IMAGINACIÓN Y EXPERIENCIAS SOBRE PAPEL: LA CARTOGRAFÍA MENTAL Y EL ESPACIO GEOGRÁFICO

Con base en los ejemplos de representaciones mentales del espacio geográfico a diferentes escalas, elaborados por estudiantes de varias carreras de la Universidad de Costa Rica (UCR), se realizó el presente análisis.   Si bien  la cartografía mental ha sido clasificada como una técnica cuantitativa dados los análisis factoriales que de ella pueden desprenderse, el análisis que de las representaciones mentales se hace,  es totalmente cualitativo, poniéndose énfasis en  el conocimiento y la forma en que se expresan imágenes y conceptos. Pese a que la cartografía mental posee sus deficiencias, el análisis es valioso en tanto que los mapas mentales del espacio geográfico permiten representar un espacio percibido, pensado.Palabras claves: Cartografía mental, espacio geográfico, geografía del comportamiento, representaciones mentales.Abstract:Based on mental representation of geographic space draws by students from Universidad de Costa Rica (UCR) this study was realized. Even though, mental cartography has been classified as a cuantitative technique due to factorial analysis than can be derived by, the analysis done in this study is totally qualitative, emphasizing in the knowledge and shape that images and concepts are expressed. Although mental cartography has deficiencies, its analysis is valuable in the sense that mental maps of geographic places allow us to represent a percept space.Keywords: Mental cartography, geographic space, behavior geography, mental representations

Analysis of the effects of conical indentation variables on the indentation response of elastic-plastic materials through factorial design of experiment

In this work, the effects of conical indentation variables on the load-depth indentation curves were analyzed using finite element modeling and dimensional analysis. A factorial design 2(6) was used with the aim of quantifying the effects of the mechanical properties of the indented material and of the indenter geometry. Analysis was based on the input variables Y/E, R/h(max), n, theta, E, and h(max). The dimensional variables E and h(max) were used such that each value of dimensionless Y/E was obtained with two different values of E and each value of dimensionless R/h(max) was obtained with two different h(max) values. A set of dimensionless functions was defined to analyze the effect of the input variables: Pi(1) = P(1)/Eh(2), Pi(2) = h(c)/h, Pi(3) = H/Y, Pi(4) = S/Eh(max), Pi(6) = h(max)/h(f) and Pi(7) = W(P)/W(T). These six functions were found to depend only on the dimensionless variables studied (Y/E, R/h(max), n, theta). Another dimension less function, Pi(5) = beta, was not well defined for most of the dimensionless variables and the only variable that provided a significant effect on beta was theta. However, beta showed a strong dependence on the fraction of the data selected to fit the unloading curve, which means that beta is especially Susceptible to the error in the Calculation of the initial unloading slope.

Technoflow among spanish and swedish students : a confirmatory factor multigroup analysis. 'Tecnoflow en estudiantes españoles y suecos : un análisis factorial confirmatorio con análisis multigrupo'.

Este artículo pertenece a una sección de la revista dedicada a psicología social. - Resumen tomado parcialmente de la revista

Analysis of Semi-solid Processing for Metal Matrix Composite Synthesis Using Factorial Design

The main goal in this work is to conduct a quantitative analysis of the mechanical stir casting process for obtaining particulate metal matrix composites. A combined route of stirring at semi-solid state followed by stirring at liquid state is proposed. A fractional factorial design was developed to investigate the influence and interactions of factors as: time, rotation, initial fraction and particle size, on the incorporated fraction. The best incorporations were obtained with all factors at high levels, as well as that very long stirring periods have no strong influence being particle size and rotation the most important factors on the incorporated fraction. Particle wetting occurs during stirring at semisolid state, highlighting the importance of the interactions between particles and the alloy globularized phase. The role of the alloying element Mg as a wettability-promoting agent is discussed. The shear forces resulting from the stirring system is emphasized and understood as the effect of rotation itself added to the propeller blade geometry.

EVIDENCE OF VALIDITY OF THE LSB-50: CROSS-VALIDATION, FACTORIAL INVARIANCE AND EXTERNAL CRITERION ANALYSIS

The aim of this paper was to obtain evidence of the validity of the LSB-50 (de Rivera & Abuín, 2012), a screening measure of psychopathology, in Argentinean adolescents. The sample consisted of 1002 individuals (49.7% male; 50.3% female) between 12 and 18 years-old (M = 14.98; SD = 1.99). A cross-validation study and factorial invariance studies were performed in samples divided by sex and age to test if a seven-factor structure that corresponds to seven clinical scales (Hypersensitivity, Obsessive-Compulsive, Anxiety, Hostility, Somatization, Depression, and Sleep disturbance) was adequate for the LSB-50. The seven-factor structure proved to be suitable for all the subsamples. Next, the fit of the seven-factor structure was studied simultaneously? in the aforementioned subsamples through hierarchical models that imposed different constrains of equivalency?. Results indicated the invariance of the seven clinical dimensions of the LSB-50. Ordinal alphas showed good internal consistency for all the scales. Finally, the correlations with a diagnostic measure of psychopathology (PAI-A) indicated moderate convergence. It is concluded that the analyses performed provide robust evidence of construct validity for the LSB-50

Uniformity of liquid distribution in the canopy of the bean plant, using the spectrophotometric analysis

Fungal diseases are important factors limiting common bean yield. White mold is one of the main diseases caused by soil pathogens. The objective of this study was to quantify the distribution of a fungicide solution sprayed into the canopy of bean plants by spectrophotometry, using a boom sprayer with and without air assistance. The experiment was arranged in a 2 x 2 x 2 factorial (two types of nozzles, two application rates, and air assistance on and off) randomized block design with four replications. Air assistance influenced the deposition of solution on the bean plant and yield increased significantly with the increased rate of application and air assistance in the boom sprayer.

Factorial validity of the Maslach Burnout Inventory (MBI-HSS) among Spanish professionals

OBJECTIVE: To assess the factorial validity and internal consistency of the Maslach Burnout Inventory (MBI-HSS). METHODS: In a sample consisting of 705 Spanish professionals from diverse occupational sectors (health, education, police and so one), seven plausible factorial models hypothesized were compared using LISREL 8. RESULTS: The four-factor oblique solution and the three-factor oblique solution showed the best and similar fit. Deletion of Item 12 and Item 16, taking into consideration the suggestions in the manual, improved the goodness of fit for both models. The four-factor oblique model suggests that, in addition to Emotional Exhaustion (EE) and Depersonalization (DP), Personal Accomplishment (PA) consists of two components labeled here Self-Competence (Items 4, 7, 17, and 21) and the Existential Component (Items 9, 12, 18, and 19). However, the alpha coefficient was relatively low for the Self-Competence component, suggesting that it is more suitable to estimate the syndrome as a threedimensional construct. The Cronbach's alpha was satisfactory for PA (alpha =.71) and EE (alpha =.85), and moderate for DP (alpha =.58). CONCLUSIONS: The results show that the MBI-HSS offers factorial validity and its scales present internal consistency to evaluate the quality of working life for Spanish professionals.

Optimization process of polyester polymer mortars modified with recycled GFRP waste aggregates – application of factorial experiment design-

Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both: cross-linked nature of thermoset resins, which cannot be remolded, and complex composition of the composite itself, which includes glass fibres, matrix and different types of inorganic fillers. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. There are several methods to recycle GFR thermostable materials: (a) incineration, with partial energy recovery due to the heat generated during organic part combustion; (b) thermal and/or chemical recycling, such as solvolysis, pyrolisis and similar thermal decomposition processes, with glass fibre recovering; and (c) mechanical recycling or size reduction, in which the material is subjected to a milling process in order to obtain a specific grain size that makes the material suitable as reinforcement in new formulations. This last method has important advantages over the previous ones: there is no atmospheric pollution by gas emission, a much simpler equipment is required as compared with ovens necessary for thermal recycling processes, and does not require the use of chemical solvents with subsequent environmental impacts. In this study the effect of incorporation of recycled GFRP waste materials, obtained by means of milling processes, on mechanical behavior of polyester polymer mortars was assessed. For this purpose, different contents of recycled GFRP waste materials, with distinct size gradings, were incorporated into polyester polymer mortars as sand aggregates and filler replacements. The effect of GFRP waste treatment with silane coupling agent was also assessed. Design of experiments and data treatment were accomplish by means of factorial design and analysis of variance ANOVA. The use of factorial experiment design, instead of the one factor at-a-time method is efficient at allowing the evaluation of the effects and possible interactions of the different material factors involved. Experimental results were promising toward the recyclability of GFRP waste materials as polymer mortar aggregates, without significant loss of mechanical properties with regard to non-modified polymer mortars.

Optimization of HS-SPME analytical conditions using factorial design for trihalomethanes determination in swimming pool water samples

Trihalomethanes (THMs) are widely referred and studied as disinfection by-products (DBPs). The THMs that are most commonly detected are chloroform (TCM), bromodichloromethane (BDCM), chlorodibromomethane (CDBM), and bromoform (TBM). Several studies regarding the determination of THMs in swimming pool water and air samples have been published. This paper reviews the most recent work in this field, with a special focus on water and air sampling, sample preparation and analytical determination methods. An experimental study has been developed in order to optimize the headspace solid-phasemicroextraction (HS-SPME) conditions of TCM, BDCM, CDBM and TBM from water samples using a 23 factorial design. An extraction temperature of 45 °C, for 25min, and a desorption time of 5 min were found to be the best conditions. Analysis was performed by gas chromatography with an electron capture detector (GC-ECD). The method was successfully applied to a set of 27 swimming pool water samples collected in the Oporto area (Portugal). TCM was the only THM detected with levels between 4.5 and 406.5 μg L−1. Four of the samples exceeded the guideline value for total THMs in swimming pool water (100 μgL−1) indicated by the Portuguese Health Authority.

Testing Nelder-Mead Based Repulsion Algorithms for Multiple Roots of Nonlinear Systems via a Two-Level Factorial Design of Experiments

This paper addresses the challenging task of computing multiple roots of a system of nonlinear equations. A repulsion algorithm that invokes the Nelder-Mead (N-M) local search method and uses a penalty-type merit function based on the error function, known as 'erf', is presented. In the N-M algorithm context, different strategies are proposed to enhance the quality of the solutions and improve the overall efficiency. The main goal of this paper is to use a two-level factorial design of experiments to analyze the statistical significance of the observed differences in selected performance criteria produced when testing different strategies in the N-M based repulsion algorithm. The main goal of this paper is to use a two-level factorial design of experiments to analyze the statistical significance of the observed differences in selected performance criteria produced when testing different strategies in the N-M based repulsion algorithm.

The Analysis of Accounting Multipliers: The NAMEA Approach in the Case of Catalonia

The aim of this paper is the analysis of the Catalan economy (2001) with the use of a National Accounting Matrix with environmental accounts (NAMEA) for the Catalan economy with 2001 data. We will focus on the analysis of the emission multipliers and we will also analyse the impact of a 10% reduction in greenhouse emissions on emission multipliers. This emission-reduction percentage would bring the Catalan economy into compliance with the maximum emissions level allowed by the Kyoto Protocol. We consider three possible scenarios that would allow this goal to be met. First, we will simulate a 10% reduction in regional emissions and a 5% drop in the endogenous income of the multipliers' model (production, factorial and private income). Second, we will simulate a 10% reduction in emissions and a 10% increase in endogenous income. Finally, we will simulate a 10% reduction in emissions and a 5% increase in endogenous income. Additionally, we will analyse the decomposition of the emission multipliers into own effects, open effects and circular effects to capture the different channels of the emission generation process. Keywords: NAMEA, emission multipliers, Kyoto Protocol.

Quantitative analysis of image factors in a cultural heritage tourist destination

The tourism consumer’s purchase decision process is, to a great extent, conditioned by the image the tourist has of the different destinations that make up his or her choice set. In a highly competitive international tourist market, those responsible for destinations’ promotion and development policies seek differentiation strategies so that they may position the destinations in the most suitable market segments for their product in order to improve their attractiveness to visitors and increase or consolidate the economic benefits that tourism activity generates in their territory. To this end, the main objective we set ourselves in this paper is the empirical analysis of the factors that determine the image formation of Tarragona city as a cultural heritage destination. Without a doubt, UNESCO’s declaration of Tarragona’s artistic and monumental legacies as World Heritage site in the year 2000 meant important international recognition of the quality of the cultural and patrimonial elements offered by the city to the visitors who choose it as a tourist destination. It also represents a strategic opportunity to boost the city’s promotion of tourism and its consolidation as a unique destination given its cultural and patrimonial characteristics. Our work is based on the use of structured and unstructured techniques to identify the factors that determine Tarragona’s tourist destination image and that have a decisive influence on visitors’ process of choice of destination. In addition to being able to ascertain Tarragona’s global tourist image, we consider that the heterogeneity of its visitors requires a more detailed study that enables us to segment visitor typology. We consider that the information provided by these results may prove of great interest to those responsible for local tourism policy, both when designing products and when promoting the destination.

Robust Factor Analysis for Compositional Data

Factor analysis as frequent technique for multivariate data inspection is widely used also for compositional data analysis. The usual way is to use a centered logratio (clr)transformation to obtain the random vector y of dimension D. The factor model istheny = Λf + e (1)with the factors f of dimension k & D, the error term e, and the loadings matrix Λ.Using the usual model assumptions (see, e.g., Basilevsky, 1994), the factor analysismodel (1) can be written asCov(y) = ΛΛT + ψ (2)where ψ = Cov(e) has a diagonal form. The diagonal elements of ψ as well as theloadings matrix Λ are estimated from an estimation of Cov(y).Given observed clr transformed data Y as realizations of the random vectory. Outliers or deviations from the idealized model assumptions of factor analysiscan severely effect the parameter estimation. As a way out, robust estimation ofthe covariance matrix of Y will lead to robust estimates of Λ and ψ in (2), seePison et al. (2003). Well known robust covariance estimators with good statisticalproperties, like the MCD or the S-estimators (see, e.g. Maronna et al., 2006), relyon a full-rank data matrix Y which is not the case for clr transformed data (see,e.g., Aitchison, 1986).The isometric logratio (ilr) transformation (Egozcue et al., 2003) solves thissingularity problem. The data matrix Y is transformed to a matrix Z by usingan orthonormal basis of lower dimension. Using the ilr transformed data, a robustcovariance matrix C(Z) can be estimated. The result can be back-transformed tothe clr space byC(Y ) = V C(Z)V Twhere the matrix V with orthonormal columns comes from the relation betweenthe clr and the ilr transformation. Now the parameters in the model (2) can beestimated (Basilevsky, 1994) and the results have a direct interpretation since thelinks to the original variables are still preserved.The above procedure will be applied to data from geochemistry. Our specialinterest is on comparing the results with those of Reimann et al. (2002) for the Kolaproject data

Factor analysis of the North American Spine Society outcome assessment instrument: a study based on a spine registry of patients treated with lumbar and cervical disc arthroplasty.

BACKGROUND CONTEXT: Studies involving factor analysis (FA) of the items in the North American Spine Society (NASS) outcome assessment instrument have revealed inconsistent factor structures for the individual items. PURPOSE: This study examined whether the factor structure of the NASS varied in relation to the severity of the back/neck problem and differed from that originally recommended by the developers of the questionnaire, by analyzing data before and after surgery in a large series of patients undergoing lumbar or cervical disc arthroplasty. STUDY DESIGN/SETTING: Prospective multicenter observational case series. PATIENT SAMPLE: Three hundred ninety-one patients with low back pain and 553 patients with neck pain completed questionnaires preoperatively and again at 3 to 6 and 12 months follow-ups (FUs), in connection with the SWISSspine disc arthroplasty registry. OUTCOME MEASURES: North American Spine Society outcome assessment instrument. METHODS: First, an exploratory FA without a priori assumptions and subsequently a confirmatory FA were performed on the 17 items of the NASS-lumbar and 19 items of the NASS-cervical collected at each assessment time point. The item-loading invariance was tested in the German version of the questionnaire for baseline and FU. RESULTS: Both NASS-lumbar and NASS-cervical factor structures differed between baseline and postoperative data sets. The confirmatory analysis and item-loading invariance showed better fit for a three-factor (3F) structure for NASS-lumbar, containing items on "disability," "back pain," and "radiating pain, numbness, and weakness (leg/foot)" and for a 5F structure for NASS-cervical including disability, "neck pain," "radiating pain and numbness (arm/hand)," "weakness (arm/hand)," and "motor deficit (legs)." CONCLUSIONS: The best-fitting factor structure at both baseline and FU was selected for both the lumbar- and cervical-NASS questionnaires. It differed from that proposed by the originators of the NASS instruments. Although the NASS questionnaire represents a valid outcome measure for degenerative spine diseases, it is able to distinguish among all major symptom domains (factors) in patients undergoing lumbar and cervical disc arthroplasty; overall, the item structure could be improved. Any potential revision of the NASS should consider its factorial structure; factorial invariance over time should be aimed for, to allow for more precise interpretations of treatment success.

Toxicological and ultrastructural analysis of the impact of pesticides used in temperate fruit crops on two populations of Chrysoperla externa (Neuroptera, Chrysopidae)

This study aimed to evaluate the effects of (g a.i. L-1) abamectin (0.02), carbaryl (1.73), sulphur (4.8), fenitrothion (0.75), methidathion (0.4), and trichlorfon (1.5) on the survival of larvae and pupae, on the oviposition of adults and hatching of eggs from treated Chrysoperla externa third-instar larvae from two different populations (Bento Gonçalves and Vacaria, Rio Grande do Sul State, Brazil). Morphological changes caused by abamectin to eggs laid by C. externa from Vacaria population were evaluated by mean of ultrastructural analysis. The pesticides were applied on glass plates. Distilled water was used as control. For the evaluation of larvae mortality, a fully randomized experimental design in a 2 x 7 (two populations x seven treatments) factorial scheme was used, whereas for the effects of the compounds on oviposition capacity and egg viability, a 2 x 4 factorial scheme was used. Carbaryl, fenitrothion, and methidathion caused 100% mortality of larvae. Abamectin reduced the hatching of eggs from treated third-instar larvae of both populations; however, this pesticide presented highest toxicity on insects from Vacaria. The ultrastructural analysis showed that abamectin caused malformations in micropyle and in chorion external surface of C. externa eggs. Based in the total effect (E), carbaryl, fenitrothion, and methidathion are harmful to C. externa; trichlorfon is harmless to third-instar larvae, while abamectin and sulphur are harmless and slightly harmful to third-instar larvae from Bento Gonçalves and Vacaria, respectively.