Graduate of the Sheet Metal Sheet Metal Department David Harning

David Harning graduated from the Sheet Metal Department in 1957 and is shown in his position as Sheet Metal Cutter at the Triangle Sheet Metal Works Inc. Original caption reads, "David Harning - Sheet Metal 1957, is shown at his bench where he lays out all types of Sheet Metal pieces. These pieces will be constructed by other Sheet Metal Workers." Black and white photograph with captioned adhered to reverse.

Influencia do meloxicam sobre a perda ossea alveolar em periodontite experimental: avaliaçao histometrica em ratos

GURGEL, Bruno Cesar de vasconcelos.Influencia do meloxicam sobre a perda ossea alveolar em periodontite experimental: avaliaçao histometrica em ratos. 2003.97f. Dissertaçao (Mestrado) - Universidade Estadual de Campinas. Faculdade de Odontologia de Piracicaba. Piracicaba, 2003. Disponivel em: cutter.unicamp.br/document/?code=vtls000293698>. Acesso em: 04 out. 2010.

Fresamento com ar quente: uma proposta para minimizar a formação de trincas térmicas em ferramentas de metal duro

This work presents the results, analyses and conclusions about a study carried out with objective of minimizing the thermal cracks formation on cemented carbide inserts during face milling. The main focus of investigation was based on the observation that milling process is an interrupted machining process, which imposes cyclic thermal loads to the cutting tool, causing frequent stresses changes in its superficial and sub-superficial layers. These characteristics cause the formation of perpendicular cracks from cutting edge which aid the cutting tool wear, reducing its life. Several works on this subject emphasizing the thermal cyclic behavior imposed by the milling process as the main responsible for thermal cracks formation have been published. In these cases, the phenomenon appears as a consequence of the difference in temperature experienced by the cutting tool with each rotation of the cutter, usually defined as the difference between the temperatures in the cutting tool wedge at the end of the cutting and idle periods (T factor). Thus, a technique to minimize this cyclic behavior with objective of transforming the milling in an almost-continuous process in terms of temperature was proposed. In this case, a hot air stream was applied into the idle period, during the machining process. This procedure aimed to minimize the T factor. This technique was applied using three values of temperature from the hot air stream (100, 350 e 580 oC) with no cutting fluid (dry condition) and with cutting fluid mist (wet condition) using the hot air stream at 580oC. Besides, trials at room temperature were carried out. Afterwards the inserts were analyzed using a scanning electron microscope, where the quantity of thermal cracks generated in each condition, the wear and others damages was analyzed. In a general way, it was found that the heating of the idle period was positive for reducing the number of thermal cracks during face milling with cemented carbide inserts. Further, the cutting fluid mist application was effective in reducing the wear of the cutting tools.

Estudo da flamabilidade e resistência à chama de compósito de poliéster insaturado e fibra da folha do abacaxizeiro (PALF)

In the present research work, composites were prepared using pine apple leaf fibres (PALF) as reinforcement with unsaturated polyester resin as matrix, incorporating with fire retardant at different compositions. The PALF was obtained from the decortication of pine apple leaves obtained from Ramada 4 from Ielmo Marinho in the State of Rio Grande do Norte. The unsaturated polyester resin and the catalyzer were bought from the local establishment. The fire retardant, aluminium tri-hydroxide - Al(OH)3 was donated by Alcoa Alumínio S.A and was used in the proportions of 20%, 40% and 60% w/w. Initially the fibres were treated with 2% NaOH for 1 hour, to remove any impurities present on the fibre surface, such as wax, fat, pectin and pectate, in order to have a better adsorption of the fibres with the matrix as well as the flame retardant. The fibre mat was prepared in a mat preparator by immersion, developed in the Textile Engineering Laboratory, at the UFRN. The composites (300x300x3 mm) were prepared by compression molding and the samples (150x25x3 mm) for analysis of the properties were cut randomly using a laser cutter. Some of the cut samples were used to measure the smoke emission and fire resistance using UL94 standard. Mechanical tension-extension and flexural properties were carried in CTGás RN and the Laboratório de Metais e Ensaios Mecânicos Engenharia de Materiais UFRN , as well as SEM studies were carried out at Núcleo de Estudos em Petróleo e Gás Natural - UFRN . From the observed results, it was noted that, there was no marked influence of the fire retardant on the mechanical properties. Also in the water absorption test, the quantity of water absorbed was less in the sample with higher concentration of fire retardant. It was also observed that the increase in the proportion of the fire retardant increased the time of burning, may be due to the compactness of the composite due to the presence of fire retardant as a filling material even though it was meant to reduce the rate of inflammability of the composite

Efeito do trinexapac-ethyl na anatomia foliar de quatro espécies de grama

Os reguladores de crescimento podem retardar o desenvolvimento vegetativo das plantas de gramas e, assim, reduzir a frequência de cortes; contudo, existem poucas informações referentes aos efeitos desses produtos sobre as estruturas da anatomia foliar. Dessa forma, o presente trabalho teve por objetivo avaliar os efeitos da aplicação sequencial de duas doses de trinexapac-ethyl sobre a anatomia foliar das espécies de gramas São Carlos (Axonopus compressus), Batatais (Paspalum notatum), Santo Agostinho (Stenotaphrum secundatum) e Esmeralda (Zoysia japonica). Os tratamentos utilizados foram constituídos de duas aplicações sequenciais de trinexapac-ethyl nas doses de 56,5+56,5 e 113,0+113,0 g ha-1; além de uma testemunha sem aplicação, para cada espécie avaliada. Os gramados foram cortados à altura de 3 cm, com auxílio de um aparador de grama motorizado, e, em seguida, foram realizadas as aplicações dos tratamentos. Após 20 dias da primeira aplicação de trinexapac-ethyl, as parcelas foram novamente aparadas à altura de 3 cm e foi realizada a segunda aplicação dos tratamentos. O delineamento experimental utilizado foi o de blocos ao acaso, com quatro repetições. Aos 70 dias após a segunda aplicação dos tratamentos, foram realizadas as amostragens do material foliar, para as quatro espécies estudadas. Os dados das variáveis quantitativas foram submetidos ao teste estatístico multivariado de análise de componentes principais. Os resultados evidenciaram a formação de três e dois grupos principais, para os caracteres da região da quilha (nervura mediana) e da região da asa (situada entre a nervura mediana e a margem do limbo foliar), respectivamente. de modo geral, em cada formação dos agrupamentos, os tratamentos com trinexapac-ethyl apresentaram maior similaridade entre si, em relação às respectivas testemunhas. Conclui-se que a aplicação sequencial de trinexapac-ethyl alterou algumas estruturas anatômicas da região da quilha e da asa do limbo foliar das espécies de gramas estudadas.

Desenvolvimento de equipamento para controle mecânico de plantas aquáticas na UHE de Americana-SP

Os objetivos deste trabalho foram desenvolver e avaliar o rendimento operacional de um equipamento para controle de plantas aquáticas, além de estabelecer procedimentos que permitissem a otimização dessa prática na UHE de Americana-SP. O equipamento constitui-se de uma esteira de margem (3,0 m de largura x 10,0 m de comprimento) para captação e condução das plantas até um picador, que as fragmenta antes do descarte, facilitando assim sua decomposição e seu transporte. A análise realizada indicou que a capacidade operacional foi de aproximadamente 7,73 m³ h-1. Considerando-se a menor taxa de crescimento observada no histórico do reservatório, 2,27%, o sistema deveria permitir a remoção de aproximadamente 28 m³ h-1. Dessa forma, esse equipamento pode funcionar como um método auxiliar no controle das plantas aquáticas, não realizando um controle efetivo se empregado de forma isolada.

Seletividade de herbicidas aplicados nas gramas Santo Agostinho e Esmeralda

Objetivou-se neste trabalho avaliar a seletividade de herbicidas aplicados nas gramas Santo Agostinho (Stenotaphrum secundatum) e Esmeralda (Zoysia japonica) em condições de campo. O delineamento experimental utilizado foi o de blocos casualizados, com quatro repetições. As gramas foram cortadas a 3 cm de altura e, em seguida, foram feitas as aplicações dos herbicidas. Os tratamentos utilizados foram: testemunha sem aplicação, fluazifop-p-butil (125 g ha-1), sethoxydim+óleo mineral (276 g ha-1 + 0,5% v v-1 de Assist), bispyribac-sodium (25 g ha-1), chlorimuron-ethyl (15 g ha-1), ethoxysulfuron (150 g ha-1), halosulfuron (112,5 g ha-1), iodosulfuron-methyl (10 g ha-1), metsulfuron-methyl (2,4 g ha-1), nicosulfuron (125 g ha-1), pyrithiobac-sodium (140 g ha-1), trifloxysulfuron-sodium (22,5 g ha-1), 2,4-D (720 g ha-1), quinclorac (375 g ha-1), atrazina (1.250 g ha-1), bentazon (600 g ha-1), linuron (1.350 g ha-1), fomesafen (187,5 g ha-1), lactofen (120 g ha-1), oxadiazon (600 g ha-1) e oxyfluorfen (720 g ha-1). Os herbicidas que apresentaram potencial de seletividade para o gramado de S. secundatum foram: os inibidores da ALS chlorimuron-ethyl, ethoxysulfuron, halosulfuron, iodosulfuron-methyl e metsulfuron-methyl, o mimetizador de auxina 2,4-D, os inibidores do fotossistema II atrazina e bentazon, bem como os inibidores da Protox fomesafen, lactofen e o oxadiazon. Para o gramado de Z. japonica, os herbicidas que apresentaram potencial de seletividade foram: os inibidores da ALS chlorimuron-ethyl, ethoxysulfuron, halosulfuron, metsulfuron-methyl e nicosulfuron, os mimetizadores de auxina 2,4-D e quinclorac, os inibidores do fotossistema II atrazina e bentazon, além dos inibidores da Protox fomesafen, lactofen e o oxadiazon.

Sites of Defoliation by Atta sexdens rubropilosa (Hymenoptera, Formicidae) in Artificial Plants

This study aimed to achieve a better understanding about the foraging behavior of leaf-cutter ant (Atta sexdens rubropilosa Forel) workers with respect to defoliation sites in plants. To accomplish that, artificial plants 70 cm in height were prepared and divided into four levels (heights), having natural plant leaves attached to them. Evaluations during the bioassays included the number of leaves dropped by the ants, as well as the percentage of plant mass removed. In all replicates, it became evident that the most exploited plant site is the apical region, which significantly differed from other plant levels.

Study of postures in sugarcane cutters in the Pontal of Paranapanema-SP, Brazil

The expansion of sugarcane monoculture in Brazil in the last decades has pointed out to the necessity of considering the question of sugarcane cutters occupational health. In this work we present a cross-sectional study aiming to examine the occupational posture of a group of sugarcane cutters, which work in a cane field located in the region of Pontal do Paranapanema-SP, Brazil. The study was made using the Ergonomic Analysis of Work - EAW methodology and the postural analysis method by Win-OWAS. Through the obtained records of postures, it was observed that during a workday the sugarcane cutters remain standing erect on two legs or in one leg 66% of the time and that their trunk remain tilted and in rotation, according to 63% of the positions categorized. It was also observed that the sugarcane cutter trunk performs repetitive and boundless movements during his routine of work, which can expose this individual to additional wear of their musculoskeletal functions. The activities in which the individual engages have favorable or adverse influence on his posture. The repetitive movements involved in specialized occupations are equivalent to repeated exercises, thus may be responsible for the excessive development of certain muscle groups. The study suggests that the postures adopted by sugarcane cutters can overload their musculoskeletal system and predispose the cutters to work-related musculoskeletal diseases.

Vulnerabilidades socioambiental na zona de proteção ambiental 9, Natal/RN

This work aims to analyze socio-environmental vulnerability in the Zone of Environmental Preservation -9, located in the northern of the city of Natal / RN. This objective was outlined when we noted a large number of households (about 2000) located in an area considered relevant in terms of environmental and social conditions, notably because of the existence of lakes, sand dunes and rivers that contribute to groundwater recharge Dunas/Barreiras Furthermore, this area is widely used for agricultural activities. The methodology used during this research is accorded to the literature review about the concept of vulnerability, consultations in public agencies for data acquisition, field research and questionnaires. Data collected from each category of vulnerability (social and environmental) were tabulated, analyzed and presented as tables, maps and texts. According to theoretical concepts and methodology of Alves (2006), Cutter (1996), Torres (2000), Acselrad (2006) e Hogan e Marandola Junior (2005; 2006; 2007), the research is structured in the preparation of an environmental diagnosis of the neighborhoods of Blue Lagoon and Pajuçara and subsequent analysis of socio-environmental vulnerability in the Zone of Environmental Preservation -9, especially Area 1, 2 and 3.There was a variation in results between the social vulnerability and environmental vulnerability categories for each area of the Zone of Environmental Preservation -9. However, the crossing between the two categories above showed that Area 3 had the highest level of environmental vulnerability, followed by Area 1. On the other hand, the Area 2 was considered of minor environmental vulnerability. In this sense, this work presents relevant subsidies to the planning of public policies, to identify and characterize the critical areas with high socio-environmental vulnerability

Yeasts and filamentous fungi carried by the gynes of leaf-cutting ants

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Alterations following a fire in a forest community of Alto Rio Xingu

This study records the consequences of fire upon the soil and structure of the Amazonian Forest of Gaucha do Norte, Mato Grosso state, Brazil (13degrees12'S and 53degrees20'W). For this, the number of individuals sampled in 1 ha of the forest, during a phytosociological survey completed 2 days before the accidental fire, was compared with the survivors recorded afterwards in the reinventory of the area taken 2 days and 10 months after the fire. For the surveys, the area of 1 ha was subdivided into 50 plots of 10 m x 20 m, and all the individuals with circumference at breast height (CBH) greater than or equal to 15 cm were sampled. Chemical analysis of the 30 soil samples collected 2 days before the fire were compared with those obtained 15 days and 1 year after the fire. It was seen that, soon after the fire, there was a significant increase in the nutrient levels in the soil, an increase in the pH and a decrease in the aluminum toxicity. However, after 1 year, losses by lixiviation resulted in a nutrient reserve in the soil of less than that before the fire. The tree mortality was extremely high (23.98%), particularly amongst the younger individuals of the population (93.68% of the total of deaths in the period). There was no significant reduction in the forest richness analyzed: 60% of the species had reduced populations after the fire, but just four species were locally extinct. Results, however, demonstrated a role for fire in the selection of resistant species or those adapted to fires, since some species demonstrated a greater tolerance to the fire than others. (C) 2003 Elsevier B.V. B.V. All rights reserved.

Effect of the surface treatment of plain carbon fiber posts on the retention of the composite core: an in vitro evaluation

Foi avaliado o possível efeito de tratamentos superficiais em pinos de fibra de carbono lisos, quando comparados aos pinos serrilhados, na retenção à resina composta empregada na confecção de núcleos de preenchimento. Foram utilizados cinqüenta pinos de fibra de carbono, divididos em cinco grupos: os quatro primeiros grupos eram constituídos por pinos do tipo liso, cujas superfícies foram tratadas, e o último grupo por dez pinos do tipo serrilhado. Foram desenvolvidas matrizes de resina acrílica com um leito ajustado para conter o pino, com um alargamento na porção coronária para posterior preenchimento com resina composta. Após o tratamento superficial, todos os pinos receberam camadas de primer, foram secos e então ajustados à matriz de resina, colocando-se a resina composta autopolimerizável na porção coronária para um núcleo de preenchimento de 3 mm. As amostras foram submetidas a termociclagem e armazenadas em água destilada por uma semana. Os espécimes foram testados por meio de ensaios mecânicos de tração, à velocidade de 0,5 mm/min, até o deslocamento do conjunto ou a fratura da resina do núcleo. As conclusões foram as seguintes: a) o tratamento superficial nos grupos tratados por meio de jateamento (Grupo A), pontas diamantadas marcadoras de profundidade para facetas laminadas (Grupo C) e alteração da morfologia da extremidade coronária (Grupo D) conferiu aos pinos lisos valores de retenção comparáveis aos dos pinos serrilhados (Grupo E) nos ensaios de tração, porém sem diferença estatisticamente significativa entre estes grupos; b) os pinos tratados por meio de pontas diamantadas de granulação média (Grupo B) obtiveram valores de retenção menores que os demais grupos.

Deciphering the weathering processes using environmental mineralogy and geochemistry: Towards an integrated model of laterite and podzol genesis in the Upper Amazon Basin

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)