Tool support for testing concurrent Java components

Concurrent programs are hard to test due to the inherent nondeterminism. This paper presents a method and tool support for testing concurrent Java components. Too[ support is offered through ConAn (Concurrency Analyser), a too] for generating drivers for unit testing Java classes that are used in a multithreaded context. To obtain adequate controllability over the interactions between Java threads, the generated driver contains threads that are synchronized by a clock. The driver automatically executes the calls in the test sequence in the prescribed order and compares the outputs against the expected outputs specified in the test sequence. The method and tool are illustrated in detail on an asymmetric producer-consumer monitor. Their application to testing over 20 concurrent components, a number of which are sourced from industry and were found to contain faults, is presented and discussed.

GUI Behavior from Source Code Analysis

When developing interactive applications, considering the correctness of graphical user interfaces (GUIs) code is essential. GUIs are critical components of today's software, and contemporary software tools do not provide enough support for ensuring GUIs' code quality. GUIsurfer, a GUI reverse engineering tool, enables evaluation of behavioral properties of user interfaces. It performs static analysis of GUI code, generating state machines that can help in the evaluation of interactive applications. This paper describes the design, software architecture, and the use of GUIsurfer through an example. The tool is easily re-targetable, and support is available to Java/Swing, and WxHaskell. The paper sets the ground for a generalization effort to consider rich internet applications. It explores the GWT web applications' user interface programming toolkit.

Models for the Reverse Engineering of Java/Swing Applications

Abstract. Interest in design and development of graphical user interface (GUIs) is growing in the last few years. However, correctness of GUI's code is essential to the correct execution of the overall software. Models can help in the evaluation of interactive applications by allowing designers to concentrate on its more important aspects. This paper describes our approach to reverse engineering abstract GUI models directly from the Java/Swing code.

XAdES4J: a java library for XAdES signature services

As comunicações electrónicas são cada vez mais o meio de eleição para negócios entre entidades e para as relações entre os cidadãos e o Estado (e-government). Esta diversidade de transacções envolve, muitas vezes, informação sensível e com possível valor legal. Neste contexto, as assinaturas electrónicas são uma importante base de confiança, fornecendo garantias de integridade e autenticação entre os intervenientes. A produção de uma assinatura digital resulta não só no valor da assinatura propriamente dita, mas também num conjunto de informação adicional acerca da mesma, como o algoritmo de assinatura, o certificado de validação ou a hora e local de produção. Num cenário heterogéneo como o descrito anteriormente, torna-se necessária uma forma flexível e interoperável de descrever esse tipo de informação. A linguagem XML é uma forma adequada de representar uma assinatura neste contexto, não só pela sua natureza estruturada, mas principalmente por ser baseada em texto e ter suporte generalizado. A recomendação XML Signature Syntax and Processing (ou apenas XML Signature) foi o primeiro passo na representação de assinaturas em XML. Nela são definidas sintaxe e regras de processamento para criar, representar e validar assinaturas digitais. As assinaturas XML podem ser aplicadas a qualquer tipo de conteúdos digitais identificáveis por um URI, tanto no mesmo documento XML que a assinatura, como noutra qualquer localização. Além disso, a mesma assinatura XML pode englobar vários recursos, mesmo de tipos diferentes (texto livre, imagens, XML, etc.). À medida que as assinaturas electrónicas foram ganhando relevância tornou-se evidente que a especificação XML Signature não era suficiente, nomeadamente por não dar garantias de validade a longo prazo nem de não repudiação. Esta situação foi agravada pelo facto da especificação não cumprir os requisitos da directiva 1999/93/EC da União Europeia, onde é estabelecido um quadro legal para as assinaturas electrónicas a nível comunitário. No seguimento desta directiva da União Europeia foi desenvolvida a especificação XML Advanced Electronic Signatures que define formatos XML e regras de processamento para assinaturas electrónicas não repudiáveis e com validade verificável durante períodos de tempo extensos, em conformidade com a directiva. Esta especificação estende a recomendação XML Signature, definindo novos elementos que contêm informação adicional acerca da assinatura e dos recursos assinados (propriedades qualificadoras). A plataforma Java inclui, desde a versão 1.6, uma API de alto nível para serviços de assinaturas digitais em XML, de acordo com a recomendação XML Signature. Contudo, não existe suporte para assinaturas avançadas. Com este projecto pretende-se desenvolver uma biblioteca Java para a criação e validação de assinaturas XAdES, preenchendo assim a lacuna existente na plataforma. A biblioteca desenvolvida disponibiliza uma interface com alto nível de abstracção, não tendo o programador que lidar directamente com a estrutura XML da assinatura nem com os detalhes do conteúdo das propriedades qualificadoras. São definidos tipos que representam os principais conceitos da assinatura, nomeadamente as propriedades qualificadoras e os recursos assinados, sendo os aspectos estruturais resolvidos internamente. Neste trabalho, a informação que compõe uma assinatura XAdES é dividia em dois grupos: o primeiro é formado por características do signatário e da assinatura, tais como a chave e as propriedades qualificadoras da assinatura. O segundo grupo é composto pelos recursos assinados e as correspondentes propriedades qualificadoras. Quando um signatário produz várias assinaturas em determinado contexto, o primeiro grupo de características será semelhante entre elas. Definiu-se o conjunto invariante de características da assinatura e do signatário como perfil de assinatura. O conceito é estendido à verificação de assinaturas englobando, neste caso, a informação a usar nesse processo, como por exemplo os certificados raiz em que o verificador confia. Numa outra perspectiva, um perfil constitui uma configuração do serviço de assinatura correspondente. O desenho e implementação da biblioteca estão também baseados no conceito de fornecedor de serviços. Um fornecedor de serviços é uma entidade que disponibiliza determinada informação ou serviço necessários à produção e verificação de assinaturas, nomeadamente: selecção de chave/certificado de assinatura, validação de certificados, interacção com servidores de time-stamp e geração de XML. Em vez de depender directamente da informação em causa, um perfil — e, consequentemente, a operação correspondente — é configurado com fornecedores de serviços que são invocados quando necessário. Para cada tipo de fornecedor de serviços é definida um interface, podendo as correspondentes implementações ser configuradas de forma independente. A biblioteca inclui implementações de todos os fornecedores de serviços, sendo algumas delas usadas for omissão na produção e verificação de assinaturas. Uma vez que o foco do projecto é a especificação XAdES, o processamento e estrutura relativos ao formato básico são delegados internamente na biblioteca Apache XML Security, que disponibiliza uma implementação da recomendação XML Signature. Para validar o funcionamento da biblioteca, nomeadamente em termos de interoperabilidade, procede-se, entre outros, à verificação de um conjunto de assinaturas produzidas por Estados Membros da União Europeia, bem como por outra implementação da especificação XAdES.

Scheduling of head-dependent cascaded hydro systems: Mixed-integer quadratic programming approach

This paper is on the problem of short-term hydro, scheduling, particularly concerning head-dependent cascaded hydro systems. We propose a novel mixed-integer quadratic programming approach, considering not only head-dependency, but also discontinuous operating regions and discharge ramping constraints. Thus, an enhanced short-term hydro scheduling is provided due to the more realistic modeling presented in this paper. Numerical results from two case studies, based on Portuguese cascaded hydro systems, illustrate the proficiency of the proposed approach.

Addressing the facilities layout design problem through constraint logic programming

One of the most difficult problems that face researchers experimenting with complex systems in real world applications is the Facility Layout Design Problem. It relies with the design and location of production lines, machinery and equipment, inventory storage and shipping facilities. In this work it is intended to address this problem through the use of Constraint Logic Programming (CLP) technology. The use of Genetic Algorithms (GA) as optimisation technique in CLP environment is also an issue addressed. The approach aims the implementation of genetic algorithm operators following the CLP paradigm.

Hybrid fuzzy Monte Carlo and logic programming model for distribution network reconfiguration in the presence of outages

This paper presents a methodology for distribution networks reconfiguration in outage presence in order to choose the reconfiguration that presents the lower power losses. The methodology is based on statistical failure and repair data of the distribution power system components and uses fuzzy-probabilistic modelling for system component outage parameters. Fuzzy membership functions of system component outage parameters are obtained by statistical records. A hybrid method of fuzzy set and Monte Carlo simulation based on the fuzzy-probabilistic models allows catching both randomness and fuzziness of component outage parameters. Once obtained the system states by Monte Carlo simulation, a logical programming algorithm is applied to get all possible reconfigurations for every system state. In order to evaluate the line flows and bus voltages and to identify if there is any overloading, and/or voltage violation a distribution power flow has been applied to select the feasible reconfiguration with lower power losses. To illustrate the application of the proposed methodology to a practical case, the paper includes a case study that considers a real distribution network.

Logic programming and fuzzy Monte Carlo for distribution network reconfiguration

This paper present a methodology to choose the distribution networks reconfiguration that presents the lower power losses. The proposed methodology is based on statistical failure and repair data of the distribution power system components and uses fuzzy-probabilistic modeling for system component outage parameters. The proposed hybrid method using fuzzy sets and Monte Carlo simulation based on the fuzzyprobabilistic models allows catching both randomness and fuzziness of component outage parameters. A logic programming algorithm is applied, once obtained the system states by Monte Carlo Simulation, to get all possible reconfigurations for each system state. To evaluate the line flows and bus voltages and to identify if there is any overloading, and/or voltage violation an AC load flow has been applied to select the feasible reconfiguration with lower power losses. To illustrate the application of the proposed methodology, the paper includes a case study that considers a 115 buses distribution network.

Optimal scheduling of a renewable micro-grid in an isolated load area using mixed-integer linear programming

In the energy management of the isolated operation of small power system, the economic scheduling of the generation units is a crucial problem. Applying right timing can maximize the performance of the supply. The optimal operation of a wind turbine, a solar unit, a fuel cell and a storage battery is searched by a mixed-integer linear programming implemented in General Algebraic Modeling Systems (GAMS). A Virtual Power Producer (VPP) can optimal operate the generation units, assured the good functioning of equipment, including the maintenance, operation cost and the generation measurement and control. A central control at system allows a VPP to manage the optimal generation and their load control. The application of methodology to a real case study in Budapest Tech, demonstrates the effectiveness of this method to solve the optimal isolated dispatch of the DC micro-grid renewable energy park. The problem has been converged in 0.09 s and 30 iterations.

Ancillary services dispatch using linear programming and genetic algorithm approaches

Electricity market players operating in a liberalized environment requires access to an adequate decision support tool, allowing them to consider all the business opportunities and take strategic decisions. Ancillary services represent a good negotiation opportunity that must be considered by market players. For this, decision support tools must include ancillary market simulation. This paper proposes two different methods (Linear Programming and Genetic Algorithm approaches) for ancillary services dispatch. The methodologies are implemented in MASCEM, a multi-agent based electricity market simulator. A test case concerning the dispatch of Regulation Down, Regulation Up, Spinning Reserve and Non-Spinning Reserve services is included in this paper.

New insights on integer-programming models for the kidney exchange problem

In recent years several countries have set up policies that allow exchange of kidneys between two or more incompatible patient–donor pairs. These policies lead to what is commonly known as kidney exchange programs. The underlying optimization problems can be formulated as integer programming models. Previously proposed models for kidney exchange programs have exponential numbers of constraints or variables, which makes them fairly difficult to solve when the problem size is large. In this work we propose two compact formulations for the problem, explain how these formulations can be adapted to address some problem variants, and provide results on the dominance of some models over others. Finally we present a systematic comparison between our models and two previously proposed ones via thorough computational analysis. Results show that compact formulations have advantages over non-compact ones when the problem size is large.

BabeLO : an extensible converter of programming exercises formats

In the last two decades, there was a proliferation of programming exercise formats that hinders interoperability in automatic assessment. In the lack of a widely accepted standard, a pragmatic solution is to convert content among the existing formats. BabeLO is a programming exercise converter providing services to a network of heterogeneous e-learning systems such as contest management systems, programming exercise authoring tools, evaluation engines and repositories of learning objects. Its main feature is the use of a pivotal format to achieve greater extensibility. This approach simplifies the extension to other formats, just requiring the conversion to and from the pivotal format. This paper starts with an analysis of programming exercise formats representative of the existing diversity. This analysis sets the context for the proposed approach to exercise conversion and to the description of the pivotal data format. The abstract service definition is the basis for the design of BabeLO, its components and web service interface. This paper includes a report on the use of BabeLO in two concrete scenarios: to relocate exercises to a different repository, and to use an evaluation engine in a network of heterogeneous systems.

A distributed system for learning programming on-line

Several Web-based on-line judges or on-line programming trainers have been developed in order to allow students to train their programming skills. However, their pedagogical functionalities in the learning of programming have not been clearly defined. EduJudge is a project which aims to integrate the “UVA On-line Judge”, an existing on-line programming trainer with an important number of problems and users, into an effective educational environment consisting of the e-learning platform Moodle and the competitive learning tool QUESTOURnament. The result is the EduJudge system which allows teachers to apply different pedagogical approaches using a proven e-learning platform, makes problems easy to search through an effective search engine, and provides an automated evaluation of the solutions submitted to these problems. The final objective is to provide new learning strategies to motivate students and present programming as an easy and attractive challenge. EduJudge has been tried and tested in three algorithms and programming courses in three different Engineering degrees. The students’ motivation and satisfaction levels were analysed alongside the effects of the EduJudge system on students’ academic outcomes. Results indicate that both students and teachers found that among other multiple benefits the EduJudge system facilitates the learning process. Furthermore, the experi- ment also showed an improvement in students’ academic outcomes. It must be noted that the students’ level of satisfaction did not depend on their computer skills or their gender.

CrimsonHex: a learning objects repository for programming exercises

A repository of learning objects is a system that stores electronic resources in a technology-mediated learning process. The need for this kind of repository is growing as more educators become eager to use digital educa- tional contents and more of it becomes available. The sharing and use of these resources relies on the use of content and communication standards as a means to describe and exchange educational resources, commonly known as learning objects. This paper presents the design and implementation of a service-oriented reposi- tory of learning objects called crimsonHex. This repository supports new definitions of learning objects for specialized domains and we illustrate this feature with the definition of programming exercises as learning objects and its validation by the repository. The repository is also fully compliant with existing commu- nication standards and we propose extensions by adding new functions, formalizing message interchange and providing a REST interface. To validate the interoperability features of the repository, we developed a repository plug-in for Moodle that is expected to be included in the next release of this popular learning management system.

Orchestration of e-learning services for automatic evaluation of programming exercises

Managing programming exercises require several heterogeneous systems such as evaluation engines, learning objects repositories and exercise resolution environments. The coordination of networks of such disparate systems is rather complex. These tools would be too specific to incorporate in an e-Learning platform. Even if they could be provided as pluggable components, the burden of maintaining them would be prohibitive to institutions with few courses in those domains. This work presents a standard based approach for the coordination of a network of e-Learning systems participating on the automatic evaluation of programming exercises. The proposed approach uses a pivot component to orchestrate the interaction among all the systems using communication standards. This approach was validated through its effective use on classroom and we present some preliminary results.