Estudo paramétrico da segregação gravitacional na injeção contínua de vapor

Steam injection is the most used method of additional recovery for the extraction of heavy oil. In this type procedure is common to happen gravitational segregation and this phenomenon can affect the production of oil and therefore, it shoulds be considered in the projects of continuous steam injection. For many years, the gravitational segregation was not adequately considered in the calculation procedures in Reservoir Engineering. The effect of the gravity causes the segregation of fluids inside the porous media according to their densities. The results of simulation arising from reservoirs could provide the ability to deal with the gravity, and it became apparent that the effects of the gravity could significantly affect the performance of the reservoir. It know that the gravitational segregation can happen in almost every case where there is injection of light fluid, specially the steam, and occurs with greater intensity for viscous oil reservoirs. This work discusses the influence of some parameters of the rock-reservoir in segregation as viscosity, permeability, thickness, cover gas, porosity. From a model that shows the phenomenon with greater intensity, optimized some operational parameters as the rate flow rate steam, distance between the wells injector-producer, and interval of completion which contributed to the reduction in gravity override, thus increasing the oil recovery. It was shown a greater technical-economic viability for the model of distance between the wells 100 m. The analysis was performed using the simulator of CMG (Computer Modeling Group-Stars 2007.11, in which was observed by iterating between studied variables in heavy oil reservoirs with similar characteristics to Brazilian Northeast

Degradacao termica e catalitica da borra oleosa de Petroleo com materiais nanoestruturados al-mcm-41 e AL-SBA-15

Aiming to reduce and reuse waste oil from oily sludge generated in large volumes by the oil industry, types of nanostructured materials Al-MCM-41 and Al-SBA-15, with ratios of Si / Al = 50, were synthesized , and calcined solids used as catalysts in the degradation of oily sludge thermocatalytic oil from oilfield Canto do Amaro, in the state of Rio Grande do Norte. Samples of nanostructured materials were characterized by thermogravimetric analysis (TG / DTG), X-ray diffraction (XRD), scanning electron microscopy (SEM), absorption spectroscopy in the infrared Fourier transform (FT-IR) and adsorption nitrogen (BET). The characterization showed that the synthesized materials resulted in a catalyst nanostructure, and ordered pore diameter and surface area according to existing literature. The oily sludge sample was characterized by determining the API gravity and sulfur content and SARA analysis (saturates, aromatics, resins and asphaltenes). The results showed a material equivalent to the average oil with API gravity of 26.1, a low sulfur content and considerable amount of resins and asphaltenes, presented above in the literature. The thermal and catalytic degradation of the oily sludge oil was performed from room temperature to 870 ° C in the ratios of heating of 5, 10 and 20 ° C min-1. The curves generated by TG / DTG showed a more accelerated degradation of oily sludge when it introduced the nanostructured materials. These results were confirmed by activation energy calculated by the method of Flynn-Wall, in the presence of catalysts reduced energy, in particular in the range of cracking, showing the process efficiency, mainly for extraction of lightweight materials of composition of oily sludge, such as diesel and gasoline

Recherche et analyse d'étoiles naines blanches chimiquement stratiées dans le Sloan Digital Sky Survey

Ce mémoire présente une recherche détaillée et une analyse des étoiles naines blanches hybrides chimiquement stratifiées dans le Sloan Digital Sky Survey (SDSS). Une seule étoile stratifiée, PG 1305-017, était connue avant notre recherche. L'objectif principal est de confirmer l'existence de plusieurs nouvelles étoiles stratifiées. Pour ce faire, il a fallu dans un premier temps développer une nouvelle génération de modèles d'atmosphère à partir de ceux de Bergeron et al. (1991) et Tremblay & Bergeron (2009). Nous y avons ajouté l'opacité de toutes les raies d'hélium et les calculs nécessaires pour tenir compte de la stratification chimique de l'atmosphère, où une mince quantité d’hydrogène flotte en équilibre diffusif au-dessus d’une enveloppe massive d’hélium. En parallèle, nous avons aussi calculé des modèles standards, chimiquement homogènes. Ensuite, nous avons sélectionné des naines blanches chaudes (Teff > 30,000 K) de type spectral hybride (traces d'hélium et d'hydrogène) parmi les ~38,000 naines blanches répertoriées dans le SDSS. Un total de 52 spectres d'étoile a été retenu dans notre échantillon final. La technique spectroscopique, c'est-à-dire l'ajustement des raies spectrales des modèles sur un spectre observé, a été appliquée à toutes les étoiles de notre échantillon. Nous avons ainsi mesuré la température effective, la gravité de surface et la composition chimique de l'atmosphère de ces étoiles. Par l'ajustement simultané de modèles stratifiés et homogènes, nous avons aussi pu déterminer si les étoiles étaient stratifiées ou non. Nous identifions ainsi 14 naines blanches stratifiées. Nous tirons de ces résultats plusieurs conclusions sur les processus physiques expliquant la présence d'hélium dans l'atmosphère.

Recherche et analyse d'étoiles naines blanches chimiquement stratiées dans le Sloan Digital Sky Survey

Ce mémoire présente une recherche détaillée et une analyse des étoiles naines blanches hybrides chimiquement stratifiées dans le Sloan Digital Sky Survey (SDSS). Une seule étoile stratifiée, PG 1305-017, était connue avant notre recherche. L'objectif principal est de confirmer l'existence de plusieurs nouvelles étoiles stratifiées. Pour ce faire, il a fallu dans un premier temps développer une nouvelle génération de modèles d'atmosphère à partir de ceux de Bergeron et al. (1991) et Tremblay & Bergeron (2009). Nous y avons ajouté l'opacité de toutes les raies d'hélium et les calculs nécessaires pour tenir compte de la stratification chimique de l'atmosphère, où une mince quantité d’hydrogène flotte en équilibre diffusif au-dessus d’une enveloppe massive d’hélium. En parallèle, nous avons aussi calculé des modèles standards, chimiquement homogènes. Ensuite, nous avons sélectionné des naines blanches chaudes (Teff > 30,000 K) de type spectral hybride (traces d'hélium et d'hydrogène) parmi les ~38,000 naines blanches répertoriées dans le SDSS. Un total de 52 spectres d'étoile a été retenu dans notre échantillon final. La technique spectroscopique, c'est-à-dire l'ajustement des raies spectrales des modèles sur un spectre observé, a été appliquée à toutes les étoiles de notre échantillon. Nous avons ainsi mesuré la température effective, la gravité de surface et la composition chimique de l'atmosphère de ces étoiles. Par l'ajustement simultané de modèles stratifiés et homogènes, nous avons aussi pu déterminer si les étoiles étaient stratifiées ou non. Nous identifions ainsi 14 naines blanches stratifiées. Nous tirons de ces résultats plusieurs conclusions sur les processus physiques expliquant la présence d'hélium dans l'atmosphère.

Towards a full cosmological exploitation of cosmic voids

A stately fraction of the Universe volume is dominated by almost empty space. Alongside the luminous filamentary structures that make it up, there are vast and smooth regions that have remained outside the Cosmology spotlight during the past decades: cosmic voids. Although essentially devoid of matter, voids enclose fundamental information about the cosmological framework and have gradually become an effective and competitive cosmological probe. In this Thesis work we present fundamental results about the cosmological exploitation of voids. We focused on the number density of voids as a function of their radius, known as void size function, developing an effective pipeline for its cosmological usage. We proposed a new parametrisation of the most used theoretical void size function to model voids identified in the distribution of biased tracers (i.e. dark matter haloes, galaxies and galaxy clusters), a step of fundamental importance to extend the analysis to real data surveys. We then applied our built methodology to study voids in alternative cosmological scenarios. Firstly we exploited voids with the aim of breaking the degeneracies between cosmological scenarios characterised by modified gravity and the inclusion of massive neutrinos. Secondly we analysed voids in the perspective of the Euclid survey, focusing on the void abundance constraining power on dynamical dark energy models with massive neutrinos. Moreover we explored other void statistics like void profiles and clustering (i.e. the void-galaxy and the void-void correlation), providing cosmological forecasts for the Euclid mission. We finally focused on the probe combination, highlighting the incredible potential of the joint analysis of multiple void statistics and of the combination of the void size function with different cosmological probes. Our results show the fundamental role of the void analysis in constraining the fundamental parameters of the cosmological model and pave the way for future studies on this topic.

Back-in-time void finder: dynamical detection of cosmic voids for precision cosmology

Cosmic voids are vast and underdense regions emerging between the elements of the cosmic web and dominating the large-scale structure of the Universe. Void number counts and density profiles have been demonstrated to provide powerful cosmological probes. Indeed, thanks to their low-density nature and they very large sizes, voids represent natural laboratories to test alternative dark energy scenarios, modifications of gravity and the presence of massive neutrinos. Despite the increasing use of cosmic voids in Cosmology, a commonly accepted definition for these objects has not yet been reached. For this reason, different void finding algorithms have been proposed during the years. Voids finder algorithms based on density or geometrical criteria are affected by intrinsic uncertainties. In recent years, new solutions have been explored to face these issues. The most interesting is based on the idea of identify void positions through the dynamics of the mass tracers, without performing any direct reconstruction of the density field. The goal of this Thesis is to provide a performing void finder algorithm based on dynamical criteria. The Back-in-time void finder (BitVF) we present use tracers as test particles and their orbits are reconstructed from their actual clustered configuration to an homogeneous and isotropic distribution, expected for the Universe early epoch. Once the displacement field is reconstructed, the density field is computed as its divergence. Consequently, void centres are identified as local minima of the field. In this Thesis work we applied the developed void finding algorithm to simulations. From the resulting void samples we computed different void statistics, comparing the results to those obtained with VIDE, the most popular void finder. BitVF proved to be able to produce a more reliable void samples than the VIDE ones. The BitVF algorithm will be a fundamental tool for precision cosmology, especially with upcoming galaxy-survey.

Analytic models of self-gravitating rotating gaseous tori with central black hole

In this thesis project, I present stationary models of rotating fluids with toroidal distributions that can be used to represent the active galactic nuclei (AGN) central obscurers, i.e. molecular tori (Combes et al., 2019), as well as geometrically thick accretion discs, like ADAF discs (Narayan and Yi, 1995) or Polish doughnuts (Abramowicz, 2005). In particular, I study stationary rotating systems with a more general baroclinic distribution (with a vertical gradient of the angular velocity), which are often more realistic and less studied, due to their complexity, than the barotropic ones (with cylindrical rotation), which are easier to construct. In the thesis, I compute analytically the main intrinsic and projected properties of the power-law tori based on the potential-density pairs of Ciotti and Bertin (2005). I study the density distribution and the resulting gravitational potential for different values of α, in the range 2 < α < 5. For the same models, I compute the surface density of the systems when seen face-on and edge-on. I then apply the stationary Euler equations to obtain rotational velocity and temperature distributions of the self-gravitating models in the absence of an external gravitational potential. In the thesis I also consider the power-law tori with the presence of a central black hole in addition to the gas self-gravity, and solving analytically the stationary Euler equations, I compute how the properties of the system are modified by the black hole and how they vary as a function of the black hole mass. Finally, applying the Solberg-Høiland criterion, I show that these baroclinic stationary models are linearly stable in the absence of the black hole. In the presence of the black hole I derive the analytical condition for stability, which depends on α and on the black hole mass. I also study the stability of the tori in the hypothesis that they are weakly magnetized, finding that they are always unstable to this instability.

Embedding Starobinsky inflation in string compactifications

A period of accelerated expansion of the primordial universe, known as inflation, represents the standard paradigm for the early universe cosmology. While inflation agrees with observational constraints, a complete understanding of its physical origin is not available yet. This suggests the necessity of an embedding into a more fundamental theory. String theory is arguably the best-developed candidate for an ultra-violet (UV) complete theory of gravity and string compactifications could provide a natural framework for addressing this issue. The aim of this thesis work is to investigate the potential embedding of Starobinsky inflation in effective field theories arising in string compactifications. In particular, we focus on two main objectives. The first one is the evaluation of Yukawa-like couplings in f (R)-theories of gravity with fermions, more specifically in the context of Starobinsky inflation. The second goal is understanding if any of the moduli which naturally arise in string compactifications has the right form of this coupling and displays the correct scalar potential, as needed for a possible identification with the scalar field driving Starobinsky inflation.

High gravity batch and continuous processes for beer production: Evaluation of fermentation performance and beer quality

This study deals with two innovative brewing processes, high gravity batch and complete continuous beer fermentation systems. The results show a significant influence of the variables such as concentration and temperature on the yield factor of the substrate into ethanol and consequently on the productivity of the high gravity batch process. The technological feasibility of continuous production of beer based on yeast immobilization on cheap alternative carriers was also demonstrated. The influence of process parameters on fermentation performance and quality of the obtained beers was studied by sensorial analysis. No significant difference in the degree of acceptance between the obtained products and some traditional market brands was found. (c) 2008 Institute of Chemistry, Slovak Academy of Sciences.

Exploring through cover - the integrated interpretation of high resolution aeromagnetic, airborne electromagnetic and ground gravity data from the Grant's Patch area, Eastern Goldfields Province, Archaean Yigarn Craton Part B; Gravity inversion as a

The cost and risk associated with mineral exploration in Australia increases significantly as companies move into deeper regolith-covered terrain. The ability to map the bedrock and the depth of weathering within an area has the potential to decrease this risk and increase the effectiveness of exploration programs. This paper is the second in a trilogy concerning the Grant's Patch area of the Eastern Goldfields. The recent development of the VPmg potential field inversion program in conjunction with the acquisition of high-resolution gravity data over an area with extensive drilling provided an opportunity to evaluate three-dimensional gravity inversion as a bedrock and regolith mapping tool. An apparent density model of the study area was constructed, with the ground represented as adjoining 200 m by 200 m vertical rectangular prisms. During inversion VPmg incrementally adjusted the density of each prism until the free-air gravity response of the model replicated the observed data. For the Grant's Patch study area, this image of the apparent density values proved easier to interpret than the Bouguer gravity image. A regolith layer was introduced into the model and realistic fresh-rock densities assigned to each basement prism according to its interpreted lithology. With the basement and regolith densities fixed, the VPmg inversion algorithm adjusted the depth to fresh basement until the misfit between the calculated and observed gravity response was minimised. The resulting geometry of the bedrock/regolith contact largely replicated the base of weathering indicated by drilling with predicted depth of weathering values from gravity inversion typically within 15% of those logged during RAB and RC drilling.

Weight of gravity - The bodies and the gestores in Galician-Portuguese Medieval poetry

Portuguese version: http://hdl.handle.net/10362/3593

Front and domain growth in the presence of gravity

Front and domain growth of a binary mixture in the presence of a gravitational field is studied. The interplay of bulk- and surface-diffusion mechanisms is analyzed. An equation for the evolution of interfaces is derived from a time-dependent Ginzburg-Landau equation with a concentration-dependent diffusion coefficient. Scaling arguments on this equation give the exponents of a power-law growth. Numerical integrations of the Ginzburg-Landau equation corroborate the theoretical analysis.

Gauge group and reality conditions in Ashtekar's complex formulation of canonical gravity

We discuss reality conditions and the relation between spacetime diffeomorphisms and gauge transformations in Ashtekars complex formulation of general relativity. We produce a general theoretical framework for the stabilization algorithm for the reality conditions, which is different from Diracs method of stabilization of constraints. We solve the problem of the projectability of the diffeomorphism transformations from configuration-velocity space to phase space, linking them to the reality conditions. We construct the complete set of canonical generators of the gauge group in the phase space which includes all the gauge variables. This result proves that the canonical formalism has all the gauge structure of the Lagrangian theory, including the time diffeomorphisms.

Mode decomposition and renormalization in semiclassical gravity

We compute the influence action for a system perturbatively coupled to a linear scalar field acting as the environment. Subtleties related to divergences that appear when summing over all the modes are made explicit and clarified. Being closely connected with models used in the literature, we show how to completely reconcile the results obtained in the context of stochastic semiclassical gravity when using mode decomposition with those obtained by other standard functional techniques.