Continuous fungal treatment of non-sterile veterinary hospital effluent: pharmaceuticals removal and microbial community assessment

Source point treatment of effluents with a high load of pharmaceutical active compounds (PhACs), such as hospital wastewater, is a matter of discussion among the scientific community. Fungal treatments have been reported to be successful in degrading this type of pollutants and, therefore, the white-rot fungus Trametes versicolor was applied for the removal of PhACs from veterinary hospital wastewater. Sixty-six percent removal was achieved in a non-sterile batch bioreactor inoculated with T. versicolor pellets. On the other hand, the study of microbial communities by means of DGGE and phylogenetic analyses led us to identify some microbial interactions and helped us moving to a continuous process. PhAC removal efficiency achieved in the fungal treatment operated in non-sterile continuous mode was 44 % after adjusting the C/N ratio with respect to the previously calculated one for sterile treatments. Fungal and bacterial communities in the continuous bioreactors were monitored as well.

Removal of tetracycline from contaminated water by Moringa oleifera seed preparations

The aim of this study was to evaluate tetracycline antibiotic (TA) removal from contaminated water by Moringa oleifera seed preparations. The composition of synthetic water approximate river natural contaminated water and TA simulated its presence as an emerging pollutant. Interactions between TA and protein preparations (extract; fraction and lectin) were also evaluated. TA was determined by solid phase extraction followed by high performance liquid chromatography - mass spectrometry. Moringa extract and flour removed TA from water. Extract removed TA in all concentrations and better removal (40%) was obtained with 40 mg L1; seed flour (particles < 5mm), 1.25 g L1 and 2.50 g L1 removed 28 and 29% of tetracycline, respectively; particles > 5 mm (0.50 g L1) removed 55% of antibiotic. Interactions between TA and seed preparations were assayed by haemagglutinating activity (HA). Specific HA (SHA) of extract (pH 7) was abolished with tetracycline (5 mg L1); fraction (75%) and lectin HA (97%) were inhibited with TA. Extract SHA decreased by 75% at pH 8. Zeta potential (ZP) of extract 700 mg L1 and tetracycline 50 mg L1 , pH range 5 to 8, showed different results. Extract ZP was more negative (10.73 mV to 16.00 mV) than tetracycline ZP (0.27 mV to 20.15 mV); ZP difference was greater in pH 8. The focus of this study was achieved since moringa preparations removed TA from water and compounds interacting with tetracycline involved at least lectin binding sites. This is a natural process, which do not promote environmental damage.

Evaluation of zearalenone in vitro removal by Saccharomyces cerevisiae strains isolated from bovine forage

Zearalenone (ZEN) is a mycotoxin that has relatively low acute toxicity. However, it is a potent oestrogen, interfering with the reproductive tract of animals. Among other effects, ZEN decreases animals fertility, and induces fibrosis in the uterus, breast cancer and endometrial carcinoma (Zinedine et al., 2007). Anti-mycotoxin additives (AMA) are defined as a group of products that, when added to animal feed, are capable of adsorbing, inactivating, or neutralizing mycotoxins in the gastrointestinal tract of animals. One example of these products are adsorbents based on yeast cell walls, a safe and beneficial animal feed additive (Abreu et al., 2008). When based on active cells, yeast based products also act as a probiotic, contributing to improve the general animal health because it stimulates their immune system and promotes the integrity of intestinal mucosa (Albino et al., 2006). Strains of Saccharomyces cerevisiae isolated from silage were tested for their ZEN removal capability. Their effect on - and b-zearalenol (-ZOL and b-ZOL) was also tested. Strains were grown on YPD separately supplemented with ZEN, -ZOL and b-ZOL, and their elimination from culture media was quantified over time by HPLC-FL.

Removal of ochratoxin A from contaminated white and red wines using oenological fining agents

Mycotoxins are toxic secondary metabolites produced by certain moulds, being ochratoxin A (OTA) one of the most relevant. Its chemical structure is a dihydro-isocoumarin connected at the 7-carboxy group to a molecule of L--phenylalanine via an amide bond. OTA contamination of wines might be a risk to consumer health, thus requiring treatments to achieve acceptable standards for human consumption [1]. According to the Regulation No. 1881/2006 of the European Commission, the maximum limit for OTA in wine is 2 µg/kg [2]. Therefore, the aim of this work was to know the effect of different fining agents on OTA removal, as well as their impact on white and red wine physicochemical characteristics. To evaluate their efficiency, 11 commercial fining agents (mineral, synthetic, animal and vegetable proteins) were used to get new approaches on OTA removal from white and red wines. Trials were performed in wines artificially supplemented (at a final concentration of 10 µg/L) with OTA. The most effective fining agent in removing OTA (80%) from white wine was a commercial formulation that contains gelatine, bentonite and activated carbon. Removals between 10-30% were obtained with potassium caseinate, yeast cell walls and pea protein. With bentonites, carboxymethylcellulose, polyvinylpolypyrrolidone and chitosan no considerable OTA removal was verified. In red wine, removals between 6-19% were obtained with egg albumin, yeast cell walls, pea protein, isinglass, gelatine, polyvinylpolypyrrolidone and chitosan. The most effective fining agents in removing OTA from red wine were an activated carbon (66%) followed again by the commercial formulation (55%), being activated carbon a well-known adsorbent of mycotoxins. These results may provide useful information for winemakers, namely for the selection of the most appropriate oenological product for OTA removal, reducing wine toxicity and simultaneously enhancing food safety and wine quality.

Food safety in wine: removal of ochratoxin A in contaminated white wine using commercial fining agents

The presence of mycotoxins in foodstuff is a matter of concern for food safety. Mycotoxins are toxic secondary metabolites produced by certain molds, being ochratoxin A (OTA) one of the most relevant. Wines can also be contaminated with these toxicants. Several authors have demonstrated the presence of mycotoxins in wine, especially ochratoxin A (OTA) [1]. Its chemical structure is a dihydro-isocoumarin connected at the 7-carboxy group to a molecule of L--phenylalanine via an amide bond. As these toxicants can never be completely removed from the food chain, many countries have defined levels in food in order to attend health concerns. OTA contamination of wines might be a risk to consumer health, thus requiring treatments to achieve acceptable standards for human consumption [2]. The maximum acceptable level of OTA in wines is 2.0 g/kg according to the Commission regulation No. 1881/2006 [3]. Therefore, the aim of this work was to reduce OTA to safer levels using different fining agents, as well as their impact on white wine physicochemical characteristics. To evaluate their efficiency, 11 commercial fining agents (mineral, synthetic, animal and vegetable proteins) were used to get new approaches on OTA removal from white wine. Trials (including a control without addition of a fining agent) were performed in white wine artificially supplemented with OTA (10 µg/L). OTA analysis were performed after wine fining. Wine was centrifuged at 4000 rpm for 10 min and 1 mL of the supernatant was collected and added of an equal volume of acetonitrile/methanol/acetic acid (78:20:2 v/v/v). Also, the solid fractions obtained after fining, were centrifuged (4000 rpm, 15 min), the resulting supernatant discarded, and the pellet extracted with 1 mL of the above solution and 1 mL of H2O. OTA analysis was performed by HPLC with fluorescence detection according to Abrunhosa and Venâncio [4]. The most effective fining agent in removing OTA (80%) from white wine was a commercial formulation that contains gelatine, bentonite and activated carbon. Removals between 10-30% were obtained with potassium caseinate, yeast cell walls and pea protein. With bentonites, carboxymethylcellulose, polyvinylpolypyrrolidone and chitosan no considerable OTA removal was verified. Following, the effectiveness of seven commercial activated carbons was also evaluated and compared with the commercial formulation that contains gelatine, bentonite and activated carbon. The different activated carbons were applied at the concentration recommended by the manufacturer in order to evaluate their efficiency in reducing OTA levels. Trial and OTA analysis were performed as explained previously. The results showed that in white wine all activated carbons except one reduced 100% of OTA. The commercial formulation that contains gelatine, bentonite and activated carbon (C8) reduced only 73% of OTA concentration. These results may provide useful information for winemakers, namely for the selection of the most appropriate oenological product for OTA removal, reducing wine toxicity and simultaneously enhancing food safety and wine quality.

A design of experiments to assess phosphorous removal and crystal properties in struvite precipitation of source separated urine using different Mg sources

Supplementary data associated with this article can be found, in the online version, at: http://dx.doi.org/10.1016/j.cej.2016.03.148.

Influence of ischemic preconditioning in myocardial protection in patients undergoing myocardial revascularization with intermittent crossclamping of the aorta. Analysis of ions and blood gases

OBJECTIVE: To test the hypothesis that short periods of ischemia may increase the myocardial protection obtained with intermittent crossclamping of the aorta. METHODS: In the control group (18 patients), surgery was performed with systemic hypothermia at 32ºC and intermittent crossclamping of the aorta. Extracorporeal circulation was used. In the preconditioning group (17 patients), 2 crossclampings of the aorta lasting 3min each were added prior to the intermittent crossclamping of the conventional technique with an interval of 2min of reperfusion between them. Blood samples for analyses of pH, pCO2, pO2, sodium, potassium, calcium, and magnesium were obtained from the coronary sinus at the beginning of extracorporeal circulation (time 1), at the end of the first anastomosis (time 2), and at the end of extracorporeal circulation (time 3). RESULTS: No difference was observed in the results of the 2 groups, except for a variation in the ionic values in the different times of blood withdrawal; sodium values, however, remained stable. All patients had a good clinical outcome. CONCLUSION: The results of intermittent crossclamping of the aorta with moderate hypothermia were not altered by the use of ischemic preconditioning.

Impacto de las prácticas agrícolas en los recursos hídricos de la provincia de Córdoba: aislamiento y caracterización de bacterias degradadoras de pesticidas para su utilización en procesos de biorremediación. Impact of agricultural activities on aquatic environments of Córdoba: isolation and characterization of bacteria with pesticide removal capacities for bioremediation treatments.

Los sistemas de agua dulce constituyen fuentes vitales para el desarrollo de la vida. Entre otras causas, el excesivo y poco controlado uso de pesticidas por las prácticas agrícolas modernas ha contribuido con la degradación de estos ecosistemas en la provincia de Córdoba (Secretaría de Ambiente, 2008). Los pesticidas son compuestos tóxicos y químicamente estables en el ambiente. Diversas especies microbianas presentan la capacidad para mineralizar dichos compuestos, siendo uno de los mecanismos de descomposición más importante. En el presente trabajo se pretende (1) Detectar y cuantificar principios activos de pesticidas en diferentes aguas ambientales de la región centro-sur de la provincia de Córdoba; (2) Aislar y caracterizar especies bacterianas a partir de muestras de aguas superficiales y subterráneas de la región que demuestren ser eficientes en la biodegradación de diferentes pesticidas. Para ello, se estudiará la presencia de 10 pesticidas organoclorados y organofosforados (lindano, 2,4D, DDT, p,p-DDE, �-endosulfán, �-endosulfán, clorpirifós, dimetoato) y herbicidas (atrazina) en muestras de agua superficiales y subterráneas (8 - 12m de profundidad) de la región agrícola centro-sur de Córdoba. Se establecerán diferentes puntos de muestreo en las principales cuencas hidrográficas: Río Tercero y Embalse de Río Tercero, Canal Desviador de Bell Ville, Laguna La Salada, Río Saladillo, Río Carcarañá y Río Cuarto. La determinación de pesticidas se realizará mediante Cromatografía de Gases (GC). Conjuntamente, se realizará el aislamiento de microorganismos a partir de las muestras de agua suplementadas con diferentes concentraciones de pesticidas (López et al., 2005) y se procederá a la caracterización morfológica y bioquímica (Lechevalier, 1989). Se realizarán curvas de crecimiento (DO600) y se determinará la viabilidad celular mediante el método de recuento en placa. El potencial catabólico de cada aislamiento se determinará analizando la concentración residual de pesticidas en el sobrenadante de los cultivos (Benimeli et al, 2003) y mediante ensayos de resting-cell (Hernández et al, 2008). Finalmente se realizará la caracterización genética (Weisburg, 1991) de los aislamientos que demuestren una mayor eficiencia en la biodegradación de pesticidas. El presente estudio pretende abordar una temática prioritaria como es la contaminación ambiental de ecosistemas acuáticos de la provincia de Córdoba. la detección de principios activos de pesticidas sería, por lo tanto, un indicador de contaminación de origen antropológica y brindaría información respecto al deterioro de la calidad del agua. Por otra parte, el aislamiento de bacterias adaptadas a las condiciones ecológicas de la región y capaces de metabolizar eficientemente diferentes pesticidas como fuentes de carbono y energía sería beneficioso para su utilización en futuros ensayos de biorremediación.

Some results of study of variations of light ions concentration and their connections with the ionizing radiation and sub-micron aerosol content in air under the conditions of Tbilisi city

Results of analysis of variations of sum light ions concentration and their connections with radon, galactic cosmic rays intensity and content of sub-micron aerosols by diameter ≥ 0.1 micron in surface boundary layer of Tbilisi city are given.

The Feedback Effect of Intensity of Ionizing Radiation With the Light Ions Content in Atmosphere. Paradox (the Tbilisi Type of a Smog), or Usual Phenomenon for the Strongly Pollution Cities?.

თბილისში მსუბუქი იონების, რადონის და გალაქტიკური კოსმოსური სხივების ნეიტრონული კომპონენტის ინტენსივობის 2009-2010 წლებში კომპლექსური მონიტორინგის მონაცემების მიხედვით გამოვლენილია მაიონიზებელი გამოსხივების ინტენსივობისა და ატმოსფეროში მსუბუქი იონების შემცველობის უკუკავშირის ეფექტი.

Negative Correlation Between of Light Ions Content and Radon Concentration: Particularity of Tbilisi City Air Pollution, or Norm for the Urbanized Locality?

In Tbilisi according to the data of the complex monitoring of light ions concentration, radon and sub-micron aerosols the effect of feedback of intensity of ionizing radiation with the light ions content in atmosphere is discovered.

Comparative Characteristics of Light Ions Content in the Urban and Ecologically Clean Locality in Georgia

The results of the stationary and expeditionary investigations of the light ions content in surface boundary layer in the urban and ecologically clean locality for different regions of Georgia are represented.

Analysis and removal of code clones in software product lines

Magdeburg, Univ., Fak. für Informatik, Diss., 2013

Determinació de la ubicació estructural dels ions Yb3+ i Nb3+ en Yb:RTP, Nb:RTP i (Nb,Yb):RTP

Estudi elaborat a partir d’una estada al Stony Brook University al juliol del 2006. El RbTiOPO4 (RTP) monocristal•lí és un material d' òptica no lineal molt rellevant i utilitzat en la tecnologia làser actual, químicament molt estable i amb unes propietats físiques molt destacades, entre elles destaquen els alts coeficients electro-òptics i l'alt llindar de dany òptic que presenta. En els últims anys s’està utilitzant tecnològicament en aplicacions d'òptica no lineal en general i electro-òptiques en particular. En alguns casos ja ha substituït, millorant prestacions, a materials tals com el KTP o el LNB(1). Dopant RTP amb ions lantànids (Ln3+) (2-4), el material es converteix en un material làser auto-doblador de freqüència, combinant les seves propietats no lineals amb les de matriu làser. El RTP genera radiació de segon harmònic (SHG) a partir d’un feix fonamental amb longituds d’ona inferiors a 990 nm, que és el límit que presenta el KTP.La determinació de la ubicació estructural i l’estudi de l'entorn local del ions actius làser és de fonamental importància per a la correcta interpretació de les propietats espectroscòpiques d’aquest material. Mesures de difracció de neutrons sobre mostra de pols cristal•lí mostren que els ions Nb5+ i Ln3+ només substitueixin posicions de Ti4+ (8-9). Estudis molt recents d'EPR (electron paramagnetic resonance) semblen indicar que quan la concentració d'ió Ln3+ es baixa, aquest ió presenta la tendència a substituir l'ió alcalí present a l'estructura (10).Després dels resultats obtinguts en el present treball a partir de la tècnica EXAFS a la instal•lació sincrotò del Brookhaven National Laboratory/State University of New York (Stony Brook) es pot concloure definitivament que els ions Nb s’ubiquen en la posició Ti (1) i que els ions Yb3+ es distribueixen paritariament en les dues posicions del Ti (1 i 2). Aquests resultats aporten una valuosa informació per a la correcta interpretació dels espectres, tant d’absorció com d’emissió, del material i per la avaluació dels paràmetres del seu comportament durant l'acció làser.

Taux sanguins et sériques d'ions métalliques chez les patients porteurs de PHTs à col modulaire - une étude de cohorte prospective comparative

Les évidences s'accumulent concernant des problèmes de corrosion touchant les prothèses à col modulaires. Plusieurs études récentes révèlent des taux d'ions métalliques élevés. Le but de cette étude était de comparer les taux d'ions métalliques (Co, Cr, Mo, Ti), dans le sérum, chez des porteurs de prothèses à col modulaire, à tige monobloc, ainsi que sans implant. Méthodes Nous avons recruté 60 patients, dont 50 porteurs d'une PTH, unilatérale, sans aucun autre implant, non-cimentée, avec tête en céramique, à minimum 1 année postopératoire. Quarante avaient une tige SPS (Symbios) (Ti6Al4 V) modulaire (col en CoCr) et 10 une SPS monobloc (non-modulaire). Les cupules étaient toutes en alliage de Ti (Ti6Al4 V) avec insert céramique ou PE. Nous avons constitué un groupe témoin sans aucun implant. Dans le groupe o modulaires O, le col a été choisi en préopératoire sur la base d'une planification 3D et assemblé à sec avant implantation. Nous avons prélevé un échantillon sérique, un autre sanguin, qui ont été analysés par spectrométrie de masse, permettant une détermination atomique quantitative. Le résultat clinique a été estimé à l'aide du o Oxford Hip Score O. Résultats Nous avons trouvé un Co sérique moyen à 1,54 Ig L dans le groupe O modulaires O et à 0,32 Ig L dans le groupe o monobloc O avec un p < 0,001. Pour le Cr, on a 1,12 Ig L (modulaires) vs 0,60 Ig L (monoblocs) avec un p < 0,001, pour le Ti 31 Ig L (modulaires) vs 22 Ig L (monoblocs) avec p < 0,001 et pour le Mo, 0,96 Ig L (modulaires) vs 0,74 (monoblocs) avec p = 0,254. Deux patients avaient des valeurs de Co supérieures à 7 Ig L et 11 étaient au-dessus de 1 Ig L, valeur considérée comme limite. Les valeurs dans le sang complet étaient similaires. Nous n'avons pas trouvé de différence significative selon les types de col modulaires (longs vs courts et rétro vs normaux). Curieusement, le taux de Cr était significativement plus élevé chez les patients sans aucun implant que chez les porteurs de SPS monobloc, par contre les différences n'étaient pas significatives pour les autres éléments. Conclusion Les taux sériques et sanguins de ions Co, Cr et Ti étaient significativement plus élevés dans le groupe des patients avec col modulaire, avec 2 valeurs 40 extrêmement hautes et plus de la moitié (11 40) anormalement hautes. Bien que ces valeurs soient inférieures à celles d'autres études, nous avons arrêter d'utiliser de tiges à cols modulaires, et avons initié un suivi annuel des patients porteurs, similaire à celui instauré pour les grosses têtes métal-métal.