Decision making and planning of children in the reproductive process of males

Reproduction is not restricted to the biological; it is also a complex and dynamic social process. The objective of this paper is to analyze the decision and planning of children as part of the reproductive process in men. Methodologically, a qualitative research was made. The analysis includes in-depth interviews with 30 parents between 20 and 45 years, of medium socio-economic level in México. The results show that the reproductive process incorporates family formation negotiated with their couple the marriage until they had economic potential. In some cases, their decision hastened because the couple was pregnant. The planning was not contemplated but when getting the news, they accept it and get involved in the process, while others see it as a conflict.

Towards an improved understanding of the nitrate dynamics in lowland, permeable river-systems: Applications of INCA-N

The Integrated Catchment Model of Nitrogen (INCA-N) was applied to the Lambourn and Pang river-systems to integrate current process-knowledge and available-data to test two hypotheses and thereby determine the key factors and processes controlling the movement of nitrate at the catchment-scale in lowland, permeable river-systems: (i) that the in-stream nitrate concentrations were controlled by two end-members only: groundwater and soil-water, and (ii) that the groundwater was the key store of nitrate in these river-systems. Neither hypothesis was proved true or false. Due to equifinality in the model structure and parameters at least two alternative models provided viable explanations for the observed in-stream nitrate concentrations. One model demonstrated that the seasonal-pattern in the stream-water nitrate concentrations was controlled mainly by the mixing of ground- and soil-water inputs. An alternative model demonstrated that in-stream processes were important. It is hoped further measurements of nitrate concentrations made in the catchment soil- and ground-water and in-stream may constrain the model and help determine the correct structure, though other recent studies suggest that these data may serve only to highlight the heterogeneity of the system. Thus when making model-based assessments and forecasts it is recommend that all possible models are used, and the range of forecasts compared. In this study both models suggest that cereal production contributed approximately 50% the simulated in-stream nitrate toad in the two catchments, and the point-source contribution to the in-stream load was minimal. (c) 2006 Elsevier B.V. All rights reserved.

Risk and price in the bidding process of contractors

Formal and analytical risk models prescribe how risk should be incorporated in construction bids. However, the actual process of how contractors and their clients negotiate and agree on price is complex, and not clearly articulated in the literature. Using participant observation, the entire tender process was shadowed in two leading UK construction firms. This was compared to propositions in analytical models and significant differences were found. 670 hours of work observed in both firms revealed three stages of the bidding process. Bidding activities were categorized and their extent estimated as deskwork (32%), calculations (19%), meetings (14%), documents (13%), off-days (11%), conversations (7%), correspondence (3%) and travel (1%). Risk allowances of 1-2% were priced in some bids and three tiers of risk apportionment in bids were identified. However, priced risks may sometimes be excluded from the final bidding price to enhance competitiveness. Thus, although risk apportionment affects a contractor’s pricing strategy, other complex, microeconomic factors also affect price. Instead of pricing in contingencies, risk was priced mostly through contractual rather than price mechanisms, to reflect commercial imperatives. The findings explain why some assumptions underpinning analytical models may not be sustainable in practice and why what actually happens in practice is important for those who seek to model the pricing of construction bids.

Subcontract and supply enquiries in the tender process of contractors

In the tender process, contractors often rely on subcontract and supply enquiries to calculate their bid prices. However, this integral part of the bidding process is not empirically articulated in the literature. Over 30 published materials on the tendering process of contractors that talk about enquiries were reviewed and found to be based mainly on experiential knowledge rather than systematic evidence. The empirical research here helps to describe the process of enquiries precisely, improve it in practice, and have some basis to support it in theory. Using a live participant observation case study approach, the whole tender process was shadowed in the offices of two of the top 20 UK civil engineering construction firms. This helped to investigate 15 research questions on how contractors enquire and obtain prices from subcontractors and suppliers. Forty-three subcontract enquiries and 18 supply enquiries were made across two different projects with average value of 7m. An average of 15 subcontract packages and seven supply packages was involved. Thus, two or three subcontractors or suppliers were invited to bid in each package. All enquiries were formulated by the estimator, with occasional involvement of three other personnel. Most subcontract prices were received in an average of 14 working days; and supply prices took five days. The findings show 10 main activities involved in processing enquiries and their durations, as well as wasteful practices associated with enquiries. Contractors should limit their enquiry invitations to a maximum of three per package, and optimize the waiting time for quotations in order to improve cost efficiency.

The evolutionary ecology of resistance to parasitoids by Drosophila

Parasitoids are the most important natural enemies of many insect species. Larvae of many Drosophila species can defend themselves against attack by parasitoids through a cellular immune response called encapsulation. The paper reviews recent studies of the evolutionary biology and ecological genetics of resistance in Drosophila, concentrating on D. melanogaster. The physiological basis of encapsulation, and the genes known to interfere with resistance are briefly summarized. Evidence for within- and between-population genetic variation in resistance from isofemale line, artificial selection and classical genetic studies are reviewed. There is now firm evidence that resistance is costly to Drosophila, and the nature of this cost is discussed, and the possibility that it may involve a reduction in metabolic rate considered. Comparative data on encapsulation and metabolic rates across seven Drosophila species provides support for this hypothesis. Finally, the possible population and community ecological consequences of evolution in the levels of host resistance are examined.

Risk accountability in the tender process of contractors in Ghana and UK

The process of how contractors take account of risk when calculating their bids for construction work is investigated based on preliminary investigations and case studies in Ghana and UK. Ghana and UK were chosen, more or less arbitrarily, for the purpose of case studies, and to test the idea that there are systematic differences between the approaches in different places. Clear differences were found in the risk pricing approaches of contractors in the two countries. The difference appeared to emanate from the professional knowledge and competence of the bid team members, company policy, corporate accountability and the business environments in which the contractors operate. Both groups of contractors take account of risk in estimates. However, risk accountability was found to be higher on the agenda in the tender process of UK contractors, documented more systematically, and assessed and managed more rigorously with input from the whole bid team. Risk accountability takes place at three levels of the tender process and is dictated strongly by market forces and company circumstances.

A metaphorical analysis of client organisations and the briefing process

This paper reviews and critiques the current practice of classifying building clients according to their 'type'. An alternative approach to understanding organisations is developed in accordance with the principles of naturalistic inquiry. It is contended that the complex pluralistic clients of the 1990s can only really be understood 'from the inside'. The concept of organisational metaphors is introduced as the basis for a more sophisticated way of thinking about organisations. The various strands of organisational theory are also analyzed in terms of their underlying metaphors. Different theories are seen to bring different insights. The implicit metaphors adopted by practitioners are held to be important in that they tend to dictate the adopted approach to client briefing. This contention is illustrated by analyzing three different characterisations of the briefing process in terms of their underlying metaphors. Finally, the discussion is placed in a contemporary UK context by comparing the dominant paradigm of practice during the 1980s to that of the 1990s.

Stochastic lattice gas model describing the dynamics of the SIRS epidemic process

We study a stochastic process describing the onset of spreading dynamics of an epidemic in a population composed of individuals of three classes: susceptible (S), infected (I), and recovered (R). The stochastic process is defined by local rules and involves the following cyclic process: S -> I -> R -> S (SIRS). The open process S -> I -> R (SIR) is studied as a particular case of the SIRS process. The epidemic process is analyzed at different levels of description: by a stochastic lattice gas model and by a birth and death process. By means of Monte Carlo simulations and dynamical mean-field approximations we show that the SIRS stochastic lattice gas model exhibit a line of critical points separating the two phases: an absorbing phase where the lattice is completely full of S individuals and an active phase where S, I and R individuals coexist, which may or may not present population cycles. The critical line, that corresponds to the onset of epidemic spreading, is shown to belong in the directed percolation universality class. By considering the birth and death process we analyze the role of noise in stabilizing the oscillations. (C) 2009 Elsevier B.V. All rights reserved.

The opportunity of an internationalization process to Brazil: the case of Etai, a french SME

Este trabalho teve como objetivo principal fornecer subsídios para uma pequena empresa francesa analisar a viabilidade do seu processo de internacionalização no Brasil, um caminho difícil e cheio de obstáculos. De fato, muitas empresas francesas estão tentando entrar no mercado brasileiro, visto como um país que oferece várias oportunidades para o crescimento e rentabilidade destas empresas. No entanto, por causa da falta de recursos e das dificuldades a serem enfrentadas durante o processo de internacionalização, pequenas empresas devem analisar cuidadosamente a viabilidade de um projeto internacional, antes de entrar no mercado estrangeiro. Assim, trabalhos acadêmicos foram usados como referência para identificar e apresentar os aspectos administrativos, econômicos e culturais que poderiam facilitar ou dificultar o processo de internacionalização. Os principais aspectos administrativos apresentados foram a seleção do mercado internacional, o modo de internacionalização e os desafios do processo de internacionalização. Para os aspectos econômicos, apresentamos as principais tecnologias usadas para financiar pequenas e médias empresas, e o impacto das infra-estruturas nessas tecnologias. Também, para que uma PME possa entender o processo de financiamento, apresentamos o ponto de vista dos Bancos. Aspectos culturais que poderiam facilitar ou dificultar o processo de internacionalização são apontados através de conceitos acadêmicos como "distância cultural" ou "distância psíquica". Este trabalho discute também como as diferenças entre as culturas são susceptíveis em gerar dificuldades ou vantagens, e que a distância cultural também pode ter um impacto no modo de entrada escolhido pela empresa no país de acolhimento.

Analysis of systemic inflammatory response in the carcinogenic process of uterine cervical neoplasia

The inflammatory response is an active process in cervical cancer and may act in the progression and/or regression of the lesion. At the site of inflammation, macrophages and neutrophils are present as well as cytokines such as TNF-alpha and IFN-gamma. This study aims to evaluate the inflammatory response levels in women with cervical intraepithelial lesions (CIN) and with squamous cell carcinoma (SCC) of the cervix. Serum samples obtained from women without evidence of disease (n = 30), with CIN (n = 30) and with SCC of the cervix (n = 30) were analyzed for the activities of N-acetylglucosaminidase (NAG) and myeloperoxidase (MPO) by enzymatic assay and the serum levels of TNF-alpha and IFN-gamma by ELISA assay. The activities of NAG and MPO and the level of TNF-alpha were higher in women with CIN compared to the women with SCC. The levels of IFN-gamma were lower in the group of women with CIN compared to the group with SCC. There was not a significant association between the degree of the CIN and the staging of the SCC of the cervix and the degree of inflammation as assessed by the levels of inflammatory markers. The inflammatory response was inversely correlated with the progression of the carcinogenic process. In the three groups, the control group, women with CIN and women with invasive SCC, there was no association between the degree of preinvasive lesions and staging of the SCC of the cervix. (C) 2011 Elsevier Masson SAS. All rights reserved.

Floristic composition of the tree stratum of a semideciduous mesophytic forest in the municipality of Botucatu, São Paulo state

The floristic composition was studied in an area of semideciduous mesophytic forest, with 120 ha, in the municipality of Botucatu, SP, Brazil. This forest lies on the ascent of the Cuesta of Botucatu. Due to the heterogeneity of the relief, for the sampling process, the forest was divided in three regions: the upper one (comprising the strip of forest on the plateau), middle on (the forestal area lied on the ascent properly said) and the lower one (the strip of forest on the plain). The tree sampling regions showed some differences among them and this must be connected to the differences in the soil.

Environmental implications of soil remediation using the Fenton process

This work evaluates some collateral effects caused by the application of the Fenton process to 1,1-bis(4-chlorophenyl)-2,2,2-trichloroethane (DDT) and diesel degradation in soil. While about 80% of the diesel and 75% of the DDT present in the soil were degraded in a slurry system, the dissolved organic carbon (DOC) in the slurry filtrate increased from 80 to 880 mg l(-1) after 64 h of reaction and the DDT concentration increased from 12 to 50 mu g l(-1). Experiments of diesel degradation conducted on silica evidenced that soluble compounds were also formed during diesel oxidation. Furthermore, significant increase in metal concentrations was also observed in the slurry filtrate after the Fenton treatment when compared to the control experiment leading to excessive concentrations of Cr, Ni, Cu and Mn according to the limits imposed for water. Moreover, 80% of the organic matter naturally present in the soil was degraded and a drastic volatilization of DDT and 2,2-bis(4-chlorophenyl)-1,1-dichloroethylene was observed. Despite the high percentages of diesel and DDT degradation in soil, the potential overall benefits of its application must be evaluated beforehand taking into account the metal and target compounds dissolution and the volatilization of contaminants when the process is applied. (c) 2007 Elsevier Ltd. All rights reserved.

Densitometric analysis of the autogenous demineralized dentin matrix on the dental socket wound healing process in humans

The aim of this study was to evaluate the effects of the autogenous demineralized dentin matrix (ADDM) on the third molar socket wound healing process in humans, using the guided bone regeneration technique and a polytetrafluoroethylene barrier (PTFE). Twenty-seven dental sockets were divided into three groups: dental socket (Control), dental socket with PTFE barrier (PTFE), and dental socket with ADDM slices associated to PTFE banier (ADDM + PTFE). The dental sockets were submitted to radiographic bone densitometry analysis and statistical analysis on the 15th, 30th, 60th and 90th days using analysis of variance (ANOVA) and Tukey's test (p ≤ 0.05). The radiographic analysis of the ADDM + PTFE group showed greater homogeneity of bone radiopacity than the Control group and the PTFE group, during all the observation times. The dentin matrix gradually disappeared from the dental socket during the course of the repair process, suggesting its resorption during the bone remodeling process. It was concluded that the radiographic bone density of the dental sockets treated with ADDM was similar to that of the surrounding normal bone on the 90th day. The ADDM was biocompatible with the bone tissue of the surgical wounds of human dental sockets. The radiographic analysis revealed that the repair process was discreetly faster in the ADDM + PTFE group than in the Control and PTFE groups, although the difference was not statistically significant. In addition, the radiographic image of the ADDM + PTFE group suggested that its bone architecture was better than that of the Control and PFTE groups.

Setting the preheating process of electronic ballasts for hot-cathode fluorescent lamps, considering the Rh/Rc ratio

This paper presents a new model for the representation of the electrodes filaments of fluorescent lamps, during their preheating, and an analysis capable to guide the design of the preheating process in electronic ballasts. The main improvement obtained with the lamp model is the accurate theoretical reproduction of the behavior of the Rh/Rc ratio during the preheating process. In addition, using the proposed methodology based on the lamp model, it is possible to set a proper preheating process to the electrodes filaments, without the necessity of exhaustive empirical adjustments in the prototype, reducing time and costs involved in the design of ballasts with preheating capabilities. © 2006 IEEE.

Severe fracture of the maxillary alveolar process associated with extrusive luxation and tooth avulsion: A case report

Aim: The aim of this report is to present a case of severe fracture of the maxillary anterior alveolar process with substantial bone dislodgement associated with extrusive tooth luxation and avulsion. Background: Dentoalveolar trauma is a challenge to dentistry, especially in young patients, for it can lead to early tooth loss which compromises oral function, esthetics, self-esteem, and alter the long-term plan of care for the victim. Case Report: A 12-year-old girl with severe dentoalveolar trauma to the maxillary anterior region presented for emergency care for her injury. Treatment consisted of fracture reduction of the alveolar process, repositioning of the teeth that had suffered extrusive luxation, placement of a semi-rigid splint, and suturing of soft tissue lacerations. The traumatized teeth presented with pulpal necrosis and were treated endodontically. After 24 months of follow up, the fracture of the alveolar process was completely healed and the displaced teeth presented no signs of ankylosis or root resorption. Summary: First-aid care contributed remarkably to this case allowing the re-establishment of esthetics, function, and patient's self-esteem. In spite of trauma extension the treatment outcomes were favorable. Clinical Significance: Cases of dentoalveolar trauma should be evaluated on an individual basis. However, early emergency management and adequate follow-up can prevent further complications and contribute to treatment success.