Gestão ambiental aplicada a prevenção, controle e recuperação de erosão linear acelerada no município de Ipeúna-SP

The erosion is a natural process of detachment, transport and deposition of soil and rock particles from one place to another. Human activities with no previous planning may accelerate this process, causing several damages to the environment and to society. In order to control the acceleration of these erosion processes caused by humans, prevention and improvement initiatives emerge. Regarding works which interfere directly in some of the natural resources, these initiatives must respect the intrinsic physical properties of the area of interest, if they aim to obtain effective results. Based on this scenario, this work proposes a few methods of accelerated linear erosion prevention, control and recovery in a specific area of the municipal district of Ipeúna (SP). For that matter, this study is based on a method of physiographic compartmentalization of the area, considering and integrating soil, relief, geology and the use and land cover properties of the study area. Plus, a flowchart with general orientations regarding management of eroded areas was produced, focused on the control and recovery of linear erosion. The result demonstrates the importance of careful erosion control, respecting the physical properties of each physiographic unit. The vegetative and mechanical conservationists methods, and the discipline of water flow, have found wide applicability in the study area.

Comparação da eficiência térmica de trocadores de calor no laboratório de sistemas térmicos da Faculdade de Engenharia

This work aims to verify and compare the efficiency of heat exchangers used in the thermal systems laboratory at Faculdade de Engenharia do Campus de Guaratinguetá - UNESP. Basically, it has been studied two types of heat exchangers: plate type, operating in parallel flow and counter-flow, shell and tube type and also operating in parallel flow and counter flow. Initially it has been presented the didactic equipment and procedures for use of these heat exchangers in the proposed experiments. With the results obtained from the experiments, comparisons were made in order to define the behavior of the heat exchangers regarding some variables. In the study, one comes to the conclusion that the results from shell and tube type of heat exchanger, used in the thermal systems lab, are superior in all conditions analyzed

Análise comparativa de técnicas de recuperação ambiental em áreas degradadas no município de Bofete/SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da biodegradação de tolueno por fungos isolados de ambientes associados ao petróleo

Spills can ocurr during oil productive chain and contaminate various environments due to the toxicity of monoaromatics hidrocarbons. Toluene stands out for being agressive to the nervous sistem and teratogenic, with high mobility and solubility in water, which facilitates environmental impact. Studies show that fungi are potential aromatic compounds assimilators, encouraging new researches about its use on the recovery of contaminated sites. This study aimed to select and characterize fungus with potential for biorremediation of toluene. 50 fungi were selected of the Collection of Microorganisms of Interest for Oil Gas and Biofuels, of UNESP Rio Claro, all of which were isolated from sites contaminated with monoaromatic hydrocarbons. Two trials were realized to select the microorganism with greater potential. The first test evaluated fungal growth under toluene saturated atmosphere. 24 fungi were chosen because its greater biomass production to participate in the next trial, the degradation in plates test, where the blue redox agente, DCPIP, indicates the degradation reaction, turning colorless. From this teste was possible to select one isolate which showed higher growth and stronger medium discoloration as the microorganism with the greatest potential to assimilate toluene. The Trichoderma cf. koningii had its potential evaluated through gas cromatography. The experiment proved the efficiency of the methodology, with positives results from the method validation and the effectiveness demonstrated of the LA-PHA-PACK bottles to prevent the volatilization of toluene during the 21 days of experiment. Being reliable its use for monitoring toluene decay associating it with degradation. This results are important because there aren't many methodologies and vials efficient to the purpose of this work. In the present study the degradation rates demonstrated no significant decay of the concentration of hydrocarbon. That may be related to the...

Recuperação de informação de música e dados ID3: possíveis aplicações

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeitos da imersão em água fria na recuperação pós-exercício: análise conjunta de parâmetros clínicos, funcionais, metabólico e autonômico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Secagem de biomassa bacteriana: rendimento, recuperação e produtividade

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento de procedimentos e métodos analíticos no campo forense aplicando os princípios da química verde

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Duloxetina para melhoria na qualidade de recuperação anestésica em histerectomia abdominal

Pós-graduação em Anestesiologia - FMB

Alterações nuricionais em casca e polpa de cenoura decorrentes de diferentes métodos de cozimento

The aim of this study was to verify the carrot cooking most suitable method to minimize nutrient losses. Carrot peel slices were subjected to pre cooking tests that were initiated with 0.5 min of duration and then increased in 0.5 min successively. The carrot pieces texture was monitored during the pre tests so all would havethe same texture independent of the type of cooking. The degree of softennes was evaluated by pressuring the pieces between the toes. The carrot pulp and pell were subjected to four types of heat treatment (pressure, immersion, microwave, and steam), after that they were pounded with a food processor and stored at -18 ºC. The nutritional analyses were as follow: The evalu determination of proteins, lipids, fibers, sugars reducers, total of ascorbic acid content and minerals (iron, calcium, zinc, magnesium, potassium, phosphorus, and calcium). The analyses were accomplished with fresh carrot and after cooking with the different methods. The peel of the carrot presented as amounts of proteins, lipids, fibers percentages, sugars reducers, total and ascorbic acid content equivalent to the pulp. In addition, the minerals content was superior in the peel in relation to the pulp, presenting respective percentages of 38,10%, 95,12%, 47,04%, 58,88%, 70,27% and 21,27%. There were nutrient losses in relation to the raw vegetable, when the carrot pieces were submitted to the different cooking methods. The methods of steaming and microwave had lower nutritional losses.

Estudo clínico randomizado e duplo cego comparando dois métodos de escleroterapia para veias reticulares e telangiectasias em membros inferiores

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dissolução redutiva de minério de ferro por Acidithiobacillus ferrooxidans para a recuperação de metais de interesse econômico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Identificação taxonômica e análise conexionista de bactérias heterotróficas e fatores abióticos de ambientes lóticos sob influência de efluentes do refino no petróleo

This study used a multi-analytical approach based on traditional microbiological methods for cultivation and isolation of heterotrophic bacteria in the laboratory associated with the molecular identification of the isolates and physicochemical analysis of environmental samples. The model chosen for data integration was supported by knowledge from computational neuroscience, and composed by three modules: (i) microbiological parameters, contemplating taxonomic data obtained from the partial sequencing of the 16S rRNA gene from 80 colonies of heterotrophic bacteria isolated by plating method in PCA media. For bacterial colonies isolation were used water samples from Atibaia and Jaguarí rivers collected at the site of water captation for use in effluent treatment, upstream from the entrance of treated effluent from the Paulínia refinery (REPLAN/Petrobras) located in the Paulínia-SP municipality, from the output of the biological treatment plant with stabilization pond and from the raw refinery wastewater; (ii) chemical parameters, ending measures of dissolved oxygen (DO), chemical oxygen demand (COD), biochemical oxygen demand (BOD), chloride, acidity CaCO3, alkalinity, ammonia, nitrite, nitrate, dissolved ions, sulfides, oils and greases; and (iii) physical parameters, comprising the pH determination, conductivity, temperature, transparency, settleable solids, suspended and soluble solids, volatile material, remaining fixing material (RFM), apparent color and turbidity. The results revealed interesting theoretical relationships involving two families of bacteria (Carnobacteriaceae and Aeromonadaceae). Carnobacteriaceae revealed positive theoretical relationships with COD, BOD, nitrate, chloride, temperature, conductivity and apparent color and negative theoretical relationships with the OD. Positive theoretical relationships were shown between Aeromonadaceae and OD and nitrate, while this bacterial family showed negative theoretical...

Identificação taxonômica e análise conexionista de bactérias heterotróficas e fatores abióticos de ambientes lóticos sob influência de efluentes do refino no petróleo

This study used a multi-analytical approach based on traditional microbiological methods for cultivation and isolation of heterotrophic bacteria in the laboratory associated with the molecular identification of the isolates and physicochemical analysis of environmental samples. The model chosen for data integration was supported by knowledge from computational neuroscience, and composed by three modules: (i) microbiological parameters, contemplating taxonomic data obtained from the partial sequencing of the 16S rRNA gene from 80 colonies of heterotrophic bacteria isolated by plating method in PCA media. For bacterial colonies isolation were used water samples from Atibaia and Jaguarí rivers collected at the site of water captation for use in effluent treatment, upstream from the entrance of treated effluent from the Paulínia refinery (REPLAN/Petrobras) located in the Paulínia-SP municipality, from the output of the biological treatment plant with stabilization pond and from the raw refinery wastewater; (ii) chemical parameters, ending measures of dissolved oxygen (DO), chemical oxygen demand (COD), biochemical oxygen demand (BOD), chloride, acidity CaCO3, alkalinity, ammonia, nitrite, nitrate, dissolved ions, sulfides, oils and greases; and (iii) physical parameters, comprising the pH determination, conductivity, temperature, transparency, settleable solids, suspended and soluble solids, volatile material, remaining fixing material (RFM), apparent color and turbidity. The results revealed interesting theoretical relationships involving two families of bacteria (Carnobacteriaceae and Aeromonadaceae). Carnobacteriaceae revealed positive theoretical relationships with COD, BOD, nitrate, chloride, temperature, conductivity and apparent color and negative theoretical relationships with the OD. Positive theoretical relationships were shown between Aeromonadaceae and OD and nitrate, while this bacterial family showed negative theoretical...

¿Qué Método Utilizar Para Estimar la Temperatura estática de una formación de Petróleo?

Conocer la temperatura estática de una formación de petróleo es importante a la hora de evaluar y terminar un pozo. Existe una gran variedad de métodos para la determinación de esta temperatura. Cada método utiliza hipótesis y simplificaciones distintas que llevan a estimaciones diferentes, en algunos casos bastante alejadas del valor real. Esto hace difícil saber qué método utilizar. En este trabajo, se aplican los métodos de cálculo más comunes - Horner (HM), flujo radial y esférico (SRM), de las dos medidas (TLM) y de fuente de calor cilíndrica (CSM)- a cuatro pozos distintos. Se describe cómo aplicarlos en casos reales. Se presta especial atención a establecer los datos necesarios en cada caso: propiedades termo-físicas y número de medidas, y se proporcionan criterios para estimarlos en caso de no conocer su valor real. Como conclusiones a este trabajo se presentan una serie de pautas que permiten seleccionar el método de cálculo más conveniente en función de la información de que se disponga