Vibration reduction for vision systems on board unmanned aerial vehicles using a neuro-fuzzy controller

In this paper, an intelligent control approach based on neuro-fuzzy systems performance is presented, with the objective of counteracting the vibrations that affect the low-cost vision platform onboard an unmanned aerial system of rotating nature. A scaled dynamical model of a helicopter is used to simulate vibrations on its fuselage. The impact of these vibrations on the low-cost vision system will be assessed and an intelligent control approach will be derived in order to reduce its detrimental influence. Different trials that consider a neuro-fuzzy approach as a fundamental part of an intelligent semi-active control strategy have been carried out. Satisfactory results have been achieved compared to those obtained by means of vibration reduction passive techniques.

Aerial Coverage Path Planning applied to Mapping

In the last decade we have seen how small and light weight aerial platforms - aka, Mini Unmanned Aerial Vehicles (MUAV) - shipped with heterogeneous sensors have become a 'most wanted' Remote Sensing (RS) tool. Most of the off-the-shelf aerial systems found in the market provide way-point navigation. However, they do not rely on a tool that compute the aerial trajectories considering all the aspects that allow optimizing the aerial missions. One of the most demanded RS applications of MUAV is image surveying. The images acquired are typically used to build a high-resolution image, i.e., a mosaic of the workspace surface. Although, it may be applied to any other application where a sensor-based map must be computed. This thesis provides a study of this application and a set of solutions and methods to address this kind of aerial mission by using a fleet of MUAVs. In particular, a set of algorithms are proposed for map-based sampling, and aerial coverage path planning (ACPP). Regarding to map-based sampling, the approaches proposed consider workspaces with different shapes and surface characteristics. The workspace is sampled considering the sensor characteristics and a set of mission requirements. The algorithm applies different computational geometry approaches, providing a unique way to deal with workspaces with different shape and surface characteristics in order to be surveyed by one or more MUAVs. This feature introduces a previous optimization step before path planning. After that, the ACPP problem is theorized and a set of ACPP algorithms to compute the MUAVs trajectories are proposed. The problem addressed herein is the problem to coverage a wide area by using MUAVs with limited autonomy. Therefore, the mission must be accomplished in the shortest amount of time. The aerial survey is usually subject to a set of workspace restrictions, such as the take-off and landing positions as well as a safety distance between elements of the fleet. Moreover, it has to avoid forbidden zones to y. Three different algorithms have been studied to address this problem. The approaches studied are based on graph searching, heuristic and meta-heuristic approaches, e.g., mimic, evolutionary. Finally, an extended survey of field experiments applying the previous methods, as well as the materials and methods adopted in outdoor missions is presented. The reported outcomes demonstrate that the findings attained from this thesis improve ACPP mission for mapping purpose in an efficient and safe manner.

Aerial Coverage Path Planning applied to Mapping

In the last decade we have seen how small and light weight aerial platforms - aka, Mini Unmanned Aerial Vehicles (MUAV) - shipped with heterogeneous sensors have become a 'most wanted' Remote Sensing (RS) tool. Most of the off-the-shelf aerial systems found in the market provide way-point navigation. However, they do not rely on a tool that compute the aerial trajectories considering all the aspects that allow optimizing the aerial missions. One of the most demanded RS applications of MUAV is image surveying. The images acquired are typically used to build a high-resolution image, i.e., a mosaic of the workspace surface. Although, it may be applied to any other application where a sensor-based map must be computed. This thesis provides a study of this application and a set of solutions and methods to address this kind of aerial mission by using a fleet of MUAVs. In particular, a set of algorithms are proposed for map-based sampling, and aerial coverage path planning (ACPP). Regarding to map-based sampling, the approaches proposed consider workspaces with different shapes and surface characteristics. The workspace is sampled considering the sensor characteristics and a set of mission requirements. The algorithm applies different computational geometry approaches, providing a unique way to deal with workspaces with different shape and surface characteristics in order to be surveyed by one or more MUAVs. This feature introduces a previous optimization step before path planning. After that, the ACPP problem is theorized and a set of ACPP algorithms to compute the MUAVs trajectories are proposed. The problem addressed herein is the problem to coverage a wide area by using MUAVs with limited autonomy. Therefore, the mission must be accomplished in the shortest amount of time. The aerial survey is usually subject to a set of workspace restrictions, such as the take-off and landing positions as well as a safety distance between elements of the fleet. Moreover, it has to avoid forbidden zones to y. Three different algorithms have been studied to address this problem. The approaches studied are based on graph searching, heuristic and meta-heuristic approaches, e.g., mimic, evolutionary. Finally, an extended survey of field experiments applying the previous methods, as well as the materials and methods adopted in outdoor missions is presented. The reported outcomes demonstrate that the findings attained from this thesis improve ACPP mission for mapping purpose in an efficient and safe manner.

Reflectance properties analysis of mineral based mortars for renders: research of their energy performance

Passive performance of buildings is nowadays one of the key points, not only for reducing energy consumption of buildings, but also for decreasing “fuel poverty”. Among the constructive systems in buildings, façades are the ones having higher influence on thermal performance in urban spaces. Lime renders are specialized systems which can improve not only the durability of the support but also the thermal properties. According to previous researches, a modification of their radiative properties can reduce thermal fluxes between 24% and 89%. In this paper, the influences of the aggregate content in lime pastes, as well as the nature of the aggregates, colour and roughness, on the visible near and medium infrared reflectance are analyzed. Ten types of aerial lime mortars were prepared and two methods of reflectance determination were performed. Finally, the effect of the resulted reflectance on the constructive systems of façades was analyzed using pseudotime-dependent software, for which an annulation of the thermal fluxes or significant reduction of them can be observed, when modifying the aggregate nature.

Hardware timestamping for image acquisition system based on FlexRIO and IEEE 1588 v2 Standard

Current fusion devices consist of multiple diagnostics and hundreds or even thousands of signals. This situation forces on multiple occasions to use distributed data acquisition systems as the best approach. In this type of distributed systems, one of the most important issues is the synchronization between signals, so that it is possible to have a temporal correlation as accurate as possible between the acquired samples of all channels. In last decades, many fusion devices use different types of video cameras to provide inside views of the vessel during operations and to monitor plasma behavior. The synchronization between each video frame and the rest of the different signals acquired from any other diagnostics is essential in order to know correctly the plasma evolution, since it is possible to analyze jointly all the information having accurate knowledge of their temporal correlation. The developed system described in this paper allows timestamping image frames in a real-time acquisition and processing system using 1588 clock distribution. The system has been implemented using FPGA based devices together with a 1588 synchronized timing card (see Fig.1). The solution is based on a previous system [1] that allows image acquisition and real-time image processing based on PXIe technology. This architecture is fully compatible with the ITER Fast Controllers [2] and offers integration with EPICS to control and monitor the entire system. However, this set-up is not able to timestamp the frames acquired since the frame grabber module does not present any type of timing input (IRIG-B, GPS, PTP). To solve this lack, an IEEE1588 PXI timing device its used to provide an accurate way to synchronize distributed data acquisition systems using the Precision Time Protocol (PTP) IEEE 1588 2008 standard. This local timing device can be connected to a master clock device for global synchronization. The timing device has a buffer timestamp for each PXI trigger line and requires tha- a software application assigns each frame the corresponding timestamp. The previous action is critical and cannot be achieved if the frame rate is high. To solve this problem, it has been designed a solution that distributes the clock from the IEEE 1588 timing card to all FlexRIO devices [3]. This solution uses two PXI trigger lines that provide the capacity to assign timestamps to every frame acquired and register events by hardware in a deterministic way. The system provides a solution for timestamping frames to synchronize them with the rest of the different signals.

Using the Cross-Entropy Method for Control Optimization: A Case Study of See-and-Avoid on Unmanned Aerial Vehicles

This paper presents an adaptation of the Cross-Entropy (CE) method to optimize fuzzy logic controllers. The CE is a recently developed optimization method based on a general Monte-Carlo approach to combinatorial and continuous multi-extremal optimization and importance sampling. This work shows the application of this optimization method to optimize the inputs gains, the location and size of the different membership functions' sets of each variable, as well as the weight of each rule from the rule's base of a fuzzy logic controller (FLC). The control system approach presented in this work was designed to command the orientation of an unmanned aerial vehicle (UAV) to modify its trajectory for avoiding collisions. An onboard looking forward camera was used to sense the environment of the UAV. The information extracted by the image processing algorithm is the only input of the fuzzy control approach to avoid the collision with a predefined object. Real tests with a quadrotor have been done to corroborate the improved behavior of the optimized controllers at different stages of the optimization process.

GPS-PYMEs: Marco de Gestión de Proyectos para el desarrollo Seguro en PYMEs

En la actualidad no se concibe una empresa, por pequeña que esta sea, sin algún tipo de servicio TI. Se presenta para cada empresa el reto de emprender proyectos para desarrollar o contratar servicios de TI que soporten los diferentes procesos de negocio de la empresa. Por otro lado, a menos que los servicios de TI estén aislados de toda red, lo cual es prácticamente imposible en la actualidad, no existe un servicio o un proyecto que lo desarrolle garantizando el 100% de seguridad. Así la empresa maneja una dualidad entre desarrollar productos/servicios de TI seguros y el mantenimiento constante de sus servicios TI en estado seguro. La gestión de los proyectos para el desarrollo de los servicios de TI se aborda, en la mayoría de las empresas, aplicando distintas prácticas, utilizadas en otros proyectos y recomendadas, a tal efecto, por marcos y estándares con mayor reconocimiento. Por lo general, estos marcos incluyen, entre sus procesos, la gestión de los riesgos orientada al cumplimiento de plazos, de costes y, a veces, de la funcionalidad del producto o servicio. Sin embargo, en estas prácticas se obvian los aspectos de seguridad (confidencialidad, integridad y disponibilidad) del producto/servicio, necesarios durante el desarrollo del proyecto. Además, una vez entregado el servicio, a nivel operativo, cuando surge algún fallo relativo a estos aspectos de seguridad, se aplican soluciones ad-hoc. Esto provoca grandes pérdidas y, en ocasiones, pone en peligro la continuidad de la propia empresa. Este problema, se va acrecentando cada día más, en cualquier tipo de empresa y, son las PYMEs, por su la falta de conocimiento del problema en sí y la escasez de recursos metodológicos y técnicos, las empresas más vulnerables. Por todo lo anterior, esta tesis doctoral tiene un doble objetivo. En primer lugar, demostrar la necesidad de contar con un marco de trabajo que, integrado con otros posibles marcos y estándares, sea sencillo de aplicar en distintos tipos y envergaduras de proyectos, y que guíe a las PYMEs en la gestión de proyectos para el desarrollo seguro y posterior mantenimiento de la seguridad de sus servicios de TI. En segundo lugar, cubrir esta necesidad desarrollando un marco de trabajo que ofrezca un modelo de proceso genérico aplicable sobre distintos patrones de proyecto y una librería de activos de seguridad que sirva a las PYMEs de guía durante el proceso de gestión del proyecto para el desarrollo seguro. El modelo de proceso del marco propuesto describe actividades en los tres niveles organizativos de la empresa (estratégico, táctico y operativo). Está basado en el ciclo de mejora continua (PDCA) y en la filosofía Seguridad por Diseño, propuesta por Siemens. Se detallan las prácticas específicas de cada actividad, las entradas, salidas, acciones, roles, KPIs y técnicas aplicables para cada actividad. Estas prácticas específicas pueden aplicarse o no, a criterio del jefe de proyecto y de acuerdo al estado de la empresa y proyecto que se quiera desarrollar, estableciendo así distintos patrones de proceso. Para la validación del marco se han elegido dos PYMEs. La primera del sector servicios y la segunda del sector TIC. El modelo de proceso ha sido aplicado sobre un mismo patrón de proyecto que responde a necesidades comunes a ambas empresas. El patrón de proceso ha sido valorado en los proyectos elegidos en ambas empresas, antes y después de su aplicación. Los resultados del estudio, después de su aplicación en ambas empresas, han permitido la validación del patrón de proceso, en la mejora de la gestión de proyecto para el desarrollo seguro de TI en las PYMEs. ABSTRACT Today a company without any IT service is not conceived, even if it is small either. It presents the challenge for each company to undertake projects to develop or contract IT services that support the different business processes of the company. On the other hand, unless IT services are isolated from whole network, which is virtually impossible at present, there is no service or project, which develops guaranteeing 100% security. So the company handles a duality, develop products / insurance IT services and constant maintenance of their IT services in a safe state. The project management for the development of IT services is addressed, in most companies, using different practices used in other projects and recommended for this purpose by frameworks and standards with greater recognition. Generally, these frameworks include, among its processes, risk management aimed at meeting deadlines, costs and, sometimes, the functionality of the product or service. However, safety issues such as confidentiality, integrity and availability of the product / service, necessary for the project, they are ignored in these practices. Moreover, once the service delivered at the operational level, when a fault on these safety issues arise, ad-hoc solutions are applied. This causes great losses and sometimes threatens the continuity of the company. This problem is adding more every day, in any kind of business and SMEs are, by their lack of knowledge of the problem itself and the lack of methodological and technical resources, the most vulnerable companies. For all these reasons, this thesis has two objectives. Firstly demonstrate the need for a framework that integrated with other possible frameworks and standards, it is simple to apply in different types and wingspans of projects, and to guide SMEs in the management of development projects safely, and subsequent maintenance of the security of their IT services. Secondly meet this need by developing a framework that provides a generic process model applicable to project different patterns and a library of security assets, which serve to guide SMEs in the process of project management for development safe. The process model describes the proposed activities under the three organizational levels of the company (strategic, tactical and operational). It is based on the continuous improvement cycle (PDCA) and Security Design philosophy proposed by Siemens. The specific practices, inputs, outputs, actions, roles, KPIs and techniques applicable to each activity are detailed. These specific practices can be applied or not, at the discretion of the project manager and according to the state of the company and project that the company wants to develop, establishing different patterns of process. Two SMEs have been chosen to validate the frame work. The first of the services sector and the second in the ICT sector. The process model has been applied on the same pattern project that responds to needs common to both companies. The process pattern has been valued at the selected projects in both companies before and after application. The results of the study, after application in both companies have enabled pattern validation process, improving project management for the safe development of IT in SMEs.

3D Maize Plant Reconstruction Based on Georeferenced Overlapping LiDAR Point Clouds

3D crop reconstruction with a high temporal resolution and by the use of non-destructive measuring technologies can support the automation of plant phenotyping processes. Thereby, the availability of such 3D data can give valuable information about the plant development and the interaction of the plant genotype with the environment. This article presents a new methodology for georeferenced 3D reconstruction of maize plant structure. For this purpose a total station, an IMU, and several 2D LiDARs with different orientations were mounted on an autonomous vehicle. By the multistep methodology presented, based on the application of the ICP algorithm for point cloud fusion, it was possible to perform the georeferenced point clouds overlapping. The overlapping point cloud algorithm showed that the aerial points (corresponding mainly to plant parts) were reduced to 1.5%–9% of the total registered data. The remaining were redundant or ground points. Through the inclusion of different LiDAR point of views of the scene, a more realistic representation of the surrounding is obtained by the incorporation of new useful information but also of noise. The use of georeferenced 3D maize plant reconstruction at different growth stages, combined with the total station accuracy could be highly useful when performing precision agriculture at the crop plant level.

Integrated architecture for vision-based indoor localization and mapping of a quadrotor micro-air vehicle

Atualmente os sistemas de pilotagem autónoma de quadricópteros estão a ser desenvolvidos de forma a efetuarem navegação em espaços exteriores, onde o sinal de GPS pode ser utilizado para definir waypoints de navegação, modos de position e altitude hold, returning home, entre outros. Contudo, o problema de navegação autónoma em espaços fechados sem que se utilize um sistema de posicionamento global dentro de uma sala, subsiste como um problema desafiante e sem solução fechada. Grande parte das soluções são baseadas em sensores dispendiosos, como o LIDAR ou como sistemas de posicionamento externos (p.ex. Vicon, Optitrack). Algumas destas soluções reservam a capacidade de processamento de dados dos sensores e dos algoritmos mais exigentes para sistemas de computação exteriores ao veículo, o que também retira a componente de autonomia total que se pretende num veículo com estas características. O objetivo desta tese pretende, assim, a preparação de um sistema aéreo não-tripulado de pequeno porte, nomeadamente um quadricóptero, que integre diferentes módulos que lhe permitam simultânea localização e mapeamento em espaços interiores onde o sinal GPS ´e negado, utilizando, para tal, uma câmara RGB-D, em conjunto com outros sensores internos e externos do quadricóptero, integrados num sistema que processa o posicionamento baseado em visão e com o qual se pretende que efectue, num futuro próximo, planeamento de movimento para navegação. O resultado deste trabalho foi uma arquitetura integrada para análise de módulos de localização, mapeamento e navegação, baseada em hardware aberto e barato e frameworks state-of-the-art disponíveis em código aberto. Foi também possível testar parcialmente alguns módulos de localização, sob certas condições de ensaio e certos parâmetros dos algoritmos. A capacidade de mapeamento da framework também foi testada e aprovada. A framework obtida encontra-se pronta para navegação, necessitando apenas de alguns ajustes e testes.

Cantilever extension of ground control in strips of convergent photographs by analytical triangulation.

"Contract no. DA-44-009 Eng-2986, Department of the Army Project no. 8-35-11-106."

A Novel Framework for Real-time Traffic Flow Parameter Estimation from Aerial Videos

Thesis (Master's)--University of Washington, 2016-06

Attitudes and management of alcohol problems in general practice: Descriptive analysis based on findings of a world health organization international collaborative survey

Aims: To determine if general practitioners' (GPs) experience of education on alcohol, support in their working environment for intervening with alcohol problems, and their attitudes have an impact on the number of patients they manage with alcohol problems. Methods: 1300 GPs from nine countries were surveyed with a postal questionnaire as part of a World Health Organization (WHO) collaborative study. Results: GPs who received more education on alcohol (OR = 1.5; 95% CI, 1.3-1.7), who perceived that they were working in a supportive environment (OR = 1.6; 95% CI, 1.4-1.9), who expressed higher role security in working with alcohol problems (OR = 2.0; 95% CI, 1.5-2.5) and who reported greater therapeutic commitment to working with alcohol problems (OR = 1.4: 95% CI, 1.1-1.7) were more likely to manage patients with alcohol-related harm. Conclusion: Both education and support in the working environment need to be provided to enhance the involvement of GPs in the management of alcohol problems.

Predictors of an antibiotic prescription by GPs for respiratory tract infections: a pilot

Background. Antibiotics are over-prescribed for respiratory tract infections in Australia. Objectives. The aim of this study was to describe the clinical predictors of GPs' prescribing of antibiotics. Methods. We used Clinical Judgment Analysis to study the responses of GPs to hypothetical paper-based vignettes of a 20-year-old with a respiratory tract infection. The nature of four symptoms and signs (colour of nasal mucous discharge; soreness of the throat; presence of fever; and whether any cough was productive of sputum) was varied and their effect on prescribing measured using logistic regression. Results. Twenty GPs participated. The nature of each symptom and sign significantly predicted prescribing of an antibiotic. Cough productive of yellow sputum; presence of sore throat; fever; and coloured nasal mucus increased the probability of an antibiotic being prescribed. Conclusions. GPs are influenced by clinical signs and symptoms to use antibiotics for respiratory infections for which there is poor evidence of efficacy from the literature.

Can we get General Practitioners to Promote Physical Activity? Results of the 10,000 Steps Rockhampton Community-Based Physical Activity Promotion Project

Evidence supporting the efficacy of physical activity promotion in primary care settings has evaluated patient-level changes in physical activity, with little focus on the issue of general practitioner (GP) uptake. The 'GP Strategy' of 10,000 Steps Rockhampton provided an opportunity to explore this issue in the context of a multi-strategy, community-based physical activity intervention project. The 'GP Strategy' was developed in partnership with the Capricornia Division of General Practice. It aimed to: 1) increase GP awareness of the 10,000 Steps project, 2) upskill GPs in brief physical activity counselling techniques, and 3) provide GPs with evidencebased physical activity counselling materials and pedometers. The evaluation, which was guided by the RE-AIM evaluation framework, used a pre-post design, including a GP mailed survey, and collection of process data. Survey response rates were 67% (n=44/66; baseline) and 70% (n=37/53; 14-month follow-up). GP awareness of 10,000 Steps Rockhampton increased from 46% to 97%. 21/23 practices were visited by 10,000 Steps staff and accepted 10,000 Steps posters, brochures, and pedometers. At follow-up, 78% had displayed the poster, 81% were using the brochures, and 70% had loaned pedometers to patients. Despite the very high rate of uptake and use of 10,000 Steps materials, there was no change in the percentage of patients counselled, and relatively few pedometers had been loaned to patients. The results of this trial indicate that it will take more effort to change GP physical activity counselling behaviour, and provide only modest support for use of pedometers in the busy general practice setting. Acknowledgement:This project is supported by a grant from Health Promotion Queensland.

Privacy and the City:user identification and location semantics in location-based social networks

With the advent of GPS enabled smartphones, an increasing number of users is actively sharing their location through a variety of applications and services. Along with the continuing growth of Location-Based Social Networks (LBSNs), security experts have increasingly warned the public of the dangers of exposing sensitive information such as personal location data. Most importantly, in addition to the geographical coordinates of the user’s location, LBSNs allow easy access to an additional set of characteristics of that location, such as the venue type or popularity. In this paper, we investigate the role of location semantics in the identification of LBSN users. We simulate a scenario in which the attacker’s goal is to reveal the identity of a set of LBSN users by observing their check-in activity. We then propose to answer the following question: what are the types of venues that a malicious user has to monitor to maximize the probability of success? Conversely, when should a user decide whether to make his/her check-in to a location public or not? We perform our study on more than 1 million check-ins distributed over 17 urban regions of the United States. Our analysis shows that different types of venues display different discriminative power in terms of user identity, with most of the venues in the “Residence” category providing the highest re-identification success across the urban regions. Interestingly, we also find that users with a high entropy of their check-ins distribution are not necessarily the hardest to identify, suggesting that it is the collective behaviour of the users’ population that determines the complexity of the identification task, rather than the individual behaviour.