The Use of Situation Representation when Searching for Solutions in Computer Aided Design Systems

Projects solutions reuse methodology is offered for software development. The main idea consists in connection of the system objective with the situation using the entities which describe the condition of the system in the process of the objective statement. Every situation is associated with one or several design solutions, which can be used at the development. Based on this connection the situation representing language has been created, it lets to express a problem situation using a natural language describe. The similarity measure has been built to compare situations, it is based on the similarity coefficients with adding the absent part weight.

A longitudinal evaluation of the acceptability and impact of a diet diary app for older adults with age-related macular degeneration

Ongoing advances in technology are increasing the scope for enhancing and supporting older adults’ daily living. The digital divide between older and younger adults raises concerns, however, about the suitability of technological solutions for older adults, especially for those with impairments. Taking older adults with Age-Related Macular Degeneration (AMD) as a case study, we used user-centred and participatory design approaches to develop an assistive mobile app for self-monitoring their intake of food [12,13]. In this paper we report on findings of a longitudinal field evaluation of our app that was conducted to investigate how it was received and adopted by older adults with AMD and its impact on their lives. Demonstrating the benefit of applying inclusive design methods for technology for older adults, our findings reveal how the use of the app raises participants’ awareness and facilitates self-monitoring of diet, encourages positive (diet) behaviour change, and encourages learning.

2nd workshop on designing with older adults:towards a complete methodology

The ageing process can interfere considerably with the use of mobile devices, e.g. due to changes in vision, attention, and motor control. Designing mobile technology with older adults poses its own challenges. In the absence of a complete methodology for working with older users, researchers and designers are often left to improvise their own methods. This can result in co-design relationships being compromised and weak design insights emerging. How can we best adapt or modify existing methods for working with this group?

Munkahelyi tanulást befolyásoló tényezők – humán-számítógép együttműködés vizsgálata (Influencing factors of on-the-job learning – Analysis of human-computer collaboration)

A komplex, dinamikus, tudásalapú társadalomban nemcsak a tanulás formái, hanem a tanulás helyszínei is módosulnak, s a munkahely tanulásban betöltött szerepe felértékelődött. A munkahelyi környezet is számos átalakuláson esett át, az információs és kommunikációs technológiák (IKT) fejlődésével egyidejűleg lehetővé vált többek között a távmunka, jelentősen átformálva a munkavégzés és a munkahelyi interakciók módját. A kutatók arra keresték a választ kutatásukban, hogy a szervezeten belül milyen tényezők támogatják vagy gátolják a munkahelyi tanulást. A kutatás fő üzenete, hogy a tanulás keretrendszere, az egyéni képességek és az észlelt tanulási szituáció együttesen határozza meg a munkahelyi tanulást. A kutatók eredményüket kvalitatív kutatással feltárt három esettanulmányon keresztül ismertetik. ____ In a knowledge-based society not only the forms of learning have been changed but also the places of learning. The role of workplace in the learning process is becoming more important. Meantime, there has been a substantial change in the working conditions as the development in information and communication technologies (ICTs) makes it possible to telecommute transforming remarkably the way of working and the interactions at the workplace. The central question of the research is which intra-organizational factors support or hinder onthe- job learning. The main message of the research is that the learning framework, the individual cognitive competences and the perceived learning situation influence collectively on-the-job learning. Authors present the results of the qualitative research though three case studies.

A digital signal processing approach for affective sensing of a computer user through pupil diameter monitoring

Recent research has indicated that the pupil diameter (PD) in humans varies with their affective states. However, this signal has not been fully investigated for affective sensing purposes in human-computer interaction systems. This may be due to the dominant separate effect of the pupillary light reflex (PLR), which shrinks the pupil when light intensity increases. In this dissertation, an adaptive interference canceller (AIC) system using the H∞ time-varying (HITV) adaptive algorithm was developed to minimize the impact of the PLR on the measured pupil diameter signal. The modified pupil diameter (MPD) signal, obtained from the AIC was expected to reflect primarily the pupillary affective responses (PAR) of the subject. Additional manipulations of the AIC output resulted in a processed MPD (PMPD) signal, from which a classification feature, PMPDmean, was extracted. This feature was used to train and test a support vector machine (SVM), for the identification of stress states in the subject from whom the pupil diameter signal was recorded, achieving an accuracy rate of 77.78%. The advantages of affective recognition through the PD signal were verified by comparatively investigating the classification of stress and relaxation states through features derived from the simultaneously recorded galvanic skin response (GSR) and blood volume pulse (BVP) signals, with and without the PD feature. The discriminating potential of each individual feature extracted from GSR, BVP and PD was studied by analysis of its receiver operating characteristic (ROC) curve. The ROC curve found for the PMPDmean feature encompassed the largest area (0.8546) of all the single-feature ROCs investigated. The encouraging results seen in affective sensing based on pupil diameter monitoring were obtained in spite of intermittent illumination increases purposely introduced during the experiments. Therefore, these results confirmed the benefits of using the AIC implementation with the HITV adaptive algorithm to isolate the PAR and the potential of using PD monitoring to sense the evolving affective states of a computer user.

Computer interaction : its effect on attitude and performance in older adults

This study examined the interaction of age, attitude, and performance within the context of an interactive computer testing experience. Subjects were 13 males and 47 females between the ages of 55 and 82, with a minimum of a high school education. Initial attitudes toward computers, as measured by the Cybernetics Attitude Scale (CAS), demonstrated overall equivalence between these older subjects and previously tested younger subjects. Post-intervention scores on the CAS indicated that attitudes toward computers were unaffected by either a "fun" or a "challenging" computer interaction experience. The differential effects of a computerized vs. a paperand- pencil presentation format of a 20-item, multiple choice vocabulary test were examined. Results indicated no significant differences in the performance of subjects in the two conditions, and no interaction effect between attitude and performance. These findings suggest that the attitudes of older adults towards computers do not affect their computerized testing performance, at least for short term testing of verbal abilities. A further implication is that, under the conditions presented here, older subjects appear to be unaffected by mode of testing. The impact of recent advanced in technology on older adults is discussed.

3D navigation with six degrees-of-freedom using a multi-touch display

With the introduction of new input devices, such as multi-touch surface displays, the Nintendo WiiMote, the Microsoft Kinect, and the Leap Motion sensor, among others, the field of Human-Computer Interaction (HCI) finds itself at an important crossroads that requires solving new challenges. Given the amount of three-dimensional (3D) data available today, 3D navigation plays an important role in 3D User Interfaces (3DUI). This dissertation deals with multi-touch, 3D navigation, and how users can explore 3D virtual worlds using a multi-touch, non-stereo, desktop display. ^ The contributions of this dissertation include a feature-extraction algorithm for multi-touch displays (FETOUCH), a multi-touch and gyroscope interaction technique (GyroTouch), a theoretical model for multi-touch interaction using high-level Petri Nets (PeNTa), an algorithm to resolve ambiguities in the multi-touch gesture classification process (Yield), a proposed technique for navigational experiments (FaNS), a proposed gesture (Hold-and-Roll), and an experiment prototype for 3D navigation (3DNav). The verification experiment for 3DNav was conducted with 30 human-subjects of both genders. The experiment used the 3DNav prototype to present a pseudo-universe, where each user was required to find five objects using the multi-touch display and five objects using a game controller (GamePad). For the multi-touch display, 3DNav used a commercial library called GestureWorks in conjunction with Yield to resolve the ambiguity posed by the multiplicity of gestures reported by the initial classification. The experiment compared both devices. The task completion time with multi-touch was slightly shorter, but the difference was not statistically significant. The design of experiment also included an equation that determined the level of video game console expertise of the subjects, which was used to break down users into two groups: casual users and experienced users. The study found that experienced gamers performed significantly faster with the GamePad than casual users. When looking at the groups separately, casual gamers performed significantly better using the multi-touch display, compared to the GamePad. Additional results are found in this dissertation.^

A Digital Signal Processing Approach for Affective Sensing of a Computer User through Pupil Diameter Monitoring

Recent research has indicated that the pupil diameter (PD) in humans varies with their affective states. However, this signal has not been fully investigated for affective sensing purposes in human-computer interaction systems. This may be due to the dominant separate effect of the pupillary light reflex (PLR), which shrinks the pupil when light intensity increases. In this dissertation, an adaptive interference canceller (AIC) system using the H∞ time-varying (HITV) adaptive algorithm was developed to minimize the impact of the PLR on the measured pupil diameter signal. The modified pupil diameter (MPD) signal, obtained from the AIC was expected to reflect primarily the pupillary affective responses (PAR) of the subject. Additional manipulations of the AIC output resulted in a processed MPD (PMPD) signal, from which a classification feature, PMPDmean, was extracted. This feature was used to train and test a support vector machine (SVM), for the identification of stress states in the subject from whom the pupil diameter signal was recorded, achieving an accuracy rate of 77.78%. The advantages of affective recognition through the PD signal were verified by comparatively investigating the classification of stress and relaxation states through features derived from the simultaneously recorded galvanic skin response (GSR) and blood volume pulse (BVP) signals, with and without the PD feature. The discriminating potential of each individual feature extracted from GSR, BVP and PD was studied by analysis of its receiver operating characteristic (ROC) curve. The ROC curve found for the PMPDmean feature encompassed the largest area (0.8546) of all the single-feature ROCs investigated. The encouraging results seen in affective sensing based on pupil diameter monitoring were obtained in spite of intermittent illumination increases purposely introduced during the experiments. Therefore, these results confirmed the benefits of using the AIC implementation with the HITV adaptive algorithm to isolate the PAR and the potential of using PD monitoring to sense the evolving affective states of a computer user.

DiCER: A distributed consumer experience research method for use in public spaces

Date of Acceptance: 06/03/2015 Acknowledgement: This research was funded by NCR and the Northern Research Partnership

DiCER: A distributed consumer experience research method for use in public spaces

Date of Acceptance: 06/03/2015 Acknowledgement: This research was funded by NCR and the Northern Research Partnership

DiCER: A distributed consumer experience research method for use in public spaces

Date of Acceptance: 06/03/2015 Acknowledgement: This research was funded by NCR and the Northern Research Partnership

Accuracy of computer-aided design/computer-assisted manufacture (CAD/CAM) fabricated dental restorations: a comparative study

Introduction: Computer-Aided-Design (CAD) and Computer-Aided-Manufacture (CAM) has been developed to fabricate fixed dental restorations accurately, faster and improve cost effectiveness of manufacture when compared to the conventional method. Two main methods exist in dental CAD/CAM technology: the subtractive and additive methods. While fitting accuracy of both methods has been explored, no study yet has compared the fabricated restoration (CAM output) to its CAD in terms of accuracy. The aim of this present study was to compare the output of various dental CAM routes to a sole initial CAD and establish the accuracy of fabrication. The internal fit of the various CAM routes were also investigated. The null hypotheses tested were: 1) no significant differences observed between the CAM output to the CAD and 2) no significant differences observed between the various CAM routes. Methods: An aluminium master model of a standard premolar preparation was scanned with a contact dental scanner (Incise, Renishaw, UK). A single CAD was created on the scanned master model (InciseCAD software, V2.5.0.140, UK). Twenty copings were then fabricated by sending the single CAD to a multitude of CAM routes. The copings were grouped (n=5) as: Laser sintered CoCrMo (LS), 5-axis milled CoCrMo (MCoCrMo), 3-axis milled zirconia (ZAx3) and 4-axis milled zirconia (ZAx4). All copings were micro-CT scanned (Phoenix X-Ray, Nanotom-S, Germany, power: 155kV, current: 60µA, 3600 projections) to produce 3-Dimensional (3D) models. A novel methodology was created to superimpose the micro-CT scans with the CAD (GOM Inspect software, V7.5SR2, Germany) to indicate inaccuracies in manufacturing. The accuracy in terms of coping volume was explored. The distances from the surfaces of the micro-CT 3D models to the surfaces of the CAD model (CAD Deviation) were investigated after creating surface colour deviation maps. Localised digital sections of the deviations (Occlusal, Axial and Cervical) and selected focussed areas were then quantitatively measured using software (GOM Inspect software, Germany). A novel methodology was also explored to digitally align (Rhino software, V5, USA) the micro-CT scans with the master model to investigate internal fit. Fifty digital cross sections of the aligned scans were created. Point-to-point distances were measured at 5 levels at each cross section. The five levels were: Vertical Marginal Fit (VF), Absolute Marginal Fit (AM), Axio-margin Fit (AMF), Axial Fit (AF) and Occlusal Fit (OF). Results: The results of the volume measurement were summarised as: VM-CoCrMo (62.8mm3 ) > VZax3 (59.4mm3 ) > VCAD (57mm3 ) > VZax4 (56.1mm3 ) > VLS (52.5mm3 ) and were all significantly different (p presented as areas with different colour. No significant differences were observed at the internal aspect of the cervical aspect between all groups of copings. Significant differences (p< M-CoCrMo Internal Occlusal, Internal Axial and External Axial 2 ZAx3 > ZAx4 External Occlusal, External Cervical 3 ZAx3 < ZAx4 Internal Occlusal 4 M-CoCrMo > ZAx4 Internal Occlusal and Internal Axial The mean values of AMF and AF were significantly (p M-CoCrMo and CAD > ZAx4. Only VF of M-CoCrMo was comparable with the CAD Internal Fit. All VF and AM values were within the clinically acceptable fit (120µm). Conclusion: The investigated CAM methods reproduced the CAD accurately at the internal cervical aspect of the copings. However, localised deviations at axial and occlusal aspects of the copings may suggest the need for modifications in these areas prior to fitting and veneering with porcelain. The CAM groups evaluated also showed different levels of Internal Fit thus rejecting the null hypotheses. The novel non-destructive methodologies for CAD/CAM accuracy and internal fit testing presented in this thesis may be a useful evaluation tool for similar applications.

3D Navigation with Six Degrees-of-Freedom using a Multi-Touch Display

With the introduction of new input devices, such as multi-touch surface displays, the Nintendo WiiMote, the Microsoft Kinect, and the Leap Motion sensor, among others, the field of Human-Computer Interaction (HCI) finds itself at an important crossroads that requires solving new challenges. Given the amount of three-dimensional (3D) data available today, 3D navigation plays an important role in 3D User Interfaces (3DUI). This dissertation deals with multi-touch, 3D navigation, and how users can explore 3D virtual worlds using a multi-touch, non-stereo, desktop display. The contributions of this dissertation include a feature-extraction algorithm for multi-touch displays (FETOUCH), a multi-touch and gyroscope interaction technique (GyroTouch), a theoretical model for multi-touch interaction using high-level Petri Nets (PeNTa), an algorithm to resolve ambiguities in the multi-touch gesture classification process (Yield), a proposed technique for navigational experiments (FaNS), a proposed gesture (Hold-and-Roll), and an experiment prototype for 3D navigation (3DNav). The verification experiment for 3DNav was conducted with 30 human-subjects of both genders. The experiment used the 3DNav prototype to present a pseudo-universe, where each user was required to find five objects using the multi-touch display and five objects using a game controller (GamePad). For the multi-touch display, 3DNav used a commercial library called GestureWorks in conjunction with Yield to resolve the ambiguity posed by the multiplicity of gestures reported by the initial classification. The experiment compared both devices. The task completion time with multi-touch was slightly shorter, but the difference was not statistically significant. The design of experiment also included an equation that determined the level of video game console expertise of the subjects, which was used to break down users into two groups: casual users and experienced users. The study found that experienced gamers performed significantly faster with the GamePad than casual users. When looking at the groups separately, casual gamers performed significantly better using the multi-touch display, compared to the GamePad. Additional results are found in this dissertation.

The Use of Nudges in Exergames to Moderate Player Exertion

Exergames are digital games with a physical exertion component. Exergames can help motivate fitness in people not inclined toward exercise. However, players of exergames sometimes over-exert, risking adverse health effects. These players must be told to slow down, but doing so may distract them from gameplay and diminish their desire to keep exercising. In this thesis we apply the concept of nudges—indirect suggestions that gently push people toward a desired behaviour—to keeping exergame players from over-exerting. We describe the effective use of nudges through a set of four design principles: natural integration, comprehension, progression, and multiple channels. We describe two exergames modified to use nudges to persuade players to slow down, and describe the studies evaluating the use of nudges in these games. PlaneGame shows that nudges can be as effective as an explicit textual display to control player over-exertion. Gekku Race demonstrates that nudges are not necessarily effective when players have a strong incentive to over-exert. However, Gekku Race also shows that, even in high-energy games, the power of nudges can be maintained by adding negative consequences to the nudges. We use the term "shove" to describe a nudge using negative consequences to increase its pressure. We were concerned that making players slow down would damage their immersion—the feeling of being engaged with a game. However, testing showed no loss of immersion through the use of nudges to reduce exertion. Players reported that the nudges and shoves motivated them to slow down when they were over-exerting, and fit naturally into the games.

Exploring problem-framing through behavioural heuristics

Design for behaviour change aims to influence user behaviour, through design, for social or environmental benefit. Understanding and modelling human behaviour has thus come within the scope of designers’work, as in interaction design, service design and user experience design more generally. Diverse approaches to how to model users when seeking to influence behaviour can result in many possible strategies, but a major challenge for the field is matching appropriate design strategies to particular behaviours (Zachrisson & Boks, 2012). In this paper, we introduce and explore behavioural heuristics as a way of framing problem-solution pairs (Dorst & Cross, 2001) in terms of simple rules. These act as a ‘common language’ between insights from user research and design principles and techniques, and draw on ideas from human factors, behavioural economics, and decision research. We introduce the process via a case study on interaction with office heating systems, based on interviews with 16 people. This is followed by worked examples in the ‘other direction’, based on a workshop held at the Interaction ’12 conference, extracting heuristics from existing systems designed to influence user behaviour, to illustrate both ends of a possible design process using heuristics.