Evaluating effects of spectral training data distribution on continuous field mapping performance

Continuous field mapping has to address two conflicting remote sensing requirements when collecting training data. On one hand, continuous field mapping trains fractional land cover and thus favours mixed training pixels. On the other hand, the spectral signature has to be preferably distinct and thus favours pure training pixels. The aim of this study was to evaluate the sensitivity of training data distribution along fractional and spectral gradients on the resulting mapping performance. We derived four continuous fields (tree, shrubherb, bare, water) from aerial photographs as response variables and processed corresponding spectral signatures from multitemporal Landsat 5 TM data as explanatory variables. Subsequent controlled experiments along fractional cover gradients were then based on generalised linear models. Resulting fractional and spectral distribution differed between single continuous fields, but could be satisfactorily trained and mapped. Pixels with fractional or without respective cover were much more critical than pure full cover pixels. Error distribution of continuous field models was non-uniform with respect to horizontal and vertical spatial distribution of target fields. We conclude that a sampling for continuous field training data should be based on extent and densities in the fractional and spectral, rather than the real spatial space. Consequently, adequate training plots are most probably not systematically distributed in the real spatial space, but cover the gradient and covariate structure of the fractional and spectral space well. (C) 2009 International Society for Photogrammetry and Remote Sensing, Inc. (ISPRS). Published by Elsevier B.V. All rights reserved.

Two Levels of Motivation and Two Types of Well-Being: Relations Between General and Goal-Specific Motivations, and Eudaimonic and Hedonic Well-Being

In this thesis I assess the individual and joint predictive associations and effects between multiple motivation and well-being concepts. In particular, three pairs of motivation concepts (intrinsic/extrinsic, approach/avoidance, and eudaimonic/hedonic) are assessed simultaneously at two levels of analysis (disposition and goal) and examined in relation to two types of well-being (eudaimonic and hedonic) in two studies, one correlational and the other experimental. Study 1: Using a correlational design, participants (N = 325, M age = 19.10, 87% female) completed self-report measures assessing six motivation and two well-being concepts. Exploratory factor analyses were used to assess patterns of associations among the motivational constructs. Results indicated that constructs displaying conceptual and empirical similarities co-occur, particularly, intrinsic, approach and eudaimonic motivation. Regression models were used to assess predictive relations between the motivational constructs and well-being. Both types of well-being were predicted by approach and avoidance dispositions, and hedonic goals. Additionally, eudaimonic well-being was uniquely predicted by eudaimonic dispositions and goals, and intrinsic dispositions; and hedonic well-being was uniquely predicted by extrinsic dispositions and approach goals. The patterns of associations among motivational constructs, and similarities and differences in the ways they predict each type of well-being, are discussed. Study 2: Using an experimental design, participants (N = 447, M age = 19.30, 88% female) were randomly assigned to one of eight experimental conditions, each involving a manipulation aimed at priming combinations of the three pairs of motivational constructs at the goal level. Participants then completed measures of both types of well-being. ANOVAs were used to assess the main effects and interactions of experimental condition for each of the three pairs of motivational constructs on well-being. Main effects of experimental conditions were non-significant. However, results indicated that focus on each of the three pairs of motivational constructs predicted well-being and that the manipulation impacted well-being indirectly, through experimentally-shifted motivational focus. Few interactions emerged. Implications for future experimental research and the conceptual integration of motivation and well-being constructs are discussed. In conclusion, Studies 1 and 2 inform the motivation and well-being fields in novel ways and provide preliminary steps towards studying these fields from an integrated and comprehensive motivational framework.

Causes of the apparent scale independence of fractal indices associated with forest fragmentation in Bolivia

In a recent investigation, Landsat TM and ETM+ data were used to simulate different resolutions of remotely-sensed images (from 30 to 1100 m) and to analyze the effect of resolution on a range of landscape metrics associated with spatial patterns of forest fragmentation in Chapare, Bolivia since the mid-1980s. Whereas most metrics were found to be highly dependent on pixel size, several fractal metrics (DLFD, MPFD, and AWMPFD) were apparently independent of image resolution, in contradiction with a sizeable body of literature indicating that fractal dimensions of natural objects depend strongly on image characteristics. The present re-analysis of the Chapare images, using two alternative algorithms routinely used for the evaluation of fractal dimensions, shows that the values of the box-counting and information fractal dimensions are systematically larger, sometimes by as much as 85%, than the "fractal" indices DLFD, MPFD, and AWMFD for the same images. In addition, the geometrical fractal features of the forest and non-forest patches in the Chapare region strongly depend on the resolution of images used in the analysis. The largest dependency on resolution occurs for the box-counting fractal dimension in the case of the non-forest patches in 1993, where the difference between the 30 and I 100 m-resolution images corresponds to 24% of the full theoretical range (1.0 to 2.0) of the mass fractal dimension. The observation that the indices DLFD, MPFD, and AWMPFD, unlike the classical fractal dimensions, appear relatively unaffected by resolution in the case of the Chapare images seems due essentially to the fact that these indices are based on a heuristic, "non-geometric" approach to fractals. Because of their lack of a foundation in fractal geometry, nothing guarantees that these indices will be resolution-independent in general. (C) 2006 International Society for Photogrammetry and Remote Sensing, Inc. (ISPRS). Published by Elsevier B.V. All rights reserved.

The contribution of primary and secondary somatosensory cortices to the representation of body parts and body sides: an fMRI adaptation study

Although the somatosensory homunculus is a classically used description of the way somatosensory inputs are processed in the brain, the actual contributions of primary (SI) and secondary (SII) somatosensory cortices to the spatial coding of touch remain poorly understood. We studied adaptation of the fMRI BOLD response in the somatosensory cortex by delivering pairs of vibrotactile stimuli to the finger tips of the index and middle fingers. The first stimulus (adaptor) was delivered either to the index or to the middle finger of the right or left hand, whereas the second stimulus (test) was always administered to the left index finger. The overall BOLD response evoked by the stimulation was primarily contralateral in SI and was more bilateral in SII. However, our fMRI adaptation approach also revealed that both somatosensory cortices were sensitive to ipsilateral as well as to contralateral inputs. SI and SII adapted more after subsequent stimulation of homologous as compared with nonhomologous fingers, showing a distinction between different fingers. Most importantly, for both somatosensory cortices, this finger-specific adaptation occurred irrespective of whether the tactile stimulus was delivered to the same or to different hands. This result implies integration of contralateral and ipsilateral somatosensory inputs in SI as well as in SII. Our findings suggest that SI is more than a simple relay for sensory information and that both SI and SII contribute to the spatial coding of touch by discriminating between body parts (fingers) and by integrating the somatosensory input from the two sides of the body (hands).

Analysis of full-waveform LiDAR data for classification of an orange orchard scene

Full-waveform laser scanning data acquired with a Riegl LMS-Q560 instrument were used to classify an orange orchard into orange trees, grass and ground using waveform parameters alone. Gaussian decomposition was performed on this data capture from the National Airborne Field Experiment in November 2006 using a custom peak-detection procedure and a trust-region-reflective algorithm for fitting Gauss functions. Calibration was carried out using waveforms returned from a road surface, and the backscattering coefficient c was derived for every waveform peak. The processed data were then analysed according to the number of returns detected within each waveform and classified into three classes based on pulse width and c. For single-peak waveforms the scatterplot of c versus pulse width was used to distinguish between ground, grass and orange trees. In the case of multiple returns, the relationship between first (or first plus middle) and last return c values was used to separate ground from other targets. Refinement of this classification, and further sub-classification into grass and orange trees was performed using the c versus pulse width scatterplots of last returns. In all cases the separation was carried out using a decision tree with empirical relationships between the waveform parameters. Ground points were successfully separated from orange tree points. The most difficult class to separate and verify was grass, but those points in general corresponded well with the grass areas identified in the aerial photography. The overall accuracy reached 91%, using photography and relative elevation as ground truth. The overall accuracy for two classes, orange tree and combined class of grass and ground, yielded 95%. Finally, the backscattering coefficient c of single-peak waveforms was also used to derive reflectance values of the three classes. The reflectance of the orange tree class (0.31) and ground class (0.60) are consistent with published values at the wavelength of the Riegl scanner (1550 nm). The grass class reflectance (0.46) falls in between the other two classes as might be expected, as this class has a mixture of the contributions of both vegetation and ground reflectance properties.

Validation of Canopy Height Profile methodology for small-footprint full-waveform airborne LiDAR data in a discontinuous canopy environment

A Canopy Height Profile (CHP) procedure presented in Harding et al. (2001) for large footprint LiDAR data was tested in a closed canopy environment as a way of extracting vertical foliage profiles from LiDAR raw-waveform. In this study, an adaptation of this method to small-footprint data has been shown, tested and validated in an Australian sparse canopy forest at plot- and site-level. Further, the methodology itself has been enhanced by implementing a dataset-adjusted reflectance ratio calculation according to Armston et al. (2013) in the processing chain, and tested against a fixed ratio of 0.5 estimated for the laser wavelength of 1550nm. As a by-product of the methodology, effective leaf area index (LAIe) estimates were derived and compared to hemispherical photography-derived values. To assess the influence of LiDAR aggregation area size on the estimates in a sparse canopy environment, LiDAR CHPs and LAIes were generated by aggregating waveforms to plot- and site-level footprints (plot/site-aggregated) as well as in 5m grids (grid-processed). LiDAR profiles were then compared to leaf biomass field profiles generated based on field tree measurements. The correlation between field and LiDAR profiles was very high, with a mean R2 of 0.75 at plot-level and 0.86 at site-level for 55 plots and the corresponding 11 sites. Gridding had almost no impact on the correlation between LiDAR and field profiles (only marginally improvement), nor did the dataset-adjusted reflectance ratio. However, gridding and the dataset-adjusted reflectance ratio were found to improve the correlation between raw-waveform LiDAR and hemispherical photography LAIe estimates, yielding the highest correlations of 0.61 at plot-level and of 0.83 at site-level. This proved the validity of the approach and superiority of dataset-adjusted reflectance ratio of Armston et al. (2013) over a fixed ratio of 0.5 for LAIe estimation, as well as showed the adequacy of small-footprint LiDAR data for LAIe estimation in discontinuous canopy forests.

Geotecnologias aplicadas à estimativa de perdas de solo por erosão hídrica na sub-bacia do Ribeirão das Perobas, Município de Santa Cruz do Rio Pardo-SP

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Manual for the compilation of science and technology indicators in the Caribbean

Includes bibliography

Metodologia para identificação de áreas de risco e prioritárias para conservação da avifauna na bacia hidrográfica do rio Una, Ibiúna/SP

Pós-graduação em Ciências Ambientais - Sorocaba

High-resolution stratigraphy of Central and Southern Adriatic Quaternary deposits of sub-Milankovian climate change on Mediterranean circulation

This volume is a collection of the work done in a three years-lasting PhD, focused in the analysis of Central and Southern Adriatic marine sediments, deriving from the collection of a borehole and many cores, achieved thanks to the good seismic-stratigraphic knowledge of the study area. The work was made out within European projects EC-EURODELTA (coordinated by Fabio Trincardi, ISMAR-CNR), EC-EUROSTRATAFORM (coordinated by Phil P. E. Weaver, NOC, UK), and PROMESS1 (coordinated by Serge Bernè, IFREMER, France). The analysed sedimentary successions presented highly expanded stratigraphic intervals, particularly for the last 400 kyr, 60 kyr and 6 kyr BP. These three different time-intervals resulted in a tri-partition of the PhD thesis. The study consisted of the analysis of planktic and benthic foraminifers’ assemblages (more than 560 samples analysed), as well as in preparing the material for oxygen and carbon stable isotope analyses, and interpreting and discussing the obtained dataset. The chronologic framework of the last 400 kyr was achieved for borehole PRAD1-2 (within the work-package WP6 of PROMESS1 project), collected in 186.5 m water depth. The proposed chronology derives from a multi-disciplinary approach, consisting of the integration of numerous and independent proxies, some of which analysed by other specialists within the project. The final framework based on: micropaleontology (calcareous nannofossils and foraminifers’ bioevents), climatic cyclicity (foraminifers’ assemblages), geochemistry (oxygen stable isotope, made out on planktic and benthic records), paleomagnetism, radiometric ages (14C AMS), teprhochronology, identification of sapropel-equivalent levels (Se). It’s worth to note the good consistency between the oxygen stable isotope curve obtained for borehole PRAD1-2 and other deeper Mediterranean records. The studied proxies allowed the recognition of all the isotopic intervals from MIS10 to MIS1 in PRAD1-2 record, and the base of the borehole has been ascribed to the early MIS11. Glacial and interglacial intervals identified in the Central Adriatic record have been analysed in detail for the paleo-environmental reconstruction, as well. For instance, glacial stages MIS6, MIS8 and MIS10 present peculiar foraminifers’ assemblages, composed by benthic species typical of polar regions and no longer living in the Central Adriatic nowadays. Moreover, a deepening trend in the paleo-bathymetry during glacial intervals was observed, from MIS10 (inner-shelf environment) to MIS4 (mid-shelf environment).Ten sapropel-equivalent levels have been recognised in PRAD1-2 Central Adriatic record. They showed different planktic foraminifers’ assemblages, which allowed the first distinction of events occurred during warm-climate (Se5, Se7), cold-climate (Se4, Se6 and Se8) and temperate-intermediate-climate (Se1, Se3, Se9, Se’, Se10) conditions, consistently with literature. Cold-climate sapropel equivalents are characterised by the absence of an oligotrophic phase, whereas warm-temeprate-climate sapropel equivalents present both the oligotrophic and the eutrophic phases (except for Se1). Sea floor conditions vary, according to benthic foraminifers’ assemblages, from relatively well oxygenated (Se1, Se3), to dysoxic (Se9, Se’, Se10), to highly dysoxic (Se4, Se6, Se8) to events during which benthic foraminifers are absent (Se5, Se7). These two latter levels are also characterised by the lamination of the sediment, feature never observed in literature in such shallow records. The enhanced stratification of the water column during the events Se8, Se7, Se6, Se5, Se4, and the concurring strong dilution of shallow water, pointed out by the isotope record, lead to the hypothesis of a period of intense precipitation in the Central Adriatic region, possibly due to a northward shift of the African Monsoon. Finally, the expression of Central Adriatic PRAD1-2 Se5 equivalent was compared with the same event, as registered in other Eastern Mediterranean areas. The sequence of substantially the same planktic foraminifers’ bioevents has been consistently recognised, indicating a similar evolution of the water column all over the Eastern Mediterranean; yet, the synchronism of these events cannot be demonstrated. A high resolution analysis of late Holocene (last 6000 years BP) climate change was carried out for the Adriatic area, through the recognition of planktic and benthic foraminifers’ bioevents. In particular, peaks of planktic Globigerinoides sacculifer (four during the last 5500 years BP in the most expanded core) have been interpreted, based on the ecological requirements of this species, as warm-climate, arid intervals, correspondent to periods of relative climatic optimum, such as, for instance, the Medieval Warm Period, the Roman Age, the Late Bronze Age and the Copper Age. Consequently, the minima in the abundance of this biomarker could correspond to relatively cooler and more rainy periods. These conclusions are in good agreement with the isotopic and the pollen data. The Last Occurrence (LO) of G. sacculifer has been dated in this work at an average age of 550 years BP, and it is the best bioevent approximating the base of the Little Ice Age in the Adriatic. Recent literature reports the same bioevent in the Levantine Basin, showing a rather consistent age. Therefore, the LO of G. sacculifer has the potential to be extended to all the Eastern Mediterranean. Within the Little Ice Age, benthic foraminifer V. complanata shows two distinct peaks in the shallower Adriatic cores analysed, collected hundred kilometres apart, inside the mud belt environment. Based on the ecological requirements of this species, these two peaks have been interpreted as the more intense (cold and rainy) oscillations inside the LIA. The chronologic framework of the analysed cores is robust, being based on several range-finding 14C AMS ages, on estimates of the secular variation of the magnetic field, on geochemical estimates of the activity depth of 210Pb short-lived radionuclide (for the core-top ages), and is in good agreement with tephrochronologic, pollen and foraminiferal data. The intra-holocenic climate oscillations find out in the Adriatic have been compared with those pointed out in literature from other records of the Northern Hemisphere, and the chronologic constraint seems quite good. Finally, the sedimentary successions analysed allowed the review and the update of the foraminifers’ ecobiostratigraphy available from literature for the Adriatic region, thanks to the achievement of 16 ecobiozones for the last 60 kyr BP. Some bioevents are restricted to the Central Adriatic (for instance the LO of benthic Hyalinea balthica , approximating the MIS3/MIS2 boundary), others occur all over the Adriatic basin (for instance the LO of planktic Globorotalia inflata during MIS3, individuating Dansgaard-Oeschger cycle 8 (Denekamp)).

Utilizzo metrico di immagini panoramiche satellitari CORONA

CAPITOLO 1 INTRODUZIONE Il lavoro presentato è relativo all’utilizzo a fini metrici di immagini satellitari storiche a geometria panoramica; in particolare sono state elaborate immagini satellitari acquisite dalla piattaforma statunitense CORONA, progettata ed impiegata essenzialmente a scopi militari tra gli anni ’60 e ’70 del secolo scorso, e recentemente soggette ad una declassificazione che ne ha consentito l’accesso anche a scopi ed utenti non militari. Il tema del recupero di immagini aeree e satellitari del passato è di grande interesse per un ampio spettro di applicazioni sul territorio, dall’analisi dello sviluppo urbano o in ambito regionale fino ad indagini specifiche locali relative a siti di interesse archeologico, industriale, ambientale. Esiste infatti un grandissimo patrimonio informativo che potrebbe colmare le lacune della documentazione cartografica, di per sé, per ovvi motivi tecnici ed economici, limitata a rappresentare l’evoluzione territoriale in modo asincrono e sporadico, e con “forzature” e limitazioni nel contenuto informativo legate agli scopi ed alle modalità di rappresentazione delle carte nel corso del tempo e per diversi tipi di applicazioni. L’immagine di tipo fotografico offre una rappresentazione completa, ancorché non soggettiva, dell’esistente e può complementare molto efficacemente il dato cartografico o farne le veci laddove questo non esista. La maggior parte del patrimonio di immagini storiche è certamente legata a voli fotogrammetrici che, a partire dai primi decenni del ‘900, hanno interessato vaste aree dei paesi più avanzati, o regioni di interesse a fini bellici. Accanto a queste, ed ovviamente su periodi più vicini a noi, si collocano le immagini acquisite da piattaforma satellitare, tra le quali rivestono un grande interesse quelle realizzate a scopo di spionaggio militare, essendo ad alta risoluzione geometrica e di ottimo dettaglio. Purtroppo, questo ricco patrimonio è ancora oggi in gran parte inaccessibile, anche se recentemente sono state avviate iniziative per permetterne l’accesso a fini civili, in considerazione anche dell’obsolescenza del dato e della disponibilità di altre e migliori fonti di informazione che il moderno telerilevamento ci propone. L’impiego di immagini storiche, siano esse aeree o satellitari, è nella gran parte dei casi di carattere qualitativo, inteso ad investigare sulla presenza o assenza di oggetti o fenomeni, e di rado assume un carattere metrico ed oggettivo, che richiederebbe tra l’altro la conoscenza di dati tecnici (per esempio il certificato di calibrazione nel caso delle camere aerofotogrammetriche) che sono andati perduti o sono inaccessibili. Va ricordato anche che i mezzi di presa dell’epoca erano spesso soggetti a fenomeni di distorsione ottica o altro tipo di degrado delle immagini che ne rendevano difficile un uso metrico. D’altra parte, un utilizzo metrico di queste immagini consentirebbe di conferire all’analisi del territorio e delle modifiche in esso intercorse anche un significato oggettivo che sarebbe essenziale per diversi scopi: per esempio, per potere effettuare misure su oggetti non più esistenti o per potere confrontare con precisione o co-registrare le immagini storiche con quelle attuali opportunamente georeferenziate. Il caso delle immagini Corona è molto interessante, per una serie di specificità che esse presentano: in primo luogo esse associano ad una alta risoluzione (dimensione del pixel a terra fino a 1.80 metri) una ampia copertura a terra (i fotogrammi di alcune missioni coprono strisce lunghe fino a 250 chilometri). Queste due caratteristiche “derivano” dal principio adottato in fase di acquisizione delle immagini stesse, vale a dire la geometria panoramica scelta appunto perché l’unica che consente di associare le due caratteristiche predette e quindi molto indicata ai fini spionaggio. Inoltre, data la numerosità e la frequenza delle missioni all’interno dell’omonimo programma, le serie storiche di questi fotogrammi permettono una ricostruzione “ricca” e “minuziosa” degli assetti territoriali pregressi, data appunto la maggior quantità di informazioni e l’imparzialità associabili ai prodotti fotografici. Va precisato sin dall’inizio come queste immagini, seppur rappresentino una risorsa “storica” notevole (sono datate fra il 1959 ed il 1972 e coprono regioni moto ampie e di grandissimo interesse per analisi territoriali), siano state molto raramente impiegate a scopi metrici. Ciò è probabilmente imputabile al fatto che il loro trattamento a fini metrici non è affatto semplice per tutta una serie di motivi che saranno evidenziati nei capitoli successivi. La sperimentazione condotta nell’ambito della tesi ha avuto due obiettivi primari, uno generale ed uno più particolare: da un lato il tentativo di valutare in senso lato le potenzialità dell’enorme patrimonio rappresentato da tali immagini (reperibili ad un costo basso in confronto a prodotti simili) e dall’altro l’opportunità di indagare la situazione territoriale locale per una zona della Turchia sud orientale (intorno al sito archeologico di Tilmen Höyük) sulla quale è attivo un progetto condotto dall’Università di Bologna (responsabile scientifico il Prof. Nicolò Marchetti del Dipartimento di Archeologia), a cui il DISTART collabora attivamente dal 2005. L’attività è condotta in collaborazione con l’Università di Istanbul ed il Museo Archeologico di Gaziantep. Questo lavoro si inserisce, inoltre, in un’ottica più ampia di quelle esposta, dello studio cioè a carattere regionale della zona in cui si trovano gli scavi archeologici di Tilmen Höyük; la disponibilità di immagini multitemporali su un ampio intervallo temporale, nonché di tipo multi sensore, con dati multispettrali, doterebbe questo studio di strumenti di conoscenza di altissimo interesse per la caratterizzazione dei cambiamenti intercorsi. Per quanto riguarda l’aspetto più generale, mettere a punto una procedura per il trattamento metrico delle immagini CORONA può rivelarsi utile all’intera comunità che ruota attorno al “mondo” dei GIS e del telerilevamento; come prima ricordato tali immagini (che coprono una superficie di quasi due milioni di chilometri quadrati) rappresentano un patrimonio storico fotografico immenso che potrebbe (e dovrebbe) essere utilizzato sia a scopi archeologici, sia come supporto per lo studio, in ambiente GIS, delle dinamiche territoriali di sviluppo di quelle zone in cui sono scarse o addirittura assenti immagini satellitari dati cartografici pregressi. Il lavoro è stato suddiviso in 6 capitoli, di cui il presente costituisce il primo. Il secondo capitolo è stato dedicato alla descrizione sommaria del progetto spaziale CORONA (progetto statunitense condotto a scopo di fotoricognizione del territorio dell’ex Unione Sovietica e delle aree Mediorientali politicamente correlate ad essa); in questa fase vengono riportate notizie in merito alla nascita e all’evoluzione di tale programma, vengono descritti piuttosto dettagliatamente gli aspetti concernenti le ottiche impiegate e le modalità di acquisizione delle immagini, vengono riportati tutti i riferimenti (storici e non) utili a chi volesse approfondire la conoscenza di questo straordinario programma spaziale. Nel terzo capitolo viene presentata una breve discussione in merito alle immagini panoramiche in generale, vale a dire le modalità di acquisizione, gli aspetti geometrici e prospettici alla base del principio panoramico, i pregi ed i difetti di questo tipo di immagini. Vengono inoltre presentati i diversi metodi rintracciabili in bibliografia per la correzione delle immagini panoramiche e quelli impiegati dai diversi autori (pochi per la verità) che hanno scelto di conferire un significato metrico (quindi quantitativo e non solo qualitativo come è accaduto per lungo tempo) alle immagini CORONA. Il quarto capitolo rappresenta una breve descrizione del sito archeologico di Tilmen Höyuk; collocazione geografica, cronologia delle varie campagne di studio che l’hanno riguardato, monumenti e suppellettili rinvenute nell’area e che hanno reso possibili una ricostruzione virtuale dell’aspetto originario della città ed una più profonda comprensione della situazione delle capitali del Mediterraneo durante il periodo del Bronzo Medio. Il quinto capitolo è dedicato allo “scopo” principe del lavoro affrontato, vale a dire la generazione dell’ortofotomosaico relativo alla zona di cui sopra. Dopo un’introduzione teorica in merito alla produzione di questo tipo di prodotto (procedure e trasformazioni utilizzabili, metodi di interpolazione dei pixel, qualità del DEM utilizzato), vengono presentati e commentati i risultati ottenuti, cercando di evidenziare le correlazioni fra gli stessi e le problematiche di diversa natura incontrate nella redazione di questo lavoro di tesi. Nel sesto ed ultimo capitolo sono contenute le conclusioni in merito al lavoro in questa sede presentato. Nell’appendice A vengono riportate le tabelle dei punti di controllo utilizzati in fase di orientamento esterno dei fotogrammi.

Wetland maps including open water extent dynamics based on ENVISAT ASAR WS for Siberia, 2007 and 2008, links to GeoTIFFs

Wetlands store large amounts of carbon, and depending on their status and type, they release specific amounts of methane gas to the atmosphere. The connection between wetland type and methane emission has been investigated in various studies and utilized in climate change monitoring and modelling. For improved estimation of methane emissions, land surface models require information such as the wetland fraction and its dynamics over large areas. Existing datasets of wetland dynamics present the total amount of wetland (fraction) for each model grid cell, but do not discriminate the different wetland types like permanent lakes, periodically inundated areas or peatlands. Wetland types differently influence methane fluxes and thus their contribution to the total wetland fraction should be quantified. Especially wetlands of permafrost regions are expected to have a strong impact on future climate due to soil thawing. In this study ENIVSAT ASAR Wide Swath data was tested for operational monitoring of the distribution of areas with a long-term SW near 1 (hSW) in northern Russia (SW = degree of saturation with water, 1 = saturated), which is a specific characteristic of peatlands. For the whole northern Russia, areas with hSW were delineated and discriminated from dynamic and open water bodies for the years 2007 and 2008. The area identified with this method amounts to approximately 300,000 km**2 in northern Siberia in 2007. It overlaps with zones of high carbon storage. Comparison with a range of related datasets (static and dynamic) showed that hSW represents not only peatlands but also temporary wetlands associated with post-forest fire conditions in permafrost regions. Annual long-term monitoring of change in boreal and tundra environments is possible with the presented approach. Sentinel-1, the successor of ENVISAT ASAR, will provide data that may allow continuous monitoring of these wetland dynamics in the future complementing global observations of wetland fraction.