Reproductive variability of the Amazon River prawn, Macrobrachium amazonicum (Caridea, Palaemonidae): influence of life cycle on egg production

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ocurrence of male morphotypes of Macrobrachium amazonicum (Caridea, Palaemonidae) in a population with an entirely freshwater life cycle

This study records, for the first time, the occurrence of all four male morphotypes in a population of Macrobrachium amazonicum from a continental environment, with an entirely freshwater life cycle. The specimens studied came from the Tietê River, state of São Paulo, Brazil, and were collected in a lotic environment downstream from Ibitinga Dam. This population was compared with other continental populations, including a population from the dam itself, collected in a previous study. Four samples of 30 minutes were taken monthly, using a trap, from January to April 2011. Each male specimen was measured with respect to seven body dimensions as follows: carapace length (CL), right cheliped length (RCL), dactyl length (DCL), propodus length (PPL), carpus length (CRL), merus length (ML) and ischium length (IL). The relative growth was analyzed based on the change in growth patterns of certain body parts in relation to the independent variable CL. The four male morphotypes proposed for the species were found using morphological and morphometric analyses. Different biological characteristics were found between the populations studied. The male population of the lake of Ibitinga and from Pantanal presented mean sizes and number of morphotypes lower than the population studied here. These differences seem to be closely related to ecological characteristics of the environments inhabited by these populations. Our results supported the hypothesis that coastal and continental populations of M. amazonicum belong to the same species.

Life cycle of Cosmolaelaps jaboticabalensis (Acari: Mesostigmata: Laelapidae) on Frankliniella occidentalis (Thysanoptera: Thripidae) and two factitious food sources

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Life cycle of Raoiella indica (Acari: Tenuipalpidae) on ornamental plants, mostly Arecaceae

The red palm mite, Raoiella indica Hirst, has been primarily found associated with coconut and musaceous plants in the New World. However, it has also been recorded on several other palms, heliconiaceous and zingiberaceous species. This study was conducted to evaluate the suitability of different botanical families on which R. indica has been collected in the field and of arecaceous plants of the natural vegetation of the neotropics. In total, ten species of Arecaceae as well as Heliconia psittacorum [Heliconiaceae] and Alpinia purpurata [Zingiberacae] were evaluated, using coconut as a control. The study was carried out under controlled conditions (29 +/- A 0.5 A degrees C, 60 +/- A 10 % RH and photoperiod 12 h of light). Raoiella indica was able to complete immature development only on coconut, Adonidia merrillii, Ptychosperma macarthurii, H. psittacorum and A. purpurata. Duration of the immature phase (egg-adult) ranged between 21.5 days on coconut to 34.1 days on A. purpurata. Longevity was at least 50 % greater and oviposition at least 38 % higher on coconut than on other plants. Intrinsic rate of increase (r(m)) was higher on coconut (0.166) and A. merrillii (0.042), but negative on the other two plant species. Raoiella indica could not reach adulthood on any of the other ten arecaceous species considered in the study. The results suggested R. indica to be a threat to A. merrillii in addition to coconut, but not to other evaluated plants. However, complementary studies should be conducted to investigate whether the experimental procedures adopted in this study could not have prevented the mite from a better performance than it could have been under field conditions, especially in relation to Mauritia flexuosa, one of the dominant arecaceous plants in South America.

Life cycle assessment applied to municipal solid waste management: a case study

This study analyzes the environmental performance of the Municipal Solid Waste Management System (MSWMS) of Piedade, São Paulo, from a systemic perspective. A life cycle assessment (LCA) technique was applied according to an attributional approach to evaluate both the current operational situation and different prospective scenarios, which were devised based on the application of targets for recycling dry and wet waste suggested by the pre-draft version of the Brazilian Plan for Solid Waste. The life cycle impact assessment method EcoIndicator 99, in association with normalization and weighting procedures, was used to conduct the analysis. It was observed that the adoption of goals of 30%, 50% and 70% for recovering of the recyclable dry waste, resulted in improvement of the environmental performance of the waste management system under analysis, respectively of 10%, 15% and 20%. It was also possible to detect an evolution in the order of 54% in reducing impacts resulting from the adoption of targets for composting. LCA proved to be effective for the evaluation of the environmental performance of MSWMS-Piedade. However, for future evaluations, the attributional approach should be replaced by the methodological practice of substitution to enable the avoided burdens to be considered in estimations of the environmental performance municipal solid waste management systems.

Life cycle and reproductive traits of marine podonids (Cladocera, Onychopoda) in a coastal subtropical area

We studied the temporal distribution and reproductive biology of marine podonids during two consecutive years off Ubatuba, southeast coast of Brazil. Podonid specimens and their eggs and embryos were counted, measured and classified into categories. Pseudevadne tergestina was the most abundant species, and was more abundant in surface layers, in warm seasons, when the water column was stratified because of bottom intrusions of the cold and nutrient-rich South Atlantic Central Water (SACW) onto the inner shelf. Evadne spinifera had a similar temporal and vertical distribution, but with lower abundance and frequency. Pleopis schmackeri did not show a clear seasonal distribution, but preferred bottom layers. Pleopis polyphemoides and Podon intermedius occurred in low abundances, and only under SACW influence. Parthenogenetic females were dominant among all podonid species. Gamogenetic females of P. polyphemoides and P. intermedius were observed, but males of neither species occurred. This suggests that in tropical and subtropical regions, P. tergestina, E. spinifera and P. schmackeri reproduce through parthenogenesis during most of the year.

Methodology of CO2 emission evaluation in the life cycle of office building facades

The construction industry is one of the greatest sources of pollution because of the high level of energy consumption during its life cycle. In addition to using energy while constructing a building, several systems also use power while the building is operating, especially the air-conditioning system. Energy consumption for this system is related, among other issues, to external air temperature and the required internal temperature of the building. The facades are elements which present the highest level of ambient heat transfer from the outside to the inside of tall buildings. Thus, the type of facade has an influence on energy consumption during the building life cycle and, consequently, contributes to buildings' CO2 emissions, because these emissions are directly connected to energy consumption. Therefore, the aim is to help develop a methodology for evaluating CO2 emissions generated during the life cycle of office building facades. The results, based on the parameters used in this study, show that facades using structural glazing and uncolored glass emit the most CO2 throughout their life cycle, followed by brick facades covered with compound aluminum panels or ACM (Aluminum Composite Material), facades using structural glazing and reflective glass and brick facades with plaster coating. On the other hand, the typology of facade that emits less CO2 is brickwork and mortar because its thermal barrier is better than structural glazing facade and materials used to produce this facade are better than brickwork and ACM. Finally, an uncertainty analysis was conducted to verify the accuracy of the results attained. (C) 2011 Elsevier Inc. All rights reserved.

Life cycle assessment of sugarcane ethanol and palm oil biodiesel joint production

Sugarcane (Saccharum spp.) and palm tree (Elaeis guianeensis) are crops with high biofuel yields, 7.6 m(3) ha (1) y(-)1 of ethanol and 4 Mg ha(-1) y(-1) of oil, respectively. The joint production of these crops enhances the sustainability of ethanol. The objective of this work was comparing a traditional sugarcane ethanol production system (TSES) with a joint production system (JSEB), in which ethanol and biodiesel are produced at the same biorefinery but only ethanol is traded. The comparison is based on ISO 14.040:2006 and ISO 14044:2006, and appropriate indicators. Production systems in Cerrado (typical savannah), Cerradao (woody savannah) and pastureland ecosystems were considered. Energy and carbon balances, and land use change impacts were evaluated. The joint system includes 100% substitution of biodiesel for diesel, which is all consumed in different cropping stages. Data were collected by direct field observation methods, and questionnaires applied to Brazilian facilities. Three sugarcane mills situated in Sao Paulo State and one palm oil refinery located in Para State were surveyed. The information was supplemented by secondary sources. Results demonstrated that fossil fuel use and greenhouse gas emissions decreased, whereas energy efficiency increased when JSEB was compared to TSES. In comparison with TSES, the energy balance of JSEB was 1.7 greater. In addition, JSEB released 23% fewer GHG emissions than TSES. The ecosystem carbon payback time for Cerrado, Cerradao, and Degraded Grassland of JSEB was respectively 4, 7.7 and -7.6 years. These are typical land use types of the Brazilian Cerrado region for which JSEB was conceived. (C) 2012 Elsevier Ltd. All rights reserved.

A surrogate life cycle of Amblyomma ovale Koch, 1844

As ticks spend most of their time off-host, the environment is a major selective force of these parasites. In fact, human impact on landscapes has favored a minority of tick species which became well-known pests. However, this is an ongoing process and novel pests may arise. We herein report a surrogate life cycle of a neotropical tick species. Amblyomma ovate, and which may be related to an increased risk of human rickettsiosis. Under natural conditions, adults of this tick species feed on carnivores and exhibit non-nidicolous ambush behavior, whereas larvae and nymphs feed on small rodents and birds. In an anthropized spot within an Atlantic rainforest reserve of Brazil, an A. ovate population exhibited a nidicolous behavior with all 3 tick stages feeding on the dog. This dog's infestation was outstandingly high, and it displayed the highest anti-Rickettsia titers and harbored Rickettsia-infected ticks. (c) 2012 Elsevier GmbH. All rights reserved.

Life-cycle and host preference of Amblyomma ovale (Acari: Ixodidae) under laboratory conditions

This study evaluated for the first time the life cycle of Amblyomma ovale in the laboratory. For this purpose, larvae and nymphs were exposed to Gallus gallus (chickens), Cavia porcellus (guinea pigs), Rattus norvegicus (wistar rats), Oryctolagus cuniculus (domestic rabbits), Calomys callosus (vesper mouse), and Didelphis albiventris (white-eared opossum). Nymphs were also exposed to Nectomys squamipes (South American water rat). Adult ticks were fed on dogs. The life-cycle of A. ovale in laboratory could be completed in an average period of ca. 190 days, considering prefeeding periods of 30 days for each of the parasitic stages. Vesper mice were the most suitable host for A. ovale larvae, whereas water rats were the most suitable host for A. ovale nymphs. Our results, coupled with literature data, strongly indicate that small rodents have an important role in the life history of A. ovale. Chickens (the only avian host used in the present study) showed to be moderately suitable hosts for subadult A. ovale ticks, indicating that wild birds might have a secondary role in the life history of A. ovale. Domestic dogs showed to be highly suitable for the adult stage of A. ovale, in agreement with literature data that indicate that the domestic dog is currently one of the most important hosts of A. ovale adult ticks in Latin America.

Analisi del fine vita degli pneumatici attraverso una metodologia Life Cycle Assessment (LCA)

This study aims to show the scope of environment impact due to tyre treatments. The study scrutinises a firm’s case, Marangoni S.p.A, which is one of the first pneumatics treatments firm with emphasis on disposed and recostructed exhausted pneumatics. In particular those pneumatic’s treatments are two: reconstruction (30% of the whole amount of the pneumatics given) and incineration (70% of the whole amount of the pneumatics given). With LCA methods (EcoIndicator 99, EPS 2000, EDIP 97, IMPACT 2002) it has been possible to value the impact on the environments in terms of human health, ecosystem quality and resources. In addition, comparison with the principal process and subsidiary processes within the main one has brought to highlight how some results could be understood in different way. This interpretation should bring politics and socials network to take decision in order to save our planet.

Valutazione di impatto ambientale di un gruppo elettrogeno mediante Life Cycle Assessment: il caso COGEM.

Il presente lavoro ha come oggetto l’analisi di impatto ambientale, svolta mediante la metodologia Life Cycle Assessment (LCA) di un gruppo elettrogeno prodotto da COGEM s.r.l., azienda italiana situata a Castel d’Argile, nel bolognese, con l’obiettivo di supportare eventuali scelte di riprogettazione del prodotto anche in termini di Design for Disassembly. Dopo una prima analisi del contesto attuale in cui si colloca, la metodologia LCA è stata studiata nel dettaglio per poterla poi applicare al prodotto in oggetto. Esso è stato individuato mediante un’analisi delle vendite di COGEM, in seguito si è svolta una fase di raccolta dati e si sviluppata l’analisi LCA usando il software SimaPro 7.1. I risultati ottenuti hanno consentito di individuare le possibili aree di miglioramento dell’impatto ambientale dell’intero ciclo di vita del gruppo elettrogeno. In particolare si sono valutate due soluzioni innovative: un gruppo elettrogeno alimentato a olio vegetale e uno progettato in ottica DFD per consentire un corretto smaltimento dei rifiuti.