the hydrodynamic efforts and flow characteristics of underwater vehicles for manoeuvring studies. However, when applied to the manoeuvrability of autonomous underwater vehicles, AUVs, most studies have focused on the de- termination of static coefficients without considering the effects of the vehicle control surface deflection. This paper analyses the hydrodynamic efforts generated on an AUV considering the combined effects of the control surface deflection and the angle of attack using CFD software based on the Reynolds-averaged Navier–Stokes formulations. The CFD simulations are also independently conducted for the AUV bare hull and control surface to better identify their individual and interference efforts and to validate the simulations by comparing the experimental results obtained in a towing tank. Several simulations of the bare hull case were conducted to select the k –ω SST turbulent model with the viscosity approach that best predicts its hydrodynamic efforts. Mesh sensitivity analyses were conducted for all simulations. For the flow around the control surfaces, the CFD results were analysed according to two different methodologies, standard and nonlinear. The nonlinear regression methodology provides better results than the standard methodology does for predicting the stall at the control surface. The flow simulations have shown that the occurrence of the control surface stall depends on a linear relationship between the angle of attack and the control surface deflection. This type of information can be used in designing the vehicle’s autopilot system.

Architectures and design patterns for functional design of logic control and diagnostics in industrial automation

Recently in most of the industrial automation process an ever increasing degree of automation has been observed. This increasing is motivated by the higher requirement of systems with great performance in terms of quality of products/services generated, productivity, efficiency and low costs in the design, realization and maintenance. This trend in the growth of complex automation systems is rapidly spreading over automated manufacturing systems (AMS), where the integration of the mechanical and electronic technology, typical of the Mechatronics, is merging with other technologies such as Informatics and the communication networks. An AMS is a very complex system that can be thought constituted by a set of flexible working stations, one or more transportation systems. To understand how this machine are important in our society let considerate that every day most of us use bottles of water or soda, buy product in box like food or cigarets and so on. Another important consideration from its complexity derive from the fact that the the consortium of machine producers has estimated around 350 types of manufacturing machine. A large number of manufacturing machine industry are presented in Italy and notably packaging machine industry,in particular a great concentration of this kind of industry is located in Bologna area; for this reason the Bologna area is called “packaging valley”. Usually, the various parts of the AMS interact among them in a concurrent and asynchronous way, and coordinate the parts of the machine to obtain a desiderated overall behaviour is an hard task. Often, this is the case in large scale systems, organized in a modular and distributed manner. Even if the success of a modern AMS from a functional and behavioural point of view is still to attribute to the design choices operated in the definition of the mechanical structure and electrical electronic architecture, the system that governs the control of the plant is becoming crucial, because of the large number of duties associated to it. Apart from the activity inherent to the automation of themachine cycles, the supervisory system is called to perform other main functions such as: emulating the behaviour of traditional mechanical members thus allowing a drastic constructive simplification of the machine and a crucial functional flexibility; dynamically adapting the control strategies according to the different productive needs and to the different operational scenarios; obtaining a high quality of the final product through the verification of the correctness of the processing; addressing the operator devoted to themachine to promptly and carefully take the actions devoted to establish or restore the optimal operating conditions; managing in real time information on diagnostics, as a support of the maintenance operations of the machine. The kind of facilities that designers can directly find on themarket, in terms of software component libraries provides in fact an adequate support as regard the implementation of either top-level or bottom-level functionalities, typically pertaining to the domains of user-friendly HMIs, closed-loop regulation and motion control, fieldbus-based interconnection of remote smart devices. What is still lacking is a reference framework comprising a comprehensive set of highly reusable logic control components that, focussing on the cross-cutting functionalities characterizing the automation domain, may help the designers in the process of modelling and structuring their applications according to the specific needs. Historically, the design and verification process for complex automated industrial systems is performed in empirical way, without a clear distinction between functional and technological-implementation concepts and without a systematic method to organically deal with the complete system. Traditionally, in the field of analog and digital control design and verification through formal and simulation tools have been adopted since a long time ago, at least for multivariable and/or nonlinear controllers for complex time-driven dynamics as in the fields of vehicles, aircrafts, robots, electric drives and complex power electronics equipments. Moving to the field of logic control, typical for industrial manufacturing automation, the design and verification process is approached in a completely different way, usually very “unstructured”. No clear distinction between functions and implementations, between functional architectures and technological architectures and platforms is considered. Probably this difference is due to the different “dynamical framework”of logic control with respect to analog/digital control. As a matter of facts, in logic control discrete-events dynamics replace time-driven dynamics; hence most of the formal and mathematical tools of analog/digital control cannot be directly migrated to logic control to enlighten the distinction between functions and implementations. In addition, in the common view of application technicians, logic control design is strictly connected to the adopted implementation technology (relays in the past, software nowadays), leading again to a deep confusion among functional view and technological view. In Industrial automation software engineering, concepts as modularity, encapsulation, composability and reusability are strongly emphasized and profitably realized in the so-calledobject-oriented methodologies. Industrial automation is receiving lately this approach, as testified by some IEC standards IEC 611313, IEC 61499 which have been considered in commercial products only recently. On the other hand, in the scientific and technical literature many contributions have been already proposed to establish a suitable modelling framework for industrial automation. During last years it was possible to note a considerable growth in the exploitation of innovative concepts and technologies from ICT world in industrial automation systems. For what concerns the logic control design, Model Based Design (MBD) is being imported in industrial automation from software engineering field. Another key-point in industrial automated systems is the growth of requirements in terms of availability, reliability and safety for technological systems. In other words, the control system should not only deal with the nominal behaviour, but should also deal with other important duties, such as diagnosis and faults isolations, recovery and safety management. Indeed, together with high performance, in complex systems fault occurrences increase. This is a consequence of the fact that, as it typically occurs in reliable mechatronic systems, in complex systems such as AMS, together with reliable mechanical elements, an increasing number of electronic devices are also present, that are more vulnerable by their own nature. The diagnosis problem and the faults isolation in a generic dynamical system consists in the design of an elaboration unit that, appropriately processing the inputs and outputs of the dynamical system, is also capable of detecting incipient faults on the plant devices, reconfiguring the control system so as to guarantee satisfactory performance. The designer should be able to formally verify the product, certifying that, in its final implementation, it will perform itsrequired function guarantying the desired level of reliability and safety; the next step is that of preventing faults and eventually reconfiguring the control system so that faults are tolerated. On this topic an important improvement to formal verification of logic control, fault diagnosis and fault tolerant control results derive from Discrete Event Systems theory. The aimof this work is to define a design pattern and a control architecture to help the designer of control logic in industrial automated systems. The work starts with a brief discussion on main characteristics and description of industrial automated systems on Chapter 1. In Chapter 2 a survey on the state of the software engineering paradigm applied to industrial automation is discussed. Chapter 3 presentes a architecture for industrial automated systems based on the new concept of Generalized Actuator showing its benefits, while in Chapter 4 this architecture is refined using a novel entity, the Generalized Device in order to have a better reusability and modularity of the control logic. In Chapter 5 a new approach will be present based on Discrete Event Systems for the problemof software formal verification and an active fault tolerant control architecture using online diagnostic. Finally conclusive remarks and some ideas on new directions to explore are given. In Appendix A are briefly reported some concepts and results about Discrete Event Systems which should help the reader in understanding some crucial points in chapter 5; while in Appendix B an overview on the experimental testbed of the Laboratory of Automation of University of Bologna, is reported to validated the approach presented in chapter 3, chapter 4 and chapter 5. In Appendix C some components model used in chapter 5 for formal verification are reported.

Modelling and analysis of networked control strategies in smart power distribution grids: development of co-simulation tools

This thesis is focused on Smart Grid applications in medium voltage distribution networks. For the development of new applications it appears useful the availability of simulation tools able to model dynamic behavior of both the power system and the communication network. Such a co-simulation environment would allow the assessment of the feasibility of using a given network technology to support communication-based Smart Grid control schemes on an existing segment of the electrical grid and to determine the range of control schemes that different communications technologies can support. For this reason, is presented a co-simulation platform that has been built by linking the Electromagnetic Transients Program Simulator (EMTP v3.0) with a Telecommunication Network Simulator (OPNET-Riverbed v18.0). The simulator is used to design and analyze a coordinate use of Distributed Energy Resources (DERs) for the voltage/var control (VVC) in distribution network. This thesis is focused control structure based on the use of phase measurement units (PMUs). In order to limit the required reinforcements of the communication infrastructures currently adopted by Distribution Network Operators (DNOs), the study is focused on leader-less MAS schemes that do not assign special coordinating rules to specific agents. Leader-less MAS are expected to produce more uniform communication traffic than centralized approaches that include a moderator agent. Moreover, leader-less MAS are expected to be less affected by limitations and constraint of some communication links. The developed co-simulator has allowed the definition of specific countermeasures against the limitations of the communication network, with particular reference to the latency and loss and information, for both the case of wired and wireless communication networks. Moreover, the co-simulation platform has bee also coupled with a mobility simulator in order to study specific countermeasures against the negative effects on the medium voltage/current distribution network caused by the concurrent connection of electric vehicles.

Dynamics and control issues of multi-rotor platforms

This thesis deals with the analytic study of dynamics of Multi--Rotor Unmanned Aerial Vehicles. It is conceived to give a set of mathematical instruments apt to the theoretical study and design of these flying machines. The entire work is organized in analogy with classical academic texts about airplane flight dynamics. First, the non--linear equations of motion are defined and all the external actions are modeled, with particular attention to rotors aerodynamics. All the equations are provided in a form, and with personal expedients, to be directly exploitable in a simulation environment. This has requited an answer to questions like the trim of such mathematical systems. All the treatment is developed aiming at the description of different multi--rotor configurations. Then, the linearized equations of motion are derived. The computation of the stability and control derivatives of the linear model is carried out. The study of static and dynamic stability characteristics is, thus, addressed, showing the influence of the various geometric and aerodynamic parameters of the machine and in particular of the rotors. All the theoretic results are finally utilized in two interesting cases. One concerns the design of control systems for attitude stabilization. The linear model permits the tuning of linear controllers gains and the non--linear model allows the numerical testing. The other case is the study of the performances of an innovative configuration of quad--rotor aircraft. With the non--linear model the feasibility of maneuvers impossible for a traditional quad--rotor is assessed. The linear model is applied to the controllability analysis of such an aircraft in case of actuator block.

Magnetic actuators for nanosatellite attitude control

The research and the activities presented in the following thesis report have been led at the California Polytechnic State University (US) under the supervision of Prof. Jordi Puig Suari. The objective of the research has been the study of magnetic actuators for nanosatellite attitude control, called magnetorquer. Theese actuators are generally divided in three different kinds: air core torquer, embedded coil and torquerod. In a first phase of the activity, each technology has been analyzed, defining advantages and disadvantages, determining manufacturing procedures and creating mathematical model and designing equation. Dimensioning tools have been then implemented in numerical software to create an instrument that permits to determine the optimal configuration for defined requirements and constraints. In a second phase of the activities the models created have been validated exploiting prototypes and proper instruments for measurements. The instruments and the material exploited for experiments and prototyping have been provided by the PolySat and CubeSat laboratories. The results obtained led to the definition of a complete designing tool and procedure for nanosatellite magnetic actuators, introducing a cost analysis for each kind of solution. The models and the tools have been maintained fully parametric in order to offer a universal re-scalable instrument for satellite of different dimension class.

Numerical solution of optimal control problems with constant control delays

We investigate a class of optimal control problems that exhibit constant exogenously given delays in the control in the equation of motion of the differential states. Therefore, we formulate an exemplary optimal control problem with one stock and one control variable and review some analytic properties of an optimal solution. However, analytical considerations are quite limited in case of delayed optimal control problems. In order to overcome these limits, we reformulate the problem and apply direct numerical methods to calculate approximate solutions that give a better understanding of this class of optimization problems. In particular, we present two possibilities to reformulate the delayed optimal control problem into an instantaneous optimal control problem and show how these can be solved numerically with a stateof- the-art direct method by applying Bock’s direct multiple shooting algorithm. We further demonstrate the strength of our approach by two economic examples.

Desarrollo de una herramienta de minitorización y control de aplicaciones distribuidas en un entorno de integración continua

Debido a la creciente relevancia de la computación en la nube y de los sistemas distribuidos, cobran también creciente interés las herramientas que ayudan a los desarrolladores y administradores a desempeñar sus funciones con la mayor eficacia posible. Por ello el objetivo principal de este trabajo es el desarrollo de una herramienta capaz de crear y controlar un entorno de almacenamiento de claves distribuidas desde una máquina local e independiente, aumentando la productividad mediante la automatización de todas las tareas. La herramienta desarrollada tiene la capacidad necesaria para integrarse tanto en proyectos que se encuentren en marcha como para proyectos que aún no hayan comenzado y proveer una solución sencilla, eficaz, y, sobre todo, útil. A lo largo del trabajo se ha realizado una gran tarea de análisis para determinar cuáles serán, de entre las posibilidades existentes, las más apropiadas para su implementación, teniendo en cuenta las tecnologías líderes disponibles en el estado del arte. Ello ha requerido también la obtención de una mejor comprensión de su funcionamiento interno. Se han realizado diferentes diseños que se han analizado y discutido en detalle para encontrar la solución que mejor se adaptaba a los objetivos propuestos. Y finalmente se ha desarrollado una herramienta ligera y sencilla, pero con un gran potencial para la administración. ---ABSTRACT---Due to the growing relevance of cloud computing and distributed systems it seems interesting to take into account the importance of the administration tools that help developers and administrators fulfill their duties in the most efficient ways. Because of this motivation, the main objective of this project is the development of a tool capable of creating and controlling a distributed key storing environment from a local and independent machine, improving the productivity thanks to the automation of all the involved tasks. The developed tool is able to integrate itself into already running projects as well as in not-yet-started ones, providing a simple, efficient and overall useful solution. During this project big tasks of research and analysis have taken place in order to determine, from the existent possibilities, the most suitable for its implementation, taking into account the leading technologies in the sector, which are described in the state of the art section. This has required the acquisition of a better insight of their inner workings. Some different designs have been made and have been discussed in detail with the intention of finding the solution that best suits the proposed objectives. And finally a lightweight and simple tool has been developed, which presents a very big potential for administration tasks.

Sobre la Arquitectura en la definición del Paisaje

Comúnmente la Arquitectura se manifiesta en los edificios como un hecho de la realidad que tiene siempre carácter contemporáneo y ése debe ser el valor supremo de un arte que no distingue entre antiguo y moderno, por afectar al presente y ser contemporáneo como experiencia. Los objetos se insertan irremediablemente en su medio e incluso llegan a definirlo en ocasiones: así, arquitectura y paisaje, aparecerán a veces confundidos con diferencias difíciles de determinar. El término “paisaje” es relativamente moderno y se deriva de ciertas representaciones gráficas o pictóricas producidas en Occidente en época algo posterior al Renacimiento. No obstante, el hecho de que una palabra se pueda escribir o se cite no quiere decir que la realidad a la que responde no pueda existir, pues lo escrito es solamente un medio de expresión, y es obvio que existen otros quizá más antiguos y de idéntica importancia, pues la propia escritura no es más que el reflejo de un fenómeno que ya se ha producido con anterioridad. Parece así que el testimonio de la realidad viene dado por distintos contextos en lo que suele llamarse “cultura” de modo que las culturas pueden tener aspectos de gran interés mediante diferentes sistemas de expresión variados sin que eso tenga que pasar forzosamente por el filtro de un alfabeto y una escritura. A tenor de los primeros descubrimientos, parece que la cuestión de escribir tuvo originalmente un carácter de constatación de apunte contable y tampoco se puede establecer con certeza si algunos utilizaron la escritura como el so-porte adecuado para referir mitos o historias, pues la Arqueología no ha proporcionado sino testimonios fragmentarios; de lo que si está repleta sin duda la historia es de apuntes contables. Otra cuestión que suscita dudas es la propia definición de escritura, pues parece que los más antiguos modos de expresión escrita se reducen a pictogramas que resultan aún indescifrables. Lenguas y toponimia son también herramientas muy útiles para bucear en el pasado, pero aún así persisten dudas en las escrituras que pro-vienen de las representaciones primordiales: la propia escritura en sus orígenes parece alimentarse de las propias intuiciones inmediatas de la representación, algo que evolucionaría representando esa realidad urgente e inmediata del control o el abastecimiento que luego se convertirían en los fragmentos de texto que han podido conservarse. Es notorio, sin embargo, que ese conjunto enorme de convenios gráficos estaba sujeto a la palabra y la desaparición de las culturas determinó también la desaparición consecuente de sus lenguas, y esos signos - fueran o no escritura - han pasado definitivamente a las zonas oscuras del conocimiento. Escribir supone también disponer de capacidad de abstracción gráfica que diferencie la palabra y la cosa, y es posible que la razón que llevara a ese descubrimiento fuera simplemente el de una economía de signos, pues escritura y lenguaje son limitados por definición, mientras que las cosas del mundo son innumerables: ningún idioma contiene todas las palabras para describir todo lo que puede aparecer. Aparentemente, ese el motivo por el cual existe un localismo – un término específico que refiere algo que existe en un lugar y no en otros - en lo que se refiere a dar el nombre a la cosa y también fuente de paradigma entre los pueblos que se consideran primitivos y los que se consideran civilizados. Debe tenerse en cuenta también que esa transposición se da en ambos sentidos, de modo que las culturas más aisladas también incorporan conceptos que carecen de una explicación racional consistente. Las mitologías son así eternas, pues sirven para explicar realidades que carecen de un entendimiento alcanzable y está también bastante claro que los lenguajes resultan ser un enigma, como realidad autónoma que queda en-cerrada y se explica en sí misma. Parece también que los primeros en escribir las consonantes aisladas fueron los pueblos semíticos occidentales de las orillas del Mediterráneo, pueblos que crearon un alfabeto silábico que llegó a ser utilizado incluso por los tartesios en el sur de la península ibérica como el primer alfabeto de toda Europa occidental. Resulta patente que el término “paisaje” se ha nutrido siempre de representaciones, bien escritas o artísticas, pero queda también claro que esas representaciones se suponen derivadas de la creencia en una idea de paisaje como algo que se ve representado en sí mismo, es decir, como la imagen de una realidad externa situada fuera del individuo. Eso es un hecho trascendente, pues el paisaje requiere lejanía de la cosa, de modo que el actor – aún sabiéndose inserto en su paisaje – es incapaz de percibirlo desde dentro. En el paisaje ocurre igual que en un teatro o en una representación: los actores son conscientes de su papel y su posible cometido, pero no son los que realmente pueden disfrutar de la eficacia o de la propia presencia de la obra, pues forman parte de ella. La idea de paisaje proviene de una lectura externa a la de los propios protagonistas del drama, de modo que si quieren ser un crítico del paisaje se debe abandonar la representación para mirar el espectáculo desde una distancia adecuada, al fin y a cabo externa. De ese modo, aparece la primera constatación del hecho del paisaje como una realidad construida por objetos y personajes, pero, sobre todo, es una realidad construida por miradas. Llama también la atención otorgada en las lecturas de los especialistas hacia esa referencia externa - artística si se quiere - sobre el término “paisaje”, de modo que la bibliografía no especializada sobre el particular siempre acaba en tratados de pintura o poesía. Parece sin embargo que el hombre y sus paisajes son realidades indisolubles desde la propia aparición de la especie, de modo que llevar la cuestión hacia términos exclusivamente esteticistas parece una posición parcial. Hombre y medio han formado siempre una sola unidad, aunque esa unidad se haya convertido en determinados casos en sinónimo de depredación y destrozo. Sin embargo, esa destrucción crea igualmente un paisaje como desolación que es resultado del propio quehacer del hombre: elementos que también poseen un contenido sustancial de memoria en los paisajes industriales como un momento de la Historia previo a la automatización y a la globalización de la vida actuales. Quizá el concepto más interesante desde el punto de vista teórico sea precisamente el de esa cualidad del paisaje como mirada, algo externo producido por el contemplador en un momento ajeno a la pertenencia, una mirada que no es tan sólo estética sino comprensiva, gozosa, activa o analítica - pues existen tantas maneras de mirar como sujetos - sin que pueda definirse con precisión esa contemplación más que en términos que alcanzan la propia individualidad. En términos poéticos, también podría establecerse como ese conjunto de miradas individuales crean también una estructura que hace que ese paisaje se valore y se comprenda, de modo que desde ese punto de vista ese paisaje supone una creación colectiva. Con respeto o como depredador, el hombre se ha instalado en su medio, y al hacerlo, ha dejado huellas dentro del propio paisaje que hacen que tome una determinada significación. Naturalmente, existe una teoría que distingue entre “país” y “paisaje”, asumiendo para el primero la noción exclusiva de territorio en la cual el hombre no tiene papel estético alguno. He intentado muchas veces comprender esa posición, sin acabar de entender el planteamiento que la sustenta: parece que la visión de la cosa estará siempre humanizada, aún en las zonas “vírgenes” o intactas, pues la propia visión hace que el objeto se modifique en su propia unidad perceptiva, creando una curiosa indeterminación que lleva a los conocidos equívocos entre imagen real y representación. Efectivamente, la visión de la cosa requiere de una cultura y unos medios que la informan, de modo que un texto, una pintura, una descripción o una fotografía quedarán ya humanizadas por el propio hecho de ser informadas, pues ello otorga una forma a priori. De ese modo, el paisaje figura inscrito en una función que establece tanto aspectos de un paisaje posible como aspectos del paisaje descrito y solamente podrá hablarse sobre la potencialidad del estado final de ese paisaje y nada del propio paisaje en sí, mientras ese paisaje no quede humanizado por el propio observador. Esta cuestión obliga a elegir una definición de paisaje alejada de presupuestos esteticistas para acercarla a los puramente culturales, de modo que no existe otra vía para la investigación que contemplar esa realidad física en función de las coordenadas del hombre que la habita, dotada del contenido correspondiente a esa revelación. Lejos de las posiciones de la geomorfología, el término “paisaje” implicará así unas condiciones determinadas de contemplación por parte de un sujeto por el cual el espectáculo queda humanizado en dicho acto.Cabe pensar también si no es cierto que todos los paisajes requieren de esa condición humanizada, pues aunque no estén habitados están siempre ocupados por esa mirada que los habita, al igual que un escenario sin público que carece de vigencia. A partir de ahí se sitúan las coordenadas en donde este trabajo configura la presencia de la arquitectura en la definición del paisaje, una premisa que parece ya venir otorgada desde el principio, pues esa misma mirada del espectador ya está dotando de un sentido de orden y jerarquía a la contemplación, unas cualidades que están en la base de toda actividad arquitectónica, De hecho la propia definición de “monumento natural” - en si misma una contradicción – expresa ese conflicto, dotado de un fenómeno de admiración y solape entre cultura y naturaleza, como conceptos enfrentados desde su origen. La conclusión sobre el dilema propuesta en la tesis no ha sido otra que suponer que esas dos realidades que son la cultura y el paisaje se han solapado desde el principio de los tiempos del hombre formando un binomio indeslindable. Se ha dicho antes que el proceso de invasión del territorio por el hombre es significativo, y esa significación es la que origina una creación autónoma que se aísla como un concepto abstracto de los entes naturales, tomándolos como material de trabajo, y estableciendo una oposición conceptual en la realidad perforada e interpretada por el hombre que viene a oponerse a lo que supone la caja cerrada e ignota del enigma del mundo. La cuestión de la significación del hombre sobre el territorio se subsume en la creación de unos productos que permanecen y que son testimonio de la propia cultura, de forma que la cantidad de rastro que el hombre deja sobre el territorio contribuye en mayor medida a la cualificación del paisaje como concepto. Eso lleva a establecer que cualquier paisaje - por el mero hecho de serlo y ser definido así – es ya cultural, puesto que está configurado por los productos de la cultura. Las palabras que puedan quedar encerradas en las piedras de los monumentos o de las ciudades son las de los hombres que trabajaron allí, y también las de los que las habitaron: más aún, el propio sentido del paisaje y su conservación vienen determinados por la presencia del hombre como único interprete de conceptos como ecología o conservación, algo que se pone de manifiesto también en la espantosa devastación que producen los fenómenos propios de la naturaleza. La historia natural, al igual que la vida, están conformadas por éxito y devastación, sin que uno y otra tengan especial preferencia, pues la preferencia se alimenta de otra clase de conceptos. La cuestión de atribuir valores morales al mundo natural es algo muy antiguo, y quizá sea la fuente o el manantial de las primeras religiones, una cuestión que se une a la indefectible noción de mortalidad que define la existencia del hombre frente a la inmanencia de la naturaleza. Esa propia naturaleza está dotada intuitivamente de un carácter “inocente” suponiendo que la inocencia es lo opuesto a la sabiduría. La cuestión es bien otra, ya que la naturaleza no posee ni siquiera algo que pueda definirse como “carácter”, en el sentido personal del término. La cuestión no cae, evidentemente, del lado de las definiciones o de las cualidades, sino del propio análisis de la realidad que el hombre va construyendo, destruyendo, embelleciendo o perjudicando para definir el territorio que habita, interponiendo a su manera recursos, instalaciones y en definitiva todos los testimonios posibles como principal manifestación de su esencia. Entre los artefactos que el hombre produce, uno de los más persistentes y más conspicuamente descritos es el de la arquitectura - entendida aquí en un sentido amplio - es decir, como el conjunto de modificaciones del espacio y del territorio. El espacio se puede modificar de muchos modos, pero en cualquiera de los casos constituye una de las huellas más características que el hombre establece como manifestación física de su propio ser discursivo. También la arquitectura ha demostrado ser una de los fenómenos más persistentes, incluso más que la propia lengua que la origina en su discurso primero antes que pueda ac-cederse a una idea sobre la conformación del material. Es paradigmático que el episodio descrito sobre la Torre de Babel en la Biblia la cuestión de la ambición de los hombres frente a Dios, representada precisamente en una arquitectura, se asimile a la discusión sobre el lenguaje primordial. La cuestión no es baladí, pues el fenómeno de la creación es algo que se concede exclusivamente a los dioses, que por esa razón habitan los territorios a los que los hombres no pueden llegar; territorios de albergue en los que las mitologías sitúan a dioses y demonios, con amplios espacios intermedios donde situar a las divinidades menores, héroes o seres híbridos en los que la coyunda de los dioses con los humanos produce sujetos que alivian el sentido de la mortalidad. El comentario del Génesis también concede un valor a la técnica, al mito de Prometeo y al fuego como creador de excelencia. Frente al progreso prometeico, se postula el valor divino, y la única forma posible de paliar ese progreso es la confusión del lenguaje, pues eso será lo que produzca la dispersión y la falta de acuerdo. La cuestión también puede explicar esa afición tan común por lo canónico en arquitectura que se mantiene a lo largo de grandes períodos, al igual que una gran máquina de inercia. Parece que los conceptos primordiales de la arquitectura basados en elementos simples como el hito, el dintel, lo recto y lo curvo, la rampa o la escalera, y el uso distinto o cualificado que se otorga a la piedra, el ladrillo, la madera o el metal como componentes primordiales del material arquitectónico se haya mantenido a lo largo de muchos milenios sin apenas cambios, al igual que ocurre con las costumbres alimenticias que siguen una progresión ascendente a través de lo crudo, lo asado y lo cocido, hasta obtener distintos grados de refina-miento, pero que siempre se sustentan en la sensación primigenia. El descubrimiento de la arquitectura proviene de un cierto manejo de las dimensiones, y consiguientemente de la geometría. Pero la geometría es cosa abstracta al igual que el lenguaje, de modo que para poder realizar arquitectura se hace necesaria esa capacidad de abstracción primera que luego permite la realización de un dispositivo. La realidad y su número exhiben un divorcio, al igual que las cosas y sus nombres exhiben el suyo, y el análisis numérico es solamente una forma de ver la realidad, una forma rigurosa y exacta – aunque parcial - que solamente representa el modelo ideal al cual la realidad se aproxima en mayor o menor medida: esa aproximación matemática hace que el universo pueda condensarse parcialmente en números, al igual que la realidad puede condensarse en nombres, pero ni el nombre ni el número reflejarán el mundo en toda su complejidad. El número es quizá solamente un medio de describir las cosas, como lo serían las formas puras que responden a una configuración matemática que pueda producirse en teoría en cualquier parte del Universo. Sin embargo, para el ejercicio de la arquitectura es preciso acudir a esa simplificación que exige la visión abstracta del plano como una sección cierta realidad como un corte abstracto del elemento considerado. Con su traza o sin ella, con la propia expresión matemática que lo describa o sin precisarla, esa intuición del plano como elemento generador del espacio es anterior a aquella expresión, al igual que el habla fue anterior a la escritura, pues solamente se produjo a través de ella y como refuerzo y sustituto de la memoria. Existen así abstracciones de la memoria que aparecen derivadas de los signos de la naturaleza aparecidos solamente de forma eventual y fragmentaría: así ocurre con la línea, el cuadrado y el círculo, formas iniciales y abstractas sonsacadas en cierta medida de la observación que dan origen a los primeros signos de la arquitectura primordial, de modo que cuadrados y círculos, elevados a prismas y superficies esféricas o esferoides aparecen en tumbas y edificios elementales de los primeros tiempos mediante una geometría primordial que se superpone al paisaje en el que se inserta. Es cierto también que esas formas se encuentran ya aproximadas en objetos que se encuentran en el medio físico, líneas en extremidades, ramas y miembros; ángulos rectos en algunos cristales que se observan mediante corte o formas circulares en astros y cráteres, pero esa realidad solamente presenta su forma aproximada y no su abstracción pura, de igual modo que el jeroglífico propondrá al ave rapaz para representar la idea de vigilancia y la buena vista, o incluso que la imagen del propio ojo sustituya la idea del Dios que todo lo ve en las culturas anti-guas. La elección fue resuelta, después de muchos intentos y aproximaciones, con la adopción del ángulo recto como un artificio fácil para el replanteo a través del triángulo sagrado 3:4:5 que ya se utilizó para construir las pirámides de Egipto, y que dio origen también a la mayor parte del urbanismo antiguo, coexistiendo con la forma circular primordial en el tipo denominado “tholo”. Aquella trama cuadrangular era uno de los patrones de relleno del espacio más comunes y compactos, y esa fue probablemente la razón por la que en tiempos muy posteriores fuera adoptada como una forma eficaz permanente de organización frente al desorden topológico que procura el conjunto de asociación de plantas circulares. Otra cuestión paradigmática es que esos conceptos primordiales e ignotos - que convergen en el mismo origen de las civilizaciones - se conviertan luego en algo canónico, a través del uso. El canon en sí mismo es algo ideal, como una norma aplicable a objetos de una realidad que ha sido creada solamente como indicio del ca-non, algo abstracto que tiene proporciones estrictas que son siempre las mismas y no obedece a criterios racionales: será absurdo sin embargo buscar el canon griego entre los templos de época como algunos lo hicieron, pues los edificios solamente se aproximan a los ejemplos canónicos y por esa razón se habla del “dórico del Partenón” que es diferente del de Egina o del de Paestum, siendo todos ellos evidentemente dóricos. Sin embargo, esa idea resulta útil al tratadista, al teórico de la arquitectura y al historiador, aun-que solamente refleje una vaga idea de lo que sucede más allá del tratado. Otra cuestión es la sutileza de los ejemplos de arquitectura, y del mismo modo que los cuerpos de los seres vivos jamás son simétricos, aunque respondan a un diseño simétrico general derivado de las condiciones de la división celular, los edificios supuestamente canónicos en los que los especialistas se inspiraron para definir los órdenes clásicos no disponen de esa simetría modular exacta, sino que adaptan un modelo general al lugar siempre cambiante del emplazamiento, es decir, se adaptan con habilidad a la vez que configuran el paisaje en el que se insertan. La luz de los distintos intercolumnios del Partenón es ligeramente distinta, aunque guarde un evidente sentido de simetría axial, de manera que aquellos “órdenes” que formaron la Teoría de la Arquitectura no son más que una bella interpretación sectorial de la arquitectura antigua elaborada por los tratadistas del Renacimiento y, posteriormente, por los neoclásicos. Parece, sin embargo, que ese ansia por el canon como claridad de lenguaje es algo consustancial al desarrollo de la arquitectura, una lingua franca que tiende a evitar la dispersión producida entre los mortales por los dioses antiguos, de modo que si no era posible llegar al cielo de los dioses se procuró que el lenguaje de la Tierra fuera al menos inteligible para poder entenderse entre los hombres. Parece que la estructura del poder siempre requirió de un determinado nivel de organización, y también que las instrucciones se entendieran con claridad: parece que en nuestros tiempos esos antiguos cánones se han sustituido por la obediencia a normas abstractas, dictadas por instituciones también algo abstractas y que tienen nombres divertidos compuestos por siglas, aunque no se conozca bien su virtud. El canon actual está constituido por “normas” que dejan tranquilos a algunos, aunque parece quizá que todo ese entramado formal que sirve como anestesia para el cuerpo social procura también la destrucción de los bosques en formas de montañas ingentes de papel burocrático. Durante muchos siglos las normas fueron otras, en la forma de un canon del cual nadie podía escapar: aún así, mediante la utilización de cánones o sin ellos, la arquitectura prosperó en la civilización desde los primeros refugios cavernarios o los abrigos primigenios y de ese modo fue configurando la realidad, es decir, el paisaje. Como antes se dijo, ese es un viaje de ida y vuelta en el cual ambos se confundían y subsumían: el manejo de las formas y lenguajes de la arquitectura posibilitaría con el tiempo la distinción entre el campo en donde reina el caos y la ciudad, en donde reina teóricamente el orden, creando un divorcio que duraría milenios y que aún persiste. Esa oposición generaría también una forma de paisaje y una serie de usos simbólicos y sagrados de los elementos de la arquitectura - como son puertas y murallas - que se han mantenido conceptualmente aunque hoy las ciudades ya no posean murallas físicas, ni puertas que se cierran con la llegada de la noche. En ese sentido, la arquitectura ha podido definir el paisaje, entendiendo la arquitectura no solamente como los edificios en sí, sino como el hecho de la manifestación del hombre sobre el territorio, de modo que no podrá hablarse de paisaje sin su arquitectura, del mismo modo que no puede hablarse de paisaje sin hombres. Por esta razón, la Tesis habla sobre Arquitectura y Paisaje, pero más particularmente sobre el hecho de la arquitectura en la definición del paisaje, es decir, de como los hechos arquitectónicos van a determinar o no la cualidad y la calificación de un paisaje. Deberá partirse en primer lugar de una definición de lo que se entiende y se ha entendido comúnmente por paisaje: igualmente, y habida cuenta del contexto en el que sitúa el propio trabajo de tesis, la cuestión solamente se circunscribirá a lo que se entiende como cultura occidental, pues el desarrollo de la civilización presenta siempre un color local que hace que el análisis de un fenómeno de esta envergadura tenga distintas connotaciones en las distintas áreas de civilización. De igual modo, y habida cuenta también que el paisaje se construye a través de todas las manifestaciones culturales, se hará a veces necesario indagar en otras disciplinas no arquitectónicas para comprender el alcance de algunos casos en los cuales los restos arquitectónicos han desaparecido, o en los que subsisten escasas trazas. Una definición tan amplia de la Arquitectura llevaría a escribir un relato sobre toda la cultura occidental y por ese motivo solamente se han esbozado ideas sobre la aparición de esos signos sobre el paisaje basados en elementos antiguos y primigenios que se repiten con insistencia y van dando lugar al variado repertorio de la arquitectura occidental cómo conformación de ideas sobre el me-dio y sobre el mundo que se percibe y se habita. ABSTRACT About Architecture in defining Landscape. Abstract Architecture is commonly manifested in buildings as a fact of reality that has always a contemporary character and that should be the highest value of an art that does not distinguish between ancient and modern, to affect the present and be contemporary as experience. Objects are inserted irremediably in their midst and even sometimes come to define it: thus, architecture and landscape, appear sometimes confused with differences difficult to determine. However, the term "landscape" is relatively modern and is derived from certain graphical or pictorial representations produced in the West in some subsequent period to the Renaissance. The fact that a word can be written or quoting does not mean that the reality that can not be answered, because the writing is only a mean of expression, and it is obvious that there are other and perhaps older equally important, because the writing itself is nothing more than the reflection of a phenomenon that has occurred before. It thus appears that the testimony of reality is given by different contexts in what is called "culture", so that cultures can have aspects of great interest by many different expression systems without this necessarily have to pass through the filter of alphabet and writing. Under the initial findings, it appears that the question of writing originally had a character and finding accounting entries, and it can not be established with certainty whether some used writing as the support appropriate to refer myths or stories, because archaeology has provided only fragmentary evidence. Another issue that raises questions is what can properly be defined as writing, it seems that the oldest modes are reduced to writing pictograms are still indecipherable. Languages and place names are also very useful tools for diving in the past, but still questions remain in the scriptures that come from the primordial representations: either it is very well defined what the own writing in its origins: the beginnings seem to feed on immediate intuitions of representation, which would evolve representing reality that urgent and immediate control or supply which is then inherited into fragments. It is noteworthy, however, that this huge set of graphics agreements was subject to the word and the disappearance of cultures determined also the consequent disappearance of their languages, and those signs - whether or not they write - have passed definitively to dark areas of knowledge. Writings supposed also the capacity of abstraction graph differentiates the word and the thing, and it is possible that the reason to carry this discovery was simply that of an economy of signs, for writing and language are limited by definition, while the things of the world are innumerable: no language contains all words to describe all that may appear. Apparently, that's why there is a localism - a specific term that refers to something that exists in one place and not in others - in regards to name the thing and also the source of paradigm among peoples are considered primitive and civilized. It should be noted also that transposition occurs in both directions, so that the most isolated cultures also incorporate concepts that lack a consistent rational explanation. Mythologies are eternal and therefore serve to explain realities that lack an understanding achievable and also pretty clear that languages happen to be an enigma, as an autonomous reality that is enclosed and explains itself. It also seems that the first to write consonants were isolated western Semitic peoples from the shores of the Mediterranean, peoples who created a syllabic alphabet came to be used even by tartesios in southern Iberia as the first alphabet in Western Europe. It is clear that the term "landscape" has always nurtured representations, either written or artis-tic, but it is also clear that these representations are assumed arising from belief in an idea of landscape as something that is represented in itself, as the image of a reality external located outside the individual. That is an important fact because the landscape requires remoteness of the thing, so that the actor - even knowing insert in landscape - is unable to perceive from within. The landscape is just as in a theatre or a performance: the actors are aware of their role and their possible role, but they are not the ones who can really enjoy the efficiency or the presence of the work itself, as part of it. The idea comes from an external landscape reading the principles of players in the drama, so if you want to be a critic of the landscape should leave the actual representation to watch the spectacle from a safe distance, finally external. Thus, the first finding of fact of the landscape appears as a reality constructed by objects and characters, but above all, a reality constructed by looks. Also noteworthy given the readings of specialists to the external reference - art if it could be - on the term "landscape", so no specialized literature on the subject always ends in treatises on painting or poetry. It seems however that the man and his landscapes are inseparable realities from the very onset of the species, so bring the issue into terms exclusively aesthetics seems a partial position. Man and environment have always been a single unit, but that unit has become synonymous with certain cases predation and destruction. Nevertheless, this destruction also creates a landscape as desolation that results from proper task of man elements that also have substantial contents of memory in industrial landscapes as a time of pre-automation history and globalization of current life. Perhaps the most interesting from a theoretical point of view is precisely that quality of landscape as something external produced by the viewer in a strange time of membership, a look that is not only aesthetic but sympathetic, joyful, active concept or analytical - because there are so many ways to look as subjects - it may not be precisely defined that contemplation rather than in terms that reach one's individuality. In poetic terms, it could also be set as the set of individual gazes also create a structure that makes this landscape is valued and understood, so from that point of view that landscape is a collective creation. With respect or as a predator, man has settled in his environment and in doing so has left traces in the landscape itself that make take a certain significance. Naturally, there is a theory that distinguishes what is "home" and what is "nature" providing for the first notion of the exclusive territory in which man has no aesthetic role. I tried many times to understand this position, without understanding the approach that supports: it seems that the vision of the thing is always humane, even in the "virgin" or untouched areas, as the vision itself makes the object modified in its own perceptual unit, creating a curious indeterminacy leading to the known misunderstandings between real image and representation. Indeed, the vision of the thing requires a culture and means that the report, so that a text, a picture, a description or photograph will be humanized by the very fact of being informed, as this provides a way a priori. Thus, the landscape provides a function that sets both aspects of a potential landscape as described aspects of the landscape and can only talk about the potential of the final state of the landscape, while the landscape remains humanized by the observer himself. This question forces to choose a definition of remote landscape budgets purely cultural, so there is another way for research to contemplate that physical reality in terms of the coordinates of the man who inhabits gifted content corresponding to that revelation. Far from the positions of the geomorphology, the term "landscape" and involve a certain condition by contemplation of a subject for which the show is humanized in the act. It should also consider, in the light of the above, if it is not true that all landscapes require that humanized condition, because although they are not inhabited they are always occupied by the look that dwells, like a stage without audience produces no consistent effect. From there the coordinates where this work sets the presence of architecture in defining landscape, a premise which seems to come from the beginning given lie, because that same look is already giving the viewer a sense of order and hierarchy to contemplation, qualities that are at the basis of all architectural activity, in fact the very definition of "natural monument" - in itself a contradiction - expresses this conflict, which has a phenomenon of admiration and overlap between culture and nature as concepts faced since its inception. The conclusion on the dilemma proposed in the thesis has not been another to assume that these two realities are the culture and landscape have overlapped since the beginning of man time forming a pair. It has been said before that the process of invasion of the territory by man is significant, and that meaning is the originating autonomous creation that is isolated as an abstract concept of nature, taking them as working material, and establishing a conceptual opposition in reality and punched by the man who comes to oppose representing the closed and unknown to the enigma of the world interpreted. The question of the significance of the man on the land is subsumed in the creation of products that remain and are testimony of their own culture, so that the trace amount that the man leaves the territory contributes most to the qualification landscape as a concept. That brought into any landscape - by the mere fact of being and being well defined - is already cultural, as it is configured by culture products. The words that can be locked in the stones of the monuments or cities are those of the men who worked there, and also of those who inhabited: even more, the sense of the landscape itself and its conservation are determined by the presence of man as the sole interpreter of concepts such as ecology or conservation, something which becomes manifest also in the awful devastation that produce the phenomena of nature. The natural history, like life, are shaped by success and devastation without special preference, the preference is used for feeding on other kinds of concepts. The question of moral values attributed to the natural world is very ancient, and may be the source or the source of the first religions, an issue that joins the unfailing notion of mortality that defines the existence of man against immanence of nature. That nature is endowed intuitively an "innocent" character assuming that innocence is the opposite of wisdom. The other issue is well, since nature does not even have what is defined as "character" because that is something that serves to qualify beings, but not objects. The question does not fall clearly on the side of the definitions or qualities, but from the analysis of the reality that man is building, destroying or damaging to define the territory, interposing his way resources facilities and possible witness as the main manifestation of its essence. Among the artifacts that man produces one of the most persistent and most conspicuously disclosed is architecture as a way of modification of space and territory. The space can be modified in many ways, but in either case is one of the most characteristic traces that man establishes as a physical manifestation of his own discourse being. Architecture has also proven to be one of the most persistent phenomena, even more than their own language that originates in his speech first. The paradigm wrote in the episode described on the Tower of Babel in the Bible shows the question of ambition of men before God - represented precisely in architecture - is assimilated to the discussion about the primary language. The issue is not trivial, since the phenomenon of creation is something that is granted exclusively to the gods, for that reason inhabit the territories to which men can not reach; territories where the hostel located mythologies gods and demons, with large gaps where to place the minor deities, heroes or hybrid beings where the yoke of the gods with human subjects produces relieving sense of mortality. The commentary on Genesis also gives a value to the art, the myth of Prometheus and fire as creator of excellence. In front of promethean progress, divine value is postulated, and the only possible way to alleviate this progress is the confusion of language, because that is what will produce the dispersion and lack of agreement. The issue may also explain such a common passion for the canonical architecture maintained throughout long periods, like a great machine inertia. It seems that the main concepts of architecture based on simple elements like milestone, lintels, straight and curved stairs or ramps, or other qualified and used are granted to the stone, brick, wood or metal as the primary components of the architectural material maintained throughout many millennia are almost unchanged, as is the case with the eating habits that follow a progression through the raw, the cooked and roasted or fried until obtain different degrees of refinement, but always are based on the primal feeling. The discovery of the architecture comes from a management dimensions, and consequently the geometry. But the geometry is abstract thing like the language so that to make architecture that first absorption capacity which then allows the realization of a device is necessary. Reality and its number exhibit a divorce, like things and their names displayed his; numerical analysis is just one way of seeing reality, rigorous and accurate - though partial - only represents the ideal model to which reality is coming to a greater or lesser extent: the mathematical approach makes the universe can condense on numbers, like reality may condense on names, but neither the name nor the number will reflect in all its complexity. The number is only a means of describing things, such as the pure forms that match setup a mathematical theory that occurs anywhere in the universe. However, for the practice of architecture is necessary to go to the simplification that requires abstract view of a section plane of reality, as an abstract element considered cutting. With its trace or not, with the mathematical expression that describes what or without clarify, this intuition of the plane as a generator of space predates his own expression, like speech preceded the writing, which only occurred through it and as reinforcement and replacement of memory. There are abstractions of memory displayed on the signs of nature only on casual and fragmentary, such as line, square and circle: those initials and abstract forms located in abstraction give rise to the first signs of primordial architecture, so that squares and circles, lifting two prisms and spheroids or spherical surfaces appear in tombs and elementary buildings the first few times, and that primordial geometry overlaps the landscape in which it is inserted. It is also true that these forms are approximate objects found in the physical environment, limb lines, branches and limbs; straight in some crystals angles observed by cutting or circular in stars and craters forms, but only the approximate shape and not its abstraction, just as the hieroglyphic of a falcon to represent the idea of surveillance presents the good view, or even the image of the eye itself replace the idea of the all-seeing God. The election was resolved, after many attempts and approaches, with the adoption of the right angle as an easy trick for stake through the sacred triangle 3:4:5 already used to build the pyramids of Egypt, and also gave rise to most of the old urbanism tend coexist with the primary circular form type called "Tholo". That frame homer was one of the fill patterns of common and compact space, and that was probably the reason why in much later times was adopted as a permanent effective form of organization against the topological disorder that seeks the set of association circular plants. Another issue is that these paradigmatic and unknown primary concepts - that converge at the origin of civilizations - then become something canon, through use. The canon itself is something ideal, as a rule for objects of a reality that has been created only as an indication of the ca-non, something abstract that has strict proportions are always the same and not due to rational criteria: be absurd however seek the Greek canon among the temples of time as some did, because the buildings only approximate the canonical examples and for that reason we speak of "doric from Parthenon" which is different from Aegina or Paestum, being all clearly doric. However, this idea is useful to scholar, the architectural theorist and historian, although it reflects only a vague idea of what happens beyond the book. Another issue is the subtlety of the examples of architecture, just as the bodies of living beings are never symmetrical, even if they involve a general symmetrical design derived from the conditions of cell division, the supposedly canonical buildings where specialists were inspired to define the classical orders do not have that exact modular symmetry, but a general model adapted to the ever changing location of the site shaping the landscape in which they are inserted. The light of the various bays of the Parthenon is slightly different, but keep a clear sense of axial symmetry, so that those "orders" that formed the theory of architecture are just a beautiful sectoral interpretation of ancient architecture developed by writers of the Renaissance and later by neoclassical. It seems, however, that craving for clarity of language canon as is inherent to the development of architecture, a lingua franca that tends to avoid scattering among mortals by the ancient gods, so if it was not possible the heaven of the gods sought the language of the Earth was at least intelligible to be understood. Power structure has always required a certain level of organization, and the instructions are clearly understood: it seems that in our times these ancient canons were replaced by obedience to abstract rules, issued by institutions also somewhat abstract and have funny names made up acronym, although not well known virtue. The current canon consists of "rules" that leave some quiet, although it seems that maybe all that interweaves-do formally serving as anaesthesia for the social body also seeks the destruction of forests in forms of huge mountains of bureaucratic paper. For many centuries were other rules, in the form of a canon which no one could escape: still using royalties or without them, civilization flourished in architecture from the earliest cave shelters or shelters and the primordial reality was setting mode in landscape. As noted above, this is a return trip in which both confused and subsumed: the management of forms and languages of architecture over time would allow the distinction between the field where chaos reigns and city, where order reigns theoretically creating a divorce that lasted millennia and still persists. This opposition also generate a form of landscape and a series of symbolic and sacred uses of architectural elements - such as doors and walls - which have remained conceptually although today the cities no longer having physical walls or doors close during the night. In this sense, the architecture could define the landscape, architecture is not only understood as the buildings themselves, but the fact of the manifestation of the man on the premises, so you can not speak without his landscape architecture, the same so we can not speak of landscape without men. For this reason, the thesis discusses architecture and landscape, but more particularly to the fact of architecture in defining landscape, as the facts of architectural or not will determine the quality and qualification of a landscape. One should begin first a definition of what is understood and has been commonly understood by landscape: equally, and given the context in which it places the own thesis work, the issue only be limited to what is understood as western culture, for the development of civilization always has a local colour that makes the analysis of a phenomenon of this magnitude have different connotations in different areas of civilization. Similarly, and given also that the landscape is constructed through all cultural manifestations, will sometimes necessary to investigate other non-architectural disciplines to understand the scope of some cases in which the architectural remains have disappeared, or the remaining few traces. Such a broad definition of architecture take to write a story about all of Western culture and for this reason only been sketched ideas about the appearance of these signs on the landscape based on ancient and primitive elements are repeated insistently and leading the varied repertoire of Western architecture shaping ideas about how the media and the world is perceived and inhabited.

A programmably loadable control store for the Burroughs D-machine /

Originally presented as the author's thesis, University of Illinois at Urbana-Champaign.