α-Pinene oxide and verbenol oxide isomerizations over heterogeneous catalysts

Terpenes are a valuable natural resource for the production of fine chemicals. Turpentine, obtained from biomass and also as a side product of softwood industry, is rich in monoterpenes such as α-pinene and β-pinene, which are widely used as raw materials in the synthesis of flavors, fragrances and pharmaceutical compounds. The rearrangement of their epoxides has been thoroughly studied in recent years, as a method to obtain compounds which are further used in the fine chemical industry. The industrially most desired products of α-pinene oxide isomerization are campholenic aldehyde and trans-carveol. Campholenic aldehyde is an intermediate for the manufacture of sandalwood-like fragrances such as santalol. Trans-carveol is an expensive constituent of the Valencia orange essence oil used in perfume bases and food flavor composition. Furthermore it has been found to exhibit chemoprevention of mammary carcinogenesis. A wide range of iron and ceria supported catalysts were prepared, characterized and tested for α-pinene oxide isomerization in order to selective synthesis of above mentioned products. The highest catalytic activity in the preparation of campholenic aldehyde over iron modified catalysts using toluene as a solvent at 70 °C (total conversion of α-pinene oxide with a selectivity of 66 % to the desired aldehyde) was achieved in the presence of Fe-MCM-41. Furthermore, Fe-MCM-41 catalyst was successfully regenerated without deterioration of catalytic activity and selectivity. The most active catalysts in the synthesis of trans-carveol from α-pinene oxide over iron and ceria modified catalysts in N,N-dimethylacetamide as a solvent at 140 °C (total conversion of α-pinene oxide with selectivity 43 % to trans-carveol) were Fe-Beta-300 and Ce-Si-MCM-41. These catalysts were further tested for an analogous reaction, namely verbenol oxide isomerization. Verbenone is another natural organic compound which can be found in a variety of plants or synthesized by allylic oxidation of α-pinene. An interesting product which is synthesized from verbenone is (1R,2R,6S)-3-methyl-6-(prop-1-en-2-yl)cyclohex-3-ene-1,2-diol. It has been discovered that this diol possesses potent anti-Parkinson activity. The most effective way leading to desired diol starts from verbenone and includes three stages: epoxidation of verbenone to verbenone oxide, reduction of verbenone oxide and subsequent isomerization of obtained verbenol oxide, which is analogous to isomerization of α-pinene oxide. In the research focused on the last step of these synthesis, high selectivity (82 %) to desired diol was achieved in the isomerization of verbenol oxide at a conversion level of 96 % in N,N-dimethylacetamide at 140 °C using iron modified zeolite, Fe-Beta-300. This reaction displayed surprisingly high selectivity, which has not been achieved yet. The possibility of the reuse of heterogeneous catalysts without activity loss was demonstrated.

Heterogeneous response of adipose tissue to cancer cachexia

Cancer cachexia causes disruption of lipid metabolism. Since it has been well established that the various adipose tissue depots demonstrate different responses to stimuli, we assessed the effect of cachexia on some biochemical and morphological parameters of adipocytes obtained from the mesenteric (MES), retroperitoneal (RPAT), and epididymal (EAT) adipose tissues of rats bearing Walker 256 carcinosarcoma, compared with controls. Relative weight and total fat content of tissues did not differ between tumor-bearing rats and controls, but fatty acid composition was modified by cachexia. Adipocyte dimensions were increased in MES and RPAT from tumor-bearing rats, but not in EAT, in relation to control. Ultrastructural alterations were observed in the adipocytes of tumor-bearing rat RPAT (membrane projections) and EAT (nuclear bodies).

p.F508del in a heterogeneous cystic fibrosis population from Minas Gerais, Brazil

Cystic fibrosis (CF) is the most common autosomal recessive disease of the Caucasian population. Among the various CF mutations, p.F508del is the most frequent, accounting for two-thirds of the global CF chromosomes, although showing great variability among populations. We have studied 115 unrelated CF patients from a mixed population of Minas Gerais (Brazil). To evaluate part of the DNA sequence of the cystic fibrosis transmembrane conductance regulator (CFTR) gene, blood DNA was obtained and PCR was performed using two pairs of primers that anneal to exons 10 and 24 of the CFTR gene. The PCR product was then submitted to automatic sequencing using the ABI PRISM 310 Genetic Analyzer. The p.F508del mutation was found in 50 (21.7%) of 230 unrelated CF alleles. Fifteen (13.0%) patients were homozygous for this mutation, while 20 (17.4%) were heterozygous; the remaining 80 (69.6%) patients did not carry the p.F508del mutation. Exon 24 sequence had no change in 75 (65.2%) patients, 21 (18.3%) had the sequence variation 4521G/A, 11 (9.6%) had a not yet described sequence variation 4407T/A and 8 (7.0%) patients had both sequence variations (4521G/A and 4407T/A). The polymorphism 4407T/A results in an amino acid modification from aspartic acid to glutamic acid, which will probably have no function effect in CFTR. This low p.F508del prevalence can be due to the variable ethnic origin of this population from Minas Gerais, which may have a high diversity of CF rare mutations.

Factors of innovation creation within functional heterogeneous project teams Case study: ABB Group

The research topic of the work is: “Factors of innovation creation within functionally heterogeneous project teams”. The research question is “What are the factors of innovation creation within functionally heterogeneous project teams?” The subject of this research is to explore the teams of projects, aimed at creating innovations, and understand how innovation is generated through project team work within them in term of factors. In line with the purposes of this study, firstly, it was analyzed what factors of such teams’ work are affecting creating innovation positively and negatively on the base of chosen literature and a preliminary conceptional framework was formulated, and secondly, the research of the work of project teams in one of the divisions of ABB company has been done and other factors and interdependencies between them have been added to the conceptional framework. This final conceptional framework constitutes the essense of the work findings and can be used as a tool to analyze the innovation creation process in functionally heterogeneous project teams

Modelling ecological values in heterogeneous and dynamic landscapes with geospatial data

Our surrounding landscape is in a constantly dynamic state, but recently the rate of changes and their effects on the environment have considerably increased. In terms of the impact on nature, this development has not been entirely positive, but has rather caused a decline in valuable species, habitats, and general biodiversity. Regardless of recognizing the problem and its high importance, plans and actions of how to stop the detrimental development are largely lacking. This partly originates from a lack of genuine will, but is also due to difficulties in detecting many valuable landscape components and their consequent neglect. To support knowledge extraction, various digital environmental data sources may be of substantial help, but only if all the relevant background factors are known and the data is processed in a suitable way. This dissertation concentrates on detecting ecologically valuable landscape components by using geospatial data sources, and applies this knowledge to support spatial planning and management activities. In other words, the focus is on observing regionally valuable species, habitats, and biotopes with GIS and remote sensing data, using suitable methods for their analysis. Primary emphasis is given to the hemiboreal vegetation zone and the drastic decline in its semi-natural grasslands, which were created by a long trajectory of traditional grazing and management activities. However, the applied perspective is largely methodological, and allows for the application of the obtained results in various contexts. Models based on statistical dependencies and correlations of multiple variables, which are able to extract desired properties from a large mass of initial data, are emphasized in the dissertation. In addition, the papers included combine several data sets from different sources and dates together, with the aim of detecting a wider range of environmental characteristics, as well as pointing out their temporal dynamics. The results of the dissertation emphasise the multidimensionality and dynamics of landscapes, which need to be understood in order to be able to recognise their ecologically valuable components. This not only requires knowledge about the emergence of these components and an understanding of the used data, but also the need to focus the observations on minute details that are able to indicate the existence of fragmented and partly overlapping landscape targets. In addition, this pinpoints the fact that most of the existing classifications are too generalised as such to provide all the required details, but they can be utilized at various steps along a longer processing chain. The dissertation also emphases the importance of landscape history as an important factor, which both creates and preserves ecological values, and which sets an essential standpoint for understanding the present landscape characteristics. The obtained results are significant both in terms of preserving semi-natural grasslands, as well as general methodological development, giving support to science-based framework in order to evaluate ecological values and guide spatial planning.

The Bootstrap of Mean for Dependent Heterogeneous Arrays.

Presently, conditions ensuring the validity of bootstrap methods for the sample mean of (possibly heterogeneous) near epoch dependent (NED) functions of mixing processes are unknown. Here we establish the validity of the bootstrap in this context, extending the applicability of bootstrap methods to a class of processes broadly relevant for applications in economics and finance. Our results apply to two block bootstrap methods: the moving blocks bootstrap of Künsch ( 989) and Liu and Singh ( 992), and the stationary bootstrap of Politis and Romano ( 994). In particular, the consistency of the bootstrap variance estimator for the sample mean is shown to be robust against heteroskedasticity and dependence of unknown form. The first order asymptotic validity of the bootstrap approximation to the actual distribution of the sample mean is also established in this heterogeneous NED context.

Suppression of long-branch attraction artefacts in the animal phylogeny using a site-heterogeneous model

Affiliation: Département de Biochimie, Université de Montréal

Études des premières étapes d’oligomérisation de la région Non-Aβ Component de l’a-synucléine et de Aβ1-40

Les protéines amyloïdes sont retrouvées sous forme de fibres dans de nombreuses maladies neurodégénératives. En tentant d’élucider le mécanisme de fibrillation, les chercheurs ont découvert que cette réaction se fait par un phénomène de nucléation passant par des oligomères. Il semblerait que ces espèces soient la principale cause de la toxicité observée dans les cellules des patients atteints d’amyloïdose. C’est pourquoi un intérêt particulier est donc porté aux premières étapes d’oligomérisation. Dans ce mémoire, nous nous intéressons à une séquence d’acide aminé fortement hydrophobe de l’α-synucléine appelée composante non β -amyloïde (Non-Amyloid β Component ou NAC). Cette dernière est retrouvée sous forme de fibres dans les corps et les neurites de Lewy des patients atteints de la maladie de Parkinson. De plus, elle constitue une composante minoritaire des fibres impliquées dans la maladie d’Alzheimer. Nous avons observé les changements structuraux qui ont lieu pour le monomère, le dimère et le trimère de la séquence NAC de l’α-synucléine. Nous nous sommes aussi intéressés aux conséquences structurelles observées dans des oligomères hétérogènes qui impliqueraient, Aβ1−40. Pour cela nous utilisons des dynamiques moléculaires, d’échange de répliques couplées au potentiel gros-grain, OPEP. Nous constatons une disparition des hélices α au profit des feuillets β , ainsi que le polymorphisme caractéristique des fibres amyloïdes. Certaines régions se sont démarquées par leurs capacités à former des feuillets β . La disparition de ces régions lorsque NAC est combinée à Aβ laisse entrevoir l’importance de l’emplacement des résidus hydrophobes dans des structures susceptibles de former des fibres amyloïdes.

Biogenesis of the C. elegans germline syncytium: from nucleation to maturation

La vie commence par la fusion des gamètes pour générer un zygote, dans lequel les constituants à la fois de l'ovocyte et des spermatozoïdes sont partagés au sein d'un syncytium. Le syncytium consiste en des cellules ou tissus dans lesquels des cellules nucléées individuelles distinctes partagent un cytoplasme commun. Alors que l’avantage du syncytium durant la fécondation est tout à fait évident, les syncytia se produisent également dans de nombreux contextes de développement différents dans les plantes, les champignons et dans le règne animal, des insectes aux humains, pour des raisons qui ne sont pas immédiatement évidentes. Par exemple, la lignée germinale de nombreuses espèces de vertébrés et d'invertébrés, des insectes aux humains, présente une structure syncytiale, suggérant que les syncytia constituent des phases conservées de développement de la lignée germinale. Malgré la prévalence commune des syncytia, ces derniers ont cependant confondu les scientifiques depuis des décennies avec des questions telles que la façon dont ils sont formés et maintenus en concurrence avec leurs homologues diploïdes, et quels sont les avantages et les inconvénients qu'ils apportent. Cette thèse va décrire l'utilisation de la lignée germinale syncytiale de C. elegans afin d'approfondir notre compréhension de l'architecture, la fonction et le mode de formation des tissus syncytiaux. Les cellules germinales (CGs) dans la lignée germinale de C. elegans sont interconnectées les unes aux autres par l'intermédiaire de structures appelées des anneaux de CG. En utilisant l'imagerie des cellules vivantes, nous avons d'abord analysé l'architecture syncytiale de la lignée germinale au long du développement et démontré que la maturation de l'anneau de CG se produit progressivement au cours de la croissance des larves et que les anneaux de CG sont composés de myosine II, de l'anilline canonique ANI-1, et de la courte isoforme d’anilline ANI-2, qui n'a pas les domaines de liaison à l’actine et à la myosine, depuis le premier stade larvaire, L1. Parmi les composants de l'anneau de CG, ANI-2 est exprimé au cours du développement et exclusivement enrichi entre les deux CGs primordiales (CGPs) au cours de l'embryogenèse de C. elegans, indiquant qu’ANI-2 est un composant bona fide des anneaux de CG. Nous avons en outre montré que les anneaux de CG sont largement absents dans les animaux mutants pour ani-2, montrant que leur maintien repose sur l'activité d'ANI-2. Contrairement à cela, nous avons trouvé que la déplétion d’ANI-1 a augmenté à la fois le diamètre des anneaux de CG et la largeur du rachis. Fait intéressant, la déplétion d’ANI-1 dans les mutants d’ani-2 a sauvé les défauts d'anneaux de CG des gonades déficientes en ani-2, ce qui suggère que l'architecture syncytiale de la lignée germinale de C. elegans repose sur un équilibre de l'activité de ces deux protéines Anilline. En outre, nous avons montré que lors de leur entrée à l'âge adulte, les mutants ani-2 présentent de sévères défauts de multinucléation des CGs qui découlent de l'effondrement des membranes de séparation des CGs individuelles. Cette multinucléation a coïncidé avec le début de la diffusion cytoplasmique, dont le blocage réduit la multinucléation des gonades mutantes pour ani-2, suggérant que les anneaux de CG résistent au stress mécanique associé au processus de diffusion cytoplasmique. En accord avec cela, nous avons trouvé aussi que la gonade peut soutenir la déformation élastique en réponse au stress mécanique et que cette propriété repose sur la malléabilité des anneaux de CGs. Dans une étude séparée afin de comprendre le mécanisme de formation du syncytium, nous avons suivi la dynamique de division de la cellule précurseur de la lignée germinale, P4 en deux CGP dans l’embryon de C. elegans. Nous avons démontré que les CGPs commencent la cytocinèse de manière similaire aux cellules somatiques, en formant un sillon de clivage, qui migre correctement et transforme ainsi l'anneau contractile en anneau de « midbody ring » (MBR), une structure qui relie de manière transitoire les cellules en division. Malgré cela, les CGPs, contrairement à leurs homologues somatiques, ne parviennent pas à accomplir la dernière étape de la cytocinèse, qui est la libération abscission-dépendante du MBR. Au lieu de cela, le MBR persiste à la frontière entre les CGPs en division et subit une réorganisation et une maturation pour se transformer finalement en structures en forme d'anneau qui relient les cellules en division. Nous montrons en outre que les composants du MB/MBR; UNC-59Septin, CYK-7, ZEN-4Mklp1, RHO-1RhoA sont localisés à des anneaux de CG au long du développement de la lignée germinale du stade L1 à l'âge adulte, ce qui suggère que les anneaux de CG sont dérivés des MBR. Bien qu'il reste encore beaucoup à faire pour comprendre pleinement le mécanisme précis de la formation du syncytium, le maintien, ainsi que la fonction du syncytium, nos résultats appuient un modèle dans lequel la stabilisation du MBR et la cytocinèse incomplète pourraient être une option conservée dans l’évolution pour la formation du syncytium. En outre, notre travail démontre que les régulateurs de la contractilité peuvent jouer un rôle dans la maturation et l’élasticité de l'anneau de CG au cours du développement de la lignée germinale, fournissant un ajout précieux pour une plus ample compréhension de la syncytiogenèse et de sa fonction.

Factors Underlying Heterogeneous Individual Growth in Macrobrachium rosenbergii and the Effect of Size Heterogeneity on Economic Feasibility of Farming in Kuttanad ( Kerala )

School of Industrial Fisheries, Cochin University of Science and Technology

Organic Synthesis Mediated by Heterogeneous Catalysts

Catalysis is a technologically important field which determines the quality of life in future. Catalyst research in pharmaceutical industry,fine chemical synthesis and emission control demands supported catalysts in bulk quantities.In the present work it was observed that clay supported catalysts mentioned in various chapters could also be used for the synthesis of similar molecules. The K10Ti catalyst can be used for the synthesis similar substituted imidazole derivatives under solvent free conditions and synthetically important Mannich bases of substrates containing various substitutes.Al-pillared saponite can be used for acetalation of other polyhydroxy compounds like glycerol,mannitol etc.Cu-Pd KSF catalyst has found application in C-C bond forming reactions which can be applied to other reactions and similar methods can be adopted for the synthesis of other catalyst by changing the transition metals. Montmorillonite K10 catalysed synthesis of triarylpyridines can be extended to the synthesis tetrasubstuted pyroles.K10Ti can also be utilized for the synthesis of similar heterocycles.

Nucleation in supersaturated solutions 3He in 4He at negative pressure.

Depending on the 3He concentration, thermal nucleation in 3-4He supersaturated liquid mixtures at negative pressures may be originated either by bubble or by 3rich drop formation. We have investigated this phenomenon within a density-functional approach, determining the regions in the pressure¿3He-concentration plane where bubbles or drops likely drive the nucleation process. As an illustrative example, we also give the homogeneous nucleation pressure corresponding to 50 and 100 mK temperature.

Lead free heterogeneous multilayers with giant magneto electric coupling for microelectronics/microelectromechanical systems applications

Lead free magneto electrics with a strong sub resonant (broad frequency range) magneto electric coupling coefficient (MECC) is the goal of the day which can revolutionise the microelectronics and microelectromechanical systems (MEMS) industry. We report giant resonant MECC in lead free nanograined Barium Titanate–CoFe (Alloy)-Barium Titanate [BTO-CoFe-BTO] sandwiched thin films. The resonant MECC values obtained here are the highest values recorded in thin films/ multilayers. Sub-resonant MECC values are quite comparable to the highest MECC reported in 2-2 layered structures. MECC got enhanced by two orders at a low frequency resonance. The results show the potential of these thin films for transducer, magnetic field assisted energy harvesters, switching devices, and storage applications. Some possible device integration techniques are also discussed

Information Exchange and Fusion in Dynamic and Heterogeneous Distributed Environments

Context awareness, dynamic reconfiguration at runtime and heterogeneity are key characteristics of future distributed systems, particularly in ubiquitous and mobile computing scenarios. The main contributions of this dissertation are theoretical as well as architectural concepts facilitating information exchange and fusion in heterogeneous and dynamic distributed environments. Our main focus is on bridging the heterogeneity issues and, at the same time, considering uncertain, imprecise and unreliable sensor information in information fusion and reasoning approaches. A domain ontology is used to establish a common vocabulary for the exchanged information. We thereby explicitly support different representations for the same kind of information and provide Inter-Representation Operations that convert between them. Special account is taken of the conversion of associated meta-data that express uncertainty and impreciseness. The Unscented Transformation, for example, is applied to propagate Gaussian normal distributions across highly non-linear Inter-Representation Operations. Uncertain sensor information is fused using the Dempster-Shafer Theory of Evidence as it allows explicit modelling of partial and complete ignorance. We also show how to incorporate the Dempster-Shafer Theory of Evidence into probabilistic reasoning schemes such as Hidden Markov Models in order to be able to consider the uncertainty of sensor information when deriving high-level information from low-level data. For all these concepts we provide architectural support as a guideline for developers of innovative information exchange and fusion infrastructures that are particularly targeted at heterogeneous dynamic environments. Two case studies serve as proof of concept. The first case study focuses on heterogeneous autonomous robots that have to spontaneously form a cooperative team in order to achieve a common goal. The second case study is concerned with an approach for user activity recognition which serves as baseline for a context-aware adaptive application. Both case studies demonstrate the viability and strengths of the proposed solution and emphasize that the Dempster-Shafer Theory of Evidence should be preferred to pure probability theory in applications involving non-linear Inter-Representation Operations.

Atomistic-continuum modeling of ultrafast laser-induced melting of silicon targets

In this work, we present an atomistic-continuum model for simulations of ultrafast laser-induced melting processes in semiconductors on the example of silicon. The kinetics of transient non-equilibrium phase transition mechanisms is addressed with MD method on the atomic level, whereas the laser light absorption, strong generated electron-phonon nonequilibrium, fast heat conduction, and photo-excited free carrier diffusion are accounted for with a continuum TTM-like model (called nTTM). First, we independently consider the applications of nTTM and MD for the description of silicon, and then construct the combined MD-nTTM model. Its development and thorough testing is followed by a comprehensive computational study of fast nonequilibrium processes induced in silicon by an ultrashort laser irradiation. The new model allowed to investigate the effect of laser-induced pressure and temperature of the lattice on the melting kinetics. Two competing melting mechanisms, heterogeneous and homogeneous, were identified in our big-scale simulations. Apart from the classical heterogeneous melting mechanism, the nucleation of the liquid phase homogeneously inside the material significantly contributes to the melting process. The simulations showed, that due to the open diamond structure of the crystal, the laser-generated internal compressive stresses reduce the crystal stability against the homogeneous melting. Consequently, the latter can take a massive character within several picoseconds upon the laser heating. Due to the large negative volume of melting of silicon, the material contracts upon the phase transition, relaxes the compressive stresses, and the subsequent melting proceeds heterogeneously until the excess of thermal energy is consumed. A series of simulations for a range of absorbed fluences allowed us to find the threshold fluence value at which homogeneous liquid nucleation starts contributing to the classical heterogeneous propagation of the solid-liquid interface. A series of simulations for a range of the material thicknesses showed that the sample width we chosen in our simulations (800 nm) corresponds to a thick sample. Additionally, in order to support the main conclusions, the results were verified for a different interatomic potential. Possible improvements of the model to account for nonthermal effects are discussed and certain restrictions on the suitable interatomic potentials are found. As a first step towards the inclusion of these effects into MD-nTTM, we performed nanometer-scale MD simulations with a new interatomic potential, designed to reproduce ab initio calculations at the laser-induced electronic temperature of 18946 K. The simulations demonstrated that, similarly to thermal melting, nonthermal phase transition occurs through nucleation. A series of simulations showed that higher (lower) initial pressure reinforces (hinders) the creation and the growth of nonthermal liquid nuclei. For the example of Si, the laser melting kinetics of semiconductors was found to be noticeably different from that of metals with a face-centered cubic crystal structure. The results of this study, therefore, have important implications for interpretation of experimental data on the kinetics of melting process of semiconductors.