Practical design considerations of cascaded hybrid battery storage systems

The high cost of batteries has led to investigations in using second-life ex-transportation batteries for grid support applications. Vehicle manufacturers currently all have different specifications for battery chemistry, arrangement of cells, capacity and voltage. With anticipated new developments in battery chemistry which could also affect these parameters, there are, as yet, no standards defining parameters in second life applications. To overcome issues relating to sizing and to prevent future obsolescence for the rest of the energy storage system, a cascaded topology with an operating envelope design approach has been used to connect together modules. This topology offers advantages in terms of system reliability. The design methodology is validated through a set of experimental results resulting in the creation of surface maps looking at the operation of the converter (efficiency and inductor ripple current). The use of a pre-defined module operating envelope also offers advantages for developing new operational strategies for systems with both hybrid battery energy systems and also hybrid systems including other energy sources such as solar power.

Accommodation in young adults wearing multifocal soft contact lenses under long- and short- wavelength lighting

Purpose: Several studies have suggested accommodative lags may serve as a stimulus for myopic growth, and while a blurred foveal image is believed to the main stimulus for accommodation, spectral composition of the retinal image is also believed to influence accommodative accuracy. Of particular interest is how altering spectral lighting conditions influences accommodation in the presence of soft multifocal contact lenses, which are currently being used off-label for myopia control. Methods: Accommodative responses were assessed using a Grand Seiko WAM-5500 autorefractor for four target distances: 25, 33, 50, and 100cm for 30 young adult subjects (14 myopic, 16 emmetropic; mean refractive errors (±SD, D) -4.22±2.04 and -0.15±0.67 respectively). Measurements were obtained with four different soft contact lenses, Single vision distance (SVD), Single vision near (SVN), Centre-Near (CN) and Centre-Distance (CD) (+1.50 add), and three different lighting conditions: red (peak λ 632nm), blue (peak λ 460nm), and white (peak λ 560nm). Corrections for chromatic differences in refraction were made prior to calculating accommodative errors. Results: The size of accommodative errors was significantly affected by lens design (p<0.001), lighting (p=0.027), and target distance (p=0.009). Mean accommodative errors were significantly larger with the SV lenses compared to the CD and CN designs (p<0.001). Errors were also significantly larger under blue light compared to white (p=0.004) and a significant interaction noted between lens design and lighting (p<0.001). Blue light generally decreased accommodative lags and increased accommodative leads relative to white and red light, the opposite was true of red light (p≤0.001). Lens design also significantly influenced direction of accommodative error (i.e. lag or lead) (p<0.001). Interactions with or between refractive groups were not found to be statistically significant for either the magnitude or direction of accommodative error (p>0.05 for all). Conclusions: Accuracy of accommodation is affected by both lens design and by wavelength of lighting. These accommodative lag data lend some support to recent speculation about the potential therapeutic value of lighting with a spectral bias towards blue during near work for myopia, although such treatment effects are likely to be more subtle under broad compared to the narrow spectrum lighting conditions used here.

Design and evaluation of a consulting system for database design

Database design is a difficult problem for non-expert designers. It is desirable to assist such designers during the problem solving process by means of a knowledge based (KB) system. A number of prototype KB systems have been proposed, however there are many shortcomings. Few have incorporated sufficient expertise in modeling relationships, particularly higher order relationships. There has been no empirical study that experimentally tested the effectiveness of any of these KB tools. Problem solving behavior of non-experts, whom the systems were intended to assist, has not been one of the bases for system design. In this project a consulting system for conceptual database design that addresses the above short comings was developed and empirically validated.^ The system incorporates (a) findings on why non-experts commit errors and (b) heuristics for modeling relationships. Two approaches to knowledge base implementation--system restrictiveness and decisional guidance--were used and compared in this project. The Restrictive approach is proscriptive and limits the designer's choices at various design phases by forcing him/her to follow a specific design path. The Guidance system approach which is less restrictive, provides context specific, informative and suggestive guidance throughout the design process. The main objectives of the study are to evaluate (1) whether the knowledge-based system is more effective than a system without the knowledge-base and (2) which knowledge implementation--restrictive or guidance--strategy is more effective. To evaluate the effectiveness of the knowledge base itself, the two systems were compared with a system that does not incorporate the expertise (Control).^ The experimental procedure involved the student subjects solving a task without using the system (pre-treatment task) and another task using one of the three systems (experimental task). The experimental task scores of those subjects who performed satisfactorily in the pre-treatment task were analyzed. Results are (1) The knowledge based approach to database design support lead to more accurate solutions than the control system; (2) No significant difference between the two KB approaches; (3) Guidance approach led to best performance; and (4) The subjects perceived the Restrictive system easier to use than the Guidance system. ^

A high efficient biometrics approach for unconstrained iris segmentation and recognition

This dissertation develops an innovative approach towards less-constrained iris biometrics. Two major contributions are made in this research endeavor: (1) Designed an award-winning segmentation algorithm in the less-constrained environment where image acquisition is made of subjects on the move and taken under visible lighting conditions, and (2) Developed a pioneering iris biometrics method coupling segmentation and recognition of the iris based on video of moving persons under different acquisitions scenarios. The first part of the dissertation introduces a robust and fast segmentation approach using still images contained in the UBIRIS (version 2) noisy iris database. The results show accuracy estimated at 98% when using 500 randomly selected images from the UBIRIS.v2 partial database, and estimated at 97% in a Noisy Iris Challenge Evaluation (NICE.I) in an international competition that involved 97 participants worldwide involving 35 countries, ranking this research group in sixth position. This accuracy is achieved with a processing speed nearing real time. The second part of this dissertation presents an innovative segmentation and recognition approach using video-based iris images. Following the segmentation stage which delineates the iris region through a novel segmentation strategy, some pioneering experiments on the recognition stage of the less-constrained video iris biometrics have been accomplished. In the video-based and less-constrained iris recognition, the test or subject iris videos/images and the enrolled iris images are acquired with different acquisition systems. In the matching step, the verification/identification result was accomplished by comparing the similarity distance of encoded signature from test images with each of the signature dataset from the enrolled iris images. With the improvements gained, the results proved to be highly accurate under the unconstrained environment which is more challenging. This has led to a false acceptance rate (FAR) of 0% and a false rejection rate (FRR) of 17.64% for 85 tested users with 305 test images from the video, which shows great promise and high practical implications for iris biometrics research and system design.

Design, Synthesis, and Biological Characterization of Largazole Analogues

Histone deacetylases (HDACs) have been shown to play key roles in tumorigenesis, and

have been validated as effective enzyme target for cancer treatment. Largazole, a marine natural

product isolated from the cyanobacterium Symploca, is an extremely potent HDAC inhibitor that

has been shown to possess high differential cytotoxicity towards cancer cells along with excellent

HDAC class-selectivity. However, improvements can be made in the isoform-selectivity and

pharmacokinetic properties of largazole.

In attempts to make these improvements and furnish a more efficient biochemical probe

as well as a potential therapeutic, several largazole analogues have been designed, synthesized,

and tested for their biological activity. Three different types of analogues were prepared. First,

different chemical functionalities were introduced at the C2 position to probe the class Iselectivity profile of largazole. Additionally, docking studies led to the design of a potential

HDAC8-selective analogue. Secondly, the thiol moiety in largazole was replaced with a wide

variety of othe zinc-binding group in order to probe the effect of Zn2+ affinity on HDAC

inhibition. Lastly, three disulfide analogues of largazole were prepared in order to utilize a

different prodrug strategy to modulate the pharmacokinetic properties of largazole.

Through these analogues it was shown that C2 position can be modified significantly

without a major loss in activity while also eliciting minimal changes in isoform-selectivity. While

the Zn2+-binding group plays a major role in HDAC inhibition, it was also shown that the thiol

can be replaced by other functionalities while still retaining inhibitory activity. Lastly, the use of

a disulfide prodrug strategy was shown to affect pharmacokinetic properties resulting in varying

functional responses in vitro and in vivo.

v

Largazole is already an impressive HDAC inhibitor that shows incredible promise.

However, in order to further develop this natural product into an anti-cancer therapeutic as well as

a chemical probe, improvements in the areas of pharmacokinetics as well as isoform-selectivity

are required. Through these studies we plan on building upon existing structure–activity

relationships to further our understanding of largazole’s mechanism of inhibition so that we may

improve these properties and ultimately develop largazole into an efficient HDAC inhibitor that

may be used as an anti-cancer therapeutic as well as a chemical probe for the studying of

biochemical systems.

MOVPE growth and characterization of Al(Ga)N and InAlN/AlGaN quantum wells for UV LED applications

The study of III-nitride materials (InN, GaN and AlN) gained huge research momentum after breakthroughs in the production light emitting diodes (LEDs) and laser diodes (LDs) over the past two decades. Last year, the Nobel Prize in Physics was awarded jointly to Isamu Akasaki, Hiroshi Amano and Shuji Nakamura for inventing a new energy efficient and environmental friendly light source: blue light-emitting diode (LED) from III-nitride semiconductors in the early 1990s. Nowadays, III-nitride materials not only play an increasingly important role in the lighting technology, but also become prospective candidates in other areas, for example, the high frequency (RF) high electron mobility transistor (HEMT) and photovoltaics. These devices require the growth of high quality III-nitride films, which can be prepared using metal organic vapour phase epitaxy (MOVPE). The main aim of my thesis is to study and develop the growth of III-nitride films, including AlN, u-AlGaN, Si-doped AlGaN, and InAlN, serving as sample wafers for fabrication of ultraviolet (UV) LEDs, in order to replace the conventional bulky, expensive and environmentally harmful mercury lamp as new UV light sources. For application to UV LEDs, reducing the threading dislocation density (TDD) in AlN epilayers on sapphire substrates is a key parameter for achieving high-efficiency AlGaNbased UV emitters. In Chapter 4, after careful and systematic optimisation， a working set of conditions, the screw and edge type dislocation density in the AlN were reduced to around 2.2×108 cm-2 and 1.3×109 cm-2 , respectively, using an optimized three-step process, as estimated by TEM. An atomically smooth surface with an RMS roughness of around 0.3 nm achieved over 5×5 µm 2 AFM scale. Furthermore, the motion of the steps in a one dimension model has been proposed to describe surface morphology evolution, especially the step bunching feature found under non-optimal conditions. In Chapter 5, control of alloy composition and the maintenance of compositional uniformity across a growing epilayer surface were demonstrated for the development of u-AlGaN epilayers. Optimized conditions (i.e. a high growth temperature of 1245 °C) produced uniform and smooth film with a low RMS roughness of around 2 nm achieved in 20×20 µm 2 AFM scan. The dopant that is most commonly used to obtain n-type conductivity in AlxGa1-xN is Si. However, the incorporation of Si has been found to increase the strain relaxation and promote unintentional incorporation of other impurities (O and C) during Si-doped AlGaN growth. In Chapter 6, reducing edge-type TDs is observed to be an effective appoach to improve the electric and optical properties of Si-doped AlGaN epilayers. In addition, the maximum electron concentration of 1.3×1019 cm-3 and 6.4×1018 cm-3 were achieved in Si-doped Al0.48Ga0.52N and Al0.6Ga0.4N epilayers as measured using Hall effect. Finally, in Chapter 7, studies on the growth of InAlN/AlGaN multiple quantum well (MQW) structures were performed, and exposing InAlN QW to a higher temperature during the ramp to the growth temperature of AlGaN barrier (around 1100 °C) will suffer a significant indium (In) desorption. To overcome this issue, quasi-two-tempeature (Q2T) technique was applied to protect InAlN QW. After optimization, an intense UV emission from MQWs has been observed in the UV spectral range from 320 to 350 nm measured by room temperature photoluminescence.

The effectiveness of a nurse practitioner-led pain management team in long-term care: A mixed methods study

BACKGROUND: Considering the high rates of pain as well as its under-management in long-term care (LTC) settings, research is needed to explore innovations in pain management that take into account limited resource realities. It has been suggested that nurse practitioners, working within an inter-professional model, could potentially address the under-management of pain in LTC.

OBJECTIVES: This study evaluated the effectiveness of implementing a nurse practitioner-led, inter-professional pain management team in LTC in improving (a) pain-related resident outcomes; (b) clinical practice behaviours (e.g., documentation of pain assessments, use of non-pharmacological and pharmacological interventions); and, (c) quality of pain medication prescribing practices.

METHODS: A mixed method design was used to evaluate a nurse practitioner-led pain management team, including both a quantitative and qualitative component. Using a controlled before-after study, six LTC homes were allocated to one of three groups: 1) a nurse practitioner-led pain team (full intervention); 2) nurse practitioner but no pain management team (partial intervention); or, 3) no nurse practitioner, no pain management team (control group). In total, 345 LTC residents were recruited to participate in the study; 139 residents for the full intervention group, 108 for the partial intervention group, and 98 residents for the control group. Data was collected in Canada from 2010 to 2012.

RESULTS: Implementing a nurse practitioner-led pain team in LTC significantly reduced residents' pain and improved functional status compared to usual care without access to a nurse practitioner. Positive changes in clinical practice behaviours (e.g., assessing pain, developing care plans related to pain management, documenting effectiveness of pain interventions) occurred over the intervention period for both the nurse practitioner-led pain team and nurse practitioner-only groups; these changes did not occur to the same extent, if at all, in the control group. Qualitative analysis highlighted the perceived benefits of LTC staff about having access to a nurse practitioner and benefits of the pain team, along with barriers to managing pain in LTC.

CONCLUSIONS: The findings from this study showed that implementing a nurse practitioner-led pain team can significantly improve resident pain and functional status as well as clinical practice behaviours of LTC staff. LTC homes should employ a nurse practitioner, ideally located onsite as opposed to an offsite consultative role, to enhance inter-professional collaboration and facilitate more consistent and timely access to pain management.

Reassembled, Slightly Askew:Composition & Sound Design

Reassembled, Slightly Askew is an autobiographical, immersive audio-based artwork based on Shannon Sickels’ experience of falling critically ill with a rare brain infection and her journey of rehabilitation with an acquired brain injury. Audience members experience Reassembled individually, listening to the audio via headphones while lying on a bed. The piece makes use of binaural microphone technology and spatial sound design techniques, causing listeners to feel they are inside Shannon’s head, viscerally experiencing her descent into coma, brain surgeries, early days in the hospital, and re-integration into the world with a hidden disability. It is a new kind of storytelling, never done before about this topic, that places the listener safely in the first-person perspective with the aim of increasing empathy and understanding. Reassembled… was made through a 5-year collaboration with an interdisciplinary team of artists led by Shannon Sickels (writer & performer), Paul Stapleton (composer & sound designer), Anna Newell (director), Hanna Slattne (dramaturgy), Stevie Prickett (choreography), and Shannon’s consultant neurosurgeon and head injury nurse. It’s development and production has been made possible with the support of a Wellcome Trust Arts Award, the Arts Council NI, Sonic Arts Research Centre, Belfast's Metropolitan Arts Centre, and grants from the Arts & Disability Award Ireland scheme. In its 2015 premiere year, Reassembled had 99 shows across Northern Ireland, including at the Cathedral Quarter Arts Festival (the MAC, Belfast) and BOUNCE Arts & Disability Forum Festival (Lyric Theatre, Belfast). It was awarded 5 stars in the Stage, a Hospital Club h100 Theatre & Performance Award, and been shared at medical conferences and trainings across the UK. It continues to be presented in diverse artistic and educational contexts, including as part of A Nation’s Theatre Festival in 2016 at Battersea Arts Centre in London where it was given 4 star reviews in the Guardian, Time Out London and the Evening Standard. "A real-life ordeal, captured by a daring, disorientating artistic collaboration, which works brilliantly on so many levels…It should be available on prescription.” — The Stage ★★★★★ www.reassembled.co.uk Audio clips and documentary footage available here: http://www.paulstapleton.net/portfolio/reassembled-slightly-askew

Common Ground: Building A Better Seattle Through an Improved Democratization of The City’s Design Review Process

Thesis (Master's)--University of Washington, 2016-06

Design and Fabrication of Perovskite Micro-Cavity Lasers

Thesis (Master's)--University of Washington, 2016-08

Information Presentation Features and Comprehensibility of Hospital Report Cards: Design Analysis and Online Survey Among Users

Background: Improving the transparency of information about the quality of health care providers is one way to improve health care quality. It is assumed that Internet information steers patients toward better-performing health care providers and will motivate providers to improve quality. However, the effect of public reporting on hospital quality is still small. One of the reasons is that users find it difficult to understand the formats in which information is presented. Objective: We analyzed the presentation of risk-adjusted mortality rate (RAMR) for coronary angiography in the 10 most commonly used German public report cards to analyze the impact of information presentation features on their comprehensibility. We wanted to determine which information presentation features were utilized, were preferred by users, led to better comprehension, and had similar effects to those reported in evidence-based recommendations described in the literature. Methods: The study consisted of 5 steps: (1) identification of best-practice evidence about the presentation of information on hospital report cards; (2) selection of a single risk-adjusted quality indicator; (3) selection of a sample of designs adopted by German public report cards; (4) identification of the information presentation elements used in public reporting initiatives in Germany; and (5) an online panel completed an online questionnaire that was conducted to determine if respondents were able to identify the hospital with the lowest RAMR and if respondents’ hospital choices were associated with particular information design elements. Results: Evidence-based recommendations were made relating to the following information presentation features relevant to report cards: evaluative table with symbols, tables without symbols, bar charts, bar charts without symbols, bar charts with symbols, symbols, evaluative word labels, highlighting, order of providers, high values to indicate good performance, explicit statements of whether high or low values indicate good performance, and incomplete data (“N/A” as a value). When investigating the RAMR in a sample of 10 hospitals’ report cards, 7 of these information presentation features were identified. Of these, 5 information presentation features improved comprehensibility in a manner reported previously in literature. Conclusions: To our knowledge, this is the first study to systematically analyze the most commonly used public reporting card designs used in Germany. Best-practice evidence identified in international literature was in agreement with 5 findings about German report card designs: (1) avoid tables without symbols, (2) include bar charts with symbols, (3) state explicitly whether high or low values indicate good performance or provide a “good quality” range, (4) avoid incomplete data (N/A given as a value), and (5) rank hospitals by performance. However, these findings are preliminary and should be subject of further evaluation. The implementation of 4 of these recommendations should not present insurmountable obstacles. However, ranking hospitals by performance may present substantial difficulties.

Role for cell-to-cell communication in stem cell specification toward pancreatic progenitors: relevance to the design of novel therapies for diabetes.

Thesis (Ph.D.)--University of Washington, 2016-08

Energy efficient measures to reduce electrical energy use in commercial buildings in New York City

GEA Consulting Engineers, acting as the design engineers, was hired by the owner, East Village 207 Residential LLC2 for energy modeling for compliance with LEED NC V3 -- This report details the results of the energy simulation done with the 100% construction documents -- This report only refers to entities within the LEED3 project boundary -- The project consists of a new eight-story high-end residential condominium building with 81 units, as shown in illustration 1, and approximately 117,905 GSF, equivalent to 10,953.73 m2, is located at 211 E 13th Street in New York, NY -- The residential portion of the building will function 24-7 -- The design goal is to utilize energy efficient measures to reduce electrical energy use and aims to achieve LEED certification -- LEED EA Credit 14 requires a building to demonstrate a percentage improvement in the proposed building performance compared with the baseline building -- The Credit rewards 1 point for achieving 12% reduction in energy costs -- Additionally, the Credit rewards another point for each subsequent reduction of 2% in the building’s energy cost

Beyond the bottom line: redefining the value of design in SME formation

For SMEs to operate in the complex and globalised economic landscape of today engaging with innovation can sustain competitive advantage. Within Design Management, design is being increasingly posited as a strategic resource to facilitate the absorption of new design resources and leverage design knowledge in ways that support SMEs through such economic pressures. Evidencing the relationship between design and economic performance is complex, leading to extensive current research and industry efforts to show how design adds economic value. Despite the value of such efforts, it is important to recognise that innovation means different things to different organizations, especially for start-ups and SMEs. Within the rising tide of design-led innovation, there is a gap being explored in how design can effectively capture and evaluate its contribution within the complex and diverse situations of business development it engages. In seeking to address this gap, this paper presents findings from research undertaken within Design in Action (DiA), an AHRC-funded knowledge exchange hub. Presenting DiA as a single case study, the paper offers methodical reflection on five case example start-up businesses funded by DiA in order to explore the value that design-led innovation approaches offered in their formation.

Street lighting mesh network protocol

The digital revolution of the 21st century contributed to stem the Internet of Things (IoT). Trillions of embedded devices using the Internet Protocol (IP), also called smart objects, will be an integral part of the Internet. In order to support such an extremely large address space, a new Internet Protocol, called Internet Protocol Version 6 (IPv6) is being adopted. The IPv6 over Low Power Wireless Personal Area Networks (6LoWPAN) has accelerated the integration of WSNs into the Internet. At the same time, the Constrained Application Protocol (CoAP) has made it possible to provide resource constrained devices with RESTful Web services functionalities. This work builds upon previous experience in street lighting networks, for which a proprietary protocol, devised by the Lighting Living Lab, was implemented and used for several years. The proprietary protocol runs on a broad range of lighting control boards. In order to support heterogeneous applications with more demanding communication requirements and to improve the application development process, it was decided to port the Contiki OS to the four channel LED driver (4LD) board from Globaltronic. This thesis describes the work done to adapt the Contiki OS to support the Microchip TM PIC24FJ128GA308 microprocessor and presents an IP based solution to integrate sensors and actuators in smart lighting applications. Besides detailing the system’s architecture and implementation, this thesis presents multiple results showing that the performance of CoAP based resource retrievals in constrained nodes is adequate for supporting networking services in street lighting networks.