Use of blends of bioabsorbable poly(L-lactic acid)/poly(hydroxybutyrate- co-hydroxyvalerate) as surfaces for Vero cell culture

Vero cells, a cell line established from the kidney of the African green monkey (Cercopithecus aethiops), were cultured in F-10 Ham medium supplemented with 10% fetal calf serum at 37°C on membranes of poly(L-lactic acid) (PLLA), poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) and their blends in different proportions (100/0, 60/40, 50/50, 40/60, and 0/100). The present study evaluated morphology of cells grown on different polymeric substrates after 24 h of culture by scanning electron microscopy. Cell adhesion was also analyzed after 2 h of inoculation. For cell growth evaluation, the cells were maintained in culture for 48, 120, 240, and 360 h. For cytochemical study, the cells were cultured for 120 or 240 h, fixed, processed for histological analysis, and stained with Toluidine blue, pH 4.0, and Xylidine ponceau, pH 2.5. Our results showed that cell adhesion was better when 60/40 and 50/50 blends were used although cells were able to grow and proliferate on all blends tested. When using PLLA/PHBV (50/50) slightly flattened cells were observed on porous and smooth areas. PLLA/PHBV (40/60) blends presented flattened cells on smooth areas. PLLA/PHBV (0/100), which presented no pores, also supported spreading cells interconnected by thin filaments. Histological sections showed that cells grew as a confluent monolayer on different substrates. Cytochemical analysis showed basophilic cells, indicating a large amount of RNA and proteins. Hence, we detected changes in cell morphology induced by alterations in blend proportions. This suggests that the cells changed their differentiation pattern when on various PLLA/PHBV blend surfaces.

Effectiveness of cleaning and sanitizing procedures in controlling the adherence of Pseudomonas fluorescens, Salmonella Enteritidis, and Staphylococcus aureus to domestic kitchen surfaces

The effectiveness of cleaning and sanitizing procedures in controlling Staphylococcus aureus, Salmonella Enteritidis, and Pseudomonasfluorescens adhered to granite and stainless steel was evaluated. There was no significant difference (p > 0.05) in the adherence of pure cultures of these microorganisms to stainless steel. The numbers of P. fluorescens and S. Enteritidis adhered to granite were greater (p < 0.05) than the numbers of S. aureus. Additionally, the adherence of P. fluorescens was similar to the adherence of S. Enteritidis on granite surface. In a mixed culture with P. fluorescens, S aureus adhered less (p < 0.05) to stainless steel surfaces (1.31 log CFU.cm-2) than when in a pure culture (6.10 log CFU.cm-2). These results suggest that P. fluorescens inhibited the adherence of S. aureus. However, this inhibition was not observed in the adherence process for granite. There was a significant difference (p < 0.05) between the number of adhered cells before and after pre-washing for S. aureus on stainless steel and granite surfaces, and after washing with detergent for all microorganisms and surfaces. The efficiency of the cleaning plus sanitizing procedures was not significantly different (p > 0.05) between the surfaces. However, a significant difference was observed (p < 0.05) between the sanitizer solutions. Sodium hypochlorite and peracetic acid were more bactericidal (p < 0.05) than a quaternary ammonium compound. With regard to microorganisms, S. aureus was the least resistant to the sanitizers. These results show the importance of good cleaning and sanitization procedures to prevent bacterial adherence and biofilm formation.

Analysis of Automotive Cybersecurity - Attack surfaces and users’ privacy concerns

Modern automobiles are no longer just mechanical tools. The electronics and computing services they are shipping with are making them not less than a computer. They are massive kinetic devices with sophisticated computing power. Most of the modern vehicles are made with the added connectivity in mind which may be vulnerable to outside attack. Researchers have shown that it is possible to infiltrate into a vehicle’s internal system remotely and control the physical entities such as steering and brakes. It is quite possible to experience such attacks on a moving vehicle and unable to use the controls. These massive connected computers can be life threatening as they are related to everyday lifestyle. First part of this research studied the attack surfaces in the automotive cybersecurity domain. It also illustrated the attack methods and capabilities of the damages. Online survey has been deployed as data collection tool to learn about the consumers’ usage of such vulnerable automotive services. The second part of the research portrayed the consumers’ privacy in automotive world. It has been found that almost hundred percent of modern vehicles has the capabilities to send vehicle diagnostic data as well as user generated data to their manufacturers, and almost thirty five percent automotive companies are collecting them already. Internet privacy has been studies before in many related domain but no privacy scale were matched for automotive consumers. It created the research gap and motivation for this thesis. A study has been performed to use well established consumers privacy scale – IUIPC to match with the automotive consumers’ privacy situation. Hypotheses were developed based on the IUIPC model for internet consumers’ privacy and they were studied by the finding from the data collection methods. Based on the key findings of the research, all the hypotheses were accepted and hence it is found that automotive consumers’ privacy did follow the IUIPC model under certain conditions. It is also found that a majority of automotive consumers use the services and devices that are vulnerable and prone to cyber-attacks. It is also established that there is a market for automotive cybersecurity services and consumers are willing to pay certain fees to avail that.

GaN- ja AlGaN-puolijohteiden pintaominaisuuksista ja niiden muokkauksesta

Yhdistepuolijohde galliumnitridi (GaN) on energiatehokkaiden valkoisten ledien päämateriaali. GaN on kestävä materiaali; sillä on muun muassa alhainen säteilyreagointi ja suuri jännitekestävyys, minkä vuoksi GaN soveltuu hyvin myös maanpuolustus- ja avaruussovelluksiin. Sen iso energia-aukko mahdollistaa materiaalin käytön suurteho- ja suurtaajuussovelluksissa, ja sen suuri lämpökapasiteetti ja lämmönjohtavuuskyky avaavat edelleen uusia mahdollisuuksia materiaalin käytölle muun muassa tehovahvistimissa mikroaaltotaajuudella. GaN:ä käytetään myös sinisten ja violettien ledien valmistuksessa. Kun yhdisteeseen lisätään alumiinia, saadaan alumiinigalliumnitridin (AlGaN) energia-aukkoa ja muita ominaisuuksia säädeltyä alumiinin määrää muuttamalla. AlGaN-pintojen ominaisuuksia on tutkittu suhteellisen vähän, vaikka niiden merkitys kasvaa jatkuvasti kehitettäessä nanoteknologian sovelluksia. AlGaN-pintojen tutkiminen on tärkeää, koska monissa sovelluksissa juuri pinnat ja rajapinnat ovat huomattavassa asemassa laitteiden toiminnan kannalta. Pinnoilla sijaitseva atomien epäjärjestys, kidevirheet ja epäpuhtausatomit sekä atomien kemiallinen sidosympäristö kiinnostavat tutkijoita. Myös erilaisten pintakäsittelyjen vaikutusten tunteminen edellä mainittuihin ominaisuuksiin on tärkeää hyvien pintojen valmistuksen saavuttamiseksi. Tämän pro gradu -tutkielman on tarkoitus tutustua III–V-puolijohteiden GaN:n ja AlGaN:n pintaominaisuuksiin ja niiden muokkaukseen materiaalifysiikan pintatieteen menetelmillä. Mg-piristeisille Al0,5Ga0,5N-näytteille tehdyt LEED- ja STM-mittaukset osoittavat, että AlGaN-pinnat tarjoavat hyvän lähtökohdan bulkille tyypillisten ominaisuuksien tutkimiseen. XPS- ja SR-PES-mittaukset osoittavat, että Mg-piristys vaikuttaa aktivoituvan noin 700 °C:n lämmityksessä, ja näytteet sisältävät aiemmissa tutkimuksissa havaitun vedyn lisäksi happea ja hiiltä, jotka vaikuttavat magnesiumin aktivoitumiseen ja siitä syntyvään aukkokonsentraatioon. LEED-, STM- ja resistiivisyysmittaukset tukevat tehtyjä XPS- ja SR-PES-mittauksia. Al0,5Ga0,5N-näytteen energia-aukossa sijaitsevien aktiivisten vastaanottajatilojen määritettiin sijaitsevan 200–600 meV valenssivyön maksimin yläpuolella riippuen jälkilämmityksen kestosta.

崇禎曆書 。測量全義Chong zheng li shu. — Ce liang quan yi.Collection relative au calendrier, années Chong zheng : traité de la mesure des lignes, surfaces et volumes,.

Même ouvrage.Livres 3 et 5. — Comparer Cat. imp., liv. 106, f. 21 (Xin fa suan shu, 100 livres).

Probing cell surfaces of host and nonhost species of a mycoparasite, using FITC-labeled lectins

Cell surfaces of susceptible host species (Mortierella pusllla and Cboanepilora cucurbitarum ), resistant host (Pilascolomyces articulosus ), nonhost (Mortierella candelabrum ) and the mycoparasite (Piptocepilalis virginiana) were examined for sugar distribution patterns using light and fluorescent microscopy techniques. The susceptible host, resistant host and the mycoparasite species exhibited a similar sugar distribution profile; they all showed N-acetyl glucosamine and D-glucose on their cell wall surfaces. The nonhost cell wall surface showed a positive binding reaction to FITClectins specific for N-acetyl glucosamine and also for OI.-fucose, N-acetyl galactosamine and galactose. Treatment of these fungi with mild concentrations of proteinases (both commercial as well as the mycoparasiteproteinase) resulted in the revelation of additional sugars on the fungal cell walls. The susceptible host treated with proteinase expressed higher levels of N-acetyl glucosamine and D-glucose. The susceptible host also showed the presence of OI.-fucose, N-acetyl galactosamine and galactose. The proteinasetreated susceptible host cell walls also showed an increase in the levels of attachment with the mycoparasite. Treatment of the resistant host with proteinases revealed OI.-fucose in addition to N-acetyl glucosamine and D-glucose. Treatment of the nonhost cell wall with proteinase resulted in the exposure of low levels of D-glucose, in addition to sugars found on the untreated nonhost cell wall surface. The mycoparasite treated with proteinase revealed OI.-fucose, N-acetyl galactosamine and galactose on its cell surface in addition to the sugars N-acetyl glucosamine and D-glucose. Protoplasts were isolated from hosts and nonhost fungi and their surfaces were examined for sugar distribution patterns. The susceptible host and nonhost protoplast membranes showed all the sugars (N-acetyl glucosamine, D-glucose, (It.-fucose, N-acetyl galactosamine and galactose) tested for. The resistant host protoplast membrane however, had only N-acetyl glucosamine and D-glucose exposed. This sugar distribution profile resembles that exhibited by the untreated resistant host cell wall, as well as that shown by the untreated mycoparasite cell surface. Only susceptible host protoplasts were successful in attaching to the mycoparasite surface. Resistant host protoplasts did not show any interaction with the i mycoparasite cell surface. Both susceptible as well as resistant host protoplasts were incapable of attaching to agarose beads surface-coated with specific carbohydrates. The mycoparasite however, did attach to agarose beads surface-coated with either N-acetyl glucosamine, D-glucose/Dmannose or o:,- methyl-D-mannose. The relevance of the cell wall and the protoplast membrane in the light of the present results, in reacting appropriately to bring about either a susceptible, a resistant or a nonhost response has been discussed.

New conserved vorticity integrals for moving surfaces in multi-dimensional fluid flow

For inviscid fluid flow in any n-dimensional Riemannian manifold, new conserved vorticity integrals generalizing helicity, enstrophy, and entropy circulation are derived for lower-dimensional surfaces that move along fluid streamlines. Conditions are determined for which the integrals yield constants of motion for the fluid. In the case when an inviscid fluid is isentropic, these new constants of motion generalize Kelvin’s circulation theorem from closed loops to closed surfaces of any dimension.

A Note on Ordinally Equivalent Pareto Surfaces

Assuming at least three individuals and some regularity conditions, we construct a set S* of Pareto surfaces which is an ordinal basis of the set S of all surfaces: every surface in S is ordinally equivalent to some surface in S* and all surfaces in S* are ordinally distinct.

Surfaces de Riemann compactes et formule de trace d'Eichler

Dans ce mémoire, nous étudierons quelques propriétés algébriques, géométriques et topologiques des surfaces de Riemann compactes. Deux grand sujets seront traités. Tout d'abord, en utilisant le fait que toute surface de Riemann compacte de genre g plus grand ou égal à 2 possède un nombre fini de points de Weierstrass, nous allons pouvoir conclure que ces surfaces possèdent un nombre fini d'automorphismes. Ensuite, nous allons étudier de plus près la formule de trace d'Eichler. Ce théorème nous permet de trouver le caractère d'un automorphisme agissant sur l'espace des q-différentielles holomorphes. Nous commencerons notre étude en utilisant la quartique de Klein. Nous effectuerons un exemple de calcul utilisant le théorème d'Eichler, ce qui nous permettra de nous familiariser avec l'énoncé du théorème. Finalement, nous allons démontrer la formule de trace d'Eichler, en prenant soin de traiter le cas où l'automorphisme agit sans point fixe séparément du cas où l'automorphisme possède des points fixes.